REPAIR MAINTENANCE OF INTERNAL WIRING DBs SUBMAIN WIRING FITTING n FIXTURES AT INS DEGA DEGA VIHAR AND INS EKSILA UNDER AGE EM AT GE ND VISAKHAPATNAM

Amount

Schedule 'A' Part -I

M & L in repairs for point wiring with 3 runs of 1.5 Sqmm PVC insulated and stranded copper cable 1100V, FRLS grade multistranded drawn in and including 20mm PVC conduit / casing caping /concealed PVC conduit on/in walls/ceiling with tee, bend, elbows , junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including not less than 1.0mm thick prefabricated galvanised boxes with white modular cover plate of suitable module for fixing modular switches, sockets, regulator and connected the earth wire to common earth dolly for One light / fan point / bell point / 5 Amps socket piont indpependent board controlled by one switch including taking down the existing old wiring of any description and type complete all as specified and as directed. Note:-(i) The quoted rate shall includes all the cost of cutting, chasing, cementing work and making all the disturbed surfaces of wall / ceiling good to match the existing wall / ceiling along with same colour.

Description all as per item No. 1 above but for 5Amp switch socket out let, same board , complete all as specified and directed.

Description all as per item No. 1 above but for 15/16Amp switch socket out let, independent with 2.5 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 2.5 Sqmm for earth continuity conductor, complete all as specified and directed.

Material and labour in repairs for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 25mm surface stove enamel steel conduit on walls/ceiling with tee, bend, elbows,junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity suitable for flame proof switches, sockets regulator and connected the earth wire to common earth dolly for One light point/fan point controlled by one switch complete all as specified and as directed.

Description all as per item No. 5 above but for 15/16Amp flame proof switch socket out let, independent with 4 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified and directed.

S & F in repairs Modular switch 1 way 6A, 1 module single pole complete all as specified and directed by Engr-in-charge.

S & F in repairs Modular switch 1 way 16A, 1 module single pole complete all as specified and directed by Engr-in-charge.

S & F in repairs ceiling rose surface bake lite 65 x 30 mm with 3 terminals complete all as specified and directed by Engr-in-charge.

S & F in repairs of Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified and directed.

S & F in repairs of Socket 15A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified and directed.

S & F in repairs bell push modular, one way 6 Amps, 1 module 230V complete all as specified and directed.

S & F in repairs of modular Fan step regulator, 120W - 1/2 module as per site requirement, complete all as specified and directed.

S & F in repairs flame proof switch socket and plug combined in LM6 cable termination box in LM6 ,16A 250 volt,2P+earth complete all as specified and directed.

S & F in repairs Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and directed.

S & F in repairs switch piano flush type,5 Amps 240 volts single pole one way, complete all as specified and directed.

S & F in repairs switch socket combination 2 in 1, 5 amps flush type / box type, complete all as specified and directed.

S & F in repairs switch socket combination 5/15 amps, 5 in 1, flush type / box type, complete all as specified and directed.

S & F in repairs socket outlet, 5 pin, 5 amps,flush type, complete all as specified and directed.

S & F in repairs socket outlet, 5 pin, 15/16 amps,flush type, complete all as specified and directed.

S & F in repairs fan regulator electronic type, rotary step, switch / socket type 240 Volt, complete all as specified and directed.

S & F in repairs Switch piano, flush type single pole, two way, 5 Amp, complete all as specified and directed.

S & F in repair Bell push flush type, 5 Amps complete all as specified and directed

S & F in repairs buzzer Ding dong, AC 230 volts single pole, complete all as specified and directed.

