8119/SAR-36/E8 REPAIR / PAINTINGS AND POLISHING TO CERTAIN STEEL /WOODEN FURNITURE ITEMS AT 1AFSB DEHRADUN UNDER GE (AF) SARSAWA

Amount

Chair Varandah (FD-333,19,256) Recanning of Chair Varandah mat pattern with 4 to 5 mm wide 0.5 mm thick half round new plastic cane cream/white colour complete all as specified and shown in drawing.

M&L for welding of broken frame of chair verandah as and where required as specified and directed by Engr-in-charge

M & L for Painting of Chair Varandah with two coats of white synthetic enamel paint after preparing of surfaces by scraping with adhsive cloth of Chair Varandah complete all as specified in drg and directed by Engr-in-Charge

Removing of old u/s missing hard PVC shoes to chair verandah and S&F new PVC hard shoes.

Table Office Officer steel :Removing old u/s top of table office officer steel and S&F of new top of Pre laminated particle board 18 mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified and directed by Engr-in-Charge .

Taking out U/S drawer of table office officer steel and S&F new drawer made of 1mm thick PBI sheet ,rest all as per drg and directed by Engr –in-charge (Table Office Officer steel)

Removing U\S / damaged legs and S & F New leg made of PBI sheet 1.6mm thick 25mm sqre conduit pipe and painted with synthetic enameled paint OG rest all as per drg and directed by Engr-in-Charge (Table Office Officer steel)

Removing of existing paint by scraping with abrasive cloth and painting two coats of OG synthetic enamel paint on steel surface and preparation of surface complete all as shown on drg and all as directed by Engr-in-Charge (Table Office Officer steel)

Removing of U/S PVC Shoes of Table office officer Steel and S&F of new PVC shoes of the same shape and size Rest all as per drg and directed by Engr-in-Charge (Table Office Officer steel)

Table office Clk steel-(FD-1004) Removing old u/s top of table office clk steel and S&F of new top of Pre laminated particle board 18 mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified and directed Engr-in-Charge.

Taking out U/S drawer of table office clk steel and S&F new drawer made of 1mm thick PBI sheet ,rest all as per drg and directed by Engr –in-charge..

Removing U\S damaged legs and S & F New leg made of PBI sheet 1.6mm thick 25mm sqre conduit pipe and painted with synthetic enameled paint OG rest all as per drg and directed by Engr-in-Charge (Table office Clk steel-(FD-1004).

Removing of existing paint by scraping with abrasive cloth and painting two coats of OG synthetic enamel paint on steel surface and preparation of surface complete all as shown on drg and all as directed by Engr-in-Charge (Table office Clk steel-(FD-1004)

Removing of U/S PVC Shoes of Table office clk Steel and S&F of new PVC shoes of the same shape and size Rest all as per drg and directed by Engr-in-Charge (Table office Clk steel-(FD-1004)

Table Steel 3'x3' (FD-1009) Taking out old U/S existing top from Table Steel 3'x3' and S&F of new top made of 18 mm thick Pre Laminated particle board exterior grade with 4mm thick teak wood beading around the top complete all as specified and directed by Engr-in-Charge.

M & L for welding of Broken frame steel of Table 3'x3'Steel as specified in drg and as directed by Engr-in-Charge.Table Steel 3'x3' (FD-1009).

S & F of 25 mm Sq ms tube 1.6 mm thick 1100 mm long cross stiffener to table steel 3'x3', 8” (inch) below from top frame by welding Rest all as directed by Engr-in-Charge. Table Steel 3'x3' (FD-1009)

Removing of existing paint by scraping with abrasive cloth and painting two coats of OG synthetic enamel paint on steel surface and preparation of surface complete all as shown on drg and all as directed by Engr-in-Charge Table Steel 3'x3' (FD-1009).

Removing of U/S PVC Shoes of Table Steel3'x3' and S&F of new PVC shoes of the same shape and size Rest all as per drg and directed by Engr-in-ChargeTable Steel 3'x3' (FD-1009).

