NIT No. 17 Item No. 2 (22-23) EE (T)/ACE

Supply of Horizontal Sewage Non-Clog Centrifugal Sewage Water Pump capacity 600 to 700 meter cubic per hour at 9 to12 meter head, delivery & suction size is 200 X 200 mm, with CI Impeller, EN-8 Shaft & Gland Packed Coupled with Electric Motor 60 H.P., 1450 Rpm TEFC, IE2, 415 V, 3PH, 50 HZ, and also included Foot Mounted, Mounted on Common Base frame, Flexible Coupling & Coupling Guard. Make KBL / Jyoti / KSB/ M&P/ Other DJB approved make

Dismantling of existing pump set along with allied accessories also breaking of existing RCC foundation and making of new R.C.C. foundation for new pump set as mentioned above to suitable size by pneumatic hammer machine and Gas Cutter, Welding with help of manual labour etc.

Fixing of new base frame along with the suitable size of SS foundation bolts in the CC foundation. The job also includes fixing of Pump & motor on the base frame dully fitted with the tyre coupling and doing proper alignment of the motor & pump.

Supply of MS pipe made out of 8 mm Thick MS plate i/c welding, cutting, painting both Approved side with black anticorrosive bituminous paint of approved brand and tested to a head of Rate 15 kg/sqm conforming to IS 3589/1981, IS 7322-1974, IS 784-1978 and relevant codes i/c cost of plate and carriage at site complete as directed by Engineer-in-Charge. DJB S.O.R.

Supply of 8 mm thick MS Flanges for 200 mm dia. MS Pipe

Supply of 200 mm dia. bends made out from 8 mm thick MS Sheet, dully welded and having flanges with holes on both sides

Supply of 200 mm dia NRV. Make :- Kirloskar / IVC / Other DJB Approved make

Supply Non rising Sluice valve of size 200 mm Make: - Kirloskar / IVC / Other DJB Approved make

Supply of M.S Nut bolts washer. D.J.B. S.O.R: Item Code1034

Rubber insertions for 200 mm dia pipe joints DSR 2018: Item Code1378

Supply of 150 x 75 mm size MS Channel for supporting the suction & delivery lines of the pumps.

Fixing of the above item in the pump house as per the requirement with the help of labour, Gas Cutter, Welding and Tripod etc

Painting of the complete mechanical structure in the pump house (i/c M.S. Supports, Valves etc) with one coat of red oxide paint and two coats of black synthetic enamel paint.

Supply of 3 C x 25 sq. mm PVC insulated and FR PVC round sheathed, copper conductor(flexible). Make: Grandlay / Polycab / Gloster / Havells

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) DSR-2018

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm DJB SOR

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. DJB SOR

Providing and fixing earth bus of 25 mm X 5 mm GI strip on surface for connections etc. as required. DJB SOR

Providing of the insulating met for safety of the operational staff. Size 1x2 mtr., thickness-10mm. DJB SOR Make: Jyoti / National

Testing and commission of complete work in the presence of Engineer-in-charge with full satisfaction

Gupta Brothers

Raj Engineering Co.

Super System Engineers

CHANDERA BUILDERS

HYDROCON ENGINEERS