S & F in repairs LED tube light fittings, retro bar professional WH 5700K to 6200K and minimum 18 Watt of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs LED Tube Light Batten Frame wall mounted with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable for 18/20W LED Tube Rod including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs LED tube light rods retro bar professional WH 5700K to 6200K and minimum 18 Watt of cool white with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs LED light fittings, 2 feet long of minimum 9 Watt of cool white / warm wall mounted batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs square recessed mounted LED light (1'x1') of minimum 15 Watt warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs Square recessed mounted LED light (2'x2') of minimum 36 Watt warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs Square recessed mounted LED light of round type for Ceiling cutout: Ø 160 mm, height 16 mm, minimum 12 Watt warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fitting complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs Square recessed mounted LED light of round type for Ceiling cutout: Ø 210 mm, height 16 mm, minimum 18 Watt warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs Square recessed mounted LED light of round type for Ceiling cutout: Ø 210 mm, height 16 mm, minimum 600/900 Lumens (6 / 9 Watt) warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs flood light, 120 W new generation LED with high luminous efficacy, IP66 protected, front toughened glass, energy saving with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs Highbay light 120 Watt new generation LED with high luminous efficacy, IP66 protected, front toughened glass, energy saving with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs Highbay light 15000 Lumens (150 W) new generation LED with high luminous efficacy, IP66 protected, front toughened glass, energy saving with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs Building Security light LED type of 45 Watt Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs LED bulb non dimmable pin type 9 watts with modular angular holder complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs CMRI certified flame proof LED tube light fittings of not less than 40Watt output 5700K, PF>0.95 with pressure die cast aluminium housing IP-66 protection heat resistance toughen glass cover, electronic driver all accessories internally prewired connecting with flexible copper conductor of size 1.5sqmm including taking down existing light fittings of any description all as specified and directed.

S & F in repairs CMRI certified flame proof LED bulkhead fittings of not less than 40Watt output 5700K,PF>0.95 with pressure die cast aluminium housing IP-66 protection heat resistance toughen glass cover, electronic driver all accessories internally prewired connecting with flexible copper conductor of size 1.5sqmm including taking down existing light fittings of any description all as specified and directed.

Taking down ceiling fan of any size from its position and doing complete overhauling of fan including 02 no canopy ,and refixing the same after repairs complete all as directed by Engr-in-Charge. .

Materials and labour for rewinding of ceiling Fan complete upto 1400 mm sweep with heavy duty super enameled copper winding wire of existing gauge including all insulation materials, varnishing, heating, greasing etc. cutting and removing the old burnt winding complete all as specified and as directed. Note:- replacement of unserviceable parts like capacitor, bearing, bush, hanging clamp, reel & nut bolt etc measured and paid separately.

Supply only Ball bearing for ceiling Fan No 6200 complete all as specified and as directed.

Supply only Gun metal bush suitable for upto1400 mm sweep ceiling Fan, complete all as specified and as directed.

Supply only Hanging clamp and Nut bolt with split pin for ceiling Fan complete all as specified and as directed.

Supply only Fan capacitor of capacity 2.5 mfd epoxy filled type complete all as specified and as directed.

Supply only Fan down rod upto 600 mm complete all as specified and as directed.

Supply only electric insulation tape for insulation at cable joint complete all as specified and as directed.

M&L for Repairs to fan shaft by filling metal, cutting by machine, Grinding, polishing complete and making good adequately for ceiling fans complete all as specified and as directed.

M & L for painting of Ceiling Fan complete upto 1400 mm sweep with one coat of white paint/existing fan using spray machine painting including cleaning, washing of surfaces complete all as directed.

Labour only for checking ceiling fan of any size for safety purpose and doing necessary repairs where required complete all as directed by Engr-in-Charge. Note : spares required for repair will measured and paid seperatly. .

Supply and fixing ceiling fans complete with blades, down rods, 1200 mm sweep. complete all as directed by Engineer in charge

Taking down Exhaust fan / Air circulator / Pedastal Fan of any size from its position and doing complete overhauling of fan including replacement of fan clamp and split pin, rubber bush, fan capacitor of 4.0mfd and other spare partspainting with synthetic enamel paint over a paint of primer refixing the same after repairs complete all as directed by Engr-in-Charge. .

Rewinding of Exhaust fan / Air circulator / Pedastal Fan motor of sweep upto 380mm & any make (including flamepfoof/normal type), with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size, etc. complete all as specified and directed by Engineer- in -Charge.

Rewinding of Exhaust fan / Air circulator / Pedastal Fan motor of sweep 450mm & 600mm & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size, etc. complete all as specified and directed by Engineer- in -Charge.

Rewinding of Flame proof Exhaust fan / Air circulator motor of sweep upto 380mm & any make (including flamepfoof/normal type), with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size, etc. complete all as specified and directed by Engineer- in -Charge.

Supply & fix in repairs air ventilator ( PVC Body exhaust fan) 200mm sweep complete all as specified and as directed.

Supply & fix in repairs air ventilator (PVC Body exhaust fan) 250mm sweep complete all as specified and as directed.

Supply & fix in repairs exhaust fan steel body 300mm sweep complete all as specified and as directed.

S & F in repairs MCCB 3 / 4 Pole, 125 Amps, 50 Hz, 16KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as specified and as directed.

S & F in repairs MCCB 3 / 4 Pole, 160 Amps, 50 Hz, 36KA, 415 Volts, adjustable thermal and fixed magnetic typewith all necessary aluminium lugs and glands, etc complete all as directed

S & F in repairs MCCB 3 / 4 Pole, 200 Amps, 50 Hz, 36KA, 415 Volts, adjustable thermal and fixed magnetic typewith all necessary aluminium lugs and glands, etc complete all as directed

S & F in repairs MCCB 3 / 4 Pole, 250 Amps, 50 Hz, 36KA, 415 Volts, adjustable thermal and fixed magnetic typewith all necessary aluminium lugs and glands, etc complete all as directed

S & F in repairs MCCB 3 / 4 Pole, 400 Amps, 50 Hz, 36KA, 415 Volts, adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as specified and as directed.

Supply and fixing in replacement of Factory made sheet metal enclosure for VTPN MCCB DBs double door (Fixed flush to the wall), with provision of MCCB as incommer & outgoing as TPN 415 volt, 8 Way, IP-43 protection with 200 Amp rated bus bar and 4.0Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified and as directed.

Supply and fixing in replacement of Factory made sheet metal enclosure for VTPN MCCB DBs double door (Fixed flush to the wall), with provision of MCCB as incommer & outgoing as TPN 415 volt, 4 Way, IP-43 protection with 200 Amp rated bus bar and 4.0Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified and as directed.

Supply and fixing in replacement of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified and as directed.

Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 8 Way,DD, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified and as directed.

Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 12 Way, DD, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified and as directed.

Supply and fixing in repairs of MCB 16 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed.

Supply and fixing in repairs of MCB 16 to 32Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed.

Supply and fixing in repairs of MCB 40 to 63 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed.

Supply and fixing in repairs of MCB 16 to 32 Amp, 415 Volt,TP/ TPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed.

Supply and fixing in repairs of MCB 40 to 100 Amp, 415 Volt, TP/TPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed.

M&L for sub main wiring with five run of 10.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, including run of copper earth wire 10.0 Sq mm drawn through PVC concealed/surface conduict of 40 mm dia, including taking down unsv sub main wiring of any type, complete all as specified and as directed. Note: Copper conductor 05 run along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.

M&L for sub main wiring with five run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6.0Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified and as directed. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.

M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified and as directed. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.

M&L for sub main wiring with two run of 2.5 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 2.5 Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified and as directed. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.

Supply, lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty 1100volt grade with stranded aluminium conductor of size 50sqmm 3.5 core complete all as specified and directed by Engr-in-charge.

Supply, lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty 1100volt grade with stranded aluminium conductor of size 35sqmm 3.5 core complete all as specified and directed by Engr-in-charge.

Supply lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty 1100volt grade with stranded aluminium conductor of size 25sqmm 4.0 core complete all as specified and directed by Engr-in-charge.

Supply lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty 1100volt grade with stranded aluminium conductor of size 16sqmm 4.0 core complete all as specified and directed by Engr-in-charge.

Supply lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty 1100volt grade with stranded aluminium conductor of size 10sqmm 4.0 core complete all as specified and directed by Engr-in-charge.

Supply lay and testing of cable in trenches/walls / cable tray / PVC conduit FR-PVC insulated, flexible electric cable , 1100volt grade stranded copper conductor of size 10 sqmm 5 core complete all as specified and directed by Engr-in-charge.

Supply lay and testing of cable in trenches/walls / cable tray / PVC conduit FR-PVC insulated, flexible electric cable , 1100volt grade stranded copper conductor of size 6 sqmm 5 core complete all as specified and directed by Engr-in-charge.

