CERTAIN REPAIR SUCH AS JOINERY, SANITARY FITTINGS, FLOORING, PLASTERING ETC IN DOMESTIC AREA AT AF STN HALWARA

Amount

Taking down cement plaster of any description and thickness including raking out joints hacking for key scrubbing down with water etc complete all as specified.

Demolition of brick work as in walls/parapet walls removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces all as specified and directed

M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per Sl item No 3 above but except bricks Note : Old serviceable bricks obtained from Sl item No 2 above shall be reused in the work after cleaning of bricks.

M&L for 15 mm thick rendering in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of distemper oil emulsion over a coat primer over 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and applying one coat of distemper oil emulsion complete all as specified and directed

M&L for complete removal of existing treatment from old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and applying two coat of distemper oil emulsion over a coat primer over 1 to 2mm thick wall care putty complete all as specified and directed

M&L for 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound as per manufacturers instructions on brick or concrete surface finished fair and even without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately as supply only under respective items of this BOQ.

M&L for prepration of new plastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed

M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint on walls complete.

M&L for preparation of old decorated surfaces of walls and applying one coat of acrylic exterior emulsion paint of shade as approved by GE complete all as specified and as directed.

M&L for prepration of old plastered surfaces of wall and applying one coats of weather proof emulsion paint complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) furnished even & smooth without using extra cement as in ceiling complete all as specified and directed.

M&L for prepration of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for repration of old decoreated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles (300x450mm)x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Non skid jointless cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment complete all as specified and directed.

M&L for Non skid jointless cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment

All as per Sl item No 20 above but as in vertical surfaces as Dado/Skirting including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for rough finished surfaces to receive tiles complete all as specified and directed.

M&L for vitrified ceramic coloured tiles 10 mm thick (Square/rectangular) area of each tile n.exc 0.36 Sqm set in neat cement slurry and pointed in white or coloured cement with pigment complete all as specified and directed.

All as per Sl item No 22 above but as in skirting, dados/Vertical surfaces over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for rough finished surfaces to receive tiles complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar (1:6) as in floor for laying floor tiles complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm but n-exc 4 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame area not exc 1.5 Sqm each complete all as specified and directed.

Taking down shutter from the frame area exceeding 1 sqm but not exceeding 2 sqm each all as specified and directed.

S&F 1.25mm thick Pressed steel frames of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc. complete all as specified. Note : Cost of 06 No butt hinges 100mm long per door frame is deemed to be included in the rates of door frame and nothing extra shall be admissible on this account.

S&F 1.25mm thick pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, hinges, lock strike plate, hold fast etc. complete all as specified. Note : Cost of 03 No butt hinges 100mm long per door frame is deemed to be included in the rates of door frame and nothing extra shall be admissible on this account.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregates) as in hold fast , back filling of pressed steel frames etc complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln seasoned and chemically treated complete all as specified.

S&F 35 mm thick 2nd class hard wood glazed or skelton shutter factory made open rebated and prepared to receive glass, gauge etc.(without sash bars) edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.24 (a) of SSR part-I complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube , suppling but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet and fixing in opening as per specification and drawing complete all as specified and directed. .

S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail,MS frame shall be covered with heat moulded wood grain printed PVC sheet used & 5mm thick & 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mmx10mm (90 Deg) used instead of exposed portion of PVC sheet beading and fixing in the frame and site as specification all as specified.

S&F stainless steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tined tacks or galvanised wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tined tacks or galvanised wire staples complete all as specified and directed.

S&F 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified.

S&F in repair 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified.

S&F 150mm size(overall length of cover plate) floor doors stoppers of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

All as per Sl item No 39 above but fixed in repairs.

S&F 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specifie and directed,

All as per Sl item No 41 above but fixed in repairs.

S&F 150mm size Aluminium handles cast type anodised complete all as specified and directed.

All as per Sl item No 43 above but fixed in repairs.

S&F in repair 300 mm long aluminum alloy,anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

All as per Sl item No 45 above but fixed in repairs.

S&F mild steel 300mm helical door spring , ordinary rat tail rod patteren including roller and roller plate fixed to wooden frame or welded to steel frames complete all as specified and directed.

All as per Sl item No 47 above but fixed in repairs

Preparation of new wood or wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for prepraration of old decorated surfaces of wood or wooden over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed..

