DEPOSIT-Medical College Chest Hospital MDRTB Ward-Modification works at ward 12 to set up MDRTB ward -General Electrical Work

Amount

Electrification and providing Exhaust Fan

OD15939/2023-2024:Supply, conveyance, installation ,tesing and commissioning of DIRECT DRIVE CABINET FAN of 3500 CFM capacity WITH 1 HP SINGLE PHASE MOTOR CDIF series with high grade accoustic insulation with single phase squirrel cage induction motor and standard speed control, IP 20 protection. Machine have single skin cabinet with G.I or epoxy powder coated, mounted on ceiling with suspension arrangements using thread rods/angle iron in position. Preferred makes : system air/Krugger/ Caryaire or equivallent with similliar properties

OD15922/2023-2024:SITC of heppa filters of 99.97% efficiency down to 0.3 Micron of ''1800&1700'' CFM capacity size 540X540X300

OD15923/2023-2024:SITC of micro filters of 99% efficiency down to 5 Micron of ''2800&2500'' CFM capacity size 540X540X300

OD15988/2023-2024:SITC of air prefilters with efficiency 90% down to 10 microns and 99% down to 5 microns with capacity 3500 CFM size 1000X300X50

OD15979/2023-2024:Supply, Installation, testing and commissioning UV chambers with Control panel suitable for connecting with ductable units

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

OD174143/2022-2023:Supply and fixing of following Powder coated Aluminium Linear Grills complete without volume control dampers

OD174144/2022-2023: Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting (in accordance with SMACNA standards)complete with neoprene rubber gaskets, elbows, splitter dampers, bends, transformations, vanes, , inspection doors , plenums hangers, supports, angle iron flanges , Hi Tech/ Hilti GI supports, GI full thread rods , anchor bolts ,GI nuts and bolts etc as per approved drawings and specifications of following sheet thickness complete as required. Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 22 SWG( 0.3973mmthick)

OD174145/2022-2023: Supply and fixing of following thickness Acoustic Lining of ducts using open cell 10mm thick Nitrile foam anti-microbial closed after applying cold setting adhesive as per recommendation of the manufacturer.

1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

90.11.1.10:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)

90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.1:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

OD246060/2022-2023:Supply and installation of DP enclosure for independent mounting of MCB/ RCCB/ RCBO/ isolator with 6A to 32A DP MCB

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

OD17215/2023-2024:Supplying and fixing 40 A to 63 A, TP MCB (C curve), 10 kA breaking capacity, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

90.9.2.1:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid

90.9.2.8:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap

SHARJAS A

E R ANANDAN

cristalcool

Bidder Name

PONNU HYLINE

cristalcool

E R ANANDAN

SHARJAS A