Tender For Supply and installation of 11/22 KV distribution Transformer HT/LT Terminal Protector and Supply of HT/LT Booting, Transformer Earthing, Sleeves (Conductor Cover), Bird Guard in Any Scheme for Transformers (Including Installation) of Rankuwa Sub-Division Under Valsad Rural Division.

-::- SCHEDULE-B -::-

The Rates inclusive of PF and Exclusive of GST

Item Code Item Unit FY 2024-25

Binding of messanger Conductorat with a

distance not more than 0.75 mtr with 6 turns

minimum on XLPE Cable with single strand

binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV

Distribution Transformers HT Terminal

2 9926000086 protector (UV Resistance) with using PER SET

95/120/150 sq.mm long barrel aluminum lug.

(1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22

kV Distribution Transformer with replacement

of bare conductor by HT ABC conductor (DO

3 9926000087 bottom side to transformer) after removal of PER SET

semi conductor by HT ABC (6 inch both side).

HT ABC to be supplied by DGVCL. (1Set =

Nos i.e. on R, Y, B)

Supply, Installation, Testing and

Commissioning of Maintenance Free, Ready

Capsule, Pipe-In-Cage (Pic) Type, Earth

4 9926000088 Electrodes for HT Feeder Pole Having 2000 NO

mm Electrode Length as per the Tender

Specifications and Drawing. (All Materials Will

Be Supplied By Agency)

Supply, Installation, Testing and

Commissioning of Maintenance Free, Ready

Capsule, Pipe-In-Cage (Pic) Type, Earth

5 9926000089 Electrodes for HT Feeder Pole Having 3000 NO

mm Electrode Length as per the Tender

Specifications And Drawing. (All Materials Will

Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip

having hot dip- galvanized-zinc coating of 80-

100 microns without any joints or welding.

Both the end of the GI strip should be

connected with GI nut bolts and required

fabrication work for giving separate earthing

(1) Neutral of the transformer

(2) MS structures of the transformer center

(Approximately 25 meter GI strip per

transformer centre

- as per requirement and instruction of

Engineer in- charge) (All Materials will be

supplied by Agency)

Supply and Installation of uPVC standard

make Pipe of 1.25" diameter for covering GI

strip with UV protected Cable Ties of 550 X

7.6 mm size to bind with pole

face(Approximately 25 meter uPVC pipe for

GI strip covering per transformer centre -as

per requirement and instruction of Engineer

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and Drop

8 9926000093 out fuse to Transformer H.T. including Busbar Per TC

(12 mm sleeve) as per technical specification.

(All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and Drop

9 9926000100 out fuse to Transformer H.T. without Busbar Per TC

(12 mm sleeve) as per technical specification.

(All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and Drop

out fuse to Transformer H.T. including

Busbar(15 mm sleeve) as per technical

specification. (All Materials will be supplied by

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and Drop

out fuse to Transformer H.T. without

Busbar(15 mm sleeve) as per technical

specification. (All Materials will be supplied by

Supply & fixing of Disc type Red Color

FRP(Non-flammable) material with Weather

resistant, Non-conductive bird guard OD=300

MM, ID=33 MM, Width =1.25 MM, one side

cut from ID to OD. (All Materials will be

supplied by Agency)

Providing and fixing of LT Terminal protectors

i.e. Re-useable boot (LT Side 1.1 kV)

13 9926000096 including LT (1.1 kV) insulating taps. All live No

part at LT side shall be covered with fixing of

LT insulating taps.

14 Nylon Net around Transformer Center

14.1 9926000097 Nylon Net (12 * 15 ft) Per Net

14.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All

14.3 9926000099 fabricated material for fitting nylon net shall Per TC

be provided by DGVCL)

1. DGVCL will provide key material like M.S.

materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to

the contractor.2.All fabricated items shall be

fabricated as per DGVCL approved drawing

and by welding rods confirming to the

relevent ISI specification and as directed by

Engineer in charge.3.Necessary electricity

connection for fabrictated items shall be

provided by DGVCL on payment of required

charge for connection & electricity bill of the

same shall be paid by the agency.4.All the

rates are inclusive of PF and Exclusive of GST

applicable time to time.5.All steel material are

to be painted as below:(a) Scrubbing of

rusted surface properly before applying the

paints on to the RSJ poles & steel fabricated

materials of RSJ/PSC poles is must

required.(b) Two coats of approved ISI mark

red oxide (primer) is to be properly painted

for the RSJ poles & steel fabricated materials

of RSJ/PSC poles. (c) Two coats of approved

ISI mark silver paint (i.e. triple mangoes or

equivalent quality silver paint) is to be

properly painted on to the RSJ poles & steel

fabricated materials of RSJ/PSC

Total of schedule B….

(+)_______%Above, (-)_______%Below, Rate to

Net Total of Schedule B:

Amount in Words: (Twenty-Five lacs only)

1. Whatever Steel Material removed after replacement should be credited to Store.

2. The rates are inclusive of PF & Work Contract Tax & excluding of GST.

3. Contractor has to carry out work under Rankuwa Sub-Division under Valsad-Rural

4. DGVCL will provide 1ph & 3ph LT Ariel Bunch Cable 11/22kv HT ABC with necessary

accessories to the contractor.

5. The rates are inclusive of dismantling charges of existing bare conductor and

crediting in to store & dismantling of service lines from LT bare conductor and to

provide service connections on ABC by insulated pierce connectors through service

connection box.

6. The contractor has to collect all the required materials from DGVCL store as well as

credit the dismantle material to the DGVCL store at their cost.

1. DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to the contractor.

2. All fabricated items shall be fabricated as per DGVCL approved drawing and by welding

rods confirming to the relevent ISI specification and as directed by Engineer in charge.

3. Necessary electricity connection for fabrictated items shall be provided by DGVCL on

payment of required charge for connection & electricity bill of the same shall be paid by the

4. All the rates are inclusive of PF and Exclusive of GST applicable time to time.

5. All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles &

steel fabricated materials of RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the

RSJ poles & steel fabricated materials of RSJ/PSC poles.

Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver paint)

is to be properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

Executive Engineer (O&M)

Valsad Rural Division.