CONSTRUCTION OF NEW ASSEMBLY BUILDING AT RFI ISHAPORE

Amount

Lump sum price worked out by the Contractor for “BUILDINGS AND STRUCTURES” as listed in Schedule ‘A’ Part-I Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs. 4,18,00,000.00 inserted by the MES in Schedule ‘A’ Part-I

Lump sum price worked out by the Contractor for “EARTH WORK , EXCAVATION & SITE CLEARANCE” as listed in Schedule ‘A’ Part-II Representing ** _____ % ________ percent *Above / Below the lump sum price of Rs.1,48,911.90 inserted by the MES in Schedule ‘A’ Partt-II

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Part-III Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs. 5,13,330.80 inserted by the MES in Schedule ‘A’ Part-III

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY ” as listed in Schedule ‘A’ Part-IV Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs. 54,087.50 inserted by the MES in Schedule ‘A’ Part-IV

Lump sum price worked out by the Contractor for “ROAD/PATH/HARD STANDING” as listed in Schedule ‘A’ Part-V Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs. 5,38,652.00 inserted by the MES in Schedule ‘A’ Part-V

Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part-VI Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.39,005.40 inserted by the MES in Schedule ‘A’ Part-VI

Lump sum price worked out by the Contractor for “AREA DRAINAGE ” as listed in Schedule ‘A’ Part-VII Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.4,95,156.95 inserted by the MES in Schedule ‘A’ Part-VII

Lump sum price worked out by the Contractor for “FENCING AND GATE” as listed in Schedule ‘A’ Part-VIII Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.25,642.90 inserted by the MES in Schedule ‘A’ Part-VIII

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Part-IX Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.5,76,911.60 inserted by the MES in Schedule ‘A’ Part-IX

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part-X Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs. 60,869.60 inserted by the MES in Schedule ‘A’ Part-X

Lump sum price worked out by the Contractor for “AIR CONDITIONING” as listed in Schedule ‘A’ Part-XI Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.3,24,360.50 inserted by the MES in Schedule ‘A’ Part-XI

Lump sum price worked out by the Contractor for “LIGHTENING PROTECTION” as listed in Schedule ‘A’ Part-XII Representing ** _______ % ____________ percent *Above / Below the lump sum price of Rs.1,73,869.00 inserted by the MES in Schedule ‘A’ Part-XII

SCHEDULE 'A' PART-III(A) : INTERNAL ELECTRIFICATION Supply and fix energy efficient 200 Watt LED highbay light IP-66 luminaire with high efficacy upto 130LPW complete all as specified and directed Make:-Havells Cat No BAYBRITES AUCER HBP 200W LED 757WBTOLTG or equivalent model of Wipro/Crompton Greaves

Supply and fix decorative ultra slim round profile LED fiiting / fixture with extruded polycarbonate body environmental friendly, energy efficient, ready to use pack for watage 18 W, 6500 K, 230 Volts with 18 Watts LED lamp complete with all accessories internally prewired including connecting with twin core twisted flexible cable of 0.75 Sq mm, 3 core copper conductor from ceiling rose to light fitting complete all as specified and directed. Make:-Hevells Cat No LHEXBLP7UN1W018 or equivalent model of Philips/ Bajaj

Supply and fixing LEDTube light fitting (1 x 20 Watt) compact industrial batten suitable for single T8 LED tube including LED T8 tube with extruded Al body, PC diffuser and inbuilt driver double sided connection, 230 volts with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable of 0.75 sq mm 3 core copper conductor from ceiling rose to light fittings complete all as spcd and directed. Make:-Crompton Cat No - Batten - DIJB12LT8-20 LED tubes - LTT8-20 or equivalent model of Philips/ Havells

Supply and replace of Recess mounting LED light fittings of size 2 x 2 feet with 36 watt CDL complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable of 0.75 sq mm 3 core copper conductor from ceiling rose to light fittings complete all as specified and directed. Make:- Crompton Cat Part No LCTLRNE-36-FO-CDL or equivalent model of Philips/ Havells

