Refurbishment of Toilet Blocks inside the Fort at Chitradurga Civil Deposit 2022 23

Refurbishment of Toilet Blocks inside the Fort at Chitradurga (Civil Deposit)-2022-23 PLUMBING WORKS:DSR-2021,Sl No.17.3.1,Pg No-356:Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

PLUMBING WORKS:DSR-2021,Voll-2,Sl No.17.7.1, Pg No-357:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require::White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

PLUMBING WORKS:DSR-2021,Vol-2,Sl No-17.1.1,Pg No-356:Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required::White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

PLUMBING WORKS:DSR-2021,Vol-2,Sl No-17.5.1,Pg No-357:Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

PLUMBING WORKS: DSR-2021,Vol-2,Sl No-17.73.2,Pg No-370:Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.:600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

PLUMBING WORKS: MR:-Supply and fixing 15 mm dia CP two in one bib cock shall confirm to IS 781 with wall flange and health faucet 56.88 PSI checked of approved make with necessary CP flexible hose 750 mm long nozzle, etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

PLUMBING WORKS: SOR-2022,Vol-2,Sl No-13.17.4,Pg No-118:Providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No:15 mm nominal bore, 90 mm long, weighing not less than 93 g

PLUMBING WORKS: MR:Supply and fixing of 15mm dia C.P brass angle stop cock shall conform to IS 781 with wall flange and 15mm dia PVC connecting pipe for wash basin and cisterns etc.,

PLUMBING WORKS: MR:Supply & fixing heavy cast brass C.P robe hooks fixed with rawl plugs with C.P brass screws. All complete as required.

PLUMBING WORKS: SOR-2021-22,Vol-2,Sl No-14.10.1.1,Pg No-126:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 250 mm

PLUMBING WORKS: MR:Providing and fixing of 32mm CP bottle trap to connect with wash basin waste coupling and the 40mm pvc pipe. Cost to include all the necessary accessories.

PLUMBING WORKS:(A)-DSR-2021,Vol-2,Sl No-18.7.2,Pg No-400:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.20 mm nominal dia Pipes

PLUMBING WORKS:(B)-DSR-2021,Vol-2,Sl No-18.7.2,Pg No-400:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.:25mm dia (NB)

PLUMBING WORKS:(A)- DSR-2021,Vol-2,Sl No-18.7.2,Pg No-401:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.:External work:20mm dia (NB)

PLUMBING WORKS:(B)-DSR-2021,Vol-2,Sl No-18.7.2,Pg No-401:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: 25mm dia (NB)

PLUMBING WORKS:(C)- DSR-2021,Vol-2,Sl No-18.7.2,Pg No-401:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: :32mm dia (NB)

PLUMBING WORKS:(A)-DSR-2021,Vol-2,Sl No-18.17.1A,Pg No-4012Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore

PLUMBING WORKS:(B)- DSR-2021,Vol-2,Sl No-18.17.1,Pg No-4012Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :b. 25mm dia.

PLUMBING WORKS:(C)- DSR-2021,Vol-2,Sl No-18.17.2,Pg No-4012Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :c. 32mm dia.

PLUMBING WORKS:(D)- DSR-2021,Vol-2,Sl No-18.17.3,Pg No-4012Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) ::d. 40mm dia.

PLUMBING WORKS:DSR-2021-Vol-2,Sl No-2.9.1,Pg No-98:Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

PLUMBING WORKS:(A)- MR:Supply, fixing, testing and commsisioning of PVC ( 10kg/sq.cm ) IS 13592 soil waste vent pipe including all fittings shall be 13591 , Eg: Bends, tees, elbows collars, juction, inspection doors, cowls, offset acess pipes, jointing with PVC solution, in making bores punctures in slab and wall and making good of the same, including running of pipes ceiling suspended with brackets and fasteners, cost shall include providing steel brackets and fasterners. :40mm dia

PLUMBING WORKS:(B)- MR:Supply, fixing, testing and commsisioning of PVC ( 10kg/sq.cm ) IS 13592 soil waste vent pipe including all fittings shall be 13591 , Eg: Bends, tees, elbows collars, juction, inspection doors, cowls, offset acess pipes, jointing with PVC solution, in making bores punctures in slab and wall and making good of the same, including running of pipes ceiling suspended with brackets and fasteners, cost shall include providing steel brackets and fasterners. ::50mm dia

