Repairs/Renovation of Satpura Club at O. F. Itarsi Estate

Amount

Excavating over areas not exceeding 1.50 mtr in depth in hard/dense soil for floor, plinth etc and getting out, all as per specification and as directed .

M & L for hardcore of broken stone or boulder of gauge n.exc. 63mm, spread and levelled in layers not exceeding 15 CM thick watered and rammed to a true surface

Supply & filling of Sand under floors or in foundations including watering and consolidation as directed.

Providing & Laying of cement concrete D2-type, 1:4:8 mix. (40mm graded aggregate) in foundations, filling, Floors etc.

Providing & Laying of cement concrete B2-type, 1:2:4 mix.(40mm graded aggregate) in foundations, filling, Floors etc. excluding the cost of form work but including the cost of finishing & curing etc. all as per specification and as directed

Providing & Laying of reinforced cement concrete B1 type, 1:2:4 mix. (using 20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.as per specification as per directed.

Forming /drilling, mortice holes not exceeding 50 cucm for balusters, newels, ragbolts, etc

Providing & Construction of Brick work with sub-class `B' bricks straight or curved with modular bricks in cement mortar 1:6 all as per specification and as directed.

Providing form work to sides & soffits for rough finished flat surfaces of concrete i.e. foundations, footings, plinth beams etc.

Supply & Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.etc. as directed.

Resecuring and Easing shutters of any description and adjusting without taking down exc. 1.00 sq. m. and n. exc. 2.00 sq. m. each

Resecuring and Easing shutters of any description and adjusting without taking down n. exc. 1.00 sq. m. all as directed.

Resecuring and Easing and Refixing shutters of any description and adjusting exc. 1.00 sq. m. and n. exc. 2.00 sq. m.in same opening all as directed.

Supply & fixing of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides faces is covered with decorative face veneer with lipping/frame to match all as directed.

Supply and Fixing of 200 mm aluminium anodised barrel tower bolts of extruded section.

Supply and Fixing of 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as directed.

Supply and Fixing of 100 mm butt hinges of medium weight as directed.

Supply and Fixing of 100 mm aluminium handle fabricated type ionised.

Supply and Fixing of 200 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed all as directed.

Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples ® fixing in old place as directed.

Providing & Fixing of TMT bars 10mm Dia. and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 MM Dia or securing with clips quality confirming to EIC

Providing & Fixing of TMT bars 6 to 8 mm Dia. and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 MM Dia or securing with clips quality confirming to EIC

Supply and fixing of 24 mm dia. mild steel bolts purpose made with hexagonal or square or grouting piece head one end & screwed the other end to be fitted with washers and one hexagonal or square , 500 mm long as directed.

Supply, Fabrication and erection/fixing of M.S. structural steel Work Fe 290(Gde-E- 165)quality in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.all as directed by EIC.

Supply and fixing of Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

supply and fixing of steel rolling shutters thickness of laths 1.25 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type all as directed.

M & L for cutting grooves in brick/ concrete surface 75 X 65 mm and shapping the horizontal face of groove with PCC-1:2:3 & CM 1:3 all as directed.

Supply and fixing PRE- PAINTED Galvanised corrugated steel sheeting 0.50 MM total thickness Coloured glossy/matt finish regular modified polyster painting top painting 18-20 micron thick and bottom painting 5 - 7 micron thick epoxy primer service coat with corrugation side lap fixed with L type or J TYPE or cranked hook bolts or self tapping screw in roofs, walls etc. all as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.

M&L Glazed ceramic Coloured tiles in vertical surface 350x 250x 7 mm to 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc. as directed.

M&L Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. as directed

Raking, cutting and waste on glazed tiles all as directed.

Supply and fixing Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished,area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

Supply and fixing Vitrified ceramic tiles 10 mm thick ( square / rectangular ) area of each tiles exc. 0.36 sq. m. sq. m.

Supplying and Fixing of Granite ( of any type ) tiles 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with shite cement with admixture of pigment to match the shade of granite stone incuding grinding and polishing type.

Rounding to edges of stone slabs one edge such as in steps , cooking platform and other similar situations.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Providing Rendering 10 MM thick cement plaster with cement mortar 1:4 admixed with water proofing compound on fair faces of brick work or concrete surfaces. including the cost of finishing & curing etc as directed

Supply & Apply 3mm thick wall care putty on wall surfaces free from dust, dirt, loose scales, grease etc. All as directed.

Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, as directed.

Supply and laying of screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying tiles.

Supply & Providing Dubbing out average10 MM thick cement plaster in 1:4 cement mortar admixed with water proofing compound on fair faces of brick work or concrete external surfaces. including the cost of finishing & curing etc as directed

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as directed.

