STRUCTURAL REHABILITATION & RENOVATION WORK OF BHARTHANA -3 ANGANWADI AT BHARTHANA VILLAGE AND LAL TAMBU ANGANWADI AT KOSAD VILLAGE IN NEW EAST (SARTHANA) ZONE, SURAT.

NAME OF WORK:- STRUCTURAL REHABILITATION & RENOVATION WORK OF BHARTHANA -3 ANGANWADI AT

BHARTHANA VILLAGE AND LAL TAMBU ANGANWADI AT KOSAD VILLAGE IN NEW EAST (SARTHANA) ZONE,

SOR 2024-25 & MR

Description Qty. Unit Amount

(A) ANGANWADI AT BHARTHANA-3

PART A:- REPAIR + REHABILITATION

Providing & Applying 20mm.to 35mm Th.(Max. 35mm thickness consider)

Heavy Roller plaster on walls or similar surfaces at all floor levels consisting of

12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand : racron 3s ( 0.5 nos

per bag )) also plaster master wterproofing chemical

1 ml /bags as per companey manual & approved by E.I.C or consultant & 8 mm.

th. Finishing coat of C.M. 1:1 (1 cement:1 sand) apply thick cement slurry and

apply roller horizontal as well as vartical ( two times ) up to good quality and size

of grain in elevation as per directed by engineer incharge

up to plinth level 13.00 417.00 S.M.

WORK ABOVE PLINTH LEVEL

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision) and as

2 per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement. (With using plastisizer

(A) foundation, footing, base of columns and mass concrete

For Sintex Tank (Upper Terrace) 1.00 4373.05 C.M.

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision) and as

3 per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement. (With using plastisizer

(1)Having c/s area up to 0.08 s.mt

Ground Floor 0.00 12930.68 C.M.

First Floor (Terrace Floor) 0.00 12971.23 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt

Ground Floor 0.00 11253.32 C.M.

First Floor (Terrace Floor) 0.00 11293.87 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0.00 9288.03 C.M.

First Floor (Terrace Floor) 0.00 9328.58 C.M.

(1)Having c/s area up to 0.08 s.mt

Ground Floor 0.00 9083.57 C.M.

First Floor (Terrace Floor) 0.00 9124.12 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt

Ground Floor 0.00 8155.37 C.M.

First Floor (Terrace Floor) 0.00 8195.92 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0.00 7067.84 C.M.

First Floor (Terrace Floor) 0.00 7108.39 C.M.

2) Slabs having more than 8cm. and upto 10 cm. Th'.

Ground Floor 0.00 7965.38 C.M.

First Floor (Terrace Floor) 0.00 8005.93 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.

Ground Floor 0.00 7377.92 C.M.

First Floor (Terrace Floor) 0.00 7418.47 C.M.

SOR 2024-25 & MR

Description Qty. Unit Amount

4) Slabs having more than 13 cm. Thickness

Ground Floor 0.00 6793.97 C.M.

First Floor (Terrace Floor) 0.00 6834.52 C.M.

Ground floor 0.09 7119.46 C.M.

First Floor (Terrace Floor) 0.00 7160.01 C.M.

Ground floor 0.00 9963.33 C.M.

First Floor (Terrace Floor) 1.23 10003.88 C.M.

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work

incl. bending, binding & placing in position etc.comp.---Ground Floor

Ground floor 6.00 77.29 Kg.

First floor (Terrace Floor) 80.00 78.34 Kg.

Providing throatingor plasterdrip and moulding it toR.C.C. chajja etc.

comp.. For all Floor (M.R.)

Providing 20mm deep finished groove in plaster in lineand level etc. Comp. For

all Floor (M.R.)

DISMANTLING WORKS

Demolition of brick work and stone masonry including stacking of serviceable

7 materials and disposal of unserviceable materials with all lead and lift. (i) On 0.30 577.92 C.M.

Removing the scraping of old deteriosted plaster of any thickness form

8 wall/R.C.C. member including strcking of serviceable material and disposal of 37.86 20.55 S.M.

unserviceable material from site of work with all lead and lift.

Demolition including stacking of serviceable materials and disposal of

9 unserviceable materials with all lead and lift.' 0.04 1110.75 C.M.

Demolition of terrace including stacking of serviceable materials and disposal of

10 unserviceable materials with all lead and lift.' 1.) Brick 45.06 66.81 S.M.

Dismantling C.I. Pipes, G.S.W. Pipes and A.C.,PVC rain water pipes with

11 fittings and clamps including stacking the materials with all lead & lift ( For any 30.00 78.51 R.M.

Dia. of pipes )

Dismantling Doors, Windows, Ventilators etc. (wood or steel) shutters including

chowkhats, architreaves, holdfasts, and other attachment etc. complete and

stacking them within all lead and lift.

(1) Not exceeding 3 sq. meters in area .

Dismentaling of Tiles floors laid in mortar including stacking of serviceable

13 material and disposal of unserviceable material with all lead and lift 15.73 50.11 S.M.

REPAIR & REHABILITATION WORKS

Fixing clerestory window chowkhats in existing openings including cutting

masonry for hold fasts, embedding hold fasts in cement concrete blocks with

cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate

14 mm single size), painting two coats of coal tar to sides of chowkhats and making 1.00 399.00 NOS.

good the damge to walls complete including disposal of rubbish to the dumping

SOR 2024-25 & MR

Description Qty. Unit Amount

Providing and applying cement mortar (1:3) modified by using polymer and

expanding grout additives at various thickness for repair/strengthening of various

RCC elements at all floor levels, lead, lift, including breaking, chipping,

dismentling existing cover concrete and exposing existing reinforcement,

15 applying wirebrush for making surfaces of steel and concrete free from rust and

other loose materials, applying rust removing chemical on existing reinforcement,

applying anti-corrosive coating on existing reinforcement, applying polymer

bonding agent on existing concrete surfaces before applying polymer modified

mortar in specified thickness as directed by the Engineer-in-charge.

The rates shall also include providing and applying 12 mm thick cement mortar

(1:4) modified with plasticizer for finishing smooth the repaired surfaces,

providing and applying curing agent on the repaired surfaces, etc. complete as

directed by the Engineer-in-charge. The make and quality of rust removing

chemical, anti-corrossive coating, polymer bonding agent, polymer and

expanding grout additives, plasticizer, curing agent, etc. shall be approved by

engineer-in-charge. The procedure for application shall be strictly in accordance

with manufacturer's detail specification, which shall be submitted before start of

work and shall be approved by the Engineer-in-charge.

The rates shall include the cost of providing, erecting and maintaining leakproof

shuttering /formwork /scaffolding, etc. to be used for the purpose, providing and

erecting props, temporary frame work and maintain them in position for required

time, to existing load bearing elemnts for reliving loads coming on to structural

members being repaired/strengthened but excludes the cost of reinforcement.

The rates shall include the cost of providing, erecting formwork with drainage

outlet for presocking and air venting. The formwork shall be such that it provides

suitable excess points to pour or pump the mixed micro fluid concrete in place.

The cost shall also include providing and erecting props, temporary frame work

and maintain them in position for required time, to existing load bearing elements

for relieving loads coming on to structural members being repaired/strengthened

but excludes the cost of reinforcement.

chemical use BASF, Sunanda, Fosroc, Pidilite etc as per Approved by engineer

(Note:- Only Single Payment Consider For Same Work)

0mm To 25mm thickness 4.07 1208.00 S.M.

0mm To 50mm thickness 4.07 2348.00 S.M.

Providing Formwork of ordinary timber planking so as to give rough finish

including centering, Shuttering, Struting and propping etc. height of propping

16 and centering below supporting floor to ceiling nott excluding 4m and removal

of the same for Cast in situ reinforced concrete and plain concrete work

(G)Column, pillers, post and strusts

(i)Square rectangular polygonal in plan (upto 10 ton) 1.00 320.70 S.M.

Providing and applying cement mortar 1:4 enriched with expanding grout

additive in required proportion in cement for repair of cracks in RCC and non-

RCC members after making 25mm x 25mm groove, cleaning the surface and

applying coat of bonding, finishing smooth the repaired surfaces, providing and

applying curing agent on the repaired surfaces, etc. complete at all floor levels as

directed by engineer-in-charge. The make and quality of expanding grout

additives, bonding agent, curing agent, etc. shall be approved by the engineer-in-

charge. The procedure for application shall be strictly in accordance with

manufacturer's detail specification, which shall be submitted before start of work

and shall be approved by the Engineer-in-charge.

SOR 2024-25 & MR

Description Qty. Unit Amount

Carrying out Injection grouting for cracks in RCC structural members by drilling

holes of 15 mm diameter upto minimum depth of 75 mm, fixing aluminium

nozzle / rubber pipe using non-shrink epoxy putty, injecting epoxy grout material

specified pressure with grouting pump till it the material refuses to impregnate

inside the hole. If required or suggested by the Engineer-in-charge, injection

18 grouting shall be carried out more than once for a hole to assure proper spreading

of grout material and filling of capillaries / voids

within the element. After satisfactory injection grouting, the nozzle/pipe shall be

cut and sealed by non-shrink epoxy putty. The surface shall be finished smooth

with C:M (1:4) and reinstated to the original condition as directed by the

The rate shall include the cost of providing and supplying all tools, materials

,labour, scaffolding, props, formwork,etc.complete.The make and quality of

epoxy grout, epoxy putty, etc. shall be

approved by the Engineer-in-charge.The procedure for application shall be

strictly in accordance with manufacturer's detail

specification, which shall besubmitted beforestart of workand shall beapprovedby

theEngineer-in-charge. (Actual noof holes

and their locations shall be as decided by the Engineer-in-charge)

chemical use BASF, Sunanda, Fosroc, Pidilite etc as per Approved by engineer

Carrying out Injection grouting for cracks in RCC structural members by drilling

holes of 15mm diameter up to minimum depth of 75mm, fixing aluminium

nozzle/ rubberpipeusingcementitious

compound, injecting polymer modified slurry (SBR+cement+water)

1:1:1material at specified pressure with grouting pump till it the

material refuses to impregnate inside the hole. If required or suggestedby

19 theEngineer-in-charge, injection grouting shall be carried out more than once for

a hole to assure proper spreading of

groutmaterial and fillingof capillaries / voids with in theelement. After

satisfactory injection grouting, then ozzle/pipes hall becut and

sealed by non-shrinke poxy putty. The surfaces hall be finished smooth with

C:M(1:4) and reinstated to the original conditionas

directed by the Engineer-in-charge.