Supply and fixing MCB isolator 4 pole, 415 volts 125 Amps, 10 kA, 'D' curve complete all as specified and as directed. Make - C&S Product Code - CSMBS4ISO125 or euivalent make of Legrand/Havells

Supply and fixing MCB isolator 4 pole, 415 volts 100 Amps, 10 kA, 'D' curve complete all as specified and as directed. Make - C&S Product Code - CSMBS4ISO100 or euivalent make of Legrand/Havells

Supply and fixing MCB SPN 240 volts 63 Amps, 10 kA, 'C' curve complete all as specified and as directed. Make - C&S Product Code - CSMBS1C63N or euivalent make of Legrand/Havells

Supply and fixing MCB SPN 240 volts 40 Amps, 10 kA, 'C' curve complete all as specified and as directed. Make - C&S Product Code - CSMBS1C40N or equivalent make of Legrand/Havells

Supply and fixing MCB SPN 240 volts 20 Amps, 10 kA, 'C' curve complete all as specified and as directed. Make - C&S Product Code - CSMBS1C20N or equivalent make of Legrand/Havells

Supply and fixing MCB SP 240 volts 63 Amps, 10 kA, 'C' curve complete all as specified and as directed. Make - C&S Product Code - CSMBS1C63 or equivalent make of Legrand/Havells

Supply and fixing MCB SP 240 volts 40 Amps, 10 kA, 'C' curve complete all as specified and as directed. Make - C&S Product Code - CSMBS1C40 or equivalent make of Legrand/Havells

Supply and fixing MCB SP 240 volts 20 Amps, 10 kA, 'C' curve complete all as specified and as directed. Make - C&S Product Code - CSMBS1C20, or equivalent make of Legrand/Havells

Supply and fixing MCB SP 240 volts 6 Amps, 10 kA, 'C' curve complete all as specified and as directed. Make - C&S Product Code - CSMBS1C6 or equivalent make of Legrand/Havells

Suppy and fix ceiling fans with electronic type regulator and accessories 230V, 1400mm sweep complete all as specified and directed Make : Havells model - Velocity/velocity HS or equivalent make of Bajaj/Usha/Orient

Supplied and fixed exhaust fans AC single phase 230/240V of size 300 mm sweep 900 rpm with louver all as specified and as directed. Make : Havells model - Turbojet SP or equivalent make of Bajaj/Usha/Orient/Crompton

Supplied and fix table lamp having adjustable angle can focus the light having 10 Watt LED lamp complete all as specified and directed. Make : Havells Lamp Cat No LHFXBZNNTN1W013, Bulb Cat No LHLDEUEEML8R010 or equivalent make of Bajaj/Crompton

M&L for exhaust fan, 450 mm sweep, 1400 RPM, single phase, 230 Volts, fixed on walls by bolts and nuts complete complete all as specified and directed. Make : Havells Model No Turbo jet TP or equivalent make of Bajaj / Crompton

M&L for air circulator, 750 mm sweep, single phase, 230 Volts, fixed on walls by bolts and nuts complete complete all as specified and directed. Make : Havells Model No Turbo force or equivalent make of Bajaj / Crompton

SCHEDULE 'A' PART-VI(A) : SEWAGE DISPOSAL M&L for construction of septic tank including excavation in any type of soil, foundation in PCC 1:2:4, brick wall in CM 1:4 RCC slab cover including RCC precast manhole cover having 6mm plate embedded all round, flag stone man hole cover, vent shaft etc., complete for 150 users complete as shown on drawings, as specified and as directed.

M&L for construction of soakage well complete of size 3.0 m dia x 3.0m depth complete as shown on drawings, as specified and as directed.

EXTERNAL ELECTRIC SUPPLY - PART-IX (A) M&L for cutting of bituminous road of 90cm in depth and 60cm in width for laying of GI pipes and making good of cutting area with earth filling, 450 mm thick sand filling and finally on top level of the road filling with 250mm thick PCC 1:2:4 type B1 (using 20mm grade stone aggregate) complete all as specified and directed.

