Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.8 Cr
EMD Value
₹2.8 L
Closing Date
21 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Ambica Division, Navsari
CONSTRUCTION OF CR HR Cum Fall @,Ch.6538 mt (21.44 RD), CR Cum Fall H.R-V.R.B.@ Ch. 12772.00 mt & CR Cum Fall Escape-V.R.B.@ Ch. 13910 .00 mt on Navsari Branch Canal
364301
4 of 2026-27
Open
Civil Works - Canal
Works
Navsari
14 documents required · 14 mandatory
₹3,600
Executive Engineer, Ambica Division, Navsari
₹2.8 L
7 Nov 2026
7 Nov 2026
7 Nov 2026
21 Nov 2026
7 Nov 2026
120 days
Name of Work: - CONSTRUCTION OF CR HR Cum Fall @,Ch.6538 mt (21.44 RD), CR Cum Fall
H.R-V.R.B.@ Ch. 12772.00 mt & CR Cum Fall Escape-V.R.B.@ Ch. 13910 .00 mt on Navsari Branch
Memorandum showing items of work to be carried out
Quantities Total Amount
Quantities Total Amount
Item Estimated according to
Item of work In figure Unit
No. but may be In words Estimated
more or less Quantities
Dismentalling the existing stone masonry including
sorting out and stacking the useful materials and Seven Hundred
1 216 removing the debries and making good the 757.4 Fifty Seven and M3
damage etc.complete as directed. (b) in cement four Paisa Only
Dismentalling the existing Foundation concrete
including sorting out and stacking the useful
Three Hundred Ten
2 30 materials and removing the debries and making 1310.8 M3
and Eight Paisa
good the damage etc.complete as directed. (C) RCC
for super structure.
Removing of existing disturbed C.C. lining including
opening of joints, stacking the same and disposing of Twenty Nine and
3 662 stuff as directed etc. complete with all leads and lifts. 29.1 M3
Excavation for foundation in all sorts of soil including
yellow, sandy, gravelly soil, soft & hard
murrum, etc. dry condition including depositing
the excavated stuff in uniform layers in banks or as Eighty One and
directed etc. complete for lead uo to 1.0 Km and Five Paisa
all lifts. (By machinery) (a) Above water table.
EExcavation of canal/drains in all sorts of soils
(including wet and slushy condition of soil)
including depositing the excavated stuff in
uniform layers in canal banks or in spoil banks or as
5 1001 and where directed including dressing the canal 82.4 M3
section upto lead of 50 meter and all lift including
clearing the site etc. complete (By machinery for
canal/drain maintanance) (up to 1.5 cumecs
capacity of canal/drain)
Providing and laying plain/ reinforced Design Mix
cement concrete of various grade with cement,
sand and coarse aggregates including centering,
6 shuttering, batching, mixing, transporting, placing,
vibrating, smooth finishing, curing etc.
complete for all lead and lift.(Baching Plant
53.95 3836 Eight Hundred M3
10(A) FOUNDATION (ii) M-10 grade Concrete. Thirty Six Only
10(B) Raft, Bottom slab of barel, footing of
columns, piers, abutment and bottom slab of sump
Quantities Total Amount
Quantities Total Amount
Item Estimated according to
Item of work In figure Unit
No. but may be In words Estimated
more or less Quantities
Eighty and Nine
(i) M-15 grade Paisa Only
ninty and paisa one
(ii) M-20 grade Only
fourty four and
(ii) M-25 grade paisa seven Only
four Thousand four
nine and paisa six
(ii) M-15 grade Only
10 ( D )Walls of barrels brest walls,
staunching rings, pedustels of bearings,
stoplog piers, well staining ,transition wall etc.
five Thousand two
283 5228 Hundred twenty M3
fifty three and paisa
(ii) M-25 grade six Only
(E) Roadway slab, approch salb, chute floor slab,
kerb, pier cap, abutment cap, hoisting platform,
top slab of barrel etc. (i) M-15 grade.
four Thousand six
6 4685.1 Hundred eighty five M3
and paisa one Only
five Thousand two
171.03 5206.3 Hundred six and M3
paisa three Only
(ii) M-25 grade
(F) Top slab of bridge with main and cross
girder of bridge etc.
five Thousand nine
3.05 (ii) M-25 grade 5905.8 Hundred five and M3
paisa eight Only
Providing and placing in position
reinforcement bars including cutting, bending seven Thousand
7 1321.82 welding, joints where necessary, hooking etc. 7194 one Hundred ninty Qtl
Complete as per drawing for all lead and lifts(b) four Only
Quantities Total Amount
Quantities Total Amount
Item Estimated according to
Item of work In figure Unit
No. but may be In words Estimated
more or less Quantities
Providing and fixing in position PVC heavy duty
water stops in barrels, trough, and wing wall with
mm wide expension joint as shown in drawing three Hundred
8 137.1 including filling the joints with asphalt pad or 384.9 eighty four and Rmt.
bitumins or cork board of approved quality. (A) 225 paisa nine Only
mm wide PVC water stop.