Preparation of old decorated plastered surface free from dust, dirt, loose scales etc. including removal of nails repairs/ refilling of plug holes, cracks, minor pittings with cement mortar, lime putty, plaster of paris and supply & apply one coat oil bound distemper on ceiling etc. as per specification and as directed

Complete removal of existing treatment on wall, ceilling etc. including Preparation of old decorated plastered surface free from dust, dirt, loose scales etc. including removal of nails repairs/ refilling of plug holes, cracks, minor pittings with cement mortar, lime putty, plaster of paris as per specification & as directed.

Preparation of old decorated plastered surface free from dust, dirt, loose scales etc. including removal of nails repairs/ refilling of plug holes, cracks, minor pittings with cement mortar, lime putty, plaster of paris and supply & apply two coat oil bound distemper on wall etc.as per specification and as directed.

Providing & fixing of 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane as directed.

Preparation of old decorated plastered surfaces and Supply & Apply one coat of primer paint and two coat Plastic emulsion paint on WALL / CEILING, cornices etc. all as directed.

Preparation of old decorated plastered surfaces and Supply & Apply two coat Plastic emulsion paint on WALL / CEILING, cornices etc. all as directed.

Preparation of old painted wooden surfaces etc. and supply & apply one coat Synthetic Enamel paint on wooden surfaces over 10 cm width or girth etc.

Preparation of old decorated steel surfaces free from dust, dirt, loose scales, grease etc. and Supply & Apply one coat of Synthetic enamel paint all as directed.

Preparation of new steel surface free from dust, dirt, loose scales etc. and supply & apply one coat red oxide primer & Two coats Synthetic Enamel Paint on steel surfaces etc. girth exc.10cm as per specification and as directed

Supply and apply black bituminous paint single coat on surface of any description all as directed.

M&L for preperation of surface and supply and apply aluminium paint two coat on roof treatment work as directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) etc. add if fixed in repairs as directed.

Supply & fixing of Vitreous China wash basin, white, flat back, size 550x400mm.(Make- CERA, Hindware, Johnson Pedder, Parryware or equivalent) including waste copouling, flush pipe etc. with fixing including cutting for and pinning in ends of brackets or erecting stand and all as directed.

Supply & fixing of Vitreous China wash down Water closet pan (pedestal pattern ) coloured complete including Supply & fixing of PVC 10 ltr flushing cistern, syphonic action type, low level, with inlet, ball valve, float, handle, brackets with flush pipe of chromium plated brass tube , 32mm Dia, for low level cistern, all as per specification and as directed.all as per EIC.

Supply & fixing of Indian type Water closet vitreous china squatting pan "Orissa" pattern size 580 x 440 mm white with integral foot rests including connectiojn to trap, flush pipe etc, including supply & fixing of PVC valveless, syphonic action type, flushing cistern 10 ltr, low level, white, with inlet, ball valve, float and handle including brackets, fixed in repair as directed.all as per EIC.

Supply & fixing of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75 mm dia

Supply & fixing of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm dia

S & F of PVC (SWR) bend 100 mm dia any radius

S & F of PVC (SWR) bend 75 mm dia any radius

S & F of 110mm PVC (SWR) junction single, (Single T) equal or unequal

S & F of 75mm PVC (SWR) junction single, (Single T) equal or unequal

Supply & fixing of PVC(SWR) Nahani trap, diameter of outlet in 75mm with grating including jointing to waste pipe.all as per specification and as directed.

Supply & fixing 32 MM dia bore Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms)as directed.

Supply & Lying CPVC pipes 20mm dia. with SDR with SDR 13.5 pipes & plain CPVC SDR 11 fittings etc. as directed

Supply & Lying CPVC pipes 16mm dia. with SDR with SDR 13.5 pipes & plain CPVC SDR 11 fittings etc. as directed

Supply & fixing of 20 MM Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as directed.

Supply & fixing of 15 MM Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed and fixed all as directed.

Supply & fixing 20 MM stop valves of but fancy type, chromium plated with long shank and cup (concealed type) all as directed.

Supply & fixing 15 MM stop valves of but fancy type, chromium plated with long shank and cup (concealed type) all as directed.

Supply & fixing Brass Elbow 20mm dia etc. as speciail fitting as directed.

Supply & fixing Brass Tee 20mm dia etc. as speciail fitting as directed.

Supply & fixing Brass Elbow (3/4 X ½)®etc. as speciail fitting as directed.

Supply & fixing 20mm dia. Male Brass Threaded Adaptor (MTA/ MBTA) )®as directed.

Supply & fixing 20mm dia. Female Brass Threaded Adaptor (FTA/ BTA)®as directed.

S&F Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms /40mm-60 gms)® etc. as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm etc. as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) etc. as directed.

Low density polyethylene pipes 40 mm dia (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of roofs, floors ( Other than ground floor) beams, chajjas, and other similar suspended works, All as directed.