M&L for prepraration of old decorated surfaces of steel over 10cm width or girth and applying one coats of synthitic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

Supply and laying CPVC pipes outer diameter 20mm SDR 11 & plain CPVC SDR 11 fittings laid in trenches or fixed to walls, floors & ceilings including cutting and chases complete all as specified and directed.

S&F in repair15mm bore stop cock fancy type chromium plated with long shank and cup (concealed type) complete all as specified and directed .

S&F in repair15mm bore bib tap cast copper alloy fancy type CP with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complte all as specified and directed.

All as per Sl item No 59 above item but 20mm bore

S&F in repair 20mm size Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specifed and directed.

S&F in repairs 15mm bore Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms ) complete all as specified and directed.

S&F in repairs 15mm size PVC connection 600 mm long, 15mm size with PTMT nuts complete all as specified

S&F in repairs 10 Ltrs capacity PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and directed.

S&F in repair 15mm bore swivel shower with shower arm CP fancy type completge all as specified and directed.

S&F in repair vitreous china wash basin, white flat back size 550x400mm excluding taps, waste chain, waste pipe and plug and proclain stopper but including bracket complete all as specified and directed.

S&F in repair 15mm bore Pillar taps fancy type of PTMT any colour high pressure scrwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete all as specified and directed.

Demolotion of stone slabs and tiles of any description or thickness Laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

M&L for granite slab (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including 15mm thick screed bed of cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation as directed .

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete alll as specified and directed.

S&F 75 mm bore PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F PVC (SWR) bends 110 mm bore

S&F PVC(SWR) bends 75 mm bore.

S&F PVC(SWR) junction double, (Single T),equal or unequal. 110 mm bore

S&F PVC (SWR) vent cowl 110 mm bore

S&F PVC (SWR) vent cowl 75 mm bore. Note For Sl item No 72 to 79 : The work is to be executed in multi storied buildings upto 4th floor.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F PVC (SWR) bends 110 mm bore

S&F PVC(SWR) bends 75 mm bore.

S&F PVC(SWR) junction double,(Single T),equal or unequal. 110 mm bore

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed. Note For Sl item No 80 to 87 : The work is to be executed in multi storied buildings from 5th floor to 8th floor.

S&F in repairs 100mm outer dia PVC (SWR) floor trap with CP grating including jointing to waste pipe with cement solvent complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specficially provided for complete all as specified and directed.

M&L for Precast RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) as in cover slab for tank staging, manhole cover and similar article with plain face, set in cement mortar 1:4 complete all as specified and direceted.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling AC/fibre glass translucent corrugated or semi corrugated sheet including ridges, hips, valley etc of any description and thickness in roof coverings all as specified and as directed

S&F in repairs Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165) complete all as specified and as directed

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws complete all as specified and as directed

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description all as specified and as directed

S & F Anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm including hangers, cleats, fasteners complete all as specified and as directed

S & F Gypsum Board 8mm thick in ceiling fixed with screw as per manufacturers instructions, 60x60cm in size all as specified and as directed

S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed by Engineer-in-Charge.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.

S&F 0.63 mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F factory made Box type steel window, double shutter, glazed and wire gauzed with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. (ii) Glazing & Wire cloth shall be measured and paid separately . (iii) MS guard bars shall be measured and paid separately as supply only. (iv) Double shutter meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively. Both the shutters shall be measured as one unit.

Supply only framed work such as grills, gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars complete all as specified and directed.

S&F Powder Coating aluminium frame for doors, windows, (minimum thickness of powder coating 50 micron) ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 Kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, handles 2 Nos in each door,tower bolt, hinges, anodised aluminium snap beading screws complete all as specified and directed.

S & F Powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/fixed type without sash bars, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21 100 mm long 2 Nos, suitable handle 1 No complete all as specified and as directed .

Supply and fixing Anodised aluminium grill (anodised tranparentor dyed to required shade according IS : 1868/ pattern, with approved standard section and fixed to the existing window frame with CP brass stainless steel screws @200 mm centre to centre including cutting the grill to proper opening size for fixing and operaton of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

S&F 18/19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame work including teak wood lipping 6mm thick on external surfaces all as specfied and directed.

S& F 1st class hard wood moulding of size sectional area exc 6 sqcm and n.exc 13 sqcm as in cornices, picture rails and the like complete all as specified and directed.

