Supply of OP wks stores

Alpha Fence Supply of High Security Weld Mesh Panels as per below spec. Mesh Wire : Horizontal wire, Dia 4.0 mm (+/- 0.05mm) : Vertical wire, Dia 4.0 mm (+/-0.05mm) Mesh Size: Mesh Size of 12.7 X 76.2 mm along Mesh ( Mesh Wire: IS 280 2006). Panel size &Weight : 2600X800mm : 20.52 Kg, Coating : Zinc coated 40-50GSM &60 to 80 microns of Powder coating Color: RAL 6005. Powder coating should withstand 1000 Hours of salt spray test. Wire Tensile Strength: Min 550 N/Sq.mm. Weld tensile strength: Min 70 % of Wire tensile strength. Note: High Security Weldmesh is been installed at the bottom.. Ref Drawing No :NC/LC/A8/V2.2. Material: MS Mesh Wire: Dia:4mm: IS 280 2006 Coating :IS 4826 – 1979 Weld Mesh as per : EN 10223-7

Rampur/ Boniyar

Alpha Fence Supply of Weld Mesh Panels as per below spec. Mesh Wire :Horizontal wire, Dia 5.0 mm (+/- 0.05mm) : Vertical wire, Dia 4.5 mm (+/-0.05mm)Mesh Size: Mesh Size of 50 x 100 mm - V Bend &50X200 mm (+/- 2 mm) along Mesh ( Mesh Wire: IS 280 2006). Panel size &Weight : 2600X800 : 9.3 Kg, Coating : Zinc coated 40-50GSM &60 to 80 microns of Powder coating. Color:RAL 6005. Powder coating should withstand 1000 Hours of salt spray test. Wire Tensile Strength:Min 550 N/Sq.mm. Weld tensile strength:Min 70% of Wire tensile strength. Note: Weldmesh is installed vertically above the High Security Weldmesh Ref Drawing No :NC/LC/A8/V2.2. Material: MS Mesh Wire: Dia:4mm: IS 280 2006 Coating :IS 4826 – 1979 Weld Mesh as per : EN 10223-7

Rampur/ Boniyar

Bravo Fence Supply of Weld Mesh Panels: Mesh Wire : Horizontal wire, Dia 5.0 mm (+/- 0.05mm) : Vertical wire, Dia 4.5 mm (+/-0.05mm) Mesh Size : Mesh Size of 50 x 100 mm - V Bend &50X200 mm (+/- 2 mm) along Mesh as per dwg. ( Mesh Wire: IS 280 2006). Panel size (W &H) &Weight ( Tol +/-5%) 2600X1000mm : 11.02 Kg, Coating :Zinc coated 40-50 GSM&60 to 80 microns of Powder coating Color: RAL 6005. Powder coating should withstand 1000 Hours of salt spray test. Wire Tensile Strength: Min 550 N/Sq.mm. Weld tensile strength: Min 70 % of Wire tensile strength. Ref Drawing No : NC/LC/A8/V2.2. Mesh Wire: IS 280 2006 Coating :IS 4826 – 1979 Material: MS Material Weld Mesh as per : EN 10223-7

Rampur/ Boniyar

Fence Post : Type : Circular Hollow section Dimensions : 89mm,Dia, 3 mm (3mm +/- 0.3mm) Thickness: All tolerances as per IS specn IS: 1239 Length : 3.4 mtrs (2.7 mtrs above ground level + 0.7 mtrs under the ground level). Weight: 21.6 Kg (+/-5 %) Coating : Hot Dip glvanised to minimum 350 GSM Hot Dip Galavanising as per IS 2629 / IS 4759 /ASTM A 123 Ref Drawing No :NC/LC/A6/V2.2. Fence Post- IS: 1239 Material: MS Steel Tube

Rampur/ Boniyar

Truss support Post with Rail end Cap : Type : Circular Hollow section. Dimensions :76mm Dia, 3 mm (3mm +/- 0.3mm). Rail End Cap Fitting -76 mm (Rail End Cap is fitted to Truss Support using M8X100 Nut and Bolt Mechanism). Thickness: All tolerances as per IS specn IS:1239. Length &Weight. 1. Truss support for across the slope condition. Length :1800mm, Weight : 9.65 Kg (+5%). Coating : Hot Dip galvanised to minimum 350 GSM. Hot Dip Galavanising as per IS 2629 / IS 4759 /ASTM A 123.