The rate shall include the cost of providing and supplying all tools, materials,

labour,scaffolding, props, formwork,etc.complete.The make and quality of epoxy

grout, epoxy putty, etc. shall be approved by the Engineer-in charge. The

procedure for application shall be strictly in accordance with manufacturer's 10.00 450.00 NOS

detail specification, whichshall besubmittedbeforestart of workand shall be

approved by the Engineer-in-charge. (Actual NOS of holes and their locations

shall be as decided by the Engineer-in-charge)

Providing and appliying thixotropic Making up lost section of concrete / mortor

with thixotropic repair mortor of one-component, normal-setting, shrinkage-

compensating, thixotropic mortar for layers up to 20 mm thick. Supply and

application of one-component, normal-setting, shrinkage-compensating

thixotropic mortar made from cementitious binders, selected aggregates, special

additives and synthetic polyacrylonitrile fibres, for reconstructing deteriorated

20 concrete structures. Apply the mortar after adequate preparation of the substrate

by removing all deteriorated concrete to form a sufficiently-rough, solid substrate

with no detached portions. Clean the steel reinforcement down to bare metal and

apply a passivating treatment by brush-applying two coats of one-component,

anti-corrosion cementitious mortar. Apply the product by trowel or spray with a

continuous-feed rendering machine on a clean substrate saturated with water in

layers up to 20 mm thick.

To improve expansion in the open air during the first few days of curing, add a

special curing additive when mixing the mortar to reduce both plastic and

hydraulic shrinkage at a dose of 0.25% in weight on the weight of the mortar.

The product must comply with the minimum requirements of EN 1504-3 for

structural mortars and have the following performance characteristics:

SOR 2024-25 & MR

Description Qty. Unit Amount

Compressive strength (EN 12190) (MPa):> 40 (after 28 days), Flexural strength

(EN 196/1) (MPa): 7 (after 28 days), Compressive modulus of elasticity (EN

13412) (GPa): 25 (after 28 days) Adhesion to substrate (EN 1542) (MPa):>

(after 28 days), Capillary absorption (EN 13057) (kg/m²•h0.5): < 0.20, Thermal

compatibility measured as adhesion according to EN 1542 (MPa): – freeze-thaw

cycles with de-icing salts (EN 13687/1): > 1.5 (after 50 cycles), Storm cycles

(EN 13687/2):> 1.5 (after 30 cycles), dry thermal cycles (EN 13687/4):>

(after 30 cycles), Reaction to fire (EN 13501-1) (Euroclass):1

Consumption (per cm of thickness) (kg/m²): approximately 18.5 Kg included

and calculated in the price for work carried out according to specification: (1)

hydro-cleaning of adhesion surfaces and saturation of substrate with water

immediately before applying the mortar; (2) application of the mortar by trowel

or spray around steel reinforcement; (3) levelling off surfaces with a straight edge

and final tamping; (4) careful curing of the mortar by spraying on water for at

least 7 days (3times) after application.

(Note:- Only Single Payment Consider For Same Work)

0 MM TO 25 MM THICK 4.50 1370.00 S.M.

0 MM TO 50 MM THICK 4.50 2460.00 S.M.

Pointing on brickwork with cement mortar 1:1 (1-cement : 1- coarse sand) (B)

Ruled pointing.

MASONARY & PLASTER WORKS

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level upto floor

two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per

Technical Specification

Ground floor 0.00 4644.08 C.M.

First floor (Terrace Floor) 0.30 4689.24 C.M.

Providing 20mm thick double coat mala cement plaster on brick/concrete work

for plastering comprising of base coat 12mm thick cement plaster in cement

23 mortar (1Cement :4coarsesand) in rough finishing and 8mm thick top coat of

cement mortar1:2 (1Cement :2Coarsesand) finished with trovel including

scaffolding curing etc. complete

Ground Floor 30.47 286.10 S.M.

Providing & Applying 20mm.to 35mm Th.(Max. 35mm thickness consider)

Heavy Roller plaster on walls or similar surfaces at all floor levels consisting of

12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand : racron 3s ( 0.5 nos

per bag )) also plaster master wterproofing chemical

ml /bags as per companey manual & approved by E.I.C or consultant & 8 mm.

th. Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and

apply roller horizontal as well as vartical ( two times ) up to good quality and size

of grain in elevation as per directed by engineer incharge.

Outside All Floor Plaster 21.66 417.00 S.M.

Apply two coats of putty and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other matter and sand

papered smooth.

(A) for wall and similar surfaces 121.89 40.59 S.M.

Painting two coats of enamel paint over priming coat (including priming coat) on

wall after removing entire surface dirt, dust foreign matter & also incl. preparing

the surface even & sand papered smooth etc. comp.(M.R.)

SOR 2024-25 & MR

Description Qty. Unit Amount

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

27 throughly brushing the surface free from mortar droppings and other foreign 95.63 83.36 S.M.

matter and sand papered smooth.

Providing and applying two coats of weather shield max paint (3 coat may be

required in case of darker colours.) of ICI DULEX or Apex ultima of asian paint

including applying exterior acrylic primer coat as per manufacturers specification

and dirctions in shade and colour approved by architects, on exterior surface of

the building including scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and manufacturers. Surface

Preparation :Surface is throughly clean, dry and free from all loose dirt, chalk,

grease, fungi, algae and flaking paint. This can be achieved by brushing with a

28 wire / stiff coir brush followed by water jetting if required. Fill up all minor

cracks and defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint must be

throughly scraped off and Clean the surface throughly using wire brushes.

PRIMING:Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-

5 hours. Application of putty is Not recommended. Minimum 4-6 hours duration

is required between each coat of weather shield max paint.

(A) For wall 121.31 82.00 S.M.

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, Jhonson,Nitco,

Somani, Bell, Asian or Euromake in flooring,treadsof steps & Landing laidonbed

of 20mm (Average) baseof cement mortar 1:6 (1 Cement : 6Coarsesand) on new

29 surface or fixing on existing flooring by adhesive material including dismentaling 0.00 1467.72 S.M.

of existing flooring and jointed with colour cement slurry including finishedwith

flush pointing & cleaning the surface etc. comp.Size 24" x 24" For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers

30 of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) 0.00 1135.80 S.M.

and jointed with white cement slurry.

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey

31 cement slurry mixed with pigment to match the shade of slab including 4.18 1019.39 S.M.

rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1- Cement

32 : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match 2.38 1130.79 S.M.

the shade of slab including rubbing and polishing etc. complete.

Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid

on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with nessary

33 adhesive material and finished with flush pointing in white or colour cement, 0.84 2026.00 S.M.

including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.).)

Providing& laying granite slab 18mm thick inflooring, treadsof steps and landing

laid onbedof 20mm thick cemen mortar 1:6 (1Cement : 6 coarse sand)or lime

34 mortar1:1.5 laid and finished with flush pointing in white or colour cement 1.93 2410.00 S.M.

including rubbing and polishing complete. (BasicRate:

Providing& laying granite slab18mm thick in skirting, risers of steps, dedo and

pillars laid on10mm thick cement mortar 1:4 (1Cement :

Coarse sand) and finishedwith flush pointing inwhite or colour cement including 0.96 2449.00 S.M.

rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

SOR 2024-25 & MR

Description Qty. Unit Amount

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bellmakeat all floor levels, in flooring, treads of steps &

landings laid on a bed of 12mm. Av.Th.C.M.1:3 (1cement :3sand) finished with

flush pointing in white cement etc.com. For all floors

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of steps &

37 dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary cement paste 1.53 932.02 S.M.

for fixing and joined with white cement slurry etc. complete. For all floors

38 Labour charges for edge finishing for granite 30.02 43.43 R.M.

WATERPROOFING WORKS

NOTE :- (1) The whole work is to be executed through specialized agency with a

guarantee of 10 (Ten) years given on a prescribed proforma duly stamped (2)

The rate shall include for work at all floors & conducting water proof test as

directed. (M.R.)

(B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs, balconies,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 Kg./sqm of

cement admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick bats is finally 46.00 511.00 S.M.

covered by jointless cement plaster 20mm th. in C.M. 1:4 added with special

water proofing compound confirming to IS:2645 & top smooth finished with

trowel with false chequered marking of 300 mm.size.The treatment is carried

along the vertical surface of the parapet & other adjoining wall up to height of

about 300 mm in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and laying broken China mosaic flooring for terrace using 12 mm to

20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar crème out upto surface using white

40 cement including rounding off junctions and extending them upto 15 C.M. along 46.00 779.70 S.M.

the wall, clearing with water and oxalic acid etc. as directed.

WATER SUPPLY & SANITARY WORKS

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm

diameter with jali of the following nominal diameter of self cleaning design with

41 C.I. scread down or hinged grating including the cost of cutting and making

good the walls.

All floor 2.00 586.27 NOS

Providing & fixing U-PVC pipes Confirming to ISno. 13592 (Type"A") of

Prince/ Supreme/Jain/Astral/ Tulsi/Finolexmake for rainwater at all floor

levels incl. fixtures likebends, tees, shoeetc joined with resin of approved brand

& manufacture etc. comp. (M.R.)

Providing & Fixing U-PVC pipe (SWR) confirming to IS NOS 13592 (Type "B")

of Prince/Supreme/Jain/Astral/Tulsi/FiNOSlex make for soil and waste discharge

43 system at all floor levels incl. All fixtures like bends, tees, shoe etc. jointed with

resin of approved brand & manufacture etc. comp.

44 Providing & fixing G.I. Rain water spout of 50 mm dia & 30 C.M. length etc.

SOR 2024-25 & MR

Description Qty. Unit Amount

All floors level 1.00 101.91 NOS

Providing and constructing simple chamber with 23C.M.. th. brick masonary

walls in c.m. 1:5 with cement plaster 15mm. thick in c.m. 1:3 inside and outside

to exposed faces,R.C.C. top slab with 1:2:4 mix,foundation concrete 1: 5:10 and

45 fixing C.I. cover with frame to be NOSt less than 38 Kg.. on top etc. comp.

Inside dim. 455 X 610mm X 450 mm deep for single pipe.

(A) Same as above but Precast RCC heavy duty Cover instead of C.I. Cover.

46 Extra for every additional depth of 0.1 mt beyond 0.45 mt. 3.00 242.39 NOS

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor

levels, size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for water closet

47 squatting pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 1.00 3277.39 NOS

fine sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Jaquar ,HindWare

Providing & fixing Wash Hung basin with single hole for pillar tap , Size- 550 x

48 400 mm at all floor levels, with C.I. or M.S. Brackets painted white incl. cutting

holes & making good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Jaquar SLS- WHT -6801,HindWare10004

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels,

polished bright etc. comp.

