REPAIRS TO COMPOUND WALL FENCING GATE DRAINS AND OTHER ALLIED WORKS UNDER AGE BR I OF GE ND VISAKHAPATNAM

Amount

Demolition of unreinforced cement concrete in ground floors and pavings not exc 15cm thick (below or above GL) of any description including removing debris and rubbish complete all as directed by the Engineer-in-Charge.

M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks including demolition od old brick / stone masonry complete all as specified and directed.

Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed.

M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces mixed with and including cement water proofing @ 2% by weight of cement finished even and smooth with out using extra cement complete all as specified and directed.

M & L for Hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface using broken stone or boulders complete all as directed.

M & L for 100mm thick, PCC 1:2:4, type B-2, using 40mm graded stone aggregate as in hard standing, PCC path including finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

M & L for 75mm thick, PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in plinth protection, flooring and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for forming construction joint 30mm deep, 10mm wide filled with sealing compound of Grade 'A' complete all as directed

M & L for PCC 1:3:6, type C-1, using 20mm graded stone aggregate as in lintels upto 1.5m span, copings, bed blocks for hold fasts, bed plates, roof kerbs and similar work including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

M & L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as directed.

M & L for 75mm thick, PCC 1:3:6, type C-1, using 20mm graded stone aggregate as in hard standing, sub base of flooring including finishing the surfaces even and rough for receiving top layer complete all as specified and directed.

M & L for Machine pressed precast cement conctete coloured interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 50mm thick sand complete all as specified and directed.

M & L for pre-polished cement concrete glossy finish chequered tiles of size 300 x 300 x 25mm thick with mixture of white & grey cement, set jointed and pointed with grey cement and no pigments in neat cement slurry as in floors and pointed with white cement mixed with pigments laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. [The design, colour and pattern shall be as approved by the GE]

S & F Machine cut kota stone slab flooring 20 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

S & F Machine cut kota stone slab 20 to 25mm thick as in vertical surfaces such as skirting laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L for Precast RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in landings, cover slabs (for manholes), shelves including necessary formwork, and the like and set in CM 1:4 including dismantling old cover slabs and removing debris complete all as specified and directed.

S & F mild steel framed work as in ornamental and intricate design such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors; ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling old structural steel work complete all as directed

S & F welded steel wire fabric of weight not exceeding 4 Kg/Sqm fixed to steel members using wire staples or welding as required complete all as directed

S & F 1.25mm thick mild steel Plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wooden or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles including dismantling old mild steel sheeting of any description complete all as specified.

M & L for TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L for TMT bars 6 to 8mm dia, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L for mild steel round bars 10mm dia and over, cut to length, bent to shape required and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete for chain link fencing all as specified and as directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directetd.

M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directetd.

M & L for preparation of new or previously untreated surfaces of wall and applying two coats of weather proof (100% Acrylic emulsion) paint exterior grade over a coat of primer complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for PCC 1:2:4, type B-2 using 40mm graded stone aggregate as in surface channels and drains complete all as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated / 'Z' profile steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling existing sheeting complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling existing sheeting complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in sectional area and in any position complete all as directed

M & L for rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engineer-in-Charge.

M & L for rolled mild steel plates (plain or chequered) channels, square cut or notched forming holes with riveted, bolted or welded attachment conforming to Fe 290 Gde E-165 complete all as directed

S & F mild steel work as in hand rails, wind ties, fencing posts and struts, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, securing bolts, posts and struts in fencing, etc and similar work conforming to FE-290 Gde E-165 complete all as specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but not exc 10cm long and diameter of neck 16 to 20mm complete all as specified.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in brick masonry or concrete and making good disturbed ground complete all as directed

Excavating in post holes (or similar holes) each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil

M & L for PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as directed.

S & F 4mm dia PVC coated MS galvanised chain link fencing of mesh size 75mmx75mm including line wires fixed with any standards, rails, straining bolts, etc including provision of neeesary binding wire including dismantling existing wire mesh complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing 600mm dia stainless steel punched type concertina coil as per IS-4454 with galvanised coating and punched type material as per IS-513 deep drawn quality with galvanised coating, having medium bardbs (barb length 24+1mm pitch between two barbs 35+1mm) fixed in position and secured to both sides of shaped angle iron post stretched to a length of 8 to 10m so as to achieve 600mm dia as in fencing including fixing with special galvanised fasteners such as J clips, C clips, U clips fixed at any height on compound wall including dismantling old concertina coil wire including necessary scaffolding as required complete all as specified and directed.[Note: After stretching the coil the length of the compound wall on which it has been strectched shall be measured as straight length for payment]

S & F Galvanized, 2 strand, steel barbed wire with 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc., including dismantling old fencing wire complete all as specified and directed. [Each line wire to be measured.]

Balaji Enterprises

Sri Venkateswara Constructions

M/s Sri vinayaka Infra

TECHNO SOFT SOLUTIONS

SAI KRISHNA ASSOCIATES

N V S S K N SIVA PRASAD

B.Veerabhadra Rao