Supply, install, testing and commissioning of factory made outdoor cubical type main LT panel of suitable size totally enclosed weather, dust vermin proof and CPRI approved made of angle iron frame 50mm x 50mm x 6mm with cable entry and exit through bottom with double compression copper stainless steel cable glands and gaskets and 3.15mm thick CRCA (cold rolled cold annealed) MS sheet bend to shape, front & back side operated double door with proper hinge, cable termination box and locking arrangement suitable for 3 phase 415 volts 50 Hz AC supply with copper bus bar 4 Nos of equal size 800 Amp rating supported on FRP sheets, a continuous earth bus bar of size 50mmx6mm GI will be given to the entire length of the panel at bottom, cable glands with independent plates at bottom for each outgoing and incoming cables and painting panel board complete with two coats of powder coated paint over a coat of red oxide primer with spray painting on internal and external surfaces and shall be complete including internal wiring using with suitable size of copper conductor cables and aluminium strips for incoming and outgoing connections for all switches/MCB's/MCCB's, bus bar cable alley. Bus bar shall be insulated with colour code/sleeves/tapes including necessary PCC (1:3:6) type C2 for foundation/platform all as specified and directed. LT panel board shall be complete in all following provisions :-

INCOMING (a) MCCB 4 pole, current rating 630 Amp, TM based overload, short circuit release+spreader, breaking capacity 50 KA at 415V, 50 Hz, make L&T Cat No DN3-630D or equivalent make in Legrand/Schneider/C&S/Siemens -01 No. (b) Rotary operating mechanism for MCCB + aux contact, Make ; Make L&T Cat No DN3-630 or equivalent make in Legrand/Schneider/C&S/Siemens-01 No. (c) 96 Sqmm digital ammeter (0-500A), CTR 500/5 Amp, Make L&T cat No -SIF96 or equivalent make in Legrand/Schneider/C&S/Siemens-01 No. (d) Tape wound CTs ratio : 500/5A, class>1, VA>15, Make Kappa/Gupta-03 Nos. (e) CT terminals, Make : connectwell, Cat No : CDTTS-03 Nos. (f) 96 sqmm digital volt meter (0-500)V, make : L&T Cat : SIF 96 or equivalent make in Legrand/Schneider/C&S/Siemens -01 No. (g) LED phase indication lamp (R, Y, B)>230V AC supply, Make : L&T, Cat : GEN NEXT or equivalent make in Legrand/Schneider/C&S/Siemens as approved-03 Nos. (h) LED indication lamp (ON, OFF, TRIP)>230V AC supply, Make : L&T, Cat No : GEN NEXT or equivalent make in Legrand/Schneider/C&S/Siemens-03Nos. (j) 6A SP MCB 10 KA, C series, Make : L&T, Cat No : BB10060C or equivalent make in Legrand/Schneider/C&S/Siemens-03 Nos. (k) Neutral link, Make : HPS, cat : NL/100 or equivalent make in Legrand/Schneider/C&S/Siemens. OUT GOINGS 250 A outgoing feeder (l) MCCB 4 pole, current rating 250 Amp, TM based having overload, short circuit release + spreader, breaking capacity 25 KA at 415 V, 50Hz, Make L&T Cat No DN2-250D Legrand/Schneider/C&S/Siemens - 01 No.

