LAYING OF HT CABLES FROM THERMAL SUBSTATION TO PHASE II ROAD NEAR KEIL AT FACT CD.

LAYING OF HT CABLES FROM THERMAL SUBSTATION TO PHASE II ROAD NEAR KEIL AT FACT CD.

Providing new cable trench and laying of 2Nos,11kV, XLPE insulated power cables in the trench. The scope shall include excavation of cable trenches for a depth of 1 meter and a minimum width of 300mm, laying of cables ( 2R,3C x 400 sqmm ) and backfilling of trenches after cable laying . The cable will be supplied by the FACT LTD free of cost at main store. The scope include shoring, strutting, road cutting & dewatering if required, consolidating and disposing of surplus earth, concreting the road cutting, all labour, materials, tools etc. complete as per the directions of Engineer in Charge. The scope also includes supply and spreading /filling of sand in cable trenches, supply and installation of well burnt bricks of 50mm thickness for cable protection inside cable trenches after laying the cables/ installation of HDPE pipe (supplied as per item No.5 of the schedule) wherever required as per the direction of Engineer-in-charge. The bricks shall be laid to enclose the sides of sand bed and cable. Supply and installation of Stainless steel identification tags on cables in every 15mtrs length, supply and installation of Survey stone as Cable route markers ( size 15 x 15 x 60cm) above the cable trench in every 15 meters . The stone shall be painted with 2 coat floor gaurd exterior paint. The rates quoted shall be for the length of trench and not for the length of cables.

Laying of 2Nos,11 KV, 3C, 400Sq.mm XLPE/PVC insulated power cable through existing concrete trenches/hume pipes. The scope shall includes trench opeing, laying, dressing, fixing on cable trays /racks /risers /wall/columns /cable trenches /pipes, clamping, tagging, tying, drilling holes, minor civil work etc. The scope includes supply and installation of Stainless steel identification tags on cables in every 15mtrs length. The rate quoted shall be for the length of trench/hume pipe and not for the length of cables. All materials required for clamping and laying such as aluminium clamps/nylon ropes, bolts, nuts, washers, cable tags, etc shall be supplied by the contractor.

Laying of 2Nos,11 KV, 3C, 400Sq.mm XLPE/PVC insulated power cable through existing cable trays /racks /risers, clamping, tagging, tying, drilling holes, minor civil work etc. The scope includes supply and installation of Stainless steel identification tags on cables in every 15mtrs length. The rate quoted shall be for the length of cable tray and not for the length of cables. All materials required for clamping and laying such as aluminium clamp, bolts, nuts, washers, cable tags, etc shall be supplied by the contractor.

Cleaning the mouth & inside of hume pipe and prepare it for laying/pulling the cable/HDPE pipe.

Supply of HDPE pipe, SDR 33 of size 110 mm

Laying of HDPE pipe. The scope includes laying of HDPE spare pipes through hume pipe & road crossing area. The scope also includes excavation of earth (road crossing ) for a depth of 1mtr and refilling the same after laying HDPE pipe, supply and installation of end caps ( both side) for the pipes etc.

PEEJESS ELECTRICALS (BID ID -3243145)

LAMOS TECHNOLOGY SOLUTIONS PVT LTD (BID ID -3243018)

VIJAYAN K K (BID ID -3242832)

VIKRAMAN NAIR S (BID ID -3242096)