Construction of New 2 Court Building at Kwant Ta. Kwant Dist. Chhotaudepur (Providing, Fixing and arranging Furniture)

No. Figure Amount

1 Providing and Arranging dias chair having overall height of 1.52 mt made from 4.00 No. 5282.30

Indian teakwood having Back leg size 50mm x 50mm, Back Support 75mm x 35mm

size, handle 75mm x 30mm size, Back Logo (National emblem) made from bronze

metal of size 150mm x 30mm to be fixed on wooden back of size 225mm x 35mm

Indian teakwood frame work. All the wooden members to be moulded as per the

approved design and as diretced by Engineer in charge. Seat having 80mm (3")

thick 40 density foam to be fixed on 12mm thick MR grade plywood and back having

50 mm (2") thick 40 density foam bottom, back and seat foam both with high quality

fabric (Basic Rate Rs.400/Rmt) of approved shade. All wooden members finished by

melamine polish Including all materials and labours etc. complete as per drawing

and instruction of Engineer-in charge. Dias Chair : Overall Size : [0.635 x 0.610 x

1.52 (H)] mt (Armrest 0.63 Mtr)

2 Providing And Arranging table for judge chamber having overall thickness of top 2.00 No. 30686.83

40mm (18+18+4mm) 18mm thick MR Grade plywood and 4.00 mm thick veneer at

top with melamine polish finish including 8mm thick back painted glass. Top to be

made from 75mm x 50mm Indian teak wood with half round moulded on long side

with melamine polish. Leg 50mm x 50mm x 1.6mm thick CRCA Square pipe and

supporting pipe 50mm x 25mm x 1.8mm finishing with epoxy powder coated

micron with leveller. Appron having 18mm thick MR Grade plywood with 4mm thick

veneer having melamine polish finish. Drawer Unit (450 x 550 x 600)mm having all

Structure 18mm thick MR grade plywood with veneer and teakwood border of

specified size with melamine polish finish. Drawers (3 No.) slides on Ebco make

telescopic channel with Godrej make lock with two keys and necessary fixtures and

fastening as approved with balancing laminate inside 0.8mm thick of approved

shade including all materials and labours etc. complete as per drawing and

instruction of engineer-in charge. Side Unit to be provided saparetly.

Judges Chamber Table size : 2100mmx 900mmx750mm (H)

3 Providing and Arranging side unit with top 40mm overall thickness made from 18mm 4.00 No. 8629.44

thick MR grade plywood with 4mm thick veneer on top with melamine finished polish.

Side and drawer made of 18mm thick MR grade plywood with 4mm thick veneer with

melamine finished polish and inside 0.8mm thick balancing laminate of approved

shade. Teakwood border with melamine finished polish of specified size to be

provided all around the borders of plywood. Drawer run on Ebco make telescopic

channel with Godrej make lock with Two keys and shutter fixed with auto hinges

incld. all necessary fixtures and fastening as approved and back of the unit with

6mm thick MR grade playwood with 0.8 mm thick laminate of approved shade with

nylon bullet including all materials and labour etc. complete as per drawing and

instruction of Engineer-in charge. Side Unit size : 900mm x 450mm x 750mm (H)

4 Providing and Arranging book storage having top 18mm thick MR grade plywood 10.00 No. 12160.40

with 4mm thick veneer melamine polish finish with 0.8mm balancing laminate.

Shelves made of 12mm thick clear float glass with all edge polish. Side and shutter

made of 18mm thick MR grade plywood with 4mm thick veneer melamine polish

finish with 8mm thick clear float glass and Lock and nylon bullet including all

necessary fixtures and fastenings as approved, including all materials and labours

etc. complete as per drawing and instruction of engineer-in-charge (With teakwood

border patti with melamine polish). Glass Book Storage : 900mm x 450mm x

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

5 Providing, Arranging & fixing wooden coat stand made of Indian teakwood, vertical 2.00 No. 2249.27

member 65mm x 65mm size and bottom cross design teakwood member of 75mm

(H) x 37mm as per design with melamine polish including moulding edges with

teakwood single hanger of standard size (75mm x 35mm) along with 2 nos. brass

hook, including all materials and labours etc. complete as per drawing and

instruction of engineer-in-charge. Coat Stand: 650mm x 650mm x 1500mm (H)

6 Providing and arranging PREMIUM EXECUTIVE REVOLVING CHAIR (High Back) