MMGSY

Name of Work :-

Anand, Package No. : AND/MMGSY/SCSP/WD/2025-26/03

For ensuring quality control and workmanship, various tests prescribed below for materials shall be taken at periodical interavals as

stipulated below.

The materials shall be a got tested at Government recognised Laboratory , ( R & B ) or field Laboratory of GERI ( R&B ) for which

% of the estimated amount put to tender shall be recoverd from the contractore from the RA bills and Final bills at the testing charges

shall be paid to the GERI by the Government. However if the charges increse over 1% no excess recovery shall be made from the

contractor as per resolution of B & C Department dated 10th May 1985 Vide TNC/1085 ( 4 ) s. & R & B Department G.R No. SSR -

Item No Brief Decription Qty. Of Prescription Of Test Frequency @ Which Test Total No Of Test

as per Of Materials to Be Materials Which Shall Be shall BE Carriedout To Be Taken

Schedule Tested Carriedout

1 45 to 90 mm M.C.. Metal Cmt Gradation Test 1 to 100 Cmt 1 Test Test

45 to 63 mm H.B. Metal Cmt Impact Value 101 to 500 Cmt 3 Test Test

40 to 63 mm M.C. Metal 1409.65 Cmt Flakiness Index 501 to 1500 Cmt 5 Test 5 Test

25 to 50 mm M.C. Metal Cmt Abrasion Value 1501 to 5000 Cmt 7 Test Test

25 to 40 mm M.C. Metal 1106.33 Cmt Water absorption 5 Test

2 Kapachi 2059.48 Cmt Gradation Test 1 to 100 Cmt 1 Test 7 Test

Grit 1955.31 Cmt Impact Value 101 to 500 Cmt 3 Test 7 Test

Stone Dust 439.60 Cmt Flakiness Index 501 to 1500 Cmt 5 Test 3 Test

Quarry spaul 678.00 Abrasion Value 1501 to 5000 Cmt 7 Test 5 Test

Water absorption

Stripping Value

3 Sand 678.46 Cmt Silt Content One Test Per 150 cmt 5 Test

4 Asphalt 156.65 MT 1 Test

Penetratiopn Test As Per No Of Tanker Test

Above 501 ( 4 +

Ductility Test As Per I.S

Specification Gravity Test As Per I.S

Softening Point Test As Per I.S

Viscosity Test As Per I.S

5 Tack Coat MT Binder Temprature For Irregular close in As per

Application Intervals freq.

Rate Of Spread of Binder Two Tests Per Day

7 Carpet,BM , Sealcoat MT Gradation @ Plant Site One Test Per 100 As per Test

MT Mix & Minimum freq.

Binder Content @ Plant Two

Temprature of Binder in Regular Controll

Boiler, aggregates in the through Checks

Drayer and mix at the time

of laying and rolling

Rate of Spreaded Mix Regular Controll

Materials through Checks on

Layer Thickness

8 Cement 439.80 MT As Per GERI Manual 2002 5 Test

Consistency Up to 50 T 1 Test

Setting Time 100 T 2 Test

Compressive Strength 200 T 3 Test

Fineness 300 T 4 Test

Chemical analysis 500 T 5 Test

Soundness 800 T 6 Test

For Large 8 Test

9 Steel 16.71 MT Tensile Strength 1 Test / 40 Tonnes 1 Test

Yield Stress Per Category Per Category

10 C.C Cube Compressive Strength Qty In CUM Test

51 And Above 4+1

( For each additional

Cum or Part thereof )

* The number of tests will be as per Manual of Quality Controll or Latest Govt. G.R / Circulars will be Final

The Contractor shall have to pay 1% of the estimate cost put to tender towards all testing of materials & the same shall be deducted

from their bills for the works. The testing of varius materials shall be carried out in GERI and result received shall be binding to all i.e.

The Contractor and Govt.

Testing charges of GERI shall be born by the Govt. No refund be made nor extra charges over 1 % shall be recoverable from the

SIGNATURE OF CONTRACTOR Deputy Executive Engineer Executive Engineer

R & B ( Panchayat ) Sub Division R & B ( Panchayat ) Division