Karnataka

Active

Works

Bridges

Construction of a bridge across the Siriya river and development of connecting road to link Kamajalu to Poovanadka in Manil village, Puttur Assembly Constituency, Bantwal taluk, Dakshina Kannada district.

Public Works Department

PWD Division Office Mangaluru | Mangalore, Karnataka

Amount: ₹19.0 CrCloses: 31 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published17 Oct 2026
Pre-Bid Meeting23 Oct 2026
Closes31 Oct 2026
Bid Opening2 Nov 2026

Tender Value

₹19.0 Cr

EMD Value

₹19.0 L

Closing Date

31 Oct 2026, 5:00 pm

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Work Description

Construction of a bridge across the Siriya river and development of connecting road to link Kamajalu to Poovanadka in Manil village, Puttur Assembly Constituency, Bantwal taluk, Dakshina Kannada district.

Tender Information

Tender ID

PWD/2026-27/BG/WORK_INDENT44912

Reference Number

PWD/2026-27/BG/WORK_INDENT44912

Tender Type

Open

Product Category

Bridges

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Mangaluru

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredAttach the last five years profit & loss statement certificate countersigned from a chartered accountant with UDIN Number is to be submitted.

RequiredKPWD Class I Registration Certificate.

RequiredExisting & Ongoing Commitment Statement

RequiredMachineries & Equipment Details

RequiredAssessed Available tender capacity

RequiredWorkdone Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

In the Sanctioned Estimate, the item rates are showing inclusive of all applicable taxes but it is to be noted that rates are exclusive of taxes (GST)

Estimate rates are excluding GST as per Common SR 2023-24 continued to 2026-27, Issue rate WEF from 04.04.2026 and prevailing GST (18% of Amount Put to tender) amount is kept in the form of Lump sum in sanctioned estimate according to guidelines in Common SR 2023-24 (As per the circular from Govt of Karnataka no.12/2024 Bengaluru dt:09.08.2024). Therefore, Amount put to Tender and ECV amounts are excluding GST even though it is showing inclusive Tax in Draft Tender Schedule Process. Hence, GST will be paid separately for the quoted amount accordingly. The bidder has to quote the rate exclusive of GST and to submit a declaration which is duly signed by the bidder along with their tender proposal.

The contractor shall submit the details of technical staff employed by him.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPP-Portal on or before the last date and time of bid submission.

EMD Payments shall be made through e-payment mode only and same shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The cost of the Tender form shall not be refundable.

The employer is not responsible for any delay in accessing Karnataka Public procurement (KPP) portal.

Royalty on construction materials and other applicable taxes will be deducted as per prevailing Government orders.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incidents happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

The item rates quoted shall include cost of royalty charges on construction materials and other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts, labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

Further particulars, if any queries required to the Contractor, they can get from the office of the concerned Executive Engineer, PWD Division, during office hours on all working days.

Contractor should follow strictly the prevailing rules of labour act.

The Tenderer should furnish all necessary original documents mentioned in the bid document to the Executive engineer at the time of verification of documents during Technical Bid evaluation.

The intending bidders are requested to note that they should abide by the instructions and conditions contained in the bid documents and further orders thereon.

Contractor has to upload the valid EPF registration copy.

The successful bidder has to follow the prevailing Government orders regarding Royalty Charges. The Contractor has to submit MDP Certificate along with the running contractor bills. Otherwise Department will take necessary action as per the Government Orders/Circulars.

Increase in GST shall not be paid in the extended period of contract.

As per Karnataka state Government order LD.300.LET.2006 Bangalore dated 01.01.2007 and Government letter no PW.134.BMS.2007 dated 27.07.2007 a sum amounting to 1 Percent of the bill amount will be deducted towards constructions labour welfare fund.

Contractor should take all precautions to ensure that no damage is caused to the existing works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified on his own risk and cost.

Materials like bitumen, steel and cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the Quality Assurance Authority before commencement of the work.

Work shall be carried out according to relevant IS/IRC codes specifications depending on type of work.

The bidder has to establish field laboratory at the work site as per GO No:PWD/243/SEV/2013 Bengaluru dated:22.07.2014.

