Const. of Govt. ITI at village Naggal (Hasanpur) in Distt. Ambala (Pdg. Motor Power Wiring).

Amount

( c ) Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. HSR No. 31.12 c (i)

100 amp.to 220 amp.415 V,10 KA 3-phase. HSR No. 31.12 c (ii)

S/E of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm. HSR No. 31.13(ii)

M.S.Sheet . Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. HSR No. 31.14 (i)

(L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. TP MCB of 9 KA breaking capacity 40 amp. to 63 amp. HSR No. 31.17(a) (iii)

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR No. 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR No. 31.22(ii)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22(xii)

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HSR No. 31.22(xvi)

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. HSR No. 31.22(iii)

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. HSR No. 31.22(v)

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22(xi)

Pdg. and fixing 25 mm x 5 mm GI strip on surface or in recess for connections etc. as required with all labour and material. HSR No. 31.22(xv)

Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. HSR No. 31.22(xix)

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 16 Sq. mm 4 Core Cable . HSR No. 31.26 (xI) Ard.

25 Sq. mm 4 Core Cable . HSR No. 31.26 (xIi) Ard.

50 Sq. mm 4 Core Cable . HSR No. 31.26 (xIiii) Ard.

95 Sq. mm 3.5 Core Cable . HSR No. 31.26 (xxix) Ard.

185 Sq. mm 3.5 Core Cable . HSR No. 31.26 (xxxii) Ard.

S/E of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . HSR No. 31.28 (ii)

25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR No. 31.28 (iii)

70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . HSR No. 31.28(iv)

120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core HSR No. 31.28 (v)

Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 8-way, TP & N (Vertical) (8+24) HSR No. 31.41 (vii)

12-way, TP & N (Vertical) (8+36) HSR No. 31.41 (vii)

Supply and erection of MS sadles and clamps on wall / RCC parapit for fixing underground cable at at distance of 0.60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect. HSR No. 31.48

Supply and erection of MS stand made of 50cm×50mm×6cm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below, ground level including the cost of cement sand welding, painting & fabrication charges etc up to the entire satisfaction of the Engineer-in-Charge of work HSR No. 31.51

Supply and erection of PVC pipe ISI marked (Medium) recessed in wall/ceiling etc including the cost of PVC bends inspecion boxes, iron hooks and cement concrete etc complete in all respect upto the entire satisfaction of engineer-in-charge of work PVC pipe of 40 mm dia HSR No. 31.58

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. HDPE Pipe 145/123 outer dia / inner dia. HSR No. 31.67 (iii)

S/E of Module case circuit breaker single pole / 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. 4 pole MCCB 200 amp HSR No. 31.69 vi

4 pole MCCB 300 amp to 400 amp HSR No. 31.69 vii

Load Bank 8 way 400 Amp. HSR No. 31.75 iv

S/E of cable tray made gut of 2mm thick galavanised perforated sheet steel including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. 40 x 100 mm HSR No. 31.81 i

50 x 150 mm HSR No. 31.81 ii

50 x 300 mm HSR No. 31.81 iii

S/E of factory manufactureed cable tray cover made of 16g GI Sheet complete with Fastoner Nuts bolts and in position including all petty material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. Suitable for 40 x 100 mm HSR No. 31.82 i

Suitable for 50 x 150 mm HSR No. 31.82 ii

Suitable for 50 x 300 mm HSR No. 31.82 iii

Supply & erection of enclosure for MCCB 32/63 Amp. (Indo asian make) Complete with labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. (similar make of L&T, Havells & Standard). NS- 1

M R CONSTRUCTION COMPANY