PLUMBING WORKS:(C)- MR:Supply, fixing, testing and commsisioning of PVC ( 10kg/sq.cm ) IS 13592 soil waste vent pipe including all fittings shall be 13591 , Eg: Bends, tees, elbows collars, juction, inspection doors, cowls, offset acess pipes, jointing with PVC solution, in making bores punctures in slab and wall and making good of the same, including running of pipes ceiling suspended with brackets and fasteners, cost shall include providing steel brackets and fasterners. ::90mm dia

PLUMBING WORKS:(D)- MR:Supply, fixing, testing and commsisioning of PVC ( 10kg/sq.cm ) IS 13592 soil waste vent pipe including all fittings shall be 13591 , Eg: Bends, tees, elbows collars, juction, inspection doors, cowls, offset acess pipes, jointing with PVC solution, in making bores punctures in slab and wall and making good of the same, including running of pipes ceiling suspended with brackets and fasteners, cost shall include providing steel brackets and fasterners. :110mm dia

PLUMBING WORKS: MR:Providing and fixing PVC ' P ' or ' S ' of deep trap wherever required or nanhi trap self cleansing design with or without vent. Complete including cutting and making good the walls and floors. (100mm dia inlet and 75mm outlet )

PLUMBING WORKS:MR:Supply and fixing C.P hinged grating of 2mm thick with rim including setting in floor with cement mortar

PLUMBING WORKS: MR:Supply and fixing square mouth SW gully trap 100mm dia grade ' A' complete with burnt brick masonry with CM (1:4) and plastering with water tight heavy duty double seal C.I cover, frame of following sizes. The Wt, of cover to be not. less than 4.52 kg of frame to be not less than 2.75 Kg.:450 X 450mm size ' P' trap

PLUMBING WORKS: (A)- DSR-2021,Vol-2,Sl No.19.7.1.1,Pg No-439,Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design ::Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) ::With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

PLUMBING WORKS: (B)- KSRB 12-8.1.1 : Extra for item no. KSRB 12-8.1 depth beyond 450mm and brick masonry chamber with table moulded non modular bricks of class designation 50 in cement mortar 1:5 for every 150mm depth or part thereof including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS

PLUMBING WORKS: (A)-MR:Providing and Laying PVC (6kg/sq.cm) for under ground drainage pipe, jointing with PVC solution, encasing the pipe with 150mm thick 1 : 4 : 8 PCC. Pipe shall be layed on consolidated surface with pre determined slope. :110mm dia

PLUMBING WORKS: (B)- MR:Providing and Laying PVC (6kg/sq.cm) for under ground drainage pipe, jointing with PVC solution, encasing the pipe with 150mm thick 1 : 4 : 8 PCC. Pipe shall be layed on consolidated surface with pre determined slope. :160mm dia

PLUMBING WORKS: DSR-2021,Vol-2,Sl NO-2.9.1,Pg No-98:Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.:

PLUMBING WORKS: (1)- KSRB:12.116,SOR-2018-19::Supply, fixing, testing and commsisioning PVC soil waste vent pipe of Class 3 (6 Kgf/cm2) conforming to IS 4985-2000 including all fittings (IS 7834 for moulded fittings and IS 10124 for fabricated fittings), Eg: Bends, tees, elbows collars, juction, inspection doors, cowls, offset acess pipes, jointing with PVC solvent, running of pipes suspended from the ceiling with brackets and fasteners, chasing / chipping walls using groove cutting machine, making bores / core cutting in slab / beam / wall and making good of the same, cost shall include providing steel brackets, MS angle supports, Pipe supports (all MS angle supports / frames to be painted with two coats of primer) and fasterners. The cost shall include transportation, lead and lift all complete as required:110mm dia

PLUMBING WORKS: (2)-MR:Making rain water Spouts/ grating with PVC bends, elbows, tees etc., 150 X 150mm C.I grating.