Rampur/ Boniyar

Truss support Post with Rail end Cap : Type : Circular Hollow section. Dimensions :76mm Dia, 3 mm (3mm +/- 0.3mm). Rail End Cap Fitting -76 mm (Rail End Cap is fitted to Truss Support using M8X100 Nut and Bolt Mechanism). Thickness: All tolerances as per IS specn IS:1239. Length &Weight. 1. Truss support for along the slope condition. Length:3100mm, Weight : 16.6 Kg (+/-5%).. Coating : Hot Dip galvanised to minimum 350 GSM. Hot Dip Galavanising as per IS 2629 / IS 4759 /ASTM A 123. Ref Drawing No:NC/LC/A1/V2.2. Fence Post- IS: 1239. Coating - as per IS 2629 / IS 4759 /ASTM A 123. Material: MS Steel Tube Tangdhar Nos 640

Rampur/ Boniyar

Straining Y-Arm for supporting top PTCC: Material : CHS of 76mm and 3.2mm guage as per IS 1852. Coating : Hot dip galvanized to Min 350 GSM as per IS 4759/2629, Length of 1 Arm is 510 mm,outer dia of 76 mm of sleeve cap will be fitted on the top of the fence post and fixed with two Nos mushroom head bolt and nut (M8x25mm). Straining Y-Arm will manufactured as per drawing attached. Straining Y Arm will be installed at every 30 mtrs except intermediate arm post.

Rampur/ Boniyar

Intermediate Y-Arm for supporting top PTCC: Material: CHS of 48.3mm and 2.90mm guage as per IS 1852 Coating :Hot dip galvanized to Min 350 GSM as per IS 4759 / IS 2629.Length of 1 Arm is 510 MM , Angle between the two arms is 120 degree , fixed with two Nos mushroom head bolt and nut (M8x25mm).Intermediate Y-Arm will manufactured as per drawing attached. Outer dia of 76 mm of sleeve cap will be fitted on the top of the fence post. One Intermediate Y Arm will be installed at every post except the posts with Straining Y arms

Rampur/ Boniyar

Razor Running tape: Blade profile : Tear Blade Core wire : 2.5 mm wire Dia +0.1mm, Length of each Coil : 95 Mtrs Weight of each coil : 9.2 Kg. Ref Drawing No : NC/LC/A2/V2.2. Specn for Steel Strip: IS 1730 Specn for wire: IS 280 2006

Rampur/ Boniyar

Fence Post : Type : Circular Hollow section Dimensions : 76mm Dia, 3 mm (3mm +/- 0.3mm) thickness: All tolerances as per IS specn IS:1239 Length : 2.8mtrs (2.1 mtrs above ground level + 0.7 mtrs under the ground level). Weight : 15.02 Kg (+/-5%) Coating :Hot Dip galvanised to minimum 350 GSM Hot Dip Galavanising as per IS 2629 / IS 4759 /ASTM A 123. Ref Drawing No : NC/LC/A1/V2.2. Fence Post- IS: 1239. Coating - as per IS 2629 / IS 4759 /ASTM A 123 Material: MS Steel Tube

Rampur/ Boniyar

Alpha Fence (Per 1 KM) : Details of fence componets accessories, Technical Specification and Qty attached as per Annexure - I of Part II of RFP

Rampur/ Boniyar

Bravo Fence (Per 1 KM) : Details of fence componets accessories, Technical Specification and Qty attached as per Annexure - II of Part II of RFP,

Rampur/ Boniyar

M/S LONE BUILDERS AND SUPPLIERS

M/S J K ENGINEERING WORKS

UNIVERSAL FABRICATORS

M/S MIRI PIRI ENGINEERS and MANUFACTURERS

GURUKRUPA WIRE NETTING INDUSTRIES

V.K.ENTERPRISES