S & F 40 mm flap width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S& F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe including making goood to floor etc complete all as specified and as directed

S&F in repair vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest excluding flishing cistern and flush pipe complete incl. provn of cement concrete bedding.

S&F in repairs CP Toilet roll holder with flap complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-0 using 12.5mm graded crushed stone aggregate as in sub base finished even and fair surfaces without using extra cement complete all as specified and directed.

S&F in repair 1000 Ltrs capacity rotational moulded polyethylene water storage tank (Double layer wall construction) (cylindrical vertical with closed top) hoisted including 20mm ball valve and fixed in position all as specified and directed.

All as per Sl item No 117.00 above but 750 Ltrs capcity.

All as per Sl item No 117.00 above but 500 Ltrs capcity.

All as per Sl item No 117.00 above but 250 Ltrs capcity.

S & F in repairs harrison rails, anodised alluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F in repair Stainless steel sink with draining board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm all as specified and directed.

Supply & fixing in repair 15mm bore dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

M&L for welding butt hinges and door spring in any situation and at any floor including taking down shutter and refixing in same opening and making functional complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.

S&F Factory made single extruded WPC (wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-90 (Suspension Grade), Calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minium frames density of 750 Kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edgn minimum compressive strength of 58 N/mm, mokules of elasticity 900 N/mm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required MS hold fast / lugs/ SS dash fasteners of required dia and length complete as per diredtion of Engineer-in-charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

Easing of door shutter/window shutter of any size for smooth opening, tightening of hinges, adjustment of tower bolts, sliding bolt etc complete all as specified and directed.

Cleaning and removing with bleaching powder to all scale, sludge, mud, algae and dirt etc from tanks capacity upto and including 1000 liters and from mouths of circulating pipes etc and washing with clean water including writing in words with synthetic enamel paint as CLEANED ON (date) all as directed by Engr-in-Charge.

S&F in repair PVC bathroom cabinet mirror size 350mm x 450mm complate all as specified and directed.

S&F in repair plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respects all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed.

M&L 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.50 Sqm in each pane complete all as specified and directed.

Demolition for cement concrete exc 15cm thickness as in sunken floors and getting out complete all as specified and directed. .

M&L for cement concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate) as in sunken floors complete all as specified and directed.

M&L for applying two coats of SHALIMAR SUPERCRETE /NITOBOND water proofing coating on the entire surface of sunken portion complete all as specified and directed .

M&L for 50mm thick louvers and jallies precast cement concrete (1;2:4) type B-1 using 20mm graded stone agregete (measured solid) set in cement mortar 1:4, including all mouldings but excluding frame (Pre cast frame shall be measured separately) complete all as specified and directed.

M&Lfor PCC (1;2:4) type B-1 using 20mm graded stone gregete as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

S&F 32mm dia G I pipe, medium grade, 450mm long beveled cut at both ends, fixed by making hole in walls sunken portion approx above the R C C slab and ceiling, finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified and directed.

Cutting holes into or through brick walls (superficial area not exc 150 sqcm) built in cement mortar and making good in cement mortar 1:3 or cement 1:2:4 type B1 complete all as specified and directed.

S&F in repair Stainless steel kictchen plate rack of size 90cm x 90 cm x 25cm including all fixing screws of stainless steel complete all as specified and directed. Note : Weight of the plate rack shall not be less than 6.00 kg.

S&F in repair glass shelf bathroom corner having radius 300mm minimum including fixing arrangement complete all as specified and directed.

M&L for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm (if required) with or without facia and finished with cement mortar 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm including necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete all as speciified and directed.

Supply only Integral waterproofing compound

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness below or above ground level & removal out side MoD land complete all as specified and directed.

M&L for 40mm thick PCC(1:2:4) type B1, (using 20mm graded stone aggregate) finish even and smooth with using extra cement complete all as spd.

M&L for 75 mm thick PCC 1:3:6 type C2 as in plinth protection/floor sub base etc finished even and smooth without using extra cement complete all as specified and directed.

M&L rubber finish chequered cement concrete tiles 30cmx 30cmx 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6 etc complete all as specified and directed.

M/S SANGA SINGH AND CO

BEHL AND COMPANY

M/S Shyam kumar mehta and co