REPAIR/REPLACEMENT TO FLOOR PLASTER, JOINARY, PANELLING AND SAINITARY FITTINGS, SHED, RAIN WATER PIPES, ROOF TREATMENT, ROLLING SHUTTERS AND MISC BNR AND ENM WORKS IN BLDG NO PC-1 PC-2, PB-1 AND OFFICE COMPLEX OF OAQA UNDER GE(I) RND DEHRADUN

Amount

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down shutter exc. 1 Sqm and n.exc 2 Sqm each of any description. complete all as specified and directed.

Dismentling of wall and ceiling boards/ Alca panel /fibre/ pvc Board/PVC sheet panelling pulp, insulation etc or insulation boards/ slabs/blankets any thickness incl cover fillets, fittings, complete all as specified and directed

M&L for solid PVC wall linning consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and manufacturer instruction complete all as specified and directed

M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and manufacturer instruction complete all as specified and directed

M&L for greasing and oiling in channel/collipsible gates of each parts i.e guide channels, roller, locking arrangement etc. with and including repairs as required for smooth functining of channel/collipsible gates complete all as specified and directed.

M&L for greasing and oiling in old rolling shutters (area not exceeding 10.00 sqm of each shutter) of each parts i.e guide channels, cranks, springs, gearbox and locking arrangement etc. with and including repairs as required for smooth functining of rolling shutter complite all as specified and directed.

Taking down carefully unservicable ball bearing from rolling shutters and S&F ball bearing heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed.

Taking down carefully unservicable spring from rolling shutters and S&F new spring heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed.

Taking down carefully unservicable safty lever mild steel lock any type from rolling shutters and S&F new safty lever mild steel lock 4 lever heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complete all as specified and directed.

M&L for preparing of old painted wooden surfaces over 10cm width or girth and making good including knotting and stopping,cleaning etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of wooden complete all as specified and directed.

M&L for preparing of old painted steel surfaces over 10cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of steel complete all as specified and directed.

M&L for preparing old surfaces of walls plastered or un-plastered by complete removal of existing treatment by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty & applying of Birla/JK white wall putty approx 1 mm thick as per manufacturer's instruction on existing prepared surface and Priming plastered and other surfaces with alkali resistant priming paint make the surface smooth by rubbing with sand papers etc and applying two coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed.

M&L for preparing old surfaces of walls plastered or un-plastered by complete removal of existing treatment brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty & applying of Birla/JK white wall putty approx 1 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two coat of weather proof exterior acrylic paint over a coat of primer complete all as specified and directed. complete all as specified and directed. NOTE:- Height of buildings upto G+4

All as per item No 14 above but on Ceiling Surface,Complete all as specified and directed.

M&L in repair for E-board false ceiling consisting of powder coated GI wall angle, main T and cross T of 25mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E- Classic board in pannelof size 600X600mm with necessary off cut including taking down and refixing of Electric fitting carefully complete all as specified and directed.

S&F in repair powder coated aluminium sliding window three track with two glass shutters using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperature 1.61 mm using aluminium powder coated section aluminiuj cleat, PVC track, bearing, handle, lock, rubber beading etc complte fittings. Note Size of aluminium section are as under :- (i) Three track top and vertical - Jindal main-2010 section No 20621 or equivalent as appoved by GE (ii) Three track bottom- Jindal main-2010 section No 20620 or equivalent as appoved by GE (iii) Shutter vertical section- Jindal main- 2010 Section 20606 or equivalent as appoved by GE (iv) Shutter top and bottom - Jindal Main-2010 Section 20604 or equivalent as appoved by GE (v) Shutter vertical middle (interlock) -Jindal Main-2010 section 20605 or equivalent as appoved by GE

Taking down curtain rod and S&F in repair vertical window venetian blind made up with vertical louvers, manually operated, with dust guard features, operataed by wand control system of shade and design as apporved by the engr in charge including all neccesary fittings, opening and closing arrangment, pulling rope etc complete all as specified and directed.

S&F MS rolled section as in framing for shed cladding,glazing, panel framing and the like fixed with angle cleats and connecting plates etc Fe-410-W (gde-E250) Quality B complete all as specified and directed

S&F 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer All as specifed and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed.

S&F factory made solid panel PVC door shutters 30 mm th style size consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail , paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to to the stiles and rails with suitable PVC sheet beading ,and joined together with solvent cement & fix in the frame at site as per specification and drawing complete all as specified and directed.

S&F 150mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F100mm size, butt hinges, medium weight, cold rolled mild steel welded or fixed by screw complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 4.8 mm thick sheet glass ordinary quality in panes not exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

M&L for 4.8 mm thick sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

Demolition of brick or stone boulder masonary built in cement mortar or cement lime mortar including all quions, arches,pillars etc but excluding ashlar facings,dressed stone work s and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight on plan built in cement mortar 1:6 complete all as specifed and directed

M&L for Rendering 15 mm thick on fair faces of concrete /brick surface in cement mortar 1:6 finished fair and even as in wall complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified and directed..

