Road

Name of Work :- Strengthing of Kathwada Bhuvaladi Road Km 0/00 to 2/200 Ta.Dascroi Dist.

Ahmedabad Package No. MMGSY/SCSP/16 (2026-2027)

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item (with brief specification

Quantity Unit In Amount

No and reference to book of specifications)

1 Item No. - 1 Clearing and grubbing road land 0.880 Hect. 28393.04

including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm

removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means

in area of light jungle

2 Item no.-2 Earth work for embankment including 1897.00 Cmt 126.68

breaking clods dressing with all lead & lift

(including watering rolling and consolidation of

subgrade in layers including filling the depressions

which occur durring the process using vibratory

roller with 80 to 100 KN Static Weight (A) From

borrow area with in lead & lift

3 Item no- 3 Scarifying gravelled macadam or 8250.00 Smt 39.62

bitumen macadam surface 6 cm to 10 cm.depth

including stacking useful materials on road side and

disposing off remaining stuff.

4 Item no- 4 Providing laying and spreading granular 440.00 Cmt 1543.89

materials i.e. machine crushed material in required

proportion so as to have mix material gradation

equivalent to GSB grade II, mixing in place with

rotavator and grading with mortar grader at OMC

5 Item no. 5 Providing laying spreading and 1287.00 Cmt 1887.51

compacting stone aggregates of specific sizes to

water bound macadam specification incl. spreading

in uniform thickness, hand packing rolling with

vibratory roller 80-100 KN static Weight to proper

grade and camber, applying and brooming, stone

screening materials to fill-up the interstices of coarse

aggregate watering and compacting etc. complete as

per Specification. Grade–II(45 to 63 mm size M.C.

.T.Metal) 75mm compacted thickness (Two layer)

6 Item no. 6 Providing and fixing ordinary kilometer 3.000 No. 704.33

stone of precast C.C. 1:2:4 including necessary

reinforcement as per IRC type desing in C.C. 1:4:8

incl. leter and paints etc. comp.`

7 Item no. 7 Providing & fixing hectometer as per IRC 24.00 No. 356.50

type design incl. painting lettering etc. comp. (ii)

Fixing in C.C. 1:5:10

8 Item No- 8 Providing & fixing Indicator stone as per 147.00 No. 102.85

IRC type design incl. white washing (i) fixing in

9 Item no. 9 Providing and fixing guard stone of pre 30.00 No. 349.11

cast in situ in CCM 150 including necessary

reinforcement and oil painting as per drawing and

fixding in C.C. 1:4:8 etc. complete

10 Item no. 10 Direction sign (Junction board):- 2.00 No. 14831.65

Providing and fixing sing boards made out of 2mm

aluminium sheet; size 244 x 122cms. rectangle as as

per the design of IRC-67-1977 pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality

epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications;

Letters and numerals should be as per IRC-30-1968,

3.1m long (2 nos) stand post and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm

75x75x6mm as required; painted with best quality

epoxy coatings in black and white bends. the details

of symbol or inscription / numerals for each board

shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of size

45 x 45 x 60cms. for each leg. including excavation

curing etc. complete under the supervision of

engineer in charge.(A) Engineer Grade(VR)

11 Item no. 11 Village name/ Bump Ahed sign :- 2.00 No. 4842.24

Providing and fixing sing boards made out of 2mm

aluminium sheet; size 90 x 60cms. rectangle as as

per the design of IRC-67-1977 pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality

epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications;

Letters and numerals should be as per IRC-30-1968,

3.1m long (2 nos) stand post and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm

painted with best quality epoxy coatings in black and

white bends. the details of symbol or inscription /

numerals for each board shall be as per the

instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45 x 60cms.

for each leg. including excavation curing etc.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)