Providing and fixing in position pre moulded asphalt
or bitumin cork board of approved quality and
specification as per design and drawing as directed.
9 122.19 1007.4 seven and paisa SM
(D) 12mm thickness. complete.(By machinary)
complete.(By machinary)
Providing and filling the polysulphide joint
five Thousand nine
selent of the approved make in the expansion
10 321.75 533 Hundred five and M
and contraction joints in the c.c. lining including
paisa eight Only
clearing the joints with air water jet
Providing and fixing in position 110 mm dia PVC Two Hundred
11 2 pipe weep holes in abutment, wing wall, and 263.7 sixty three and Rmt
laying training etc. complete paisa seven Only
Back fiing the foundation trenches around the
structures etc. with selected excavated stuff ninteen and paisa
including watering, ramming, compacting five Only
etc. complete.(By machinary)
Providing & fixing in position sign board of
standard size of 1.20mx0.90m with M.S
angle 40mmx40mmx6mm with 3mm thick iron Three Thousand
13 3 plate including fixing in 1:5:10 prop. Concrete 3011.3 eleven and paisa No
block size 40cmx40cmx75 cm including painting Three Only
existing data on the board etc.complete as
Supplying of graded stone aggregates of following two hundred ninty
14 5.88 size ( for W.B.M. road ) (2) Hand Broken stone 299.47 nine and forty M3
aggregates 40mm to 63 mm. seven only
Spreading the stone aggregate for soiling and
two hunderd sisty
W.B.M. including filling the interstices forming
two and paisa five
15 5.88 the surface to required camber & gradient 262.519 M3
hundred ninteen
(excluding spreading of Blindage) (ii) 40 mm to
mm size aggregates (H.B.)
Providing gauge plate of following size of
material fibre glass reinforced plastic with fourteen Thousand
engraved bands width and figures with seven Hundred
necessary clits and fastenersand fixing the same at eighty six and paisa
the site of work etc complete as directed. For 0.60 sixty one Only
mt. x 1.0 mt. gauge patti
Quantities Total Amount
Quantities Total Amount
Item Estimated according to
Item of work In figure Unit
No. but may be In words Estimated
more or less Quantities
Construction of Granular sub-base 150 mm thick
by providing coarse graded machine crushed
B.T.material satisfying MOST specification of
grading I (B.T.stone aggregate 53 mm to
mm 35%,26.5 to 4.75 mm-45% and 2.36 mm eight hunderd four
below-20%) including spreading in uniform and paisa four only
layer with motor grader on prepared
surface,mixing by mix in place method with
rotavator at OMC and compacting with vibratory
roller to achive the desired density etc. complete.
Construction of Granular sub-base 150 mm
thick by providing coarse graded machine
crushed B.T.material satisfying MOST
specification of grading I (B.T.stone aggregate 53 nine hunderd
mm to 26.5 mm 35%,26.5 to 4.75 mm-45% and eighteen only
2.36 mm below-20%) including spreading in
uniform layer with motor grader on
Providing and fixing in position (different diameter)
NP3 R.C.C. pipe with collar including filling and
caulking the joints with cement mortar 1:1
18 10 4821 eight Hundred Rmt
proportion, finishing to design grade and level curing
twenty one Only
etc. complete for all leads and lifts 1000 mm dia pipe
Providing and Erecting a "W" metal beam
CRASH BARRIER comprising of 3mm thick
corrugated sheet metal beam rail, 70cm above
road/ground level fixed on ISMC series channel
vertical post ,150 x 75x5 mm space 2.00 m
centre to centre 1.80 m high 1.10 m below
ground/road level fixing at site shall be in
C.C.M-20 block of size 50x50x100 cms for each
post .All steel part sand fitments to be
galvanized by hot dip process, all fitting to
19 64 conform IS:1367 and IS:1364 metal beam rai to 3496.62 Rmt
ninty six and paisa
be fixed on the vertical post with as pacer of
section 150x75x5 mm 3.30 m long complete as
per MORTH Clause 810. Rates including
providing and fixing 3mm thick ACM type
reflactor 100 mm wide, type4 ,class-B ,High
inensity grade sheetin between two 'W' metal
beam throught and reflactive unit at the top of
vertical post as per IRC:67 2012 etc .complete as
per detailed drawing and directed by engineer-in
charge. (Metal beam crash barrier for approch)
Finishing wall with weather proof exterior
emulsion paint on wall surface (two coats) to
give an required shape even shade after
20 168 117.4 seventeen and paisa SM
thoroughly brushing the surface to remove all
dirt, and remains of loose powdered
materials.etc complete
Quantities Total Amount
Quantities Total Amount
Item Estimated according to
Item of work In figure Unit
No. but may be In words Estimated
more or less Quantities
Care and diversion of Canal including required 1.5% of
dewatering during construction of CD works and estimate
21 1 allied works as prescribed and directed etc. cost of L.S.
complete. (Including credit of usable NP pipe after Ch:13910.00
completing of work) mt Strcture
Providing videogrphy on the occasion of
one Thousand two
function or for ongoing construction work
22 8 1230.51 Hundred thirty and Hrs.
including dubbing, titling etc.complete including
paisa fifty one Only
cost of cassate/CD. (b) up to 4.0 hours
Fabrication, Supply, Erection, Testing and
commissioning of Vertical Slide Type Gate including
Hoisting Mechanism, Gate Leaf, Embeded parts with
second stage concret at C.R CUM FALL @ CH.