(Chair CB Steel with Arms (FD-75)S&F new seats of new teak wood duly Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CBA steel with arms after removing existing damage/broken seat all as specified and as shown on drg .

S&F new back of new teak wood duly Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CBA steel with arms after removing existing damage/broken back all as specified and as shown on drg.(Chair CB Steel with Arms (FD-75).

S&F new two Nos flate iron size 20x5x 480 mm long to be fixed both leg by welded in below the seat of chair CB steel both front and rear duly two nos hole in each iron flate for screwing seat to the flat duly black /OG painted over a coat of red oxide steel primer rest all as directed by Engr-in-Charge (Chair CB Steel with Arms (FD-75).

Removing of old existing U/S cap and S&F new PVC cap for chair steel tubler with arms. (Chair CB Steel with Arms (FD-75)

Removing of U/S shoe and S&F new hard rubber shoes to chair steel tubler with arms with appropriate steel screw all as directed by Engr-in-Charge (Chair CB Steel with Arms (FD-75)

Removing of old U/S arms and S&F new arms seasoned sheesham wood with steel screw appropriate size complete of Chair CB steel with Arms as specified and shown on drg all as directed by Engr-in-Charge (Chair CB Steel with Arms (FD-75)

Removing of existing paint by scraping with abrasive cloth and painting two coats of OG synthetic enamel paint on steel surface and preparation of surface complete all as shown on drg and all as directed by Engr-in-Charge. (Chair CB Steel with Arms(FD-75)

Teapoy Varandah (FD-255) Taking out old U/S top of teapoy varandah and repairing the entire frame including welding if required and painting two coats of white enamel paint after preparation of surface as specified in drg and directed by Engr-in-Charge

S&F new top of prelaminated particle board 18 mm thick exterior grade with 4 mm thick teak wood beading around the top, complete all as shown in drg and directed by Engr-in-Charge (Teapoy Varandah (FD-255)

Almira large steel/Med steel with shelves &1/2h &1/2s large steel /med steel (FD-1031, FD-1032 ,FD-1033 , FD1034,FD-114) Taking out existing unserviceable locks almirah large/medium steel and S&F of new locks of six leavers of existing shape & size with duplicate keys of Make : Godrej /Harrison complete all as specified and directed.

Taking out broken/damaged handle of steel almirah large and S&F of new handle of mild steel chromium plated of existing shape complete all as specified and directed.

Taking down existing unserviceable shelves of almirah large steel and S&F of new shelves made of 1mm thick mild steel of existing shape and size complete all as specified on drawing and directed.

All as per item 7.2 here in before but shelves of almirah medium steel

Taking out old unserviceable door hinges from almirah large/medium steel and S&F of new doorhinges mild steel 75/80 mm long complete all as specified and directed.

Taking down unserviceable cover locks from almirah large/medium steel and S&F of new cover locks made of 1mm thick mild steel of existing shape and size complete all as specified on drawing and directed.

Taking down unserviceable locking device & rod set from almirah large steel and S&F of new locking device & rod set of existing shape and size complete all as specified on drawing and directed.

All as per item 7.6 here in before but locking device & rod set of almirah medium steel

Dismantling of unserviceable legs of almirah large steel and S&F of new made of 1mm thick mild steel sheet of existing shape and size complete all as specified on drawing and directed.

All as per item 7.8 here in before but legs of almirah medium steel.

Locker Steel : (FD-1029,257) Removal of following existing unserviceable components of Locker Steel or similar MES pattern or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, welding, glueing,providing hinges, placing every part in-tact and polishing/painting the disturbed portion, as applicable as per drgs or as directed by Engr in Charge. Handle

Hasp & Staple for Locker Steel : (FD-1029,257).

Shelf for Locker Steel : (FD-1029,257).

CP Hanging rod 19mm dia for Locker Steel : (FD-1029,257).