The Defect Liability period for this work is 2 years

In case of the death of a contractor, after executing the agreement / commencement of the work, his legal heir, is an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work.

KPWD Class I Registration Certificate

The contractor has to quote the same rate to the same items of work that is to be executed at different chainages. If in case, the contractor quotes different rates for the same item appearing at different places of BOQ then, the lowest quoted rate for the same items will be considered for that particular item for evaluation and payment.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of works for which tenders already submitted

Past Experience

Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-2026) (b) satisfactorily completed(at least 90% of contract value), as prime contractor, at least one similar Single Bridge work (i.e., Bridge work comprising of pre-stressed I/Y/T/Box Girders, Pre-cast RCC Girders, Bowstring girder) of value not less than Rs.948.04 LAKHS (usually not less than 50% estimated value of contract)

Others -- Work-done certificate issued from an officer not below the rank of Executive Engineer or equivalent

Section 2 ITT 3.2c To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-2026) c) executed in any one year, the following minimum quantities of work Note Specify the principal items of works to be executed under this contract 1. Earthwork /Embankment- 47233.00 m3, 2. PCC/RCC/RMC - 7864.00 m3, 3.Steel-646.00 Tonne

Others -- Work-done certificate issued from an officer not below the rank of Executive Engineer or equivalent

Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26) d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs.0.00 Lakhs. (usually not less than 50% of the electrical works) in any one year.

Others -- Work-done certificate issued from an officer not below the rank of Executive Engineer or equivalent.

Capabilities of Vendor

Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender:(B) Works for which Tenders already submitted.

Others -- Attach details in prescribed format in 1.5(B) Section

KPWD Class I Registration Certificate

Others -- PWD Registration Certificate (Class I)

Section 2:ITT 3.3-Each Tenderer should demonstrate b. Machineries could be on Lease/Hire/Ownership 1)Hydraulic Excavators 1.20 m3 capacity - 2 No, 2) Motor Grader - 1 No, 3)Mobile Cranes 150 T - 2 Nos,4) Soil Compactors 11-20 T Capacity - 1 No, 5) Concrete batching Plant 30 m3 per hour capacity - 1No, 6) Form Finish shuttering -1000 m2, 7) Water Tanker - 2 No, 8) Transit Mixer 6 m3 capacity - 4 No, 9) Concrete Pump with boom placer 70 m3 Capacity - 1 No, 10) Tippers - 7 No

Others -- RC issued by RTO or Heir/Lease agreement copy, Sale Deed or Purchase Invoice and Insurance Copy

Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender:(A) Existing commitments and on-going works.

Others -- Attach details in prescribed format in 1.5(A) Section-3.

Section 2 ITT 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value amounting of Rs.1896.08 LAKHS. The available tender capacity will be calculated as under Assessed available tender capacity - (AxNx1.5 - B) where A - Maximum value of civil engineering works executed in any one year during the last five years (updated to FY 2026-27price level) taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited. B - Value, at FY 2026-27 price level, of existing commitments and on-going works to be completed during the next 24 Months (period of completion of the works for which Tenders are invited) Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Assessed available tender capacity

Section 2 ITT 3.3 -Each Tenderer should further demonstrate a) Machineries could be on Ownership 1)Hydraulic Excavators 1.20 m3 capacity - 2 No, 2) Soil Compactors 11-20 T Capacity - 1 No, 3) Concrete batching Plant 30 m3 per hour capacity - 1No, 4) Form Finish shuttering -1000 m2 5) Water Tanker - 2 No, 6) Transit Mixer 6 m3 capacity -4 No, 7) Concrete Pump with boom placer 70 m3 Capacity - 1 No, 8) Tippers - 8 No

Others -- RC issued by RTO or Sale Deed or Purchase Invoice and Insurance Copy

Financial Status

Section 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-2026) (a) achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering works only) of Rs 2244.40 LAKHS (usually not less than two times the estimated annual payments under this contract).

Others -- profit and loss statement ,Balance sheets certified from an Registered Chartered Accountant

Section 2 ITT 3.3 - Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of no less than Rs. 568.82Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.