PLUMBING WORKS: DSR-2021,Vol-2,Sl No-18.48A,Pg No.409,:Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.(1000ltr x Rs.9.70=Rs.9700.00)

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:PVC CONDUIT & ITS ACCESSORIES:Concealed Conduit System: 1.2.1

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:PVC CONDUIT & ITS ACCESSORIES:Concealed Conduit System: 1.2.2

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:PVC CONDUIT & ITS ACCESSORIES:Concealed Conduit System: 1.3.1

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:PVC CONDUIT & ITS ACCESSORIES:Concealed Conduit System: 1.3.2

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:PVC CONDUIT & ITS ACCESSORIES:Concealed Conduit System: 1.4.1

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:PVC CONDUIT & ITS ACCESSORIES:Concealed Conduit System: 1.4.2

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:WIRES & CABLES:2.1.1

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:WIRES & CABLES: 2.1.2

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:WIRES & CABLES:2.1.3

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:SWITCHES, SOCKETS & ACCESSORIES:3.6.1

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:SWITCHES, SOCKETS & ACCESSORIES:3.8

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:SWITCHES, SOCKETS & ACCESSORIES:3.14.3

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:SWITCHES, SOCKETS & ACCESSORIES:3.14.6

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:CONTROL SWITCH GEARS & ACCESSORIES:5.17.1

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:CONTROL SWITCH GEARS & ACCESSORIES:5.18.2

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:CONTROL SWITCH GEARS & ACCESSORIES:5.18.3

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:CONTROL SWITCH GEARS & ACCESSORIES:5.20.1

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:LT. U.G. CABLES: 1.1.1

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:LT. U.G. CABLES: 1.1.2

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:LT. U.G. CABLES: 1.1.4

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:LUMINAIRS / LIGHT FIXTURES &ACCESSORIES:11.2.2

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:LUMINAIRS / LIGHT FIXTURES &ACCESSORIES:11.5.2

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:LUMINAIRS / LIGHT FIXTURES &ACCESSORIES:11.5.3

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:FIXING CHARGES:13.13

TOILET BLOCK:SERVICES WORKS:ELECTRICAL WORK:FIXING CHARGES:13.19

PLUMBING WORKS:KSRB - 12-5 : Construction brick masonry circular type manhole 0.91m internal diameter at bottom and 0.56m diameter at top with table moulded non modular bricks of 50 class designation 50 in cement mortar 1:4, inside cement plastered 12mm thick with cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete M10 using 40mm and downsize granite metal and making necessary channel in cement concrete M50 with 20mm and downsize granite metal finished with a floating coat of neat cement, SFRC cover and frame ( heavy duty , HD-20 grade designation ) 560mm internal diameter confirming IS:12592, total weight cover and frame not less than 182kg fixed in cement concrete 1:2:4 , 20mm and downsize broken granite metal, providing and removing centering , shuttering including cost of materials, labour charges , HOM complete as per specifications:deep of 0.91m

PLUMBING WORKS:(D)-KSRB - 12-5.2 - deep of 1.67m

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:SITE Clerance. Clearing grass and other overgrowth of vegetation and small trees of girth up to 30cm including rooting out and removal of rubbish up to a distance of 150 m out side the periphery of the area cleared.(Rates form STANDARD SCHEDULE OF RATES IN RESPECT OF BANGALORE CIRCLE UNDER SOUTHERN REGION 2022-23 ASI APPROVED by RD South RAAC WORKS CODE 0002, Page No 12)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:DISMANTLING WORKS :Dismantling all Electrical Switch plates,DP, MCCB's etc, and all serviceable materials by seggregating, recording, and stacking as per the directions of specification.

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:DISMANTLING WORKS :Demolishing R.C.C.(above Toilet block) work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.CPWD-2021-22, Vol-2,Sl No-15.3, Pg No-310

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:DISMANTLING WORKS :Removing of existing old or broken wash basin / urinals and disposing it with all cost and conveyance labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work.(SOR 2018-19, P.No. 134, SI.No. 16.41, KPWD).

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:DISMANTLING WORKS :Removing of existing old or broken Water closet Indian / Eurpoean and disposing it with all cost and conveyance labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work.(SOR 2018-19, P.No. 134, SI.No. 16.42, KPWD).

