Construction of mini Secretrait office Building at Jawalamukhi Distt Kangra Himachal Pradesh

Providing and fixing 15cm (Fifteen centimetre) wide, semi circular (Durashine Gutter P Green 3050) 0.80 mm thick with zinc coating not less than275 gm/m² all finishes of approved such as with iron brackets 40x3mm (Forty into three millimetre) siz, bolts, nuts and washers etcetra including making necessary connections with rain water pipe complete including cost and carriage of material with in all leads, lifts and other incidentals, as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done and as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 12 mm thick Century Club Prime BWP-710 ply for plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel/Aluminium frame work, complete and as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 4 mm thick Century plywood, , one side decorative veneer conforming to IS:1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture complete and as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Polishing in high gloss/matt finish sealer polish on wood work in required color/wooden shade texture with following process in the sequence as detailed (i) The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.(ii) Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.(iii) On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.(iv) On this, 1st coat of polish is applied with spray gun using clear polish and PU thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final polish is applied with compressor pressure spray gun using clear polish and thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time and as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing,supplying, fabricating and fixing Make( Fenesta) UPVC windows ( Fenesta) Make in Walnut colour,Complete with multi chamber UPVC profiles galvanized steel reinforcement, all necessary hardware , EPDM gaskets screw , anchor and aceessories, fitted with 6 mm thick toughened clear glass,including weather-grade silicone sealant, fixing in position, making good the/Jambs reveals after installation, all labour tool & tackles, transportation, loading/unloading, complete in all respect as per the manufacture specification and as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing,supplying, fabricating and fixing UPVC Door ( Fenesta) Make in Walnut colour,Complete with multi chamber UPVC profiles galvanized steel reinforcement, all necessary hardware , EPDM gaskets screw , anchor and aceessories, fitted with 6 mm thick toughened clear glass,including weather-grade silicone sealant, fixing in position, making good the/Jambs reveals after installation, all labour tool & tackles, transportation, loading/unloading, complete in all respect as per the manufacture specification and as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government

Providing and fixing white vitreous china RIMLESS BLIND INSTALLATION WALL HUNG WC of Size: 380x525x375 mm (KUS-WHT-35953 BIUFSMPM ) with Control Plate Kubix (CNS-WHT-8555220SPPM) and Slim Concealed Cistern (JCS-WHT-2431FS) of Jaquar with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete in all respect and specification as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government

Providing and fixing White Vitreous China Table Top Basin, SIZE:510X400X135 mm ( FNS WHT- 40801) with 32mm C.P. brass waste coupling (ALD-CHR-705L130 of Jaquar) including cutting holes and making good the same including neccessary fitting complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 25 mm thick Ist.class Indian Teak wood planks tongued and grooved, in flooring fixing to wooden base frame with iron screws complete (base wooden frame to be paid separately) andas per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.