Make- Cera F2013151 BIB COCK, HindWare F280002 BIB COCK, Jaquar FLR-

5047 N BIB COCK

Providing flush cock consisting lever, cartridge sleeve & flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101

Jaquar FLR 5083 KN , CONCEALED BODY ALD-081,HINDWARE

F730013 & CONCEALED STOP COCK F850095

Providing & fixing C.P. brass pillar cock with copper connection, C.P. brass

screws complete

Make- Cera F2013101, HindWare Cat. No.: F650003, Jaquar FLR- 5011N

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper

connecting pipe 450 mm long and nuts, washer and brass flange complete,

52 including cutting and making good the wall where

Make- Cera F1020362, HindWare Cat. No.: F440020 F850094,

jaquar CON 053 KN

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/FiNOSlex make for water supply line at all floor levels incl. fixtures like

bends, tees, shoe etc joined with resin of approved brand & manufacture etc.

53 comp. Pipe shall be fixed on the wall the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing & Fixing gun metal check or NOSn return full way wheel valve at all

floors levels, etc. complete. (A) 15 mm. dia.

Providing & Fixing abonite ball cock of approved qualities directed etc. comp.

SOR 2024-25 & MR

Description Qty. Unit Amount

Providing & Fixing in position PVC Cowl vent to pipes of

56 Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp. (A) 75 mm. dia. 1.00 40.00 NOS

(B) 110 mm Dia. 1.00 50.00 NOS

Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing

57 with cement plaster 20 mm avg thickness(C.M. 1:3 [1 cement :3 coarse sand])

finishing as per instruction given by Eng. incharge. MR

(A) 75 mm PVC PIPE 3.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 3.00 180.00 R.M.

Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I.

58 or PVC pipes including the cost of cutting holes & making good the wall etc.

Complete - 100 mm dia as per architect instructions

(A) 40 to 50 mm dia 6.00 62.00 NOS

(B) 75 to 90 mm dia 6.00 75.00 NOS

(C) 110 mm dia to upto 150 mm dia 6.00 90.00 NOS

Removal of Sintex tank with all fittings and refixing at same location but on the

pedastal of 0.3m height from slab level with all necessary fittings and fastenings

as per requirements and as per directions of engineer in charge. As per M.R.

(1000 lit to 10,00 Lit. any size od Tank)

Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark

60 water tank of required capacity each with all necessary fittings & 1000.00 3.95 Lits

connection etc. complete on terrace. (sintex tank 10000 lit.)

61 Vegetation Removal from building 1.00 1500.00 JOB

Providing & Fixing M.S.Grills of required pattern to wooden frames of windows

etc. at all floor levels with M.S.flats at required spacing & frame around square or

round bars with round headed bolts & round heade bolts and nuts or by screws

incl. Priming coat of Red lead paint etc. comp.

Apply hacking on RCC member manual or by mechanical as discoused by

engineer incharge. 350 - 400 notches (dents)

per sqmt. Process of making the back ground rough before plastering for better

bonding of mortar with RCC (Tacha)

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face

water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both side

with adhesives as specified by the manufacturers. The laminate shall be as per

64 approved shade & texture, of make incl. Sal wood frames of finished size 12cm x 0.00 3720.00 S.M.

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum fixtures &

fastenings For all Floor

Same as Above But Without Frame 1.60 2520.00 S.M.

Carrying out wall treatment for termite control including spraying with chemical

solution in oil base including labour and material Using Chlorpyriphos 20 ECAs

per IS 6313 part - II (1% concentration by mass) is recommended i.e one litre

65 chemical emulsion diluted 37.00 24.90 S.M

with 19 liter oil base. Total solution will be 20 liters inclusive of one liter

chemical emulsion application at the rate of 7.5 litre chemical / Sqm of surface is

recommended as per I.S.

Providing & Fixing Nylon net (having net weight-0.065 kg/sq.mt) in

66 outside as well as inside plaster / terrace water proofing etc as direct by 52.13 32.00 S.M.

Providing and Replace door, Window S.S. Fixtures fix in wooden /

67 Alluminium door - window with ISI marks as per approoved by engineer in

(A) 4" S.S. Hinge 16.00 125.00 Nos.

(B) 5" S.S. Hinge 9.00 150.00 Nos.

(C) 8" S.S. Aldraf 2.00 180.00 Nos.

(D) 10" S.S. Aldraf 0.00 210.00 Nos.

(E) 12" S.S. Aldraf 0.00 240.00 Nos.

(F) 4" S.S. Handle 4mm. Th. 10.00 150.00 Nos.

SOR 2024-25 & MR

Description Qty. Unit Amount

(G) 6" S.S. Handle 4mm. Th. 0.00 180.00 Nos.

(H) 4" S.S. Stopper 4mm. Th. 10.00 125.00 Nos.

(I) 8" S.S. Stopper 4mm. Th. 1.00 175.00 Nos.

(J) 6" S.S. Pavan Ankdi Heavy duty 10.00 100.00 Nos.

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar

1:1 including neat cement finishing, watering etc. complete.

Ground Floor 4.68 24.28 R.M.

Terrace floor 44.94 24.28 R.M.

"Providing and laying FRP (Fiber Reinforced Plastic) chhajja over doors,

windows and building extensions, factory-moulded with glass-fiber

reinforcement and resin matrix, UV-stabilized, weather-resistant, including

MS brackets, anchor fasteners, anticorrosive painting, sealing of joints, and

complete installation as per specifications and Engineer-in-Charge."

Providing – supplying & fixing top & bottom aluminum frame (50 x 25)

0.95 mm thick & central lock frame with ( 75 x 25 ) 1.03 mm thick color

70 anodized with 4 mm thick ACP (Exterior grade plain colors) with 1.60 2580.00 S.M.

aluminum anodized aldrop, stopper & fixing with S.S screws etc all per

directed by engineer in charge.

Providing & fixing G.i mesh 25X25X3mm used for celling repair fixed

71 with celling rebar column as per directed by enginner incharge rate 5.00 546.00 S.M.

excluding the rebar cost .

RCC Core Cutting is about making precise, circular cuts for creating holes

of required diameters for Rehabilitation in civil

72 works. The core drilling rod is fitted with diamond pieces at the drilling

end. The core cutting machine can be used for

both horizontal and vertical hole making purposes.

73 Polishing flooring after repair work done as direct by E.I.C 41.83 172.00 S.M.

Providing and Fixing Hollow steel Sections Framed Work including

74 Cutting, Hoisting,Welding & Fixing in position Purlin, Main Chord etc.as 50.00 126.00 Kg.

per Engineer in-charge.TATA / JINDAL / ASIAN Make

Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all

equipments, tools, material, labour, etc. Standard procedure as mentioned

in manufacturer's specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of work. The

rate shall also include cost of drilling of hole of required diameter and

75 depth as mentioned in manufacturer's specification, cleaning the hole with

blower and other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but excluding the cost

of reinforcing bar etc. complete. Item includes necessary scaffolding,

staging, labour, tools and equipments, etc. complete as directed by the

engineer-incharge.

Decorative wall paintings with designing, painting at place with all necessary

76 material surface preparation , primer application 2 coats of weather coat paint 300.00 40.00 Sq.ft.

artwork creation including labour

SOR 2024-25 & MR

Description Qty. Unit Amount

Slogan writing on walls designing, painting at place with all necessary matirials

77 surface preparation, primer application 2 coats of whether coat paint, artwork 100.00 30.00 Sq.ft.

creation including labour

Vinyl Sticker any size 1. Eco Solvent vinyl

sticker (120 gsm) with laminate (100 gsm)

Vinyl Sticker any size 2. Solvent vinyl sticker

(120 gsm) with laminate (100 gsm)

80 5 mm PVC sheet Eco vinyl any size 25.00 52.00 Sq.ft.

PART B :- GROUND DEVELOPMENT + COMPOUND

1 Removing Paver block flooring 110.00 10.10 S.M.

Box Cutting the road surface to proper slope and camber for making base

2 includinng removing the excavated stuff and depositing on the road side 18.00 109.41 C.M.

slope as directed up to 50 mt. lead.

Providing & laying cement concrete Pavement using M30 concerte &

3 Vaccuum Dewatering technique including floating surface with a skim 17.00 6548.83 C.M.

powder floater, curing etc. complete.

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D reinforcement for

R.C.C. work incl. bending, binding & placing in position etc. comp. Upto

Providing & filling in plinth with yellow soil or selected soil in layers of

cm. Th'. Incl. watering, ramming & consolidation etc. complete.

Preparation of subgrade with Compacting, Levelling and consolidation of

subgrade with miniroller/plate vibrator machine including watering and

filling in depressions which occur during the process as directed by

engineer-in-charge.

Providing & laying Granular sub base (GSB) confirming to Grading-II of

Table 400.0 of compacted thick of 150mm with specified graded stone

metal and sand mixed in place and laid with mechanical means spreading

7 with motor grader and compacting with vibratory roller having minimum 12.00 1469.00 C.M.

80-100 KN static weight to acheve desired density of 98% of MDD

including all material, labour, machinery with all leads and lift etc.

Providing and laying 200 micron plastic sheet on prepared sub base For

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone

9 agg 20m.m Nominal size)&curing comp. excl. cost of form work in :(a) 10.00 3095.25 C.M.

foundation & Plinth

Supplying & filling fine sand (pana) in 150 mm compacted thickness over

the base including necessary compaction, watering etc. complete. Item

includes leveling by using vibratory plates compacted machine and as

directed by engineer in charge.

Providing & fixing interlocking type Cement Concrete paver block of

approved shape & design having 80 mm thickness (M-50) purchased from

SMC's approved paverblock manufacturer only on fine sand bedding. Item

includes leveling by using vibratory plates compacted machine. Item also

includes all materials, Labour, euipments, tools, plants, watering, cleaning

SOR 2024-25 & MR

Description Qty. Unit Amount

Cutting of Groov 5.00 mm wide in VDS for depth of 250.00 mm of total

thickness making bays of 4.0 mtr x 4.0 mtr. Using groove cutting machine

with diamond cutting wheel and filling of sealent etc. complete as per

directed by Engineer in-charge

Providing 100mm thick readymade C.C. kerb of strength M-20 (size

300mm x 380mm) purchased from SMC's approved paverblock

manufacturer &setting in line, level and in truly vertical position, including

filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust) smooth

pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including

watering etc. complete and as directed by engineer in charge.

For rounding at the edge of footpath (For fanning portion) 10.00 274.00 R.M.

Demolishing Brick work and stone masonry incl. including stacking of

14 serviceable material and disposal of unserviceable material with all lead 5.00 577.92 C.M.

and lift. (ii) In cement mortar

Removing the scraping of old deteriosted plaster of any thickness form

wall/R.C.C. member including strcking of serviceable material and

disposal of unserviceable material from site of work with all lead and lift.

