Construction of Garage building for insulated Bucket Truck at 220 kv sub station Ladhowal

Amount

Earthwork in excavation in foundations in all kind of soils where pick jumper work is not involved and not exceeding 2 m depth

Shuttering for faces of concrete foundations and beam and plinth

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

Cement concrete 1:8:16 with stone aggregates 40 mm mixing by mechanical means

Cement concrete 1:6:12 with stone aggregates 40 mm mixing by mechanical means

PCC 1:2:4 ratio cement coarse sand and crusher by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-20 mechanically batch mixed using batch type mixture in foundation and plinth

Reinforced cement concrete M-20 mechanically batch mixed using batch type mixture in superstructure

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

20 mm thick cement plaster 1:5

12.5 mm thick cement plaster ouside 1:4

40 mm thick DPC 1:2:4

Finishing walls with cement based water soluble cement based paint such as snowcem two or more coats to give even shade

Distempring with dry distemper of approved brand two or more coats to give even shade

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. Labour Rate Only

Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick

Providing and fixing ball bearing for push and pull type rolling shutters, from 9.20 to 12 sqm area

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span

P/F ventelator as per detail attached

P/F sheet roofing of TATA durashine or equivalent

Compacting original ground below road crust Loosening, leveling and compacting original ground up to a level of 500mm below road crust, mixed with water at OMC, levelled, graded and compacted in layers by rolling so as to achieve minimum dry density

Cement concrete 1:4:8 with 40 mm stone aggregates

Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall 1.5sq. mm, 1100volts wiring light point

wiring 6 Amp wall socket point

wiring 16/20 Amp power plug control point

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size. Overall size 2.5 sqmm

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size. Overall size 4 sqmm

Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II 25 mm dia

Supplying and Erection of Miniature circuit breaker single pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply 0.5 TO 4 Amp

Supplying and Erection of Miniature circuit breaker single pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply 50 to 63 Amp double pole

Supply and erection of sheet metal Double Door Distribution Boards. SP&N Double door distribution board 8 way each

Supplying and fixing general purpose tube fitting of Crompton make 1x28W as per NS item.

Supply and fixing concealed tube fitting with hanging 2 no rods

Extra carriage and diffrence of rates Crusher 11.2 mm

Extra carriage and diffrence of rates CRUSHER 13.2 MM

Extra carriage and diffrence of rates Coarse sand

Extra carriage and diffrence of rates fine sand

Extra carriage and diffrence of rates stone metal

Extra carriage and diffrence of rates cement

Extra carriage and diffrence of rates steel works

Extra carriage and diffrence of rates Bricks

Extra carriage and diffrence of rates Steel

KK CONSTRUCTION

om namah shivay construction co.