S&F prepainted galvalume(55% aluminium+45% zinc) steel sheet as in roofing 0.50 mm thick(total coated thickness)confirming to AS-1397/ASTM A-792 having tensile strength of 550 Mpa as in roofing,purlingwith self drilling metal coated screw of appropriate size self taping bolt and fixed as per manufactures instruction complete all as specified. sheet shall be laid with one corrugation side lap and end lapminimum 150mm in slope all as per manufactures instruction along with wind ties complete all as specified and directed .

S&F prepainted plain galvalume(55% aluminium+45% zinc) steel sheet as in roofing 0.50 mm thick(total coated thickness)confirming to AS-1397/ASTM A-792 having tensile strength of 550 Mpa as in roofing,purlingwith self drilling metal coated screw of appropriate size self taping bolt and fixed as per manufactures instruction complete all as specified. sheet shall be laid with one corrugation side lap and end lapminimum 150mm in slope all as per manufactures instruction along with wind ties complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) complete all as specified and directed

M & L 75 mm thick for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in subbase for laying floor finishes complete all as specified and directed.

M&L 25 mm thick cement concrete type B-0 (1:2:4) 12.5mm graded aggregate as in sub base for floors complete all as specified and directed.

M&L for precast cement concrete tiles, Stone Finsihed designer tile of size 400x400x30mm thick set jointed and pointed in neat coment slurry in floors with grey cement and no pigment complete all as specified and directed. Make:- NTC Chandigarh or Nitco as approved by GE.

Demolition stone slabs and tiles of any description or thickness in floors, approns etc,laid bedded and pointed in any mortar complete all as specified and directed.

M&L granite stone 12 to 16 mm thick glazed (table rubbed and polished) fixed as in plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of slab and exposed edges rounded with & including 15 mm thick screed bed or beeding layer of mortar 1:4 for laying floor finishes complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

M&L for non-skid coloured ceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0. 06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed

M&L for non-skid coloured ceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed

M&L for non-skid coloured ceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of size 450x350x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 15mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for providing precast concrte type B1 1:2:4 (20mm Graded stone aggregate) in landings, cover slabs (for Manholes etc.) Chullah hoods chajjas, water troughts, mangers shelves and similar article with plain faces sate in cement mortar 1:4 complete all as specified and directed.

M & L for PCC 1:3:6 Type C2 using 40 mm graded aggregate in surface channels and drains complete all as specified and as directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L vitrified coloured tiles 10 mm thick Light shade square/rectangular) area of each tiles but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed.

M&L vitrified coloured tiles 10 mm thick Light shade (square/rectangular) area of each tiles not exceeding 0.36 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified &directed

S&F in repair 100mm dia cast Iron floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and directed.

Dismantling of cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortar and taking out of trenches or floor or wall if required complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) bend 110mm dia , any radius as required and jointed with approved adhesive complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid trenches or in floor complete all as specified and directed.

S&F in repair PVC (SWR) junction, single (Single T) equal or un equal 110mm dia , any radius as required and jointed with approved adhesive complete all as specified and directed.

S&Fixed in repair stainless steel sink with drainage board 1.00 mm thick for kitchen with plug, washer and waste pipe, coupling, washers also including fixing MS/cast iron brackets of suitable length connecting union etc, overall minimum size of kitchen sink 915x460 mm with minimum bowl size 405X355X178mm including waste fitting complete all as specified and directed. Make Blue Star- BSSBSD -52 or equivalent in Hindustan, JAL,Nirali/ Nilkanth/ Jayna

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed.

S&F Waste coupling 32mm bore of PTMT (half or full threaded) suitable for urinals (min. weight 32mm-45gms) complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60gms) complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set in plain cement concrete (1:3:6) type C-1 and connecting to flusing cistern and trap & connecting fittings as required and making good to floor, complete all as specified and directed.

S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging devicecomplete all as specified and directed.

S&F in repair vitreous china corner wash hand basin round of size 400x400x125mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair bib taps brass fancy type, brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair fancy type angular stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair chromium plated brass hand ablution health fauset with 1.50 meter long flexible tube fancy type with necessary brass nuts & rubber washers cover with chromium plated spring complete all as specified and directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed

S&F PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and directed.

S&F in repairs PVC waste pipe flexible type 32mm dia suitable for coupling 32mm,610mm long for WHB/Sink complete all as specified and directed.