(m) Rotary operating mechanism for MCCB + aux contact, Make L&T Cat No DN2-250D or equivalent make in Legrand/Schneider/C&S/Siemens-01 No. (n) LED indication lamp (ON, OFF TRIP)> 230V AC supply, Make : C&S/L&T, Cat/Type: GEN NEXT or equivalent make in Legrand/Schneider/C&S/Siemens- 03 Nos. (o) 6A SP MCB 10 KA, C series, Make : C&S/L&T, cat No : BB10060C or equivalent make in Legrand/Schneider/C&S/Siemens-01 No. (p) Neutral link, Make : HPS, cat No : NL/100 or equivalent make in Legrand/Schneider/C&S/Siemens 63A Outgoing feeder (q) MCCB 4 pole, current rating 63 Amp, TM based having overload, short circuit release, breaking capacity 25KA at 415 V, 50Hz, Make L&T Cat No DNO-100C or equivalent make in Legrand/Schneider/C&S/Siemens-18 Nos. (r) Rotary operating machanism for MCCB + Aux contact, Make : Make L&T cat No DN0-100C or equivalent make in Legrand/Schneider/C&S/Siemens-01 No. (s) LED indication lamp (ON, OFF, TRIP)>230V AC supply, Make : L&T, Cat No : GEN NEXT or equivalent make in Legrand/Schneider/C&S/Siemens - 03 Nos. (t) 6A SP MCB 10 KA, C series, Make : L&T, cat No : BB10060C or Legrand/Schneider/C&S/Siemens-01 No. (u) Neutral link, Make : HPS, cat No : NL/100 or equivalent make in Legrand/Schneider/C&S/Siemens (v) 4 way power terminals, Make : HPS, Cat No : NL/100 or equivalent make in Legrand/Schneider/C&S/Siemens (w) Angle iron base frame of required size as per panel total leg height 600mm and grouting inside with PCC (1:2:4) type B1 using 20mm graded stone aggregate for 150 mm long legs made out of ISA 50x50x6mm thick angle iron duly painted-01 Job.

Supply, install, testing and commissioning of factory made indoor cubical type main LT panel of suitable size totally enclosed weather, dust vermin proof CPRI approved made of angle iron frame 50mm x 50mm x 6mm with cable entry and exit through bottom with double compression copper stainless steel cable glands and gaskets and 2mm thick CRCA (cold rolled cold annealed) MS sheet bend to shape, front & back side operated double door with proper hinge, cable termination box and locking arrangement suitable for 3 phase 415 volts 50 Hz AC supply with copper bus bar 4 Nos of equal size 400 Amp rating supported on FRP sheets, a continuous earth bus bar of size 50mmx6mm GI will be given to the entire length of the panel at bottom, cable glands with independent plates at bottom for each outgoing and incoming cables and painting panel board complete with two coats of powder coated paint over a coat of red oxide primer with spray painting on internal and external surfaces and shall be complete including internal wiring using with suitable size of copper conductor cables and aluminium strips for incoming and outgoing connections for all switches/MCB's/MCCB's, bus bar cable alley. Bus bar shall be insulated with colour code/sleeves/tapes including necessary PCC (1:3:6) type C2 for foundation/platform all as specified and directed. LT panel board shall be complete in all respect including the following provisions :-

INCOMING (a) MCCB 4 pole, current rating 250 Amp, TM based overload, short circuit release+spreader, breaking capacity 35 KA at 415V, 50 Hz, make L&T Cat No DN2-250D or equivalent make in Legrand/Schneider/C&S/Siemens-01 No. (b) Rotary operating mechanism for MCCB + aux contact, Make L&T Cat No DN2-250D or equivalent make in Legrand/Schneider/C&S/Siemens-01 No. (c) 96 Sqmm digital ammeter (0-250A), CTR 250/5 Amp, Make L&T, cat No -SIF96 or equivalent make in Legrand/Schneider/C&S/Siemens-01 No. (d) Tape wound CTs ratio : 250/5A, class>1, VA>15, Make Kappa/Gupta or equivalent make in Legrand/Schneider/C&S/Siemens-03 Nos. (e) CT terminals, Make:connectwell, Cat No : CDTTS or equivalent make in Legrand/Schneider/C&S/Siemens-03 Nos. (f) 96 sqmm digital volt meter (0-250)V, make : L&T Cat No : SIF 96 or equivalent make in Legrand/Schneider/C&S/Siemens -01 No. (g) LED phase indication lamp (R, Y, B)>230V AC supply, Make : /L&T, Cat No : GEN NEXT or equivalent make in Legrand/Schneider/C&S/Siemens-03 Nos. (h) LED indication lamp (ON, OFF, TRIP)>230V AC supply, Make : C&S/L&T, Cat No : GEN NEXT or equivalent make in Legrand/Schneider/C&S/Siemens-03Nos. (j) 6A SP MCB 10 KA, C series, Make : C&S/L&T, Cat/No : BB10060C or equivalent make in Legrand/Schneider/C&S/Siemens-03 Nos. (k) Neutral link, Make : HPS cat : NL/100 or equivalent make in Legrand/Schneider/C&S/Siemens. OUT GOING 250 A outgoing feeder (l) MCCB 4 pole, current rating 63 Amp, TM based having overload, short circuit release, breaking capacity 25 KA at 415 V, 50Hz, Make L&R Cat No DN0-100C or equivalent make in Legrand/Schneider/C&S/Siemens.-16 Nos.