RD OFF TAKING FROM NAVSARI BRANCH CANAL @
three lacs fourteen
21.44 RD (6538.0 m) with all accessories, including
23 3 cost of all materials, machinery, labour, cutting, 314920 Job
bending, aligning, welding, finishing,cleaning,
painting, seal fixing etc., complete as per
specifications and approved drawings with all leads
and lifts. Gate Size 2.00 mt. X 1.50 mtr- (3 Nos )
Fabrication, Supply, Erection, Testing and
commissioning of Vertical Slide Type Gate
including Hoistting Mechanism, Gate Leaf,
Embeded parts with second stage concret at HR
OF VACHHARVAD MINOR CANAL OFFTAKING two lacs eleven
FROM NAVSARI BRANCH CANAL @21.44 RD Thousand four
(6538 m) with all accessories, including cost of all Hundred fourty one
materials, machinery, labour, cutting, bending, Only
aligning, welding, finishing,cleaning, painting, seal
fixing etc., complete as per specifications and
approved drawings with all leads and lifts. Gate
Size 1.20 mt. X 1.20 mtr- (1 Nos )
Providing, Fabricating & Erecting new Gate
assembly, Embedded parts, Hoist mechanism & two lacs eleven
hoist platform etc. as per Drawings, specifications Thousand four
and instruction of engineer in charge for C.R. Gate Hundred fourty one
(Size: 2.35 Meter X 1.50 Meter- 3 Nos.) at Chainage Only
13910 Meter of Navsari Branch Canal
Quantities Total Amount
Quantities Total Amount
Item Estimated according to
Item of work In figure Unit
No. but may be In words Estimated
more or less Quantities
Providing, Fabricating & Erecting new Gate
assembly, Embedded parts, Hoist mechanism &
three lacs twelve
hoist platform etc. as per Drawings, specifications
26 1 312057 Thousand fifty Gate
and instruction of engineer in charge for H.R. Gate
(Size: 1.50 Meter X 1.50 Meter- 1 Nos.) at
Chainage 13910 Meter of Navsari Branch Canal
Providing, Fabricating & Erecting Gate Assembly,
Embedded parts,Stem Rod, 2 MT Hoist and Hub &
hoist platform etc. completeincluding cost of
four lacs thirty six
materials, Labour, Tools & tackle,
27 3 Scafoldings,Painting, Material handling, Safety 436521 Gate
equipments as per the drawings,specifications and
instruction of engineer incharge for C.R. Gate
(Size:2.35 Meter X 1.50 Meter- 3 Nos.) at Chainage
12772 Meter of NavsariBranch Cana
Providing, Fabricating & Erecting Gate Assembly,
Embedded parts,Stem Rod, 2 MT Hoist and Hub &
hoist platform etc. completeincluding cost of
two lacs eighty one
materials, Labour, Tools & tackle,
28 1 Scafoldings,Painting, Material handling, Safety 281347 Gate
equipments as per the drawings,specifications and
instruction of engineer incharge for C.R. Gate
(Size:1.10 Meter X 1.50 Meter- 1 Nos.) at Chainage
12772 Meter of NavsariBranch Canal
Rupees Two Crore Seventy Seven Lacs Eighty Two Thousand Seven Hundred Ninety Seven and Seven Paise only.
I/We am/are Willing to carry out the work at……………………………...………% above/below Percent(should be written in
figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.
* Estimated amount Put to tender Rs. 27782797.07 * Estimated amount Put to tender Rs.
Deduct…….%below Rs. Add…….% above Rs.
Net Rs. Total Rs.
In words…………………….. In words……………………..
*(Please strike out whichever is not applicable)
Note 1 All works shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.
Note-2 All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.
Note-3 Rates quotes include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions, site, moisture,
Note-4 To be continued on additional sheets, if found necessary.
Divisional Accountant Executive Engineer
Ambica Division Ambica Division
Navsari Navsari
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1 SBD Book.pdf
2 Schedule B.pdf
3.1 Drawings Page 1-6.pdf
3.2 Drawings Page 7-12.pdf
3.3 Drawings Page13-20.pdf
3.4 Drawings Page 21-24.pdf
3.5 Drawings Page 25-31.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .