Construction of Administrative Block and work shop at Govt ITI Ghumarwin District Bilaspur HP including development of site internal external services and construction of harvesting tank Septic tank with soak pit etc

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (up to all width), including dressing of sides and ramming of bottoms,up to all lift, including getting out the excavated soil and disposal of surplus excavated soil all lead and lifts as directed by the Engineer-in- charge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (up to all width), including dressing of sides and ramming of bottoms,up to all lift, including getting out the excavated soil and disposal of surplus excavated soil all lead and lifts as directed by the Engineer-in- charge. (a) Ordinary rock

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. including carriage of material in all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size). including carriage of material in all leads and lifts.

Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level. including carriage of material in all leads and lifts.

Providing and laying in position cement concrete of specified grade1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size).including carriage of material in all leads and lifts.

Providing and laying in position cement concrete of specified grade1:8:16 (1 cement : 8 coarse sand): 16graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for including carriage of material in all leads and lifts.

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Spiral staircases (including landing)

Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. including carriage of material in all leads and lifts.

All works upto plinth level

All works above plinth level upto floor V level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with PVC cross lock all complete upto plinth level including carriage of material in all leads and lifts. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding PVC cross lock all complete above plinth level including carriage of material in all leads and lifts. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of material in all leads and lifts.

Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/ 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). including carriage of material in all leads and lifts.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all lev

el in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all level in cement mortar 1:4 (1 cement :4 coarse sand) including carriage of material in all leads and lifts.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including carriage of material in all leads and lifts.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. including carriage of material in all leads and lifts. (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). including carriage of material in all leads and lifts.

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. including carriage of material in all leads and lifts.

Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) with tiles of light shade pigment using white cement including carriage of material in all leads and lifts.

Providing and laying vitrified floor tiles as per sample approved by the Engineer-in- charge (thickness not less than 10mm) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads and lifts.

Providing and laying Vitrified tiles as per sample approved by the Engineer-in- charge (thickness not less than 8 mm)with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. including carriage of material in all leads and lifts.

Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of light shade pigment using white cement including carriage of material in all leads and lifts.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. including carriage of material in all leads and lifts.

Providing and laying Ceramic glazed floor tiles as per sample approved by the Engineer-in- charge of 1st quality conforming to IS : 15622 of approved make in any colours such as approved, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. including carriage of material in all leads and lifts.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS : 15622 of approved make in any colours, shades and any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material in all leads and lifts.

Providing and fixing 18 mm thick Granite of any colour and shade gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. including carriage of material in all leads and lifts. (a) Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of material in all leads and lifts.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete including carriage of material in all leads and lifts.

Ridges plain (500 - 600mm)

Flashings/ Aprons.( Upto 600 mm)

Providing and fixing ACP sheet 3 mm thick in eaves board / facia / soffits including cutting, fixing with necessary fitting complete (Frame work should be paid separately) as per the instruction of Engineer-in charge including carriage of material in all leads and lifts.

Providing and fixing half round poly vinyl chloride PVC roof rain water Gutter 180 mm dia. with necessary accessories such as PCV joint bracket, short stop bracket, stop end outlet, running outlet, elbow 90 degree, support braket, rafter bracket, top bracket, gsaket etc complete including carriage of material in all leads and lifts.

Providing and fixing on wall face unplasticised Rigid 110 mm diameter PVC rain water pipes conforming to IS : 13592 Type A, including jointing with se

al ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including carriage of material in all leads and lifts.

Providing and fixing unplasticised 110 mm dia PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. including carriage of material in all leads and lifts.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. including carriage of material in all leads and lifts.

Coupler 110 dia.

Bend 87.5°110 mm dia.

Shoe (Plain) 110 mm dia.

6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts.

15 mm cement plaster on the rough side of single or half brick wall of mix including carriage of material in all leads and lifts.

1:4 (1 cement: 4 fine sand)

1:6 (1 cement: 6 fine sand)

20 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material in all leads and lifts.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work including carriage of material in all leads and lifts.

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) including carriage of material in all leads and lifts.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material in all leads and lifts.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material in all leads and lifts.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of material in all leads and lifts.

Providing and fixing factory made uPVC white colour sliding glazed window comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc and Three track three panels sliding window made of (big series) frame 108 x 45 mm & super sash profile I 60 both having wall thickness of 2.3 ± 0.2 mm and single glazing bead of appropriate dimension with 6mm clear toughned glass/SS 304 wire mesh and handle with all accessorie . Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

Providing and Fixing factory made Wpc (wood plastic Composite) door frame of size 125x60 mm, heaving density not less than 850 Kg/Cum with ivory texture finish, manufatured from high quality wood polymer composite material, fire resistant up to 30 minutes, heavy-duty type, fixed in position with stainless steel fasteners, screws and necessary accessories, all cpmplet as direction of the Engineer-in-charge. including carriage of material in all leads and lifts.

Providing and fixing ISI marked 40 mm thick flush door shutters including ISI marked Stainless Steel butt hinges with necessary screws conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including carriage of material in all leads and lifts.

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) Rectangular or square

Providing & fixing plain toughned glass 6 mm thick with necessary fitting , all complete including carriage of material in all leads and lifts.

Providing and fixing 300x25mm Stainless Steel D type handles of approved quality & make with necessary screws etc all complete including carriage of material in all leads and lifts.

Providing and fixing Stainless steel 100 mm mortice lock with 6 levers and a pair of lever handles of approve dquality with necessary screws etc. complete including carriage of material in all leads and lifts.