Painting:- M&L for preparation of old painting steel surfaces of any descripting exceeding 10cm width on girth like almirah steel, cabinet filling, book case steel, rack steel, table office officer/clerk steel, table 3'X2' & 3'X2' & 3'x3',etc.by cleaning with abrasive cloth, removing dirt, denting deparession if any, applying putty for smooth surfaces for painting and applying a coat of olive green / grey synthetic enamel paint on both side for glossy finish inside and outside complete all as specified and as directed at site.

Chair computer (TP) :Taking out old UNSV seat and S&F New seat as per Drawing

Taking out old UNSV back and S& F New back as per Drawing (Chair computer (TP).

Taking out old UNSV Arms and S&F New Arms as per Drawing (Chair computer (TP).

Taking out old UNSV Hydrolic system and S&F New hydrolic system as per Drawing (Chair computer (TP)..

Taking out old UNSV Coaster wheel and S&F New coaster wheel as per Drawing (Chair computer (TP).

Chair revolving executive (TP) : Taking out old UNSV seat and S&F New seat as per Drawing.

Taking out old UNSV back and S& F New back as per Drawing (Chair revolving executive (TP).

Taking out old UNSV Arms and S&F New Arms as per Drawing. Chair revolving executive (TP)

Taking out old UNSV Coaster wheel and S&F New coaster wheel as per Drawing (Chair revolving executive (TP)

Taking out old UNSV Hydrolic system and S&F New hydrolic system as per Drawing (Chair revolving executive (TP).

Chair visitor (TP) :- Taking out old UNSV seat and S&F New seat as per Drawing.

Taking out old UNSV back and S& F New back as per Drawing for Chair visitor (TP)

Taking out old UNSV Arms and S&F New Arms as per Drawing for Chair visitor (TP)

Charpoy GI Pipe (FD-220) : Removing of old unserviceable elbow from charpoy GI pipe and S&F new GI three way elbow 32mm dia med grade ISI marked to charpoy GI pipe complete all as specified and directed.

Removing of old unserviceable check nut from charpoy GI pipe and S&F new GI check nut 32 mm dia 10mm thick to long/ short rail of charpoy GI pipe complete all as specified and directed for Charpoy GI Pipe (FD-220).

S&F in replacement of U/S long rail of charpoy GI Pipe 32mm dia medium grade heavy duty threaded on both side all as specified and shown on drg and as directed by Engr-in-Charge for Charpoy GI Pipe (FD-220).

Cutting of dismantled old long rail of charpoy GI Pipe 32mm dia modifying into short rail by threaded both ends and ends fixing the same to charpoy GI pipe all as pecified and as directed by the Engr-in-Charge for Charpoy GI Pipe (FD-220).

Cutting of dismantled old short rail of charpoy GI Pipe 32mm dia and modifying into legs by threading of ends and M&L for welding the clamps for FMN set and fixing the same to charpoy GI pipe all as specified and as directed by the Engr-in-Charges for Charpoy GI Pipe (FD-220).

Removing of old U/S Existing ply wood top from GI charpoy and S & F of new top 12 mm thick ply wood commercial face BWR Grade IS-303 of same shape and size rest all as per Drg and as Directed by Engr-in-Charge for Charpoy GI Pipe (FD-220).

S&F new four Nos Iran flate size 25x6x220mm long to be fixed by welded in each corner of charpoy with long rail & short rail duly one hole in each iron flate duly black painted over a coat of red oxide steel primer for fixing by 6 mm dia 1 ½” long bolt of flat head with nut and washer directed by Engr-in-Charge for Charpoy GI Pipe (FD-220).

S&F new three Nos flate Iran size 25x6x850mm long to be fixed by welded in long rail in equal distance of charpoy duly two Nos holes in each iron flate duly black painted over a coat of red oxide steel primer for fixing of ply by 6 mm dia 1 ½” long bolt of flat head with nut and directed by Engr-in-Charge for Charpoy GI Pipe (FD-220).