Supply lay and testing of cable in trenches/walls / cable tray / PVC conduit FR-PVC insulated, flexible electric cable , 1100volt grade with multistranded copper conductor of size 4 sqmm 3 core complete all as specified and directed by Engr-in-charge.

Supply lay and testing of cable intrenches/walls / cable tray / PVC conduit FR-PVC,insulated, flexible electric cable , 1100volt grade with multistranded copper conductor of size upto 2.5 sqmm 3 core complete all as specified and directed by Engr-in-charge.

Supply lay and testing of cable intrenches/walls / cable tray / PVC conduit FR-PVC,insulated, flexible electric cable , 1100volt grade with multistranded copper conductor of size upto 1.5 sqmm 3 core complete all as specified and directed by Engr-in-charge.

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Material and labour for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed by Engineer in charge. (Note : punned thickness shall be measured for payment purpose)

Supply and laying in trenches un-reinforced pre cast concrete cable cover class LV,type I, flat size 250x150x40 mm complete all as specified and as directed.

Material and labour for 40 mm dia GI steel tubes 'light grade' for cable protection including sealing both ends complete all as specified and as directed by Engineer in charge.

Material and labour for cutting existing road/PCC/drain for laying of underground cable and including necessary earth work and making good to match with the exisitng surface with PCC1:3:6 type CI using 20mm graded aggregates complete all as specified and as directed.

M&L for replacement of startor 3Phase DOL type suiatable for hanger/rolling shutter two way revolving type (clockwise and anticlockwise both type) complete all as specified and directed

M&L for limit switch LSRS 10A-125,250 or 480 V ACsuitable for shutter/hanger door complete all as directed

Supply & fix in repair single pointed air termination Aluminium rod, 12 mm dia, 300 mm long.

Supply & fix in repair aluminium strip 25 mm x 3 mm Complete with saddles and fixing screws for Fitting the strip.

supply and fix in repair test point terminal box of size 200 x 100 x 100 mm made out of 2 mm thick hot dip galvanised sheet drilled and screwed including 6 Nos 15 mm long hexagonal head screws complete with test point terminal block made out of Gun metal or Phosphorus Bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws,with frequient opening/closing arrangement etc complete all as specified and directed.

M&L for Rewinding of rolling shutter/hanger door / hooter (siren) motor of capacity up to 7.5HP, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc.including repairing andoverhauling the gear box assembly by metal filling, cutting and other maching process in lathe complete including replacement of bearing of suaitable size and chain link and spocket with mounting shaft all as specified and directed by Engineer- in -Charge.Note:-The cost of transportation is included in the quoted rate.

M&L for repair of rolling shutter/hanger door including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc.including repairing and overhauling the gear box assembly by metal filling, cutting and other maching process in lathe complete including replacement of bearing of suaitable size and chain link and spocket with mounting shaft all as specified and directed by Engineer- in -Charge.Note:-The cost of transportation is included in the quoted rate.

S & F in repairs Wall mounted Alternating current plug and socket distribution box (Industrial socket) including plug connector 16 Amps, 2 pole and earth, IP 40 protection of metal body single phase 240 Volts, 50 Hz with provision for one 16 Amps MCB 2P including necessary fixing arrangements complete all as directed by the Engineer-in-Charge.

S & F in repairs Wall mounted Alternating current plug and socket distribution box (Industrial socket) including plug connector of 32 Amps, 3 pole, neutral and earth, IP 44 protection of metal body three phase 415 Volts, 50 Hz with provision for one 32 Amps MCB TPN including necessary fixing arrangements complete all as directed by the Engineer-in-Charge.

S & F in repairs moduler sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB, SPN, 20 Amps, 240 volts, 10 KA complete suitable for AC all as specified and directed.

S & F in repair Aviation obstruction light LED type complete including standard fixing arrangements including timer switch complete all as specified and as directed

Supply and laying of synthetic insulation rubber mat of size 2M X 1M X 2mm thickness suitable up to 3.3KV power supply, insulation category of class A for indoor LT panel complete all as specified

Supply and replacement of LED driver suitable for 50/100/120/150 watt LED light of any type complete all as specified

Supply and replacement of LED driver suitable for 30/45 watt LED bldg security light of any type complete all as specified

Supply and replacement of LED driver suitable for 36/50/75 watt LED panel light (2' x 2') of any type complete all as specified

Supply and fixing in repair switch socket combination modular box type upto 3 module 2 pin & 3 pin 5Amp, 230 volt, multipurpose, 2 screw to fix on board complete all as specified.