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:DISMANTLING WORKS :Dismantling tile(Inside Toilet block) work of thickness above 25 mm and up to 40 mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead (CPWD - DSR V2 2021, Page no 312, Sl no. 15.23.2)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:DISMANTLING WORKS :Demolishing cement concrete (inside Toilet block) manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (CPWD - DSR V2-2021, Page no 310, Slno. 15.2.1) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:DISMANTLING WORKS :Dismantling old plaster(Internal & External walls) or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (CPWD - DSR V2 2021, Pg no.315, Sl. no 15.56)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:DISMANTLING WORKS :Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead (CPWD - DSR V2 2021, Pg no.311, Sl. no 15.12.1)

TOILET BLOCK NEAR ENTRANCE:DISMANTLING WORKS :(Removing Existing Paver blocks) : Dismantling brick/Tile work F. Dismantling Boulders laid in wire crates including opening of crates and stacking dismantled materials. SOR-2021-22 Vol-2,Sl No-19.7.1, Pg no-163SR)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:DISMANTLING WORKS :Demolishing brick work(Steps of Ladies & Gents toilet block) manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (CPWD - DSR V2 2021, Page no 310, Slno. 15.7.4 ) Cement mortar

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:PREPARATORY WORKS :Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm diaM.S. tube 1.5 m centre to centre, horizontal & vertical tubes joiningwith cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineer -incharge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. (CPWD -DSR V2 2021, Pg no. 488, Sl. No 24.2)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:PREPARATORY WORKS :( Propping Works ) Erection of Props supports and bracing to a approximately upto a height of 3.00 m to 5.0 m from Floor level where ever necessary using MS centering Jacks, cup and lock MS frame Proping system, Wooden planks and bracings at different levels to support the Structural Members like MS Truss, girder, Country tiles roofing etc, the Prop should be supported until from commencement and finishing of Intervention of restoration works of building portion without Causing any damage to any other part of the building as per Specification. SOR-2021-22,Vol-2,Sl No-7.32.1,Pg No-25

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:WATER PROOFING WORK : Providing and laying in position specified grade of reinforced cement concrete(above Toilet block), excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources),DSR-2021,Vol-1,Sl No-15.1.2,Pg No-225

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:EARTH WORK:KSRB 2-2.2 : Earthwork excavation for foundation(Toilet block front side area) of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. including breaking of clods complete as per specifications. No. KBS 2.1(a) / 2.3.5 SOR-2021-22,Vol-1,Sl No-1.16.2,Pg No-9,

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:EARTH WORK:KSRB 2.3 : Filling available excavated earth ( excluding rock ) in sides of foundations (Toilet block front side area)upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications. Specification. SOR-2021-22,Vol-1,Sl No-1.9,Pag No-7

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FOUNDATION WORK:Providing and laying in position plain cement concrete of mix 1:4:8 with OPC-43 grade cement(Gents & Ladies Toilet inside area), with 40mm and down size graded granite metal coarse aggregates and fine aggregates machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, flooring including cost of all materials, labour, HOM of machinery, curing complete as per specifications (CPWD - DSR V1 - 2021, Page no 164-165, Sl no 4.1.8) (DATA RATE)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FOUNDATION WORK:Providing and constructing granite / trap / basalt rubble stone masonry(for Retaining wall toilet block front side) in foundation with cement mortar 1:6 (uncoursed), bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications.

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FOUNDATION WORK:Reinforced cement concrete work (for R.C.C. & Chejjas of main doors of toilet block area)in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (CPWD - DSR V1 - 2021, Page No 230-31, Sl No 5.3)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FOUNDATION WORK:Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. (CPWD DSR-V1-2021, Pg No 287, Sl No 5.22.1)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:MASONRY WORK :Centering and shuttering (for R.C.C & Chejjas of toilet block) including strutting, propping etc. and removal of form for 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers (CPWD - DSR V1 - 2021, Page No 245-46, Sl No 5.9.5)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:MASONRY WORK :Brick work( for Gents & Ladies Toilet Washbasin,Steps & Ramp) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) (CPWD - DSR-2021, Pg.No. 344, Sl.no. 6.4.1)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:DOORS :Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows/doors comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) , DSR-2021-Vol-1,Sl No-9.147.C.1,Pg No.693-694