Removing of damaged/unsv nynol newar from GI charpoy S&F new ply wood 12mm thick commerciel face BWR greade IS-303 on top of charpoy GI pipe size 1980x900mm ISI Marked and directed by Engr-in-Charge for Charpoy GI Pipe (FD-220).

Table Dinning ORs FD-165(M):-Welding to fram of table dinning ORs and smoothing the welded paints, scratching the old paint by scraper and painting with two coats of Black enamelded paint over a coat of primer all as specified.

Taking out old U/S top of Table dining OR and S&F new top of prelaminated particle board 18 mm thick exterior grade with 4 mm thick teak wood beading around the top, complete all as shown in drg and directed by Engr-in-Charge for Table Dinning ORs FD-165(M) .

S&F of new Rubber shoes to be table Dinning Ors all as specified on drg

Removing of existing paint by scraping with abrasive cloth and painting two coats of Black synthetic enamel paint on steel surface and preparation of surface complete all as shown on drg and all as directed by Engr-in-Charge

Book case steel with glass(FD-90M, 1028) :- Taking out old UNSV handle and S&F New handle including nut and volt with washer complete as per existing shape and size as per Drawing.

Taking out old UNSV/ rusted shelves and S&F New shelves dully painted complete as per existing shape and size as per Drawing for Book case steel with glass(FD-90M, 1028).

Taking out old UNSV/ broken glass pan and S&F New glass pan complete as per existing shape and size as per Drawing for Book case steel with glass(FD-90M, 1028) (FD-90M, 1028).

Taking out old UNSV lock and S&F New lock with duplicate key complete as per existing shape and size as per Drawing for Book case steel with glass (FD-90M, 1028).

Chair writing (FD-280 FD-202 FD-261 FD-148):- Replacement of the following old damaged/ decayed parts of chair writing with new parts made of second class hard wood Teak complet all as specified and shown on drg. Front leg

S&F rear legs for Chair writing (FD-280 FD-202 FD-261 FD-148).

S&F right or front or rear or Left rails of Seats with canning holes for Chair writing (FD-280 FD-202 FD-261 FD-148).

S&F stiffener for Chair writing (FD-280 FD-202 FD-261 FD-148).

S&F Top Rails for Chair writing (FD-280 FD-202 FD-261 FD-148).

S&F Arms for Chair writing (FD-280 FD-202 FD-261 FD-148).

Chair dinning (FD-279 FD- 270 FD-262):- Replacement of the following old damaged/ decauyed parts of chair dining with new parts made of second class hard wood Teak complet all as specified and shown on drg. S & F front leg

S&F rear leg for Chair dinning (FD-279 FD- 270 FD-262).

S&F Front, Rear, Side rails of seat with canning Holes for Chair dinning (FD-279 FD- 270 FD-262).

S&F stiffener

S&F Back Rest stiffener

Chair Easy (FD-229)- Replacement of the following old damaged/ decayed parts of chair Easy with new parts made of second class hard wood Teak complete all as specified and shown on drg. S & F front leg

S&F rear leg for Chair Easy (FD-229)

S&F Arms for Chair Easy (FD-229)

S&F Front, Rear, Side rails of seat with canning Holes for Chair Easy (FD-229)

Sofa set 5 seated /sofaset 4 seated /sofa set 3 seater (FD-281) :- Taking out old U/s Broken front leg from Sofa set 5 Seated, sofaset 4 seated and sofa set 3 seater and S & F New leg to be made of second class hard wood Teak same shape and size as specified and directed by Engr –in-Charge

All as per Item No. 19 above but rear leg for Sofa set 5 seated /sofaset 4 seated /sofa set 3 seater (FD-281).

All as per Item No.19 above but Arms for Sofa set 5 seated /sofaset 4 seated /sofa set 3 seater (FD-281).

All as per Item No. 19 above but Batten for Sofa set 5 seated /sofaset 4 seated /sofa set 3 seater (FD-281).