Providing and fixing Stainless steel 250x10 mm tower bolts, ISI marked, anodised with necessary screws etc. complete including carriage of material in all leads and lifts.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564,embossed on the body, door weight upto 36 kg to 60kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessorie sand screwsetc. complete. including carriage of material in all leads and lifts.

Providing and fixing 150 mm stainless steel finished floor door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete including carriage of material in all leads and lifts.

Providing and fixing 300x16 mm Stainless steel sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of material in all leads and lifts.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. including carriage of material in all leads and lifts. (a) 80x1.25 mm M.S. laths with 1.25 mm thick top cover.

Providing and fixing ball bearing for rolling shutters including carriage of material in all leads and lifts.

Providing and fixing aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as a

pproved by the Engineer-in-Charge along with accessories such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work including carriage of material in all leads and lifts.

Providing and fixing tinted toughned glass 6 mm thick on aluminium tubular work with necessary filling material complete in all respect including carriage of material in all leads and lifts.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections including carriage of material in all leads and lifts.

Providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)excluding the cost of centering and shuttering - All work up to plinth level. including carriage of material in all leads and lifts.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.) including carriage of material in all leads and lifts.

40 mm thick cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. including carriage of material in all leads and lifts.

Painting top of roofs with residual type petroleum bitumen of grade VG -10 of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete including carriage of material in all leads and lifts.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. including carriage of material in all leads and lifts.

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. including carriage of material in all leads and lifts.

1216 (16 mm OD) pipe

1620 (20 mm OD) pipe

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade two or more coats on new work including carriage of material in all leads and lifts.

Providing and fixing 4mm thick fire resistant ACP( Aluminium Composite panel) sheet ceiling including frame work of G.I./ M.S. box section 25x25x1.6 mm , fixed with suitable cleats, brackets, dash fasteners, screws, sealant and all necessary accessories as per design and drawing. The ACP sheets shall be of approve make , shade and colour, having a fire resistance of up to 2 hours, fixed over the G.I./ M.S frame work with proper alignment, level and smooth finish to form and even and decorative ceiling surface. The work shall include cutting, jointing, sealing and finishing complete as per the direction of Engineer-in-charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. including carriage of material in all leads and lifts. (a) 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. external work including carriage of material in all leads and lifts.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of material in all leads and lifts. (a) 25 to 40 mm nominal bore

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts. (a) 1000 litres net capacity tank

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. including carriage of material in all leads and lifts.

110 mm dia.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts. (a) 1000 litres net capacity tank

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia.

75 mm dia.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC single equal branch with ovel access door, ISI marked insertion rubber washer 3mm thick bolts and nutscomplete including fixing with approved adhsive etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC collers ISI marked of approved design fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC Cowl ISI marked of approved design fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

75 mm dia.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. including carriage of material in all leads and lifts.

110 mm dia

Providing and fixing 110 mm X 75 mm PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads and lifts.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of material in all leads and lifts. (a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of material in all leads and lifts. (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge. including carriage of material in all leads and lifts.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of material in all leads and lifts. (a) 510x1040 mm bowl depth 200 mm.

Providing and fixing wash basin with C.I. brackets, C.P. brass waste 32 mm and 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of material in all leads and lifts. (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.

Providing and fixing 100 mm dia cromium plated stainless steel grating confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Providing and fixing of G.I. Union for wash basin or sink 32 mm dia. confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of material in all leads and lifts.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of material in all leads and lif

Providing and fixing 750mmx20mm size C.P Brass towel rail complete with C.P Brass brackets fixed to wooden plugs with C.P brass screws confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA).

Providig and fixing C.P. brass towel ring complete fixed on wall face with concealed fittings arrangement, and confirming to BIS specifications including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Providing and fixing C.P. brass soap dish with C.P.brass brackets fixed to wooden plugs with C.P. brass screws, and confirming to BIS specifications,including carriage of material in all leads and lifts.

15mm nominal bore.

20 mm nominal bore.

Providing & fixing 15mm dia C.P. brass bib tap with capstan head including carriage of material in all leads & lifts. (Confirming to BIS Specifications)

Providing & fixing 15mm dia C.P. brass bib tap long body (Superior or heay type) including carriage of material in all leads & lifts. (Confirming to BIS Specifications)

Providing and fixing C.P. brass 15mm nominal bore angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of material in all leads & lifts. (Confirming to BIS Specifications)

Providing and fixing brass full way value with wheel (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA)

Cutting holes through existing brick/stone work including making good the same in cement mortar 1:6( 1cement:6 sand) per cms. Depth of cutting including carriage of material in all leads and lifts(i) Holes up to and including 400 sqcm in area.

Providing and fixing G.I./M.I. Union of following sizes (where not included in the item) (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA)

Providing and fixing P.V.C connection pipe with bras unions. (a) 30cm length / 45 cm length (I) 15mm Nominal size bore (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA)

Providing and fixing 32 mm dia P.V.C. Semi rigid waste pipe for sink or wash basin including P.V.C. waste fittings complete. (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA)

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100x100 mm size P type with Sewer bricks conforming to IS : 4885 including carriage of material in all leads & lifts.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with 5 litre white P.V.C flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including carriage of material in all leads & lifts.

Providing and fixing divisional plate for urinals 600mmx300mm size vitreous china (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA)

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 including carriage of material in all leads & lifts. (a) 150 mm dia Ductile Iron Class K-7 pipes.

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket including carriage of material in all leads & lifts. (a) 150 mm dia pipes

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts.

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With Sewer bricks conforming to IS : 4885

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) With Sewer bricks conforming to IS : 4885