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE: WINDOWS:Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows/doors comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) (CPWD - DSR V1 - 2021, Page no. 208, 9.147.C1, 9.147A.1)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:GRANITE COUNTER TOP:Providing and laying plat form using prepolished, water cut / gang saw 40mm thick telephonic Black Granite. laid on existing vertical -supports and fixing in CM 1:3 proportion. Including cutting to required shape, pattern with paper joints, including full rounding for nosing, finished with cement mortar, pointed with colour pigments to match the colour of slab making through jointing with sealant, making holes 25mm x 12mm grooves in joints including curing. (SOR - 2018-19, Page No. 111, Sl.no. 14.52 of KPWDSR)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:GRANITE COUNTER TOP:Providing full nosing for 40mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification (SOR - 2018-19, Page no 111, Sl no 14.53 KPWD):

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FLOORING & PAVING WORKS: Providing and fixing Ist quality ceramic glazed wall tiles (for inside toilet block area)conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (CPWD - DSR V1 - 2021, Page No 482, Sl No - 8.31)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FLOORING & PAVING WORKS: Providing and laying Ceramic glazed floor tiles(for inside Toilet block area) of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete (CPWD - DSR V1 - 2021, Page No 844, Sl No - 11.38)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FLOORING & PAVING WORKS: Excavation of earth in Hard soil for kerb stones by manual means with out causing any damages to Other components of the Fort wall Structure and stacking excavated earth around the work spot for refilling as per the directions of Conservation Assistant.

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FLOORING & PAVING WORKS:Filling available excavated earth (excluding rock) in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5m. including cost of all labour complete as per the directions of Conservation Assistant. (DATA RATE)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FLOORING & PAVING WORKS:Providing and laying in position Lime - concrete of mix 1:3 with slaked lime mortar using 40mm and down size graded Granite / Basalt metal, concrete laying in layers not exceeding 15 cms thick, well compacted, in foundation of cross drainage work including cost all materials, labour, HOM of machinery, curing complete as per specifications.

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FLOORING & PAVING WORKS:Providing and laying size stone flooring pathway, by using the good quality size stone slabs of dimensions 25cms to 30cms in length x 25cms in width x 10cms in thickness, setting on rammed and compacted earth surface (Path B,C and D) for newly proposed path way with properly cutting edges and rough tooled dressing such that suface of dressed stone should not be more than 3mm undulated with pointing joints in lime surkhi mortar 1:1:1 to proper slope for easy discharge of rain water, with all lead and lift of stone including cost of all labours and materials as per the direction of Conservation assistant. (DATA RATE)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FLOORING & PAVING WORKS:Labour charges for re-laying paving stone over existing compacted earth surface alround the building with 1:1:1 lime surkhi flush pointing, including cost of lead,lift, Labour and materials etc complete (DATA RATE)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:FLOORING & PAVING WORKS:Providing and laying in position Lime - concrete of mix 1:1.5 for kerb with slaked lime mortar using 20mm and down size graded Granite / Basalt metal, concrete laying in layers not exceeding 15 cms thick, well compacted, in foundation of cross drainage work including cost all materials, labour, HOM of machinery, curing complete as per specifications.(DATA RATE)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:PLASTERING AND PAINTING WORKS : Providing rough cement plastering (for internal and external wall)15mm thick in single coat with cement mortar 1:4, to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (CPWD-DSR V2 - 2021, Page No 278, Sl No 13.2.1)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:PLASTERING AND PAINTING WORKS :Stone tile work( for External wall of toilet block) for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. (CPWD - DSR V1 2021, Page No 436, Sl No 7.38) 7.38.1 8mm thick (mirror polished and machine cut edge) 7.38.1.1 Granite stone of any colour and shade

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:PLASTERING AND PAINTING WORKS :Providing white washing in two or more coats with filtered Shell lime of 6.0 Kgs, synthetic adhesive of 1.0 kg and Saras of 0.5 Kg of approved quality to give an even shade after thoroughly mixing with water to a required consistency and brushing the surface to remove all dirt and remains of loose powedered application of materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete as per specification. (DATA RATES)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:OTHERS :RAILINGS : Providing and fixing Stainless steel staircase raling (for Steps & Ramps of Toilet block) as per Chief Architect Drawing No. 11520/ HRSC with hand rail 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals, and 5 Nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., complete including cost of materials, labour, HOM of machineries and electrical charges, etc., complete as per specifications. (page no.45, Slno. 7.38 of PWD 2018-19)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:OTHERS :Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required. (CPWD - DSR V1 2021, Page No 123, Sl No 8.7.2)