Replacing of existing old cushion foam size 22”x21”x4” from seat and back of Sofa set and S and F of new cushion foam 22”x21”x4” (U Foam) 32 density of sleep well OR Godrej PURITO or ,kurlon or equivalent superior quality & covered with cloth tapestry as per sample approved by GE (Cost of tapestry cloth not less than Rs 300/- per meters) all as specified and directed by Engr-in-Charge for Sofa set 5 seated /sofaset 4 seated /sofa set 3 seater (FD-281)..

BED PLY WOOD TOP FD-246):-Removing of old U/S Existing ply wood top from Bed Ply Wood Top and S & F of new top 12 mm thick ply wood commercial face BWR Grade IS-303 of same shape and size rest all as per Drg and as Directed by Engr-in-Charge.

Dismantling of old U/S teak face ply wood 4 mm thick from Head Board and S & F new 4 mm thick one side teak face on both side of Head Board with 4 mm thick teak wood beading around the head board after repairing the complete head board. Rest all as per drg and as directed by Engr-in-Charge for BED PLY WOOD TOP FD-246).

All as per item No.20.10 above But Foot board for BED PLY WOOD TOP FD-246).

Removing of old U/S Leg of Bed Ply Wood top and S & F of new Leg made of second class hard wood Teak to the same shape and size and as specified in drg and as directed by Engr-in-Charge for BED PLY WOOD TOP FD-246)..

Removing of old U/S long Rail of Bed Ply Wood top and S & F of new Long rail made of well of second class harwood Teak of same size and shape as per drg and as directed by Engr-in-Charge for BED PLY WOOD TOP FD-246).

TABLE BED SIDE (FD-276): Taking out old U/S components of table bed side as and where required from table bed side and S&F new components of existing shape and size all as specified on drawing and directed with following components. Removing of the old U/S sides from Table Bed Side and Supply and Fixing New sides made of 8mm thick prelaminated particle board exterior grade, one side decorative Rest all as specified in the drg and as directed by Engr in Charge

Removing of the old broken /Unserviceable top from Table Bed Side and Supply and Fixing New top made out of 18mm thick prelaminated particle board exterior grade on top for TABLE BED SIDE (FD-276).

Removing of the old broken /Unserviceable bottom from Table Bed Side and Supply and Fixing New bottom made out of 18mm thick veneered teak wood particle board, exterior grade for TABLE BED SIDE (FD-276).

Removing of the old broken /Unserviceable shelves from Table Bed Side and Supply and Fixing New shelves made out of 12mm thick veneered teak face particle board, exterior grade for TABLE BED SIDE (FD-276).

Removing of the old broken /Unserviceable back ply from Table Bed Side and Supply and Fixing New back ply 6mm thick plywood, BWR grade, commercial type for TABLE BED SIDE (FD-276).

Table dressing ladies (FD-251):Taking out old U/S component of table dressing ladies as and where required and S&F of new components of existing shape and size as specified on drawing and directed with following components. New top made of 18mm thick prelaminated particle board exterior grade, one side decorative Rest all as specified in the drg and as directed by Engr in Charge

New 5 mm thick mirror of Make : Atul/Modigaurd & 6mm thick plywood commercial type at back for Table dressing ladies for Table dressing ladies (FD-251).

New drawer with front of 18mm thick prelaminated particle board, exterior grade, one side decorative and other sides of 12mm thick teak wood planks and bottom with 6mm thick plywood commercial grade Rest all as specified in the drg and as directed by Engr in Charge for Table dressing ladies (FD-251)..

Removing of U/S knob and S&F new knob best quality as per drg and directed by Engr-in-charge for Table dressing ladies (FD-251).

M&L for removing UNSV Glass sliding shutter with aluminium channel from table and S&F new Glass shutter made out of 4mm thick glass plain with aluminium channel 20 mm width. Rest all as specified in the drg and as directed by Engr in Charge for Table dressing ladies (FD-251).

TABLE DRESSING GENTS (FD-230)- Taking out old U/S component of table dressing gents as and where required and S&F of new components of existing shape and size all as specified on drawing and directed with following components:- New 4mm thick mirror of Make : Atul/Modigaurd & 6mm thick plywood commercial type at back .

New drawer with front of 18mm thick prelaminated particle board, exterior grade, one side decorative of other sides of 12mm thick teak wood planks and bottom with 6mm thick plywood commercial grade for TABLE DRESSING GENTS (FD-230).

New top made of 18mm thick prelaminated particle board exterior grade, one side decorative with 3mm thick teak wood beading all around for TABLE DRESSING GENTS (FD-230)..

Removing of U/S knob and S&F new knob best quality as per drg and directed by Engr-in-charge .(TABLE DRESSING GENTS -FD-230)

TABLE CENTRE- (FD-375) Taking out old U/S top of table centre and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge .

Taking out old U/S legs of table centre and S&F new legs of second class hardwood Teak of existing shape and size all as specified shown on drg and directed by Engr-in-Charge for TABLE CENTRE- (FD-375).

All as per item No.24.10 here in before but short rail for TABLE CENTRE- (FD-375).

All as per item No 24.10 here in before but long rail for TABLE CENTRE- (FD-375).

Table 3'x2' with and w/o drawer (FD-283 & 284)Taking out old U/S top of table 3'x2' and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out old U/S legs of table 3'x2' and S&F new legs of second class hard wood Teak of existing shape and size all as specified shown on drg and directed by Engr-in-Charge Table 3'x2' with and w/o drawer (FD-283 & 284).

All as per item No 25.10 here in before but short rail Table 3'x2' with and w/o drawer (FD-283 & 284).

All as per item No25.10 here in before but long rail Table 3'x2' with and w/o drawer (FD-283 & 284).

Taking out old damaged/decayed drawer from its position and S & F new drawer as per existing shape & size made out of well seasoned teak wood and 6mm thick plywood consisting 3 Nos of ply on the bottom of the drawer complete all as specified & shown on drgs Table 3'x2' with and w/o drawer (FD-283 & 284).

All as per item No 25.10 here in before but stiffener Table 3'x2' with and w/o drawer (FD-283 & 284).

Removing of U/S knob and S&F new knob best quality as per directed by Engr-in-charge .(FD-283 & 284)

Table peg (FD-277):- Removing of the old U/S top from Table peg and S and F New Top of table peg made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polished all round the top,including tightening of frame with bamboo pins,screw wood ss before fixing of Top. Complete all as shown in drg and directed by Engr-in-Charge Table 3'x2' with and w/o drawer.

Taking out old U/S legs of table peg and S&F new legs of second class hard wood Teak of existing shape and size all as specified shown on drg and directed by Engr-in-Charge for Table peg (FD-277).

All as per item No 26.10 here in before but side rail for Table peg (FD-277).

All as per item No 26.10 here in before but stiffener for Table peg (FD-277).

Table Writing (FD-249):- Removing of the old U/S top from Table writing and S and F New Top of table Writing made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polished all round the top,including tightening of frame with bamboo pins,screw wood ss before fixing of Top. Complete all as shown in drg and directed by Engr-in-Charge.

Taking out old U/S door of cup boards table writing and S&F new door made of 18mm thick prelaminated particle board exterior grade one side teak face and CP piano hinges compete all as shown in drg for Table Writing (FD-249).

Taking out old U/S Stiffener table writing and S&F new Stiffener made second class hard wood Teak as per drawing and directed by Engr-in-charge for Table Writing (FD-249).

Taking out old U/S drawer and S&F new drawer of 18mm thick prelaminated particle board exterior grade one side decorative with 6mm thick plywood commercial grade complete all as shown in drg and directed by Engr-in-Charge for Table Writing (FD-249).

