Installation of 2 Nos. Installation of 5K Wp On Grid Roof Top Solar Power Plant at Luksan GP ID 127209236

WRI&DD SCHEDULE, - 2 Module Mounting Structure: Supply, transportation & Installation of Gl manual tracking/ Fixed structure made of MS Hollow Section, Pipes, Plates, angles etc as per IS4923, IS: 1161/1239, IS: 1079/2062, to hold min 300Wp SPV Module as per drawing and technical specification. The steel structure is to be protected with minimum 80 micron galvanization (hot dip) and provided with fixed arrangement of dual axis manual tracking arrangement for three times in a day and seasonal liltin to face the sun o timall

WRI&DD SCHEDULE, Cham er-12.OO, Item - 1 b) Solar Module: Supply, transport, installation and commissioning of ISI marked solar module as per following specification. 1. Cell: Indigenous mono crystalline silicon SPV cells. 2. Solar Module: Monocrystalline cell with PERC technology/module with bifacial cell 3. Standards: ISI marked as per IS 14286 and having certification of IEC 6183(1), 61710 4. Modules must quality to IS 170210(Part 1) 5. Min efficiency 19.5% 6. Fill factor: More than 75% 7. Module wattage mismatch in the SPV array: within +3% 8. Wattage output warranty: Should be less than 90% at the end of 10 years and 80% at the end of 25 years. 9. Power output of individual PV modules used in the PV array, under STC minimum 300Wp. Necessary test certificate also to be supplied. For detail information please see cl. No 2.1 of technical specification. 540x96=51840W

UDMAD SCHEDULE,Pa e- 57 / Item - la supply and delivery of (ABB/L&T/KACO/POWER ONE Make) grid invertwer Input voltage range Nor:- 90 290V / UPS:- 180 - 260V/ Eqp 140 - 290V with PCU Switching elements MOSFET Type of Charger PWM with MPPT technology Input from PV 520V max to 200V DC, 5000W, Single Phase with protection Short circuit, Deep discharge, Input surge Voltage, over current, Battery reverse Polarity, Solar array reverse polarity Dielectric strength 1.1 KV between input/output and ground with EMI protections removed. Cooling Forced with temperature sensitive fan operation Ambient temperature 50 degree Celsius (Max) Operating Humidity 95% maximum Assembly/ Mounting as per normal industrial practice Finish Epoxy Power Costing' Cable Entry from rear, preferably 200 mm above ground level all system parameters shall be displayed System jarmneters LCD dis la such as batter volta e out out

Supply, and of ARRAY BOX / DC MCB BOX certlfiecl as per 61439-1 standald up-to operating voltage {s'lven bellow 'I'he enc losure is Inade of high quality polycall)onatetnaterial. l)egree 01 1)' Otection IP-65/66 The enclosut@' is acwessil)le only via the use of tools Ill order to ensure the l' ailorIliade product custonnsed as per need Blocks the reverse flow of cu rrenttrolli AJ13 to solar panels(Make: HPL L&T/CGL/EXIDE/POWER ONE). 500V 6 in 1 Out single phase include lightning protection device as oer standard

PWD E) SCHEDULE,Pa e - G-1,2 c Earthmg with 65 mm diaGl pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S& F 65 mm diaGl pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and artl above round level to an avera e de th of 3.65 Mts

Connecting the equipments to earth busbar including S &F Gl (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts,

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on

Supplying and fixing PVC Rigid Conduit 'FRI [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 20mm size

Supply & Fixing Information Sign Board 500x300mm fabricated with MS Sheet 16SWG and ISA frame 25x25x4mm including Painting and lettering with approved paint as per instruction of authority.

Finishing ot- the PVC instilated wire ends by with pin ring tvpe copper so€lets insulated ta pes etc., Including supplying soclqets, tapes

Supply and fixing MC4 copper connector Mail-FemaJe as per standard specification

Supply & Installation of BATTERY Lead Acid, tubular positive plate flooded electrolyte or Gel / VRLA Type. The battery will have a minimum rating of 12V, 100 Ah at C/ 10 discharge rate. 3. 75 % of the rated capacity of the battery should be between fully charged and load cut off conditions. iv. Battery should conform to the latest BIS/

Supply & Fixing BATTERY reck for above tublar battery maid with MS Angle of requiste size as per specification including paining with two coat of enamel pain over red

CGST @9% and SGST @ 9%