12 Item No- 12 Cautionary Warning Sign :-Providing 6.00 No. 3342.17

and fixing sing boards made out of 2mm aluminium

sheet; size 90 x 90 x 90 cms. equilateral triangle as

per design of IRC-67-1977. Pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with retro refiectives

heeting as per latest M.O.S.T.Specifications; 3.1m

long stand postand frame fabricated from suitable

sizeiron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as

required; painted with bestquality epoxy coatings in

black andwhite bends. The details of symbol foreach

board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the

supervision of engineer in charge.(A) Engineer

13 Item No- 13 MMGSY "LOGO" Board : Providing 1.00 No. 4861.05

and fixing of MMGSY LOGO informatory sign

board with Logo as per section 1700 of MORD

specifications and drawing. The board will be a

composite unit consisting of Two Plates of ACM

(Aluminum Composite Material), material

specifications as per clause 17001.3. The top most

plate will be of 3mm ACP in diamond shape of

600x600mm size, riveted with MS angle iron frame

of 25mmx25mmx5mm size on back on edges. The

Lower plate will be of 4mm ACP of 1100x300mm size

riveted with MS angle iron frame of 25mmx25mmx5mm

size on back on edges. Riveting of all the sheets over

angle and flat iron frame will be done neatly to have plain

surface on one side. The angle iron frame of Both the

plates will be welded to a 75mm x75mmx6mm Mild

steel post at Centre and this post will be embeded in

cement concrete M15 grade block of 450x450x600mm

below ground level. The height of the bottom of the lower

plate will be 1200mm from normal ground level. The

spacing between the diamond shaped plate and Lower

Plate is kept 150mm. MMGSY logo, letters and numerals

on the ACM should be made up of Retro Reflective

sheeting of Type-1 AEGP Class-A grade as per the latest

MORD section 1700 and IRC 67-2012 specifications. Al

the section of the frame and posts shall be painted

with primer and two coats of epoxy paint. The

design, painting and lettering shall be done as per the

MMGSY Logo sign Design and as directed by

Engineer in-charge. A warranty for 5 years for the

Retro reflective sheeting for Type-1 Class-A from

original manufacturer shall be submitted by

14 Item No- 14 MMGSY Project Information Board: 1.00 No. 11190.32

Providing and fixing of typical PMGSY Project

informatory sign board with Logo as per 1700 of

MORD specifications and drawing. The board will

be a composite unit consisting of Three Plates ACM

(Aluminum Composite Material), material

specificaitons as per clause 17001.3. The top most

plate will be of 3mm ACM in diamond shape of

600x600mm size, riveted with MS angle iron frame

of 25mmx25mmx5mm size on back on edges. The

middle 4mm ACM plate of will be 1200x150mm

size riveted with MS angle iron frame of

25mmx25mmx5mm size on back on edges. The

main 4mm ACM lower most plate will be

1500mmx600mm size, riveted with MS angle iron

frame of 25mmx25mmx5mm size. Riveting of all

the sheets over angle and flat iron frame will be done

neatly to have plain surface on one side. The angle

iron frame of lower most plate and flat iron frame of

the middle plate will be welded to two nos. 75mm

x75mm (12 SWG) sheet tubes posts placed at

1125mm apart centre to centre. the top of the middle

plate will be flushed with the top of 75mm dia

medium steel tube posts and these posts will be

embeded in cement concrete M15 grade block of

450x450x600mm below ground level. The height of

the bottom of the lower plate will be 1200mm from

normal ground level and the bottom of the middle

plate will be 100mm above the top level of the lower

most plate. the diamond shaped plate mounted over

flat angle iron frame will be connected to middle

plate by square steel section of 47mmx47mm,

thickness 12SWG having a spacing of 100mm

between the diamond shaped plate and middle plate

and this square section will be riveted to the bottom

point of the diamond shaped plate. MMGSY logo,

letters and numerals on the ACM should be made up

of Retro Reflective sheeting of Type-1 AEGP Class-

A grade as per the latest MORD section 1700 and

IRC 67-2012 specifications. Al the section of the

frame and posts shall be painted with primer and two

coats of epoxy paint. The design, painting and

lettering shall be done as per the MMGSY Signage

Guide and as directed by Engineer-In-charge. . A

warranty for 5 years for the Retro reflective sheeting

for Class-A respectively, from original manufacturer

shall be submitted by contractor.