Removing of U/S knob and S&F new knob best quality as per directed by Engr-in-charge for Table Writing (FD-249).

Teapoy (FD-284)– Removing of the old U/S top from Teapoy and S and F New Top of teapoy made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polished all round the top,including tightening of frame with bamboo pins,screw wood ss before fixing of top. Complete all as shown in drg and directed by Engr-in-Charge.

Taking out old U/S leg of teapoy and S&F new leg to be made second class hard wood Teak for Teapoy (FD-284).

Chair all type - Recanning of chairs CBA/CBB wooden chair, bin soiled linen, chair easy, chair dinning, chair writing etc with 2mm wide new plastic cane and 0.4mm thick cream/white half round seat and back and border to be covered with 3 to 4 mm wide ½ round cane and tightening of frame before caning complete all as specified and shown in drawing.

Table computer (FD--28,27,& FD-33 & TP): Repair of the following old broken/Unserviceable parts from table computer and S and F new parts .as per drg and as directed by Engineer-in-charge. Taking out old U/S top of table computer and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge

Refiting the complete structure with pvc clamp piono type hinges, rubber shoe ,screws and washer to make it funtionel after tightening the loose parts all as shown on drowing for Table computer (FD--28,27,& FD-33 & TP).

S&F new sliding channel of key board all shape and size as shown in drg Table computer (FD--28,27,& FD-33 & TP).

Table Dining 6 Pers/8 Pers : Removing of the old U/S top from Table Dining 6 per and S and F New Top of Table dining 6 pers made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polushed all round the top ,including tightening of frame with bamboo pins,screw wood ss before fixing of top.Complete all as shown in drg and directed by Engr-in-Charge.

Removing of the old U/S top from Table Dining 8 per and S and F New Top of Table dining 8 pers made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polushed all round the top ,including tightening of frame with bamboo pins,screw wood ss before fixing of top.Complete all as shown in drg and directed by Engr-in-Charge for Table Dining 6 Pers/8 Pers.

Taking out old U/S legs of table dining 6 pers/8 pers and S&F new legs of second class hard wood Teak of existing shape and size all as specified shown on drg and directed by Engr-in-Charge for Table Dining 6 Pers/8 Pers.

All as per item No 31.20 but new Short rail for Table Dining 6 Pers/8 Pers.

All as per item No 31.20 but new long rail for Table Dining 6 Pers/8 Pers.

Side board- (FD.-26 FD-241 FD-371):Taking out old U/S front single door of side board and S&F new door made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 4mm thick teak wood beading all-round the top all as specified on drawing and directed.

Taking out old U/S side of side board and S&F new side made of 18mm thick prelaminated particle board, exterior grade, one side teak face and white laminated on other side complete all as specified on drawing and directed for Side board- (FD.-26 FD-241 FD-371).

Taking out old U/S back portion plywood of side board and S&F of new plywood 6mm thick, BWR grade, commercial all as specified on drawing and directed for Side board- (FD.-26 FD-241 FD-371).

Taking out old U/S top board of side board and S&F new top board made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick awood beading all-round the top all as specified on drawing and directed for Side board- (FD.-26 FD-241 FD-371).

Taking out old U/S bottom portion board of side board and S&F of new bottom board made of 18mm thick, prelaminated prarticle board, extrerior garde both face white laminated complete all as specified on drawing and directed for Side board- (FD.-26 FD-241 FD-371).

Taking out old U/S drawer of side board and S&F of new drawer to be made of 12mm thick, well seasoned sheesham wood planks and 6mm thick commercial ply at bottom of drawers Make: Century/Archid. complete all as specified on drawing and directed for Side board- (FD.-26 FD-241 FD-371).

Removing of U/S knob and S&F new knob best quality as per drg and directed by Engr-in-charge for Side board- (FD.-26 FD-241 FD-371).

Book case (237):- Taking out old U/S front single door of book case and S&F new door made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing.