Others -- Bankers certificate in the prescribed format issued by Nationalised Banks as per KW-4

Others

The Contrctors has to quote the same rate to the same items of work that is to be executed at different chainage, if in case, the contractors quotes different rates for the same item appearing at different places of BOQ then,the lowest quoted rate for the same items will be considered for that particular item for evaluation and payment.

Others -- Upload self declaration certificate

Work Locations

Fee & Financial Details

Tender Fee Amount

₹7,500

EMD Fee Amount

₹19.0 L

Important Dates

Last Activity

17 Oct 2026

Published

17 Oct 2026

Bid Opening

2 Nov 2026

Download Ends

23 Oct 2026

Pre-Bid Meeting

23 Oct 2026

BOQ Preview

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Laying Reinforced Cement Concrete Pipe NP4 / Prestressed Concrete Pipe on First Class Bedding in Single Row - Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culv...

•

Bridge Maintenance & Testing - Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and eff...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 ---- Including cost and conveyance of all materials, labour, hire char...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Crash Barrier for Bridges - Provision of an Reinforced cement concrete crash barrier at the bridge deck & approaches to bridge structure, constructed withReinforced cement concrete with ...

•

Footpaths and Separators - Construction of footpath/separator by providing a 150 mm compacted granular sub base as per clause 401 and 25 mm thick cement concrete grade M15, over laid with...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705 ---- Including cost and conveyance of all materials, labour, hire charges of machin...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the fu...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702 ---- Including c...

•

Strip Seal Expansion Joint - Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to b...

•

Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined wit...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2504 ---- Including cost and conveyance of a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Toe protection - A toe wall for toe protection can either be in dry rubble masonry in case of dry rubble pitching or pitching with stones in wire crates or it can be in PCC M15 nominal mix if cement c...

•

Flexible Apron - Construction of flexible apron 1 m thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall. Ref to MoRT&H : IRC - 2507.2 ---- Including cost...

•

Laying Reinforced Cement Concrete Pipe NP4 / Prestressed Concrete Pipe on First Class Bedding in Single Row - Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culv...

•

Cutting of Trees, excluding removal of stumps and roots of trees - Girth from 300 mm to 600 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all materials, labour, hire charges of m...

•

Cutting of Trees, excluding removal of stumps and roots of trees - Girth from 600 mm to 900 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all materials, labour, hire charges of m...

•

Cutting of Trees, excluding removal of stumps and roots of trees - Girth from 900 mm to 1800 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all materials, labour, hire charges of ...

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth from 300 mm to 600 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all mater...

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth from 600 mm to 900 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all mater...

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth from 900 mm to 1800 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all mate...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Dry Lean Cement Concrete Sub-base - Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer ston...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). ...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Reinforced Cement Concrete Crash Barrier - Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-25 grade c...

•

Filler joint - Providing & fixing 2 mm thick corrugated copper plate in expansion joint complete as per drawing & Technical Specification. Ref to MoRT&H : IRC - 2605 --...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Earth work in surface excavation by mechanical means for lowering & leveling

•

the ground without blasting for all works other than foundation in Ordinary/

•

Soft rock & depth not exceeding 300mm as per d...

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...

•

Earth work excavation for Foundation by Mechanical means depth upto 1.50m,

•

as per drawing and technical specifications, including setting out, shoring,

•

strutting, barricading, caution lights, includin...

•

Pavement Quality Concrete using paver - M40 grade Construction of un-reinforced, dowel jointed M40 grade Pavement Quality Concrete Pavement over a prepared sub base in recommended proportions, Coarse ...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

44912 Bid document KW-4.docx

Tender Document • 1.29 MB

Adobe Scan 17 Oct 2026.pdf

Others - PERT CHART • 0.51 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Bridges

Construction of a bridge across the Siriya river and development of connecting road to link Kamajalu to Poovanadka in Manil village, Puttur Assembly Constituency, Bantwal taluk, Dakshina Kannada district.

Public Works Department

PWD Division Office Mangaluru | Mangalore, Karnataka

Amount: ₹19.0 CrCloses: 31 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published17 Oct 2026
Pre-Bid Meeting23 Oct 2026
Closes31 Oct 2026
Bid Opening2 Nov 2026