Including Scafholding

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

upto floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand )

complete as per Technical Specification

Providing & Applying 20mm.to 35mm Th.(Max. 35mm thickness

consider) Heavy Roller plaster on walls or similar surfaces at all floor

levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3

sand : racron 3s ( 0.5 nos per bag )) also plaster master wterproofing

17 chemical 100ml /bags as per companey manual & approved by E.I.C or 128.25 417.00 S.M.

consultant & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply

thick cement slurry and apply roller horizontal as well as vartical ( two

times ) up to good quality and size of grain in elevation as per directed by

engineer incharge.

Providing and applying two coats of weather shield max paint (3 coat may

be required in case of darker colours.) of ICI DULEX or Apex ultima of

asian paint including applying exterior acrylic primer coat as per

manufacturers specification and dirctions in shade and colour approved by

architects, on exterior surface of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as directed by the

architects and manufacturers. Surface Preparation

:Surface is throughly clean, dry and free from all loose dirt, chalk, grease,

fungi, algae and flaking paint. This can be achieved by brushing with a

18 wire / stiff coir brush followed by water jetting if required. Fill up all minor 256.50 82.00 S.M.

cracks and defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint must be

throughly scraped off and Clean the surface throughly using wire

brushes. PRIMING:Apply a liberal coat of exterior acrylic primer

and allow it to dry for 4-5 hours. Application of putty is Not recommended.

Minimum 4-6 hours duration is required between each coat of weather

shield max paint.

Providing and fixing and fitting TATA or Jindal make G.I. barbed wire

fencing with necessary barbed wire (12 x 14 guage, weight not less than

0.14 kg. / mt.) pins, hooks, excluding M.S. angles etc. complete as per

relevent IS specification.& directed by engineer in charge

Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or

angle cleats as in main & cross beams,hip & trussed purlins connected to 2.00 9108.48 Qtl.

common raffers & the like.

SOR 2024-25 & MR

Description Qty. Unit Amount

Applying Priming coat over new steel and other metal surface after over

and including preparing the surface by throughly cleaning oil, grease dirt

21 and other foreign matter and scoured with brushed fine steel wool, scrapers 5.00 36.74 S.M.

and sand paper with ready mixed priming paint brushing red lead.

Painting two coat (excluding priming coat) on new steel and other metal

22 surface with synthetic enemal paint, burshing to give an even shade 5.00 68.57 S.M.

including cleaning the surface of all dirt, dust and other foreign matters.

PART C :- ELECTRICAL WORKS

Part-01 Point wiring in Copper (MODULAR)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push & accessories and earth

1 continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade ZHFR PVC

insulated multi strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection with primary light

with accessories erected on Metal / PVC / wooden box covered with

mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring.

with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade ZHFR PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step type electronic fan

3 regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

Cat. III 0.00 670.24 Pt.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Cat. III 3.00 708.41 Pt.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade ZHFR PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

4 with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules erected

on / in wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

SOR 2024-25 & MR

Description Qty. Unit Amount

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Cat. III 2.00 535.55 Pt.

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade ZHFR PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on surface of

wall / ceiling complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic box covered with appropriate front plate modules erected

on / in wall / ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Cat. III 2.00 782.65 Pt.

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories

Conduits & Pipes

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required

9 nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes. 20.00 17.17 Mtr.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping)

having double-locking arrangement with grooves, trunking of size not

10 below 12.5 mm in height as per IS with accessories of PVC/Resin 5.00 31.31 Mtr.

polypropylene not below 1.8 mm thick duly sealed in joint & erected on

wall / ceiling of following size .(2) 25 mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 50.00 62.62 Mtr.

(b) 2 wire 2.5 sq. mm 50.00 82.82 Mtr.

(C) With oval conduit /PVC casing capping double lock type

(a) 2 wire 1.5 sq. mm 20.00 56.56 Mtr.

12 (b) 2 wire 2.5 sq. mm (From LDB to SB and SB to SB ) 30.00 82.82 Mtr.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall /

13 ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (C) with oval

conduit /PVC casing capping double lock type

(a) 2 wire 4 sqmm 10.00 112.11 Mtr.

(g) 4 wire 4 sq. mm 5.00 180.79 Mtr.

(b) 2 wire 6 sq. mm 5.00 147.46 Mtr.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable

1.1 KV grade to be erected as directed of following size.

(E) 3 core 2.5 Sq. mm 50.00 137.36 Mtr.

Part-02 LT Switchgear, Distribution Boards & LT Panel

SOR 2024-25 & MR

Description Qty. Unit Amount

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

15 rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as

directed (i) 25 Amps.DP Cat. III

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Providing & erecting 240 V MCB double pole switch for motor &

18 inductive load (C Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp.

Cat III 2.00 299.97 Ea.

sheets Steel powder coated enclosure suitable for incorporating One/Two

Providing and erecting metallic vitrified danger notice board as per

20 language suggested by engineer incharge for MEDIUM VOLTAGE 2.00 69.69 Ea.

installation to be erected as per IS-2551.

Solder less crimping type Copper lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

Part-03 Indoor Lighting Item

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V, Power Factor more

22 than 0.9, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED

driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet 10.00 373.70 Ea.

Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

23 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts 2.00 112.11 Ea.

SOR 2024-25 & MR

Description Qty. Unit Amount

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection.

(i) above 36 to 48 watts

Cat-lll 2.00 3345.12 Ea.

Part-04 Fan & Accessories

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

25 1200 mm sweep complete having 3blades with aluminium blades with , 3.00 1948.29 Ea.

canopy & 30 cm. down rod erected with earthing. (Make shall be approved

by Engineer in charge)

Supply, Installation, Testing and Commissioning of suitable sweep, BEE

Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent

ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium

blades, 2 nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-

26 2019), THD < 10%, with remote unit for Speed Control and all remaining 2.00 2885.57 Ea.

accessories including safety pin, nut bolts, washers, temperature rise =

degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with

surge, over current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall be approved by

Engineer in Charge] (B) 1200 mm Sweep (48")

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

27 down rod erected duly painted for fan complete with proper insulation 3.00 108.07 Mtr.

without leckage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

Supplying & erecting single phase approved make industrial exhaust fan

29 suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM Cat.II 1.00 2054.34 Ea.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

Part-05 Earthing System

Providing and erecting required size HOT deep Galvanised iron strip for

31 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. 5.0 77.77 Kg.

using proper clamp.

SOR 2024-25 & MR

Description Qty. Unit Amount

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover

32 (A)(approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted by

[A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr 1.0 5842.85 Ea.

Back filling compound - 1 Nos. of Bag of 15 Kgs.

33 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1.0 794.87 Kg.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B'

grade G.I. pipe with necessary coupling buch buried in specially prepared

earth pit & G.I. earth wire of 8 SWG erected & connected as directed (For

36 For using salt and charcoal / coke as required for pipe type earthing. 2.0 171.70 Ea.

Supplying & erecting funnel type earthing having earth plate of following

size burred in specifically prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia.

G.I. pipe with Funnel with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length

of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug to

the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete

connected to the nearest switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As per drawing) with

following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 1 2311.89 Ea.

38 ABC TYPE FIRE EXTINGUISHER :-

6KG CAPACITY 1.00 1,896.02 NOS

(MAKE:- SAFEX / KANEX / V-SAFE)

39 CO2 TYPE FIRE EXTINGUISHER :-

4.5KG CAPACITY 1.00 4,740.06 NOS

(MAKE:- SAFEX / KANEX / V-SAFE)

G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING

(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED

PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,

BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS, FITTINGS

SUCH AS REDUCERS, TEES, ELBOWS, FLANGES. INCLUDING

CUTTING, WELDING, FIXING IN/ON WALLS, (MAKE:- ASIAN /

50MM DIA 20.00 929.11 MTRS

Part-07 Motor, Pumps & Starter

Providing & erecting open well type horizontal mono block pump set with

stainless steel body having following specification

(C) 1 H.P. single phase open well motor pump set suitable for 185 LPM

discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe with 0 9613.18 Ea.

SOR 2024-25 & MR

Description Qty. Unit Amount

Providing & erecting open well horizontal mono block pump set with cast

iron body, complete for three phase submersible motor having

[A] For 1.5 HP 3 phase open well horizontal mono block pump set suitable

for 190 LPM @ 20 mtr head suitable for 40 mm dia delivery pipe 1 10284.83 Ea.

Supplying and erecting Direct On-line Electronics Starter with 2-5/4-10/8-

14/10-16 Amp. Rating relay (variable current setting) directly operated in

totally insulated elegant enclosure and 18 Amp. Rating power relay with

start - stop button for single phase operation up to 3 HP as per complete

43 erected on P.W. Block with following features. 1 1603.88 Ea.

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

Supplying & erecting approved make Automatic liquid level controller

6A.as per instruction of Engineer in charge on site complete with wiring

connection with existing wires , with copper conductor from pump to

upper and lower tank.

Supplying & erecting approved make self-priming domestic monoblock

water pump with 1 H.P motor, suitable for operation on 230 volts, 50c/s.

45 AC supply with metallic flange, and M.S. impeller delivery and following

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia. Delivery Cat.III 1 7679.03 Ea.

S.I.T.C. of single phase submersible pump set suitable for 100 mm size or

more dia bore well having motor capacity and discharge as under with

necessary panel box. Lifting and Lowering taken extra.

(a) Motor rating 1 HP (12 stage) pump having capacity of 50 LPM at 43 to

45 mtr head suitable for 32 mm dia. delivery pipe

Cat.II 0 15595.41 Ea.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

47 flexible Submersible copper cable approved make of following Size.

(A) 3 Core x 1.5 Sq. mm. 50 65.65 Mtr

Part-08 Water Cooler & Purifier

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet

temp. of the water should drop by 150 C within a hour, The water cooler

47 should be comprising of hermetically sealed compressor, fan motor, 1 49559.69 Ea.

condensing unit, water tank surrounded by evaporating coil, thermostats,

relay etc. complete with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel.

SITC of Water Purifire Eureka Forbs Make AG 200 or Equivalent 1 10605.00 Ea.

Supplying and erecting water filter cum purifier with ultra violate

48 technology. (Aquaguard / waterdoc model or equivalent symphony/ 1 5424.71 Ea.

crystal/videocon model)

Part-09 Other Work

Supplying & erecting approved make SMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements with mounting

clamp with nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.

(B) 250mm x 200mm x 100mm [deep] 2 515.10 Ea.