Supply and fixing in repair switch socket combination modular box type upto 3 module 2 in 1 type, 3 pin 15/16Amp, 230 volt, multipurpose, 4 screws to fix on board complete all as specified.

S & F in repairs GI powder coated louvers suitable for exhaust fans 300mm sweep including replacing copper conductor wire complete all as directed. Note: Quoted rate is deemed to be inclusive for necessary scaffolding as required for work at any height

S & F in repairs GI powder coated louvers suitable for exhaust fans 600mm sweep including replacing copper conductor wire complete all as directed. Note: Quoted rate is deemed to be inclusive for necessary scaffolding as required for work at any height

S & F in repairs 2mm thick GI hot dip galvanised / powder coated perforated type cable trays with cover of size 100mm width, 50mm depth fixed with and including necessary MS clamps, nuts, bolts fixed to walls / ceiling including taking down old cable tray complete all as directed by the Engineer-in-Charge.

S & F in repairs 2mm thick GI hot dip galvanised / powder coated perforated type cable trays with cover of size 200mm width, 50mm depth fixed with and including necessary MS clamps, nuts, bolts fixed to walls / ceiling including taking down old cable tray complete all as directed by the Engineer-in-Charge.

S & F Pedestal Fan having copper winding motor, AC, single phase 230/240V of size 450mm sweep, Metallic type complete all as specified and directed by the Engineer-in-Charge.(Note :- Rates for 5 years onsite replacement warranty is included in quoted rate.)

S & F wall mounted Fan having copper winding motor, AC, single phase 230/240V of size 450mm sweep, Metallic type complete all as specified and directed by the Engineer-in-Charge.(Note :- Rates for 5 years onsite replacement warranty is included in quoted rate.)

M & L in repairs for Chemical/mineral earthing by drilling of hole upto 250mm dia to a depth not less than 3.5m and fixed sealed maintenance free chemical filled earthing copper electrode (99% pure) 3 m long having the dia of 17.2 mm , including supply and installation of earth enchancing mineral compound tested for leaching and TCLP with NABL accredited Lab as per IEC 62561-7 -25kg buried directly and vertically in the hole with copper earth strip 25 x3 mm by means of bolts, nuts, check nuts and washers of copper connected to earthing test point terminal all as specified or indicated including testing ,below 1 ohm ,on completion and as directed by the Engineer-in-Charge. [Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, refilling the earthing hole including earthing lead upto 7.5m complete all as specified in SSR Part-I and all as per manufacturers instructions.]

M&L Earthing complete with copper plate electrode 600x600x3mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with copper earth strip of 20X3 mm by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 5, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & ,CI frame with CI 10mm thick cover, 20mm dia GI medium grade pipe for watering , and water funnel with wirw mesh, 40mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth strip of 25X4 mm by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber,CI frame with CI 10mm thick cover, 20mm dia GI medium grade pipe for watering , and water funnel with wirw mesh, 40mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber,CI frame with CI 10mm thick cover, 20mm dia GI medium grade pipe for watering , and water funnel with wirw mesh, 20mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion.

M&L for 20X3 mm copper strip for earthing connection to building, complete all as specified.

M&L for 25x4mm galvanised ironstrip for earthing connection to building, complete all as specified.

M & L for servicing of solar water heater with solar panel complete including necessary cleaning, brazing / welding & jointing of inlet outlet pipes, tanks,solar panels etc as per the site requirement and testing & checking of solar water heater and making in working condition using all necessary minor spares complete all as specified and directed by Engg-in-Charge.

Repair of UPS modules up to 30 kva comprising of IGBT, Based rectifire, Static IGBT based inverter with in built Galvanic Isolation transformer , Bi-directional Static and manual By-Pass Switches , input and out put filters for limiting THD within limits including minor parts, loading and unloading and transportaion to civil service center and back, Reinstallation, testing and commissioning after repair complete all as specified and directed.