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:OTHERS :Providing and fixing expansion hold fasteners on C.C/R.C.C/Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete (CPWD - DSR V1 2021, Page No 437, Sl No 8.8) 8.8.1 Wedge expansion type, 8.8.1.1 Fastener with threaded dia 6 mm

TOILET BLOCK NEAR EKANATHESHWARI TEMPLE:OTHERS :Provision for providing and fixing of stone benches (infront of Gents -1,Ladies-1 toilet block)in various places to facilitate the visitors/tourist for rest etc., complete

TOILET BLOCK NEAR ENTRANCE:SITE Clerance. Clearing grass and other overgrowth of vegetation and small trees of girth up to 30cm including rooting out and removal of rubbish up to a distance of 150 m out side the periphery of the area cleared.(Rates form STANDARD SCHEDULE OF RATES IN RESPECT OF BANGALORE CIRCLE UNDER SOUTHERN REGION 2022-23 ASI APPROVED by RD South RAAC WORKS CODE 0002, Page No 12)

TOILET BLOCK NEAR ENTRANCE:DISMANTLING WORKS :Dismantling all Electrical Switch plates,DP, MCCB's etc, and all serviceable materials by seggregating, recording, and stacking as per the directions of specification.

TOILET BLOCK NEAR ENTRANCE:DISMANTLING WORKS :Demolishing R.C.C.(above Toilet block) work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.CPWD-2021-22, Vol-2,Sl No-15.3, Pg No-310

TOILET BLOCK NEAR ENTRANCE:DISMANTLING WORKS :Removing of existing old or broken wash basin / urinals and disposing it with all cost and conveyance labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work.(SOR 2018-19, P.No. 134, SI.No. 16.41, KPWD).

TOILET BLOCK NEAR ENTRANCE:DISMANTLING WORKS :Removing of existing old or broken Water closet Indian / Eurpoean and disposing it with all cost and conveyance labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work.(SOR 2018-19, P.No. 134, SI.No. 16.42, KPWD).

TOILET BLOCK NEAR ENTRANCE:DISMANTLING WORKS :Dismantling tile(Inside Toilet block) work of thickness above 25 mm and up to 40 mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead (CPWD - DSR V2 2021, Page no 312, Sl no. 15.23.2)

TOILET BLOCK NEAR ENTRANCE:DISMANTLING WORKS :Demolishing cement concrete (inside Toilet block) manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (CPWD - DSR V2-2021, Page no 310, Slno. 15.2.1) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

TOILET BLOCK NEAR ENTRANCE:DISMANTLING WORKS :Dismantling old plaster(Internal & External walls) or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (CPWD - DSR V2 2021, Pg no.315, Sl. no 15.56)

TOILET BLOCK NEAR ENTRANCE:DISMANTLING WORKS :Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead (CPWD - DSR V2 2021, Pg no.311, Sl. no 15.12.1)

TOILET BLOCK NEAR ENTRANCE:DISMANTLING WORKS :Demolishing brick work(Steps of Ladies & Gents toilet block) manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (CPWD - DSR V2 2021, Page no 310, Slno. 15.7.4 ) Cement mortar

TOILET BLOCK NEAR ENTRANCE:PREPARATORY WORKS :Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm diaM.S. tube 1.5 m centre to centre, horizontal & vertical tubes joiningwith cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineer -incharge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. (CPWD -DSR V2 2021, Pg no. 488, Sl. No 24.2)

TOILET BLOCK NEAR ENTRANCE:PREPARATORY WORKS :( Propping Works ) Erection of Props supports and bracing to a approximately upto a height of 3.00 m to 5.0 m from Floor level where ever necessary using MS centering Jacks, cup and lock MS frame Proping system, Wooden planks and bracings at different levels to support the Structural Members like MS Truss, girder, Country tiles roofing etc, the Prop should be supported until from commencement and finishing of Intervention of restoration works of building portion without Causing any damage to any other part of the building as per Specification. SOR-2021-22,Vol-2,Sl No-7.32.1,Pg No-25