SOR 2024-25 & MR

Description Qty. Unit Amount

Providing and erecting street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class

M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /

80mm. / require size pole top having sufficient fasteners for fixing the

brackets and having spread of 1 mtr. length with suitable rise as per site

condition & suitable welded stiffener reducer and nipple with check nut

complete painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr 2.00 561.56 Ea.

Supplying and erecting HYLAM sheet on existing angle iron frame.for

following thickness

TOTAL (A) ANGANWADI AT BHARTHANA-3

(B) ANGANWADI AT LAL TAMBU KOSAD VILLAGE

PART A:- REPAIR + REHABILITATION

1 Providing & Applying 20mm.to 35mm Th.(Max. 35mm thickness

consider) Heavy Roller plaster on walls or similar surfaces at all floor

levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3

sand : racron 3s ( 0.5 nos per bag )) also plaster master wterproofing

chemical 100 ml /bags as per companey manual & approved by E.I.C or

consultant & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement:1 sand) apply

thick cement slurry and apply roller horizontal as well as vartical ( two

times ) up to good quality and size of grain in elevation as per directed by

engineer incharge

up to plinth level 12 417.00 S.M.

WORK ABOVE PLINTH LEVEL

2 Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost of

form work and rendering but excluding cost of reinforcement. (With using

plastisizer compulsory)

(A) foundation, footing, base of columns and mass concrete

For Sintex Tank (Upper Terrace) 1 4413.60 C.M.

3 Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost of

form work and rendering but excluding cost of reinforcement. (With using

plastisizer compulsory)

(1)Having c/s area up to 0.08 s.mt

Ground Floor 0 12930.68 C.M.

First Floor (Terrace Floor) 0 12971.23 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt

Ground Floor 0 11253.32 C.M.

First Floor (Terrace Floor) 0 11293.87 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0 9288.03 C.M.

First Floor (Terrace Floor) 0 9328.58 C.M.

(1)Having c/s area up to 0.08 s.mt

Ground Floor 0 9083.57 C.M.

First Floor (Terrace Floor) 0 9124.12 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt

Ground Floor 0 8155.37 C.M.

First Floor (Terrace Floor) 0 8195.92 C.M.

SOR 2024-25 & MR

Description Qty. Unit Amount

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0 7067.84 C.M.

First Floor (Terrace Floor) 0 7108.39 C.M.

2) Slabs having more than 8cm. and upto 10 cm. Th'.

Ground Floor 0 7965.38 C.M.

First Floor (Terrace Floor) 0 8005.93 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.

Ground Floor 0 7377.92 C.M.

First Floor (Terrace Floor) 0 7418.47 C.M.

4) Slabs having more than 13 cm. Thickness

Ground Floor 0 6793.97 C.M.

First Floor (Terrace Floor) 0 6834.52 C.M.

Ground floor 0 7119.46 C.M.

First Floor (Terrace Floor) 0 7160.01 C.M.

Ground floor 0 9963.33 C.M.

First Floor (Terrace Floor) 2 10003.88 C.M.

4 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C.

work incl. bending, binding & placing in position etc.comp.---Ground

Ground floor 8 77.29 Kg.

First floor (Terrace Floor) 99 78.34 Kg.

5 Providing throatingor plasterdrip and moulding it toR.C.C. chajja

etc.comp.. For all Floor (M.R.)

6 Providing 20mm deep finished groove in plaster in lineand level etc.

Comp. For all Floor (M.R.)

DISMANTLING WORKS

7 Demolition of brick work and stone masonry including stacking of

serviceable materials and disposal of unserviceable materials with all lead 1 577.92 C.M.

and lift. (i) On Cement Mortar

8 Removing the scraping of old deteriosted plaster of any thickness form

wall/R.C.C. member including strcking of serviceable material and 57 20.55 S.M.

disposal of unserviceable material from site of work with all lead and lift.

9 Demolition including stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.' 0 1110.75 C.M.

10 Demolition of terrace including stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift.' 45 66.81 S.M.

1.) Brick tile covering

11 Dismantling C.I. Pipes, G.S.W. Pipes and A.C.,PVC rain water pipes with

fittings and clamps including stacking the materials with all lead & lift ( 50 78.51 R.M.

For any Dia. of pipes )

12 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc.

stacking of serviceable materials and disposal of unserviceable materials 0 56.79 S.M.

with all lead and lift. (ii) A.C. sheet roofing.

SOR 2024-25 & MR

Description Qty. Unit Amount

13 Dismantling Doors, Windows, Ventilators etc. (wood or steel) shutters

including chowkhats, architreaves, holdfasts, and other attachment etc.

complete and stacking them within all lead and lift.

(1) Not exceeding 3 sq. meters in area .

14 Dismentaling of Tiles floors laid in mortar including stacking of

serviceable material and disposal of unserviceable material with all lead 2 50.11 S.M.

REPAIR & REHABILITATION WORKS

15 Fixing clerestory window chowkhats in existing openings including cutting

masonry for hold fasts, embedding hold fasts in cement concrete blocks

with cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm single size), painting two coats of coal tar to sides of 1 399.00 NOS.

chowkhats and making good the damge to walls complete including

disposal of rubbish to the dumping ground within

16 Providing and applying cement mortar (1:3) modified by using polymer

and expanding grout additives at various thickness for repair/strengthening

of various RCC elements at all floor levels, lead, lift, including breaking,

chipping, dismentling existing cover concrete and exposing existing

reinforcement, applying wirebrush for making surfaces of steel and

concrete free from rust and other loose materials, applying rust removing

chemical on existing reinforcement, applying anti-corrosive coating on

existing reinforcement, applying polymer bonding agent on existing

concrete surfaces before applying polymer modified mortar in specified

thickness as directed by the Engineer-in-charge.

The rates shall also include providing and applying 12 mm thick cement

mortar (1:4) modified with plasticizer for finishing smooth the repaired

surfaces, providing and applying curing agent on the repaired surfaces, etc.

complete as directed by the Engineer-in-charge. The make and quality of

rust removing chemical, anti-corrossive coating, polymer bonding agent,

polymer and expanding grout additives, plasticizer, curing agent, etc. shall

be approved by engineer-in-charge. The procedure for application shall be

strictly in accordance with manufacturer's detail specification, which shall

be submitted before start of work and shall be approved by the Engineer-in-

The rates shall include the cost of providing, erecting and maintaining

leakproof shuttering /formwork /scaffolding, etc. to be used for the

purpose, providing and erecting props, temporary frame work and maintain

them in position for required time, to existing load bearing elemnts for

reliving loads coming on to structural members being

repaired/strengthened but excludes the cost of reinforcement.

The rates shall include the cost of providing, erecting formwork with

drainage outlet for presocking and air venting. The formwork shall be such

that it provides suitable excess points to pour or pump the mixed micro

fluid concrete in place. The cost shall also include providing and erecting

props, temporary frame work and maintain them in position for required

time, to existing load bearing elements for relieving loads coming on to

structural members being repaired/strengthened but excludes the cost of

chemical use BASF, Sunanda, Fosroc, Pidilite etc as per Approved by

engineer incharge

(Note:- Only Single Payment Consider For Same Work)

0mm To 25mm thickness 3 1208.00 S.M.

0mm To 50mm thickness 3 2348.00 S.M.

17 Providing Formwork of ordinary timber planking so as to give rough finish

including centering, Shuttering, Struting and propping etc. height of

propping and centering below supporting floor to ceiling nott excluding

4m and removal of the same for Cast in situ reinforced concrete and plain

(G)Column, pillers, post and strusts

(i)Square rectangular polygonal in plan (upto 10 ton) 2 320.70 S.M.

SOR 2024-25 & MR

Description Qty. Unit Amount

18 Providing and applying cement mortar 1:4 enriched with expanding grout

additive in required proportion in cement for repair of cracks in RCC and

non-RCC members after making 25mm x 25mm groove, cleaning the

surface and applying coat of bonding, finishing smooth the repaired

surfaces, providing and applying curing agent on the repaired surfaces, etc.

complete at all floor levels as directed by engineer-in-charge. The make and 50 120.00 R.M.

quality of expanding grout additives, bonding agent, curing agent, etc. shall

be approved by the engineer-in-charge. The procedure for application shall

be strictly in accordance with manufacturer's detail specification, which

shall be submitted before start of work and shall be approved by the

Engineer-in-charge.

19 Carrying out Injection grouting for cracks in RCC structural members by

drilling holes of 15 mm diameter upto minimum depth of 75 mm, fixing

aluminium nozzle / rubber pipe using non-shrink epoxy putty, injecting

epoxy grout material at specified pressure with grouting pump till it the

material refuses to impregnate inside the hole. If required or suggested by

the Engineer-in-charge, injection grouting shall be carried out more than

once for a hole to assure proper spreading of grout material and filling of

capillaries / voids within the element. After satisfactory injection grouting,

the nozzle/pipe shall be cut and sealed by non-shrink epoxy putty. The

surface shall be finished smooth with C:M (1:4) and reinstated to the

original condition as directed by the Engineerin-charge.

The rate shall include the cost of providing and supplying all tools,

materials ,labour, scaffolding, props, formwork,etc.complete.The make and

quality of epoxy grout, epoxy putty, etc. shall beapproved by the Engineer-

in-charge.The procedure for application shall be strictly in accordance with

manufacturer's detail specification, which shall besubmitted beforestart of

workand shall beapprovedby theEngineer-in-charge. (Actual noof holes and

their locations shall be as decided by the Engineer-in-charge)

chemical use BASF, Sunanda, Fosroc, Pidilite etc as per Approved by

engineer incharge

20 Carrying out Injection grouting for cracks in RCC structural members by

drilling holes of 15mm diameter up to minimum depth of 75mm, fixing

aluminium nozzle/ rubberpipeusingcementitiouscompound, injecting

polymer modified slurry (SBR+cement+water) 1:1:1material at specified

pressure with grouting pump till it thematerial refuses to impregnate inside

the hole. If required or suggestedby theEngineer-in-charge, injection

grouting shall be carried out more than once for a hole to assure proper

spreading ofgroutmaterial and fillingof capillaries / voids with in

theelement. After satisfactory injection grouting, then ozzle/pipes hall

becut andsealed by non-shrinke poxy putty. The surfaces hall be finished

smooth with C:M(1:4) and reinstated to the original conditionasdirected

by the Engineer-in-charge.

The rate shall include the cost of providing and supplying all tools,

materials, labour,scaffolding, props, formwork,etc.complete.The make and

quality of epoxy grout, epoxy putty, etc. shall be approved by the Engineer-

in charge. The procedure for application shall be strictly in accordance with

manufacturer's detail specification, whichshall besubmittedbeforestart of

workand shall be approved by the Engineer-in-charge. (Actual NOS of

holes and their locations shall be as decided by the Engineer-in-charge)

SOR 2024-25 & MR

Description Qty. Unit Amount

21 Providing and appliying thixotropic Making up lost section of concrete /

mortor with thixotropic repair mortor of one-component, normal-setting,

shrinkage-compensating, thixotropic mortar for layers up to 20 mm thick.