Repair of UPS modules 30 KVA to 60 KVA comprising of IGBT, Based rectifire, Static IGBT based inverter with in built Galvanic Isolation transformer , Bi-directional Static and manual By-Pass Switches , input and out put filters for limiting THD within limits including minor parts, loading and unloading and transportaion to civil service center and back, Re-installation, testing and commissioning after repair complete all as specified and directed.

Repair of UPS modules 400 KVA comprising of IGBT, Based rectifire, Static IGBT based inverter with in built Galvanic Isolation transformer , Bi-directional Static and manual By-Pass Switches , input and out put filters for limiting THD within limits including minor parts, loading and unloading and transportaion to civil service center and back, Reinstallation, testing and commissioning after repair complete all as specified and directed.

Labour only for checking Serviceability / Working / Functional state of UPS modules up to 10 - 400 KVA and Frequency converter checking of all components and make it functional with minor repair, cleaning, etc and submit the test report to the Engr-in-Charge complete all as specified and directed. (Note:- Test reports is compulsory for payment in presence of User and MES Rep.)

Supply and fixing in repair of SNMP communication system with software and cards wit 12 workstations and service for 30 - 400 KVA UPS complete all as specified and directed.

Supply and fixing of DC card ser No DC-DC-03-0814 suitable for 30 - 400 KVA UPS complete all as specified and directed.

Supply and fixing of Firing Card ser No 8400-CH24-0606 suitable for 30 - 400 KVA UPS complete all as specified and directed.

Supply and fixing of AC Fans as per existing shape and size suitable for 30 - 400 KVA UPS complete all as specified and directed.

Supply and fixing battery lead of 10 Sqmm cross section copper conductor minimum length of 1 mtr including battery terminal and nut bolt.

Supply and fixing in repair maintence free battery 12 Volt upto 65 AH complete.

Supply and fixing in repair maintence free battery 12 Volt 65 AH to 120 AH complete.

Supply and fixing in repair maintence free battery 12 Volt 120 AH to 200 AH complete.

S & F in repairs Rectifier Control card / Inverter Control card for 30 - 60 KVA Online UPS system, complete all as specified and directed.

S & F in repairs Input sensing transformer for 30 - 60 KVA Online UPS system, complete all as specified and directed.

S & F in repairs IGBT Driver card for 30 - 60 KVA Online UPS system, complete all as specified and directed.

S & F in repairs Output feedback transformer for 30 - 60 KVA Online UPS system, complete all as specified and directed.

S & F in repairs Capacitors for 30 - 400 KVA Online UPS system, complete all as specified and directed.

S & F in repairs Power cables and control cables for 30 - 400 KVA Online UPS system, complete all as specified and directed.

M & L for Painting of complete LT Panels of any size and make with existing colour with 2 coats of synthetic enamel spray painting after cleaning of surface by scrubbing all dust particles/ grease/ oil etc and complete all as specified and as directed.

S & F of modular Cover Plate and Frame 1 module to 4 module suitable for Modular switch/socket complete all as specified.

S & F of modular Cover Plate and Frame 6 module to 8 module suitable for Modular switch/socket complete all as specified.

Taking down old metal flush box of any type and S & F in repairs of modular Metal Flush Box 1 module to 4 module suitable for Modular switch/socket complete all as specified and directed. Note:-(i) The quoted rate shall includes all the cost of cutting, chasing, cementing work and making all the disturbed surfaces of wall good to match the existing wall along with same colour.

Taking down old metal flush box of any type and S & F in repairs of modular Metal Flush Box 6 module to 8 module suitable for Modular switch/socket complete all as specified and directed. Note:-(i) The quoted rate shall includes all the cost of cutting, chasing, cementing work and making all the disturbed surfaces of wall good to match the existing wall along with same colour.

Labour for Taking down existing Lightning conductor / Aluminium strip / Terminal rod / Test point box etc and refixing by use of minor accessories such as screws, insulator, etc at existing buildings and testing complete all as specified and directed.

RK Associates (BID ID -3114795)

M/S Jayalakshmi Constructions (BID ID -3116047)

M.V.K.ENTERPRISES (BID ID -3115111)

ADITYA ENTERPRISES (BID ID -3126744)