Demolition of tiles of any description or thickness in floors/vertical surface, aprons, etc.

Demolition & dismentling Matting/felt on roof any type including,supports, cover fillets, if any all as directed.

Removing of demolised building materials etc. to a distance exc. 900 Mtrs. But not exc. 1.0 KM including loading and stacking at the destination (The quantity of demolished materials will be varyfied at destination) All as per specification and as directed.

Providing and Fixing Factory made rubber moulded, white cement based, pigmented blocks with lacquer coating and cured through drying process unidecor hydraucally pressed mechanically vibrated and compacted precast interlocking premium paving block in M40 Grade , 80 mm thickness of approved size / design from any colour ( Color , Red, Saffron, Dholpur, Olive Green, Dove Gray, Brown, yellow ). providing and laying in position over bed of sand or stone dust in line and levet. etc. all as directed

Supply & Fixing of point wiring using PVC sheathed 1.5 sqmm copper wire in PVC cassing for light and Fan point controlled by one switch complete with earth wire (PVC sheathed 1.5 sqmm copper wire in green colour) & earthing connection complete & separate neutral as per code of practice for electrical wiring instalation 732-1989. Make of wire POLLYCAB/FINOLAX/ANCHOR/HAVELLS

Supply & Fixing of point wiring for 3 pin socket outlet 5 Amps. on the same board with other switches with 1.5 sqmm copper wire in PVC cassing capping complete with contiuous earth wire (PVC sheathed 1.5 sqmm copper wire in green colour) & earthing connection complete & separate neutral as per code of practice for electrical wiring instalation 732-1989. Make of wire POLLYCAB/FINOLAX/ANCHOR/HAVELLS

Supply & Fixing of point wiring for Independent 5 pin socket outlet 5 Amps. with 1.5 sqmm copper conductor in PVC cassing capping complete with contiuous earth wire (PVC sheathed 1.5 sqmm copper wire in green colour) & earthing connection complete & with separate neutral as per code of practice for electrical wiring instalation 732-1989. Make of wire POLLYCAB/FINOLAX/ANCHOR/HAVELLS

Supply & Fixing of point wiring for 5 pin socket outlet 15 Amps. with 2.5 sqmm copper conductor in PVC cassing capping complete with contiuous earth wire (PVC sheathed 1.5 sqmm copper wire in green colour) & earthing connection complete & with separate neutral as per code of practice for electrical wiring instalation 732-1989. Make of wire POLLYCAB/FINOLAX/ANCHOR/HAVELLS

Supply and fixing of SP MCBs 10/16/20 Amps. Make; Havells/Anchor/Standard/HPL

S & F 2x2.5 sq. mm + 1x1.5 sq. mm earth wire wiring for circuit/submain wiring along with earth wire with thw following sizes of FR is PVC Insulated copper conductor, single core cable in surface/ recessed as required

S/F of MCB Box 8 way single pole with neutral 200 Amps. Rated busbar with single door. Make: Havells/ Acchor/ Standard /HPL

M&L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fitting make ANCHOR/CONA/BAJAJ/HPL/HAVELLS with ISI mark.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F of 5 AMPs. Switch piano fiush button single pole one way . Make; ANCHOR/CONA/ALMAC/HPL With ISI mark.

S & F of 5 Pin Socket 6 AMPs flush type mark; ANCHOR/CONA/ALMAC/HPL With ISI mark.

S & F of 15 AMPs. Switch piano fiush button single pole one way . Make; ANCHOR/CONA/ALMAC/HPL With ISI mark.

S & F of 5 Pin Socket 15 AMPs flush type mark; ANCHOR/CONA/ALMAC/HPL With ISI mark.

M&L Celling rose, 3 phase/PVC/Polycarbonate, Isolated body etc. As directed make ANCHOR/CONA/BAJAJ/HPL/HAVELLS with ISI mark.

Supply & Fixed of 20mm dia junction boxes (01 to 04 way) PVC rectangular or round block, make ANCHOR/CONA/BAJAJ/HPL/ HAVELLS with ISI mark.

S/F cost iron/pressed steell terminal boxes size 250mm x 200 with 60mm deep for mounting switches, sockets, fan regulator with 3 mm thick plastic laminated sheet cover.

S/F cost iron/pressed steell terminal boxes size 150mm x 75 with 60mm deep for mounting switches, sockets with 3 mm thick plastic laminated sheet cover.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m

M&L Earthing complete with galvanised steel earth plate electrode 60x60 cm. x 6mm thick, Buried directly in ground (Earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, cennected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Sanjay Traders (BID ID -878122)

Tanuj Construction Company (BID ID -878101)

MANOJ ENTERPRISES (BID ID -878374)