Supply and application of one-component, normal-setting, shrinkage-

compensating thixotropic mortar made from cementitious binders, selected

aggregates, special additives and synthetic polyacrylonitrile fibres, for

reconstructing deteriorated concrete structures. Apply the mortar after

adequate preparation of the substrate by removing all deteriorated concrete

to form a sufficiently-rough, solid substrate with no detached portions.

Clean the steel reinforcement down to bare metal and apply a passivating

treatment by brush-applying two coats of one-component, anti-corrosion

cementitious mortar. Apply the product by trowel or spray with a

continuous-feed rendering machine on a clean substrate saturated with

water in layers up to 20 mm thick.

To improve expansion in the open air during the first few days of curing,

add a special curing additive when mixing the mortar to reduce both plastic

and hydraulic shrinkage at a dose of 0.25% in weight on the weight of the

mortar. The product must comply with the minimum requirements of EN

1504-3 for structural mortars and have the following performance

characteristics:

Compressive strength (EN 12190) (MPa):> 40 (after 28 days), Flexural

strength (EN 196/1) (MPa): 7 (after 28 days), Compressive modulus of

elasticity (EN 13412) (GPa): 25 (after 28 days) Adhesion to substrate (EN

1542) (MPa):> 2 (after 28 days), Capillary absorption (EN 13057)

(kg/m²•h0.5): < 0.20, Thermal compatibility measured as adhesion

according to EN 1542 (MPa): – freeze-thaw cycles with de-icing salts (EN

13687/1): > 1.5 (after 50 cycles), Storm cycles (EN 13687/2):> 1.5 (after

30 cycles), dry thermal cycles (EN 13687/4):> 1.5 (after 30 cycles),

Reaction to fire (EN 13501-1) (Euroclass):1

Consumption (per cm of thickness) (kg/m²): approximately 18.5 Kg

included and calculated in the price for work carried out according to

specification: (1) hydro-cleaning of adhesion surfaces and saturation of

substrate with water immediately before applying the mortar; (2)

application of the mortar by trowel or spray around steel reinforcement; (3)

levelling off surfaces with a straight edge and final tamping; (4) careful

curing of the mortar by spraying on water for at least 7 days (3times) after

(Note:- Only Single Payment Consider For Same Work)

0 MM TO 25 MM THICK 3 1370.00 S.M.

0 MM TO 50 MM THICK 3 2460.00 S.M.

22 Pointing on brickwork with cement mortar 1:1 (1-cement : 1- coarse sand)

(B) Ruled pointing.

MASONARY & PLASTER WORKS

23 Masonary work using Aerated light weight concrete block having crushing

Ground floor 0 4644.08 C.M.

First floor (Terrace Floor) 1 4689.24 C.M.

24 Providing 20mm thick double coat mala cement plaster on brick/concrete

Ground Floor 35 286.10 S.M.

25 Providing & Applying 20mm.to 35mm Th.(Max. 35mm thickness

Outside All Floor Plaster 35 417.00 S.M.

26 Apply two coats of putty and two coats of primer of approved brand and

(A) for wall and similar surfaces 138 40.59 S.M.

27 Painting two coats of enamel paint over priming coat (including priming 24 90.00 S.M.

28 Wall painting (two coats) with plastic emulsion paint of approved brand 115 83.36 S.M.

29 Providing and applying two coats of weather shield max paint (3 coat may

SOR 2024-25 & MR

Description Qty. Unit Amount

(A) For wall 187 82.00 S.M.

30 Applying Priming coat over new steel and other metal surface after over 12 36.74 S.M.

31 Applying Priming coat over new wood & wood surface after & incl. 2 43.10 S.M.

32 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, 2 1467.72 S.M.

33 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting 0 1135.80 S.M.

34 Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of slab including 0 1019.39 S.M.

rubbing and polishing etc. complete. (A) 25mm thick

35 Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with 7 1130.79 S.M.

pigment to match the shade of slab including rubbing and polishing etc.

36 Providing & laying granite slab 18mm thick in Window-Door seal Frame

Etc laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with

nessary adhesive material and finished with flush pointing in white or 1 2026.00 S.M.

colour cement, including rubbing & polishing comp.. (Basic Rate:-

37 Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bellmakeat all floor levels, in flooring, treads of

steps & landings laid on a bed of 12mm. Av.Th.C.M.1:3 (1cement :3sand) 2 900.29 S.M.

finished with flush pointing in white cement etc.com. For all floors

38 Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of

steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary 5 932.02 S.M.

cement paste for fixing and joined with white cement slurry etc. complete.

39 Labour charges for edge finishing for granite 21 43.43 R.M.

WATERPROOFING WORKS

40 NOTE :- (1) The whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma duly

stamped (2) The rate shall include for work at all floors & conducting

water proof test as directed. (M.R.)

(B) Providing and laying integral cement based water proofing treatment 50 511.00 S.M.

SOR 2024-25 & MR

Description Qty. Unit Amount

41 Providing & Applying Surface Water Proofing treatment on existing

Water proofing.

(1) Cleaning Surface Slab up to Mother slab & free from any Loose

Material. Paint, Dust, Greaze or Remove all existing bituminious Coating

Completely. It is recommended to use intense wise brushing on high speed

Water jet for through Cleaning.

(2) The Substrate must be checked for its Soundness using Small hammer.

All Cracks at corner joint, Channels and Parapet Should be Properly

(3) Cracks/construction joints treatment: Opening the cracks/construction

joints,if any, in V/U shape using electrically operated cutting machine.

Cleaning the surface thoroughly from dust and loose partical using wire

brush and air blower. Filling the cracks if any with polymer modified

cement mortar hybrid PU Sealant depending on the width of crack/joint.

(4) Epoxy primer:The Epoxy primer must be applied on clean and dry

surface by mixing base and hardner in equal proportions with the help of

strirrer and adding equal amount of water and appling on the surface at 80-

100 grams per sqmt and allowed it to dry untill tack free.

(5) Hybrrid polyurea part-A(base) and part-B(hardner) are packed in two

separate containers having the correct predetermined mixing ratio by

weight.Stir individual container separately,Part-A and PArt-B very well, to

get homogeneous material. The whole quantity of Part-B is added into Part-

42 Providing and laying broken China mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar crème out upto

surface using white cement including rounding off junctions and extending

them upto 15 C.M. along the wall, clearing with water and oxalic acid etc.

WATER SUPPLY & SANITARY WORKS

43 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110

mm diameter with jali of the following nominal diameter of self cleaning

design with C.I. scread down or hinged grating including the cost of

cutting and making

good the walls.

All floor 1 586.27 NOS

44 Providing & Fixing U-PVC pipe (SWR) confirming to IS NOS

(Type "B") of Prince/Supreme/Jain/Astral/Tulsi/FiNOSlex make for soil

and waste discharge system at all floor levels incl. All fixtures like bends,

tees, shoe etc. jointed with resin of approved brand & manufacture etc.

45 Providing & fixing G.I. Rain water spout of 50 mm dia & 30 C.M. length

All floors level 2 101.91 NOS

46 Providing and constructing simple chamber with 23C.M.. th. brick

masonary walls in c.m. 1:5 with cement plaster 15mm. thick in c.m. 1:3

inside and outside to exposed faces,R.C.C. top slab with 1:2:4

mix,foundation concrete 1: 5:10 and fixing C.I. cover with frame to be

NOSt less than 38 Kg.. on top etc. comp. Inside dim. 455 X 610mm X

mm deep for single pipe.

(A) Same as above but Precast RCC heavy duty Cover instead of C.I.

47 Extra for every additional depth of 0.1 mt beyond 0.45 mt. 3 242.39 NOS

SOR 2024-25 & MR

Description Qty. Unit Amount

48 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor

levels, size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for water

closet squatting pan joining the trap with the pan & soil pipe in C.M. 1:1 1 3277.39 NOS

(1cement :1 fine sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Jaquar ,HindWare

49 Providing & fixing Wash Hung basin with single hole for pillar tap , Size-

550 x 400 mm at all floor levels, with C.I. or M.S. Brackets painted white

incl. cutting holes & making good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Jaquar SLS- WHT -6801,HindWare10004

50 Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels,

polished bright etc. comp.

Make- Cera F2013151 BIB COCK, HindWare F280002 BIB COCK,

Jaquar FLR-5047 N BIB COCK

51 Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101

Jaquar FLR 5083 KN , CONCEALED BODY ALD-081,HINDWARE

F730013 & CONCEALED STOP COCK F850095

52 Providing & fixing C.P. brass pillar cock with copper connection, C.P.

brass screws complete

Make- Cera F2013101, HindWare Cat. No.: F650003, Jaquar FLR- 5011N

53 Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P.

copper connecting pipe 450 mm long and nuts, washer and brass flange

complete, including cutting and making good the wall where

Make- Cera F1020362, HindWare Cat. No.: F440020 F850094,

jaquar CON 053 KN

54 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/FiNOSlex make for water supply line at all floor levels incl.

fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. Pipe shall be fixed on the wall the help of clamp at

every two meter C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

55 Providing & Fixing gun metal check or NOSn return full way wheel valve

at all floors levels, etc. complete. (A) 15 mm. dia.

(B) 25 mm. dia. 1 420.63 NOS

(C) 40 mm. dia. 1 663.43 NOS

56 Providing & Fixing abonite ball cock of approved qualities directed etc.

comp. 1 102.91 NOS

(A) 25 mm. dia.

57 Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp. (A) 75 mm. dia. 1 40.00 NOS

(B) 110 mm Dia. 1 50.00 NOS

SOR 2024-25 & MR

Description Qty. Unit Amount

58 Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(C.M. 1:3 [1 cement :3

coarse sand]) finishing as per instruction given by Eng. incharge. MR

(A) 75 mm PVC PIPE 3 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 3 180.00 R.M.

59 Providing & fixing Z - clamps at all floor levels of approved design to C.I.

S.C.I. or PVC pipes including the cost of cutting holes & making good the

wall etc. Complete - 100 mm dia as per architect instructions

(A) 40 to 50 mm dia 6 62.00 NOS

(B) 75 to 90 mm dia 6 75.00 NOS

(C) 110 mm dia to upto 150 mm dia 6 90.00 NOS

60 Removal of Sintex tank with all fittings and refixing at same location but

on the pedastal of 0.3m height from slab level with all necessary fittings

and fastenings as per requirements and as per directions of engineer in

charge. As per M.R. (1000 lit to 10,00 Lit. any size od Tank)

61 Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI)

mark water tank of required capacity each with all necessary fittings 2000 3.95 Lits

& connection etc. complete on terrace. (sintex tank 10000 lit.)

