SPECIAL REPAIR TO B/R TOILET BLOCK IN OTM ACCN OF 23 FD REGT AND VARIOUS OTM ACCN OF 314 FD HOSP AT CLEMENT TOWN

Amount

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in any type of soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc and getting out complete all as specified and directed.

M&L for returning filling in any type of soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed

M&L for removing excavated material (any type of soil) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in CM 1:1, incl demolition and breaking up drain pipes (SGSW) of 150mm bore complete all as specified and directed

M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed

M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed

M&L Cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations or mass concrete complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed

M&L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) in surface channels and drains and finished the surface even and fair complete all as specified and directed

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces with using WPC @3% by weight of cement, finishing the surface even and smooth without using extra cement complete all as specified and directed Note : Water proofing compound will be measured and paid separately

Supply only integral waterproofing compound (Powder) complete all as specified and directed

M&L for reinforced precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in CM 1:4 complete all as specified and directed Note : Reinforcement shall be measured and paid for separately.

S&F mild steel framed work as in manhole cover frames conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F for 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

S&F for 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

S&F 15 mm bore dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed

S&F 20 mm bore dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed

S&F 15mm dia brass chromium plated Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule with wall flange complete all as specified and directed.

S&F 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed. Make : Prayag/Shakti/Pearl

S&F vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed. Make : Cera/Hindware/Parryware

S&F vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified and directed. Make : Cera/Hindware/Parryware

S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed. Make : Make : Cera/Hindware/Parryware

S&F triple layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

Demolition in cement concrete (unreinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base , finish the top surfaces even and rough to receive top layer complete all as specified and directed

M&L for coloured Glazed ceramic tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directed

M&L for 100mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed

S&F cast iron 'P' Traps 100mm bore complete all as specified and directed.

S&F 100mm bore cast iron bends (any radius ) with duck's foot or heal rest complete all as specified and directed.

S&F 100mm bore cast iron tee diminishing pieces or tapers fitted with oval access doors complete all as specified and directed.

M&L for 75mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed

S&F 75mm bore cast iron bends (any radius ), diminishing pieces or tapers fitted with oval acceess doors complete all as specified and directed.

S&F cast iron floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in cement concrete type B1 (1:2:4) and SS gratings complete all as specified and directed.

M&L for 50mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed

S&F Cast iron cowls 50mm complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa and 150 AZ as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old asbestos cement sheets complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa and 150 AZ as in roof covering/cladding to wall, ridge etc fixed with self tapping screws incl dismantling of old asbestos cement sheets complete all as specified and directed.

Excavation in post hole (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in any type of soil complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (Using 40mm graded stone agrregate ) as in foundation of posts, railing and similar work complete all as specified and directed.

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F welded steel wire fabric weight n. exc 4 Kg per Sqm suitable to weld with steel members complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone msonary wall including racking of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for applying two coats of cement base paint after preparation of newly plastered/concrete surfaces complete all as specified and directed.

M&L for 5mm thick plaster in ceiling of CM 1:3 on brick walls finished even and smooth without using extra cement incl taking down cement plaster from ceiling including scrubbing down with water etc complete all as specified and directed.

M&L for prepration of new plastered surface and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described and applying two coat of synthetic enamel paint over 10cm width or girth complete all as specified and directed.

M&L for 16 -18mm thick Granite of approved quality machine cut, bedded and jonted with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick screed bed in CM 1:6 including grinding/chamfering and polishing the edge complete all as specified and directed.

Repair to false ceiling and refixing of snap grid and ceiling board including straitening of hanging wire etc complete all as specified and directed. NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. 2. Unless otherwise specified the rates for PCC/RCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

Saurav Enterprises

Alankar Traders

BHAGAT JI ENTERPRISES

AMARJEET SINGH AND CO.

M/s RK ENTERPRISES

RADHA ENTERPRISES

M.K Engineers