TOILET BLOCK NEAR ENTRANCE:WATER PROOFING WORK : Providing and laying in position specified grade of reinforced cement concrete(above Toilet block), excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources),DSR-2021,Vol-1,Sl No-15.1.2,Pg No-225

TOILET BLOCK NEAR ENTRANCE:EARTH WORK:KSRB 2-2.2 : Earthwork excavation for foundation(Toilet block front side area) of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. including breaking of clods complete as per specifications. No. KBS 2.1(a) / 2.3.5 SOR-2021-22,Vol-1,Sl No-1.16.2,Pg No-9,

TOILET BLOCK NEAR ENTRANCE:FOUNDATION WORK:Providing and laying in position plain cement concrete of mix 1:4:8 with OPC-43 grade cement(Gents & Ladies Toilet inside area), with 40mm and down size graded granite metal coarse aggregates and fine aggregates machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, flooring including cost of all materials, labour, HOM of machinery, curing complete as per specifications (CPWD - DSR V1 - 2021, Page no 164-165, Sl no 4.1.8) (DATA RATE)

TOILET BLOCK NEAR ENTRANCE:FOUNDATION WORK:Providing and constructing granite / trap / basalt rubble stone masonry(for Retaining wall toilet block front side) in foundation with cement mortar 1:6 (uncoursed), bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications.

TOILET BLOCK NEAR ENTRANCE:FOUNDATION WORK:Reinforced cement concrete work (for R.C.C. & Chejjas of main doors of toilet block area)in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (CPWD - DSR V1 - 2021, Page No 230-31, Sl No 5.3)

TOILET BLOCK NEAR ENTRANCE:FOUNDATION WORK:Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. (CPWD DSR-V1-2021, Pg No 287, Sl No 5.22.1)

TOILET BLOCK NEAR ENTRANCE:MASONRY WORK :Centering and shuttering (for R.C.C & Chejjas of toilet block) including strutting, propping etc. and removal of form for 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers (CPWD - DSR V1 - 2021, Page No 245-46, Sl No 5.9.5)

TOILET BLOCK NEAR ENTRANCE:MASONRY WORK :Brick work( for Gents & Ladies Toilet Washbasin,Steps & Ramp) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) (CPWD - DSR-2021, Pg.No. 344, Sl.no. 6.4.1)

TOILET BLOCK NEAR ENTRANCE:DOORS :Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows/doors comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) , DSR-2021-Vol-1,Sl No-9.147.C.1,Pg No.693-694

TOILET BLOCK NEAR ENTRANCE: WINDOWS:Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows/doors comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) (CPWD - DSR V1 - 2021, Page no. 208, 9.147.C1, 9.147A.1)

TOILET BLOCK NENTRANCE:GRANITE COUNTER TOP:Providing and laying plat form using prepolished, water cut / gang saw 40mm thick telephonic Black Granite. laid on existing vertical -supports and fixing in CM 1:3 proportion. Including cutting to required shape, pattern with paper joints, including full rounding for nosing, finished with cement mortar, pointed with colour pigments to match the colour of slab making through jointing with sealant, making holes 25mm x 12mm grooves in joints including curing. (SOR - 2018-19, Page No. 111, Sl.no. 14.52 of KPWDSR)

TOILET BLOCK NEAR ENTRANCE:GRANITE COUNTER TOP:Providing full nosing for 40mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification (SOR - 2018-19, Page no 111, Sl no 14.53 KPWD):

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS: Providing and fixing Ist quality ceramic glazed wall tiles (for inside toilet block area)conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (CPWD - DSR V1 - 2021, Page No 482, Sl No - 8.31)

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS: Providing and laying Ceramic glazed floor tiles(for inside Toilet block area) of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete (CPWD - DSR V1 - 2021, Page No 844, Sl No - 11.38)

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS: Excavation of earth in Hard soil for kerb stones by manual means with out causing any damages to Other components of the Fort wall Structure and stacking excavated earth around the work spot for refilling as per the directions of Conservation Assistant.