62 Vegetation Removal from building 1 1500.00 JOB

63 Providing & Fixing M.S.Grills of required pattern to wooden frames of windows

etc. at all floor levels with M.S.flats at required spacing & frame around square or

round bars with round headed bolts & round heade bolts and nuts or by screws 70 109.41 Kg.

incl. Priming coat of Red lead paint etc. comp.

64 Apply hacking on RCC member manual or by mechanical as discoused by

engineer incharge. 350 - 400 notches (dents) per sqmt. Process of making the

back ground rough before plastering for better bonding of mortar with RCC 75 20.00 S.M.

65 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face

water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both side

with adhesives as specified by the manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood frames of finished size 12cm x 1 3720.00 S.M.

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum fixtures &

fastenings For all Floor

Same as Above But Without Frame 1 2520.00 S.M.

66 Carrying out wall treatment for termite control including spraying with chemical

solution in oil base including labour and material Using Chlorpyriphos 20 ECAs

per IS 6313 part - II (1% concentration by mass) is recommended i.e one litre

chemical emulsion diluted with 19 liter oil base. Total solution will be 20 36 24.90 S.M

litersinclusive of one liter chemical emulsion application at the rate of 7.5 litre

chemical / Sqm of surface is recommended as per I.Schemical emulsion

recommended as per I.S.

67 Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with ISI specification. Using Chlordene and Chiorpurfiles 20 EC. As

per 6131_paret-II Consentration Weight one percent is recommended i.e. one 42 87.03 S.M.

litre 20 EC chemical emulsion with 19 liter give 1% concrentration inclusive of

one litre chemical emulsion appication at the rate of 5 litre chemical / Sqm of

surface is recommended as per IS.

68 Providing & Fixing Nylon net (having net weight-0.065 kg/sq.mt) in outside as

well as inside plaster / terrace water proofing etc as direct by E.I.C 70 32.00 S.M.

69 Providing and Replace door, Window S.S. Fixtures fix in wooden / Alluminium

door - window with ISI marks as per approoved by engineer in charge.

(A) 4" S.S. Hinge 15 125.00 Nos.

(B) 5" S.S. Hinge 9 150.00 Nos.

SOR 2024-25 & MR

Description Qty. Unit Amount

(C) 8" S.S. Aldraf 2 180.00 Nos.

(D) 10" S.S. Aldraf 4 210.00 Nos.

(E) 12" S.S. Aldraf 0 240.00 Nos.

(F) 4" S.S. Handle 4mm. Th. 10 150.00 Nos.

(G) 6" S.S. Handle 4mm. Th. 2 180.00 Nos.

(H) 4" S.S. Stopper 4mm. Th. 10 125.00 Nos.

(I) 8" S.S. Stopper 4mm. Th. 4 175.00 Nos.

(J) 6" S.S. Pavan Ankdi Heavy duty 10 100.00 Nos.

70 Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1

including neat cement finishing, watering etc. complete.

Ground Floor 17 24.28 R.M.

Terrace floor 23 24.28 R.M.

71 "Providing and laying FRP (Fiber Reinforced Plastic) chhajja over doors,

windows and building extensions, factory-moulded with glass-fiber

reinforcement and resin matrix, UV-stabilized, weather-resistant, including MS 0 3136.00 S.M.

brackets, anchor fasteners, anticorrosive painting, sealing of joints, and complete

installation as per specifications and Engineer-in-Charge."

72 Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows &

clear story windows incl. Indian teak wood frames of finished size12cmx

7cm.incl. anodized aluminum fixtures & fastenings incl. Primer coat of approved 2 5533.68 S.M.

quality & two coats of oil painting etc. For all Floor (A) Fully Panelled

73 Aluminum section Window opening and refixing with all necessary fix & fiting

etc maid in wisely

74 Providing – supplying & fixing top & bottom aluminum frame (50 x 25)

mm thick & central lock frame with ( 75 x 25 ) 1.03 mm thick color anodized

with 4 mm thick ACP (Exterior grade plain colors) with aluminum anodized 1 2580.00 S.M.

aldrop, stopper & fixing with S.S screws etc all per directed by engineer in

75 Providing & fixing G.i mesh 25X25X3mm used for celling repair fixed with

celling rebar column as per directed by enginner incharge rate excluding the 5 546.00 S.M.

76 RCC Core Cutting is about making precise, circular cuts for creating holes of

required diameters for Rehabilitation in civil works. The core drilling rod is fitted

with diamond pieces at the drilling end. The core cutting machine can be used

for both horizontal and vertical hole making purposes.

77 Polishing flooring after repair work done as direct by E.I.C 0 172.00 S.M.

78 Providing and Fixing Hollow steel Sections Framed Work including Cutting,

Hoisting,Welding & Fixing in position Purlin, Main Chord etc.as per Engineer in- 50 126.00 Kg.

charge.TATA / JINDAL / ASIAN Make

79 Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments,

tools, material, labour, etc. Standard procedure as mentioned in manufacturer's

specifications shall be strictly followed, which shall be submitted and got

approved from the authority prior to start of work. The rate shall also include cost

of drilling of hole of required diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required airblower and other necessary tools

and tackles, positioning, providing and grouting chemical, allied fixtures and

fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and equipments, etc.

complete as directed by the engineer-incharge.

SOR 2024-25 & MR

Description Qty. Unit Amount

80 Decorative wall paintings with designing, painting at place with all necessary

material surface preparation , primer application 2 coats of weather coat paint 300 40.00 Sq.ft.

artwork creation including labour

81 Slogan writing on walls designing, painting at place with all necessary matirials

surface preparation, primer application 2 coats of whether coat paint, artwork 100 30.00 Sq.ft.

creation including labour

82 Vinyl Sticker any size 1. Eco Solvent vinyl

sticker (120 gsm) with laminate (100 gsm)

83 Vinyl Sticker any size 2. Solvent vinyl sticker

(120 gsm) with laminate (100 gsm)

84 5 mm PVC sheet Eco vinyl any size 25 52.00 Sq.ft.

PART B :- GROUND DEVELOPMENT + COMPOUND

GROUND DEVELOPMENT WORKS

1 Removing Paver block flooring 70 10.10 S.M.

2 Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft soil-With Manual Labour

(1) Up to 1.5 Mt. depth 11 212.52 C.M.

3 Providing & laying cement concrete Pavement using M30 concerte & Vaccuum

Dewatering technique including floating surface with a skim powder floater, 11 6548.83 C.M.

curing etc. complete.

4 Providing & fixing IS Mark TMT Bar FE 500 / FE 500D reinforcement for

R.C.C. work incl. bending, binding & placing in position etc. comp. Upto

5 Providing & filling in plinth with yellow soil or selected soil in layers of 20 cm.

Th'. Incl. watering, ramming & consolidation etc. complete.

6 Preparation of subgrade with Compacting, Levelling and consolidation of

subgrade with miniroller/plate vibrator machine including watering and filling in

depressions which occur during the process as directed by engineer-in-charge. 70 9.00 S.M.

7 Providing & laying Granular sub base (GSB) confirming to Grading-II of Table

400.0 of compacted thick of 150mm with specified graded stone metal and sand

mixed in place and laid with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN static weight to 8 1469.00 C.M.

acheve desired density of 98% of MDD including all material, labour, machinery

with all leads and lift etc. complete.

8 Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S

9 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

20m.m Nominal size)&curing comp. excl. cost of form work in :(a) foundation & 6 3095.25 C.M.

10 Supplying & filling fine sand (pana) in 150 mm compacted thickness over the

base including necessary compaction, watering etc. complete. Item includes

leveling by using vibratory plates compacted machine and as directed by 0 1016.00 C.M.

engineer in charge.

SOR 2024-25 & MR

Description Qty. Unit Amount

11 Providing & fixing interlocking type Cement Concrete paver block of approved

shape & design having 80 mm thickness (M-50) purchased from SMC's

approved paverblock manufacturer only on fine sand bedding. Item includes

leveling by using vibratory plates compacted machine. Item also includes all

materials, Labour, euipments, tools, plants, watering, cleaning etc. complete.

12 Cutting of Groov 5.00 mm wide in VDS for depth of 250.00 mm of total

thickness making bays of 4.0 mtr x 4.0 mtr. Using groove cutting machine with

diamond cutting wheel and filling of sealent etc. complete as per directed by 200 50.00 R.M.

Engineer in-charge

13 Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x

380mm) purchased from SMC's approved paverblock manufacturer &setting in

line, level and in truly vertical position, including filling joints in C.M. 1:1 (1 part

of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of cement : 40 228.00 R.M.

1 part of coarse sand) including watering etc. complete and as directed by

engineer in charge.

For rounding at the edge of footpath (For fanning portion) 10 274.00 R.M.

COMPOUND WALL REHEBLITATION

14 Demolishing Brick work and stone masonry incl. including stacking of

serviceable material and disposal of unserviceable material with all lead and lift. 1 577.92 C.M.

(ii) In cement mortar

15 Removing the scraping of old deteriosted plaster of any thickness form

wall/R.C.C. member including strcking of serviceable material and disposal of

unserviceable material from site of work with all lead and lift. Including 18 20.55 S.M.

16 Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level upto floor

two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per 1 4644.08 C.M.

Technical Specification

17 Providing & Applying 20mm.to 35mm Th.(Max. 35mm thickness consider)

Heavy Roller plaster on walls or similar surfaces at all floor levels consisting of

12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand : racron 3s ( 0.5 nos

per bag )) also plaster master wterproofing chemical 100ml /bags as per

companey manual & approved by E.I.C or consultant & 8 mm. th. Finishing coat 102 417.00 S.M.

of C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and apply roller

horizontal as well as vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

18 Providing and applying two coats of weather shield max paint (3 coat may be

required in case of darker colours.) of ICI DULEX or Apex ultima of asian paint

including applying exterior acrylic primer coat as per manufacturers specification

and dirctions in shade and colour approved by architects, on exterior surface of

the building including scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and manufacturers.

Surface Preparation :Surface is throughly clean, dry and free from all loose dirt,

chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing

with a wire / stiff coir brush followed by water jetting if required. Fill up all 205 82.00 S.M.

minor cracks and defects with white cement and sand mixture in the ratio 1:3.

For application on previously painted wall, previous coatings of paint must be

throughly scraped off and Clean the surface throughly using wire brushes.