15 Item no- 15 Citizen' s information Board- Providing 1.00 No. 10831.31

and fixing of typical MMGSY information board as

per instruction. Two ACP sheets of 3 mm thick, of

900 mm x 750mm size fixed at top & bottom duly

rivetted with MS angles of 25 x 25 x 5 mm thick

M.S angle shall be welded by two vertical M.S angle

of 5 mm thick to 75 mm x 75 mm of 12 SWG square

tubes posts duly embedded in cement concrete M-15

grade blocks of 600mm x 600mm x 75mm, below

ground level. The letters & figure of any shade

reflectorised with High Intensity Prismatic Grade

Retro Reflective Sheeting of Type-4 as per ASTM

D-4956 and latest MORD specifications; All

sections of framed posts and steel tube will be

painted with primer and two coats of epoxy paints as

per drawing Clause 1701 and Annexure

(10.16). (A) Class-B High intensity Grade Retro

Reflective sheeting

16 Item No – 16 Road Marking with hot applied 462.50 Smt 367.72

Thermoplastic compound with reffectorising glass

beads on bituminous surface. Providing & laying of

hot applied thermoplastic copound 2.5 mm thic

including reffectorising glass beads @ 250 gms per

sqmt area thickness of 2.5 mm is exclusive of

surface applied glass beads as per IRC 35. The

finished surface to be level uniform and free from

streaks and holes.

17 Item no. 17 Type - A, "W" : Metal Beam Crash 35.00 Rmt 3468.34

Barrier (Providing and erecting a "W" metal beam

crash barrier comprising of 3 mm thick corrugated

sheet metal beam rail, 70 cm above road/ground

level, fixed on ISMC series channel vertical post,

150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m

high, 1.1 m below ground/road level,all steel parts

and fitments to be galvanised by hot dip process, all

fittings to conform to IS:1367 and IS:1364, metal

beam rail to be fixed on the vertical post with a

spacer of channel section 150 x 75 x 5 mm, 330 mm

long complete as per clause 811)

18 Item no. 18 Supplying and fixing Cat eye 50.00 No. 326.23

(Stimsonite) made out from Acrilo beautile sterine

injuction high compreesed molding with reflector

made of MMC (Prismatic type of size 12 cm x 6 cm

x 2.5 cm) provided with bituminious adhesive 100 g.

with each unit for fixing (engineer grade) )

19 Item No – 19 Providing and filling in founddation 619.00 Cmt 3245.56

with ordinary Cement concrete M 100 mix and

providing necessary vertical pin headers including

formwork, vibrating ramming and curing complete

20 Item No- 20 Providing and laying Ordinary C.C M. 1650.00 Cmt 5792.39

300 exposed work with curing .compacting with

surface mechanical vibrator mechanical float

channeling. Including Provision Of Contraction,

expantion,Construction and Longitudinal Joint

Joint filler, Sepration Membrane,Dowel Bar, Tie

rod,etc. as per Drawing, Design & Instruction of

Engineer in charge.

21 Item No- 21 Supplying fixing & joining reinforced 75.00 Rmt 1069.82

concrete heavy duty non pressure pipe carrying

indian railway standard with collars for culverts

carring heavy traffic as per Indian railway standard

specification including setting and joining the pipe

in cement mortar 1:2 watering or laying (to level and

slope )of I.S.class NP-3 300mm internal dia

Rs. One Crore Fifty Seven Lacs Seventy Seven Thousand Seven Hundred & Paisa Seven Only

I/We am / are wolling to carry out the work at .............................................

.................................................... % above/ below percent (Should be wrriten in figures and words)

of the estimated rate mentioned above. Amount of my/ our tender works out as under.

*Estimated Amount *Estimated Amount

(* Please strike out whichever is not applicable.)

Notes 1 - All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as directed.

GM\W v! ov AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0lJhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Notes 2 - All the columns is Schedule should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

GM\W vZ ov VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL SMg8=FS8Z[ 5MTFGL ;CL SZJL

Deputy Executive Engineer Executive Engineer

R & B Panchayat Sub Division R & B Panchayat Divisions

Ahmedabad Ahmedabad