SUPPLY, INSTALLATION AND COMMISSIONING OF SPECIAL TOOLS FOR MAIN ENGINE REPAIRS FOR THE PROJECT ENGINEERING CENTRES AUGMENTATION FOR SUPPORT FACILITY OF P-17A CLASS OF SHIPS AT ND(V)

Supply, Installation, Test and Commissioning of Special Tools for Main Engine Repairs of following items as indicated in Para 3 of Part II of RFP:-

Hydraulic Tools as specified in Para 3.1 of Part II of RFP.

Tools for general use as specified in Para 3.2 of Part II of RFP.

Tools for crankshaft bearing as specified in Para 3.3 of Part II of RFP.

Tools for connecting rod as specified in Para 3.4 of Part II of RFP.

Tools for piston as specified in Para 3.5 of Part II of RFP.

Tools for water jacket as specified in Para 3.6 of Part II of RFP.

Tools for cylinder head as specified in Para 3.7 of Part II of RFP.

Tools for fuel injection valve as specified in Para 3.8 of Part II of RFP.

Tools for exhaust gas pipe as specified in Para 3.9 of Part II of RFP.

Tools for inlet and outlet valves as specified in Para 3.10 of Part II of RFP.

Set of standard tools as specified in Para 3.11 of Part II of RFP.

Crank wed deflection measuring device as specified in Para 3.12 of Part II of RFP.

Dismantling device for valve bridge guide as specified in Para 3.13 of Part II of RFP.

Tools for push rod and tappet as specified in Para 3.14 of Part II of RFP.

Tools for inlet and outlet valve as specified in Para 3.15 of Part II of RFP.

Turning gear as specified in Para 3.16 of Part II of RFP.

Valve cone grinder (electrical driven) as specified in Para 3.17 of Part II of RFP.

Valve seat grinder/ refacing device as specified in Para 3.18 of Part II of RFP.

Electronic firing pressure gauge as specified in Para 3.19 of Part II of RFP.

Mobile testing device for installed pressure transmitter as specified in Para 3.20 of Part II of RFP.

Fiberscope with camera and monitor as specified in Para 3.21 of Part II of RFP.

Measuring device for cylinder liners as specified in Para 3.22 of Part II of RFP.

Pressing device for cylinder heads as specified in Para 3.23 of Part II of RFP.

Tools for camshaft as specified in Para 3.24 of Part II of RFP.

Tools for injection valve as specified in Para 3.25 of Part II of RFP.

Tools for charge-air-cooler as specified in Para 3.26 of Part II of RFP.

Tools for attached pumps as specified in Para 3.27 of Part II of RFP.

Tool for lube oil cooler as specified in Para 3.28 of Part II of RFP.

Set of tools for turbo charger as specified in Para 3.29 of Part II of RFP.

Test kit for engine cooling water as specified in Para 3.30 of Part II of RFP.

Test kit for engine lubricating oil as specified in Para 3.31 of Part II of RFP.

Strainer cleaning device for the filters as specified in Para 3.32 of Part II of RFP.

Splash protection for the flanged joint as specified in Para 3.33 of Part II of RFP.

Civil Work (Refers to Para 4 of Part II of RFP)

Standard Accessories (Refers to Para 11 of Part II of RFP)

Technical Literature / Certificates / Documentation (Refers to Para 13 of Part II of RFP)

Training (Refers to Para 14 of Part II of RFP)

Any other item such as transportation, insurance, freight, packing etc

Notes: 1. Cost of item listed at Sl 1.01 to 1.33 and 5 (if applicable) are to be quoted in the respective rows of the price bid sheet. 2. Bidder NOT PERMITTED to include cost of items listed at Sl 2 to 6 with Sl 1.01 to 1.33 as lumpsum amount 3. Bidder required to mandatorily quote for Sl 1.01 to 1.33 and 5 failing which bid shall be treated as non bonafied and liable for rejection. 4. Any clarifications contact to SO1(GP-1) (Phone No. 7904759367 and Email ID. [email protected]) 4. Bidders are mandatorily to quote GST/ Taxes as applicable against each serials, falling which bid shall be treated as non bonafied and liable for rejection.