Taking out old U/S side of book case and S&F new side made of 18mm thick prelaminated particle board, exterior grade, one side teak face and white laminated on other side complete all as specified on drawing for Book case (237).

Taking out old U/S back portion plywood of book case and S&F of new plywood 6mm thick, BWR grade, commercial all as specified on drawing for Book case (237).

Taking out old U/S top board of book case and S&F new top board made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing for Book case (237).

Taking out old U/S bottom portion board of book case and S&F of new bottom board made of 18mm thick, prelaminated prarticle board, extrerior garde both face white laminated complete all as specified on drawing for Book case (237).

Removing of U/S knob and S&F new knob best quality as per drg and directed by Engr-in-charge (Book case 237)

HAT STAND WITH MIRROR (FD-233) :-Taking out u/s mirror of hat stand and S&F of new mirror, 4mm thick of Make : Atul/Modiguard and fixed complete all as pecified on drawing

S&F in replacement of new aluminium cap hooks as per existing shape & sixe complete all as specified on drawing for HAT STAND WITH MIRROR (FD-233).

Taking out unserviceable back portion plywood of hat stand and S&F of new 12mm thick plywood, BWR grade, commercial type complete all as specified on drawing HAT STAND WITH MIRROR (FD-233).

Removing of old unsv plywood front side of hat stand and and S&F new plywood of hat stand one side teak face 4 mm thick with 4 mm thick teak wood beading all round HAT STAND WITH MIRROR (FD-233).

Polishing :M&L for preparation of old painting/polishing surfaces by scrubbing existing old polished surface with sand paper, cleaning all dust, filling & stop bore holes with pasty filter prepared by mixing plaster of paris water to a creamy consistence and adding raw in quantity required to obtain the desired colour to the base and to surface allow to been dried up and set aside for 24 hrs for the surfaces to harden rub the surface with sand paper it is thoroughly smooth and dried to receive a coat of acrylic wood finish polish complete all as specified and as directed at site. Make : Berger/Asian/Shalimar. Chair dining

Chair Easy for Polishing.

Chair writing/CBA for Polishing.

Bed Ply wood top/cot newar/bed newar for Polishing.

Table Center for Polishing.

Table 3'x2' With/Without Drawer for Polishing.

Table Peg for Polishing.

Table Writing Med/small for Polishing.

Teapoy for Polishing.

Side board for Polishing.

Book Case for Polishing.

Table Dressing Ladies for Polishing.

Table Dressing Gents for Polishing.

Table clerk office wooden for Polishing.

Bin soiled linen for Polishing.

Stool dressing for Polishing.

Hat stand for Polishing.

Table Dining 6/8 Per for Polishing.

Sofa Set 5 Seated/4seater/3seater for Polishing.

Chair CB Steel w/o Arms (FD-75):- S&F new seats of new teak wood duly Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel without arms after removing existing damage/broken seat all as specified and directed by Engr-in-charge

S&F new back of new teak wood duly Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CBB steel without arms after removing existing damage/broken back all as specified and as shown on drg for Chair CB Steel w/o Arms (FD-75).

S&F new two Nos flate iron size 20x5x 415 mm long to be fixed both leg by welded in below the seat of chair CB steel both front and rear duly two nos hole in each iron flate for screwing seat to the flat duly black /OG painted over a coat of red oxide steel primer rest all as directed by Engr-in-Charge for Chair CB Steel w/o Arms (FD-75).

Removing of old existing U/S cap and S&F new PVC cap for chair CBB steel without arms for Chair CB Steel w/o Arms (FD-75).

Removing of existing paint by scraping with abrasive cloth and painting two coats of OG synthetic enamel paint on steel surface and preparation of surface complete all as shown on drg and all as directed by Engr-in-Charge for Chair CB Steel w/o Arms (FD-75).

CITIZEN FURNITURE INDUSTRIES

RAJAN TRADERS

Avtarsinghchaddhaandcompany

shambhavee udyog