PRIMING:Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-

5 hours. Application of putty is Not recommended. Minimum 4-6 hours duration

is required between each coat of weather shield max paint.

19 Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing

with necessary barbed wire (12 x 14 guage, weight not less than 0.14 kg. / mt.)

pins, hooks, excluding M.S. angles etc. complete as per relevent IS 15 125.00 K.g.

specification.& directed by engineer in charge

20 Steel work welded in built up sections, framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint

SOR 2024-25 & MR

Description Qty. Unit Amount

(A) in beams & joists channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams,hip & trussed purlins connected to common 2 9108.48 Qtl.

raffers & the like.

21 Applying Priming coat over new steel and other metal surface after over and

including preparing the surface by throughly cleaning oil, grease dirt and other

foreign matter and scoured with brushed fine steel wool, scrapers and sand paper 5 36.74 S.M.

with ready mixed priming paint brushing red lead.

22 Painting two coat (excluding priming coat) on new steel and other metal surface

with synthetic enemal paint, burshing to give an even shade including cleaning 5 68.57 S.M.

the surface of all dirt, dust and other foreign matters.

PART C :- ELECTRICAL WORKS

Part-01 Point wiring in Copper (MODULAR)

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

2 Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade ZHFR PVC insulated multi

strand copper wires, in below type of pipe to be erected complete with earth

continuity and necessary connection with primary light with accessories erected

on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) /

Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

3 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade ZHFR PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

Cat. III 0 670.24 Pt.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Cat. III 3 708.41 Pt.

4 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade ZHFR PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

SOR 2024-25 & MR

Description Qty. Unit Amount

Cat. III 2 535.55 Pt.

5 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade ZHFR PVC insulated multistrand copper wires, in

following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box

covered with appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Cat. III 2 782.65 Pt.

6 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall / 6 270.43 Pt.

ceiling with following type accessories

7 Conduits & Pipes

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following 20 24.24 Mtr.

dia of pipes, in approved manner as directed

8 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes. (1) 20 mm 20 17.17 Mtr.

9 Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having

double-locking arrangement with grooves, trunking of size not below 12.5 mm in

height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm 5 31.31 Mtr.

thick duly sealed in joint & erected on wall / ceiling of following size .(2) 25 mm

10 Mains & Wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 50 62.62 Mtr.

(b) 2 wire 2.5 sq. mm 50 82.82 Mtr.

(C) With oval conduit /PVC casing capping double lock type

(a) 2 wire 1.5 sq. mm 20 56.56 Mtr.

(b) 2 wire 2.5 sq. mm (From LDB to SB and SB to SB ) 30 82.82 Mtr.

11 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (C) with oval conduit /PVC casing capping

double lock type

(a) 2 wire 4 sqmm 10 112.11 Mtr.

(g) 4 wire 4 sq. mm 5 180.79 Mtr.

(b) 2 wire 6 sq. mm 5 147.46 Mtr.

12 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV

grade to be erected as directed of following size.

(E) 3 core 2.5 Sq. mm 50 137.36 Mtr.

Part-02 LT Switchgear, Distribution Boards & LT Panel

SOR 2024-25 & MR

Description Qty. Unit Amount

13 Providing and erecting Sheet Steel powder coated MCB distribution board - flush

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to

be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(ii)6 way 2 885.77 Ea.

(iii)8 way 0 1152.41 Ea.

14 providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic 1 1969.50 Ea.

component. for following Max. rating erected as directed (i) 25 Amps.DP Cat.

15 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI Mark 6 112.11 Ea.

16 Providing & erecting 240 V MCB double pole switch for motor & inductive load

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity

(A) 6 to 32 Amp.

Cat III 2 299.97 Ea.

17 sheets Steel powder coated enclosure suitable for incorporating One/Two nos.

18 Providing and erecting metallic vitrified danger notice board as per language

suggested by engineer incharge for MEDIUM VOLTAGE installation to be 2 69.69 Ea.

erected as per IS-2551.

19 Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. 10 8.08 Ea.

Part-03 Indoor Lighting Item

20 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet 10 373.70 Ea.

21 Supplying and erecting led lamps with following wattage capacity of 220 to

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts 2 112.11 Ea.

SOR 2024-25 & MR

Description Qty. Unit Amount

22 Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(i) above 36 to 48 watts

Cat-lll 2 3345.12 Ea.

Part-04 Fan & Accessories

23 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy & 30 cm. 3 1948.29 Ea.

down rod erected with earthing. (Make shall be approved by Engineer in charge)

24 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star

rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite

magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper winding, Power factor not

< 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum

CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with

remote unit for Speed Control and all remaining accessories including safety pin, 2 2885.57 Ea.

nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to

285 Voltage and rectifier circuit with surge, over current and overload protection

, 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall

be approved by Engineer in Charge] (B) 1200 mm Sweep (48")

25 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

down rod erected duly painted for fan complete with proper insulation without 3 108.07 Mtr.

leckage and earthing.

26 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 3 108.07 Ea.

27 Supplying & erecting single phase approved make industrial exhaust fan suitable

for medium duty ring mounted low noise operation suitable for medium duty

having following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM Cat.II 1 2054.34 Ea.

28 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

Part-05 Earthing System

29 Providing and erecting required size HOT deep Galvanised iron strip for earthing

of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper 5 77.77 Kg.

SOR 2024-25 & MR

Description Qty. Unit Amount

30 Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency.

[A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr 1 5842.85 Ea.

Back filling compound - 1 Nos. of Bag of 15 Kgs.

31 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1 794.87 Kg.

32 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

33 Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade

G.I. pipe with necessary coupling buch buried in specially prepared earth pit &

G.I. earth wire of 8 SWG erected & connected as directed (For panel) 2 823.15 Ea.

34 For using salt and charcoal / coke as required for pipe type earthing. 2 171.70 Ea.

35 Supplying & erecting funnel type earthing having earth plate of following size

burred in specifically prepared earth pit 3 mtr. below ground with 40 kg.

charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe

with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover

complete as per para 7.3 of IS 3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in

mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear

with end socket as per direction & duly tested by earth tester confirming to IS

(As per drawing) with following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 1 2311.89 Ea.

36 ABC TYPE FIRE EXTINGUISHER :-

6KG CAPACITY 1 1896.02 NOS

(MAKE:- SAFEX / KANEX / V-SAFE)

37 CO2 TYPE FIRE EXTINGUISHER :-

4.5KG CAPACITY 1 4740.06 NOS

(MAKE:- SAFEX / KANEX / V-SAFE)

G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING

(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED PAINT),

SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS, BOLTS, NUTS

(GALVANISED), CLAMPS, "U" BOLTS, FITTINGS SUCH AS REDUCERS,

TEES, ELBOWS, FLANGES. INCLUDING CUTTING, WELDING, FIXING

IN/ON WALLS, (MAKE:- ASIAN / JINDAL)

50MM DIA 20 929.11 MTRS

Part-07 Motor, Pumps & Starter

39 Providing & erecting open well type horizontal mono block pump set with

stainless steel body having following specification

SOR 2024-25 & MR

Description Qty. Unit Amount

(C) 1 H.P. single phase open well motor pump set suitable for 185 LPM

discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe with control 0 9613.18 Ea.

40 Providing & erecting open well horizontal mono block pump set with cast iron

body, complete for three phase submersible motor having

[A] For 1.5 HP 3 phase open well horizontal mono block pump set suitable for

190 LPM @ 20 mtr head suitable for 40 mm dia delivery pipe

41 Supplying and erecting Direct On-line Electronics Starter with 2-5/4-10/8-14/10-

16 Amp. Rating relay (variable current setting) directly operated in totally

insulated elegant enclosure and 18 Amp. Rating power relay with start - stop

button for single phase operation up to 3 HP as per complete erected on P.W.

Block with following features. 1 1603.88 Ea.

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

42 Supplying & erecting approved make Automatic liquid level controller 6A.as per

instruction of Engineer in charge on site complete with wiring connection with

existing wires , with copper conductor from pump to upper and lower tank. 1 2355.32 Ea.

43 Supplying & erecting approved make self-priming domestic monoblock water

pump with 1 H.P motor, suitable for operation on 230 volts, 50c/s. AC supply

with metallic flange, and M.S. impeller delivery and following discharge

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia. Delivery Cat.III 1 7679.03 Ea.

44 S.I.T.C. of single phase submersible pump set suitable for 100 mm size or more

dia bore well having motor capacity and discharge as under with necessary panel

box. Lifting and Lowering taken extra.

(a) Motor rating 1 HP (12 stage) pump having capacity of 50 LPM at 43 to

mtr head suitable for 32 mm dia. delivery pipe

Cat.II 0 15595.41 Ea.

45 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of following Size.

(A) 3 Core x 1.5 Sq. mm. 50 65.65 Mtr

Part-08 Water Cooler & Purifier

46 Providing and erecting water cooler having storage capacity 80Ltr. & cooling

capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the

water should drop by 150 C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor, condensing unit, water 1 49559.69 Ea.

tank surrounded by evaporating coil, thermostats, relay etc. complete with

necessary inlet & outlet connection. The body of water cooler will be made from

Stainless Steel.

SITC of Water Purifire Eureka Forbs Make AG 200 or Equivalent 1 10605.00 Ea.

47 Supplying and erecting water filter cum purifier with ultra violate technology.

(Aquaguard / waterdoc model or equivalent symphony/ crystal/videocon model) 1 5424.71 Ea.

Part-09 Other Work

48 Supplying & erecting approved make SMC press moulded composite FRP.

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of following size of

(B) 250mm x 200mm x 100mm [deep] 2 515.10 Ea.

SOR 2024-25 & MR

Description Qty. Unit Amount

49 Providing and erecting street light pole bracket comprising main B Class MS

pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size

pole top having sufficient fasteners for fixing the brackets and having spread of

mtr. length with suitable rise as per site condition & suitable welded stiffener

reducer and nipple with check nut complete painted with one coat of Red oxide /

PU base primer and two coats of Aluminium / PU paint. paint with following nos

[A] Single Arm bracket 1 Mtr 2 561.56 Ea.

50 Supplying and erecting HYLAM sheet on existing angle iron frame.for following

1 771.64 sq.mtr

TOTAL (B) ANGANWADI AT LAL TAMBU,KOSAD VILLAGE

TOTAL BHARTHANA-3 ANGANWADI ,BHARTHANA VILLAGE (PART-A)

TOTAL LAL TAMBU ANGANWADI, KOSAD VILLAGE (PART-B)

EXECUTIVE ENGINEER

NEW EAST (SARTHANA) ZONE

SIGNATURE OF CONTRACTOR SURAT MUNICIPAL CORPORATION