S & F in repair tubular towel rail 20mm dia 600mm long of brass chromimum plated complete all as specified and directed

S&F in repair 125 mm size Shower rose chromium plated with arm (Make Prayag /Jaquar/ Hindware) complete all as specified and directed

Cutting chases, pinning in , for concealed water tubing on brick or stone walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

S & F in repair gun metal globe or gate valve with iron wheel screwed both edns for iron pipe of 20 mm dia complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm) complete all as specified and directed.

S&F MS angle iron as in door frame work conforming to Fe 290(Gde E-165) including tie rod, hinges including one shop of red oxide primer etc. complete all as specified and directed.

S&F MS framed work such as grills, guard bars of window, steel covers and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) including one coat of red oxide primer complete all as specified and directed.

S&F aluminium Alloy powder coated windows , ventilators frame with side hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips , frame made with aluminium section as appended below:- (i) Frame : 65x40x1.48mm thick (ii) Top/bottom rail and style / rail of shutter : 44x47x1.48mm thick (iii) Aluminium beading - 0.7mm thick (iv) Aluminium fittings such as peg stay, aluminium hinges, aluminium handle 100mm long , aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

All as per item No 92 above but in repairs.

Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings wooden terminal box plastic laminated sheet cover, from T.W batten including T.W batten or drawing from existing conduit removing all to E/M store yard including T.W batons complete all as specified and directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with GI saddles GI screws, rawal plugs (surface conduit/concealed as per site) including Tee, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size including brass screws on MS/pressed steel terminal boxes with for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch complete all as specified and directed.

All as per item No 95 above for 3 pin 5 Amps socket out let same board , controlled by one switch complete all as specified and directed .

All as per item No 95 above for 3 pin 5 Amps socket out let independent board on different wall controlled by one switch complete all as specified and directed.

All as per item No 95 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete all as specified and directed.

All as per item No 95 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 6 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete complete all as specified and directed.

All as per item No 95 above for bell/buzzer point controlled by one push button on the same board with other switches or independent with cable size 1.5 Sq mm PVC insulated stranded unsheathed copper conductor complete all as specified and directed.

S&F of switch piano flush type 5 Amps single pole one way complete all as specified and directed.

S&F switch piano flush type single pole way 16 Amps complete all as specified and directed.

S&F socket out let 3 pin 6 Amps flush type complete all as specified and directed.

S&F of socket outlet 2 in 1,3 pin, 6 and 16 Amps flush type universal complete all as specified and directed.

S&F of flush type bell push, 6 Amps complete all as specified and directed.

S&F of electric bell ding dong bell as 230 volt AC complete all as specified and directed.

S&F of ceiling rose surface type 65mm x 50mm 2 to 3 terminal complete all as specified and directed.

S&F in replacement of UNSV "E-LITE LED PRIDE PLUS"Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient,20W LED 6000K with accessories complete all as specified and directed. Make: Havells Cat Pt No. LHEXBLP7PN1W020 or equivalent in hillips/Bajaj/crompton Greaves.

S & F in replacement of UNSVf "PLUTO 4X1" 30W 840 4x1 aesthetically designed 4x1 LED flat panel which provides soft-light and glare free symmetrical illumination. also for POP ceilings (supplied with wedge brackets).fixture size in mm (lxWxH) 1200x300x70) with all acecssories (supplied with wedge brackets).complete all as specified and directed. Make: Havells Cat Pt No. LHEWEIP6W1W0300 or equivalent in hillips/Bajaj/crompton Greaves.

S & F in replacement of UNSV recess mounting in built, 36 watt 2'x2' LED ceillihg light fittings with slim line extruded alminium/CACA body, opal acrylic diffuser, electornic driver etc and all accessories pre wired including connecting to source complete, all as specified and directed by Engineer-in-Charge. Make Phillips Cat Pt Mo RC-383B LED 36S-6500/Havells Cat Pt No ENduraslimproplus2X2 PLR 36 W LED 840 MOD/ Crompton Greaves LCTLRN-36-FO-CD

S&F of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed. Make : Anchor/Cona/SSK.

S&F of "ENDURA CITY LITE PLATINUM" energy saving and environmental friendly long life led street light 30W 5700K made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance oF IK07. with acecssorie including GI tubing bracket with provisioning three runs of PVC insulated, unsheated 1100 volts grade single core cable with copper conductors, multistrandard from fitting to Bldg ceiling rose point complete all as specified and directed. Make HAVELLS CAT No ENDURAPEARLSL30WLED757SASYTOPCMP or equivalent in Bajaj/Philips/Wipro as approved by GE

S&F of " ENDURA PEARL PLUS" new generation energy saving and environmental friendly long life led street light 80W 5700K made up of pressure die cast aluminium housing with high power led as lighting source and lens embedded PC cover having toP OPeninG seperate driver compartment with iP66 protection and impact resistance of LK07 with 10KV Built-in SPD with acecssorie including GI tubing bracket with provisioning three runs of PVC insulated, unsheated 1100 volts grade single core cable with copper conductors, multistrandard from fitting to streel light pole /Bldgs DB box to street light GI tubing bracket complete all as specified and directed. Make HAVELLS CAT No ENDURAPEARLPLUSSL80W LED757SASYTOPC with DPD or equivalent in Bajaj/Philips/Wipro as approved by GE

Taking down ceiling fan, cable end, dismantling Ceiling fan, blades and re-fixing its in original position after cleaning all the dust complete. Provision of 3 core PVC insulated sheathed 1100 volt grade flexible cable with stranded copper conductor of size not less than 0.5 sqmm and one meter long from ceiling rose to ceiling fan complete all as specified and directed.