(m) Rotary operating mechanism for MCCB + aux contact, Make L&T Cat No DNO-100C or equivalent make in Legrand/Schneider/C&S/Siemens.-01 No. (n) LED indication lamp (ON, OFF TRIP)> 230V AC supply, Make : L&T, Cat No : GEN NEXT or equivalent make in Legrand/Schneider/C&S/Siemens.- 03 Nos. (o) 6A SP MCB 10 KA, C series, Make : L&T, cat No : BB10060C or equivalent make in Legrand/Schneider/C&S/Siemens.-01 No. (p) Neutral link, Make : HPL, cat No NL/100 or equivalent make in Legrand/Schneider/C&S/Siemens. (q) 4 way power terminals, Make : HPL Cat No : NL/100 or equivalent make in Legrand/Schneider/C&S/Siemens.- 01 No (r) Angle iron base frame of required size as per panel total leg height 600mm and grouting inside with PCC (1:2:4) type B1 using 20mm graded stone aggregate for 150 mm long legs made out of ISA 50x50x6mm thick angle iron duly painted-01 Job

M&L for street light timer panel consisting of astronomical timer, contasotor 32 A TP, MCB 40A TPN complete all as specified and directed. Make : Havellsor equivalent make in Indrasian/Leader/C&SCat No IHXTS03060

S&F cast iron cable route indicator in round shape duly marked/engraved "CABLE LT" fixed on PCC (1:3:6) type C2 block of size 250mmx250mmx250mm complete all as specified and directed.

M&L LED street light operating on 230 Volts, AC supply, comprising toughned glass and high power LED having IP - 65 protection and efficacy 110 LM / W complete all as specified and directed. Make : Crompton Cat No LSTP - 90 - CDL- M or equivalent make in Bajaj / Havells

S&F barcket made of 40 mm GI medium grade pipe 1.50 m long bent to shape as required fixed on poles / building with MS clamps made of FI 20 X 4 mm fixed with nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F PVC junction box of size 205 mm X 255 mm X112 mm with hinged type door, 40 Nos terminal 15 Amps kit kat fixed on poles with MS clamps of suitable size fixed with nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make: Hensel Cat No KF2500 B or eqivalent in Sintex

EXTERNAL WATER SUPPLY - PART-X (A) M&L for GI flange 80mm dia with internally threaded and suitable for fixng of GI tubing 80mm bore complete all as specified and directed.

Material and labour for construction of 230mm thick brick masonry valve chamber built in CM 1:6 for valve pit of size (900x900x900mm) internal dimensions with 100mm foundation using PCC 1:4:8 type D2 with 100mm offset 15mm thick plastering internally and 15mm thick plastering externally in CM 1:6 upto 15 cm below ground level, 3mm thick MS sheet cover double door welded to 50mmx50mmx6mm MS anlge iron frame fixed with hold fasts in PCC 1:2:4 type B1 coping 50mm thick with PCC 1:2:4 type B1, 20mmx6mm flat iron hinges with locking arrangements including lock 65mm brass with keys, MS handles and applying one coat of red oxide primer two coat of synthetic enamel paint to all steel surfaces including excavation and earth work in any type of soil, RFR and disposal of surplus soil to a distance not exceeding 50 mtr complete all as specified and directed

M/S N C BANERJEE AND SON

MS SHRI B.C. DAS

BHOWMICK ENTERPRISES INDIA

NARSINGH DEVELOPERS LLP

DNS CONSTRUCTION COMPANY