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS:Filling available excavated earth (excluding rock) in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5m. including cost of all labour complete as per the directions of Conservation Assistant. (DATA RATE)

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS:Providing and laying in position Lime - concrete of mix 1:3 with slaked lime mortar using 40mm and down size graded Granite / Basalt metal, concrete laying in layers not exceeding 15 cms thick, well compacted, in foundation of cross drainage work including cost all materials, labour, HOM of machinery, curing complete as per specifications.

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS:Providing and laying size stone flooring pathway, by using the good quality size stone slabs of dimensions 25cms to 30cms in length x 25cms in width x 10cms in thickness, setting on rammed and compacted earth surface (Path B,C and D) for newly proposed path way with properly cutting edges and rough tooled dressing such that suface of dressed stone should not be more than 3mm undulated with pointing joints in lime surkhi mortar 1:1:1 to proper slope for easy discharge of rain water, with all lead and lift of stone including cost of all labours and materials as per the direction of Conservation assistant. (DATA RATE)

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS:Labour charges for re-laying paving stone over existing compacted earth surface alround the building with 1:1:1 lime surkhi flush pointing, including cost of lead,lift, Labour and materials etc complete (DATA RATE)

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS:Providing and laying in position Lime - concrete of mix 1:1.5 for kerb with slaked lime mortar using 20mm and down size graded Granite / Basalt metal, concrete laying in layers not exceeding 15 cms thick, well compacted, in foundation of cross drainage work including cost all materials, labour, HOM of machinery, curing complete as per specifications.(DATA RATE)

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS:Scientific earth work for levelling up to a average depth of 60 cms (or as per site conditions such that rain water drain away from lower bastion wall) on existing ground to expose original ground level of Bastion wall carefully without causing any damage to the existing structure of Fort wall and its components on either side of Work spot for easier storage materials and movement of Labour including stacking excavated earth around the work spot for refilling etc complete as per direction of Conservation Assistant.(DATA RATE)

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS:Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints, including disposal of rubbish to the dumping ground within 50 metre lead (CPWD - DSR V2 - 2021, Page No 488, Sl No 24.1)

TOILET BLOCK NEAR ENTRANCE:FLOORING & PAVING WORKS:Cleaning the stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc.,including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge,of approved brand and manufacturer, with the help of requiredscrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching / damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine,complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineering -charge (The rate is inclusive of all materials & labours involved except scaffolding). (CPWD - DSR V2 - 2021, Page No 488, Sl No 24.3)

TOILET BLOCK NEAR ENTRANCE:PLASTERING AND PAINTING WORKS :Providing rough cement plastering (for internal and external wall)15mm thick in single coat with cement mortar 1:4, to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (CPWD-DSR V2 - 2021, Page No 278, Sl No 13.2.1)

TOILET BLOCK NEAR ENTRANCE:PLASTERING AND PAINTING WORKS :Stone tile work( for External wall of toilet block) for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. (CPWD - DSR V1 2021, Page No 436, Sl No 7.38) 7.38.1 8mm thick (mirror polished and machine cut edge) 7.38.1.1 Granite stone of any colour and shade

TOILET BLOCK NEAR ENTRANCE:PLASTERING AND PAINTING WORKS :Providing white washing in two or more coats with filtered Shell lime of 6.0 Kgs, synthetic adhesive of 1.0 kg and Saras of 0.5 Kg of approved quality to give an even shade after thoroughly mixing with water to a required consistency and brushing the surface to remove all dirt and remains of loose powedered application of materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete as per specification. (DATA RATES)

TOILET BLOCK NEAR ENTRANCE:OTHERS :Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required. (CPWD - DSR V1 2021, Page No 123, Sl No 8.7.2)

TOILET BLOCK NEAR ENTRANCE:OTHERS :Providing and fixing expansion hold fasteners on C.C/R.C.C/Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete (CPWD - DSR V1 2021, Page No 437, Sl No 8.8) 8.8.1 Wedge expansion type, 8.8.1.1 Fastener with threaded dia 6 mm

TOILET BLOCK NEAR ENTRANCE:OTHERS :Provision for providing and fixing of stone benches (infront of Gents -1,Ladies-1 toilet block)in various places to facilitate the visitors/tourist for rest etc., complete

G MURALI