S&F in replacement of UNSV electronic dimmer type fan regulator 450 watt, 250 volts, 50 HZ, AC flush type on the existing phenolic laminated sheet etc, as reqd.complete all as specified and directed. Make : Anchor/Cona/Rider.

Taking down Exhaust fan, cable end, dismantling exhaust fan, blades and re-fixing its in original position after cleaning all the dust complete. Provision of 3 core PVC insulated sheathed 1100 volt grade flexible cable with stranded copper conductor of size not less than 0.5 sqmm and one meter long from ceiling rose to fan complete all as specified and directed.

S&F in replacement of UNSVdouble door sheet metal enclosure for distribution board TPN 415V(when MCB’s to be used) 4 way, 415 Amps rated bus bars and with neutral, Earthing bar and din rail complete all as specified and directed.

S&F in replacement of UNSV double door sheet metal enclosure for distribution board SPN 240V(when MCB’s to be used) 6 way, 100 Amps rated bus bars and with neutral, Earthing bar and din rail complete all as specified and directed.

S&F in replacement of UNSV double door sheet metal enclosure for distribution board SPN 240V(when MCB’s to be used) 8 way, 100 Amps rated bus bars and with neutral, Earthing bar and din rail complete all as specified and directed.

S&F in replacement of UNSV isolator TPN 63 Amps 10 KA 240 volts complete, complete all as specified and directed.

S&Fin replacement of UNSV isolator single pole 5 to 40 Amps 10 KA 240 volts complete, complete all as specified and directed.

S&F in replacement of UNSV isolator single pole & neutral, 5 to 40 Amps 10 KA 240 volts complete all as specified and directed.

S&F in replacement of UNSV MCB Protected socket,4Module with MCB single pole 25 Amps with short Circuit breaking capacity,3kA ,suitable for individual iprotection of home appliances like ACs,Geyser,Microwave etc.complete all as specified and directed.

M&L in replacement of UNSV sub main wiring with two single core FR PVC insulated stranded unsheathed cable with copper conductor of size 4 Sq mm and drawing through in non metallic rigid PVC conduit medium duty ISI marked incl 2.5 Sq mm PVC insulated unsheathed stranded copper conductor cable connected to earth and earth dolly in conduit including connecting to main board including non metallic rigid PVC conduit medium pipe of 25mm dia size complete all as specified and directed.

M&L in replacement of UNSV sub main wiring with two single core FR PVC insulated stranded unsheathed cable with copper conductor of size 6 Sq mm and drawing through in non metallic rigid PVC conduit medium duty ISI marked incl 2.5 Sq mm PVC insulated unsheathed stranded copper conductor cable connected to earth and earth dolly in conduit including connecting to main board including non metallic rigid PVC conduit medium pipe of 25mm dia size complete all as specified and directed.

M&L in replacement of UNSV sub main wiring with four single core FR PVC insulated stranded unsheathed cable with copper conductor of size 10 Sq mm and drawing through in non metallic rigid PVC conduit medium duty ISI marked incl 6 Sq mm PVC insulated unsheathed stranded copper conductor cable connected to earth and earth dolly in conduit including connecting to main board including non metallic rigid PVC conduit medium suitable size of pipe complete all as specified and directed.

M&L in replacement of UNSV LED Post top of lantern 35 watts complete with all accessories including connecting the fitting to control switch box at the bottom of the pole/walls with using 2.5 Sqmm two run of single core FR PVC insulated stranded unsheathed cable with copper conductor cable including and drawing through in non metallic rigid PVC conduit medium duty suitable size complete all as specified and directed. (Make :Havells cat part No- CORALPT25W LED 757 PSYMTOPC or equivalent model of Bajaj/ Crompton Greaves/Philips/C&S).

35. M&L for earthing complete for bldg/poles with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completioncomplete all as specified and directed. Note :- NOTE : RCC pit cover shall be pre-cast of RCC (1:2;4) type B-1 80 mm thick reinforced with XPM weighting not less than 4 Kgs/Sqm in lieu of CI cover.

Gaur Construction Co

AKANSHA.ASSOCIATES

M/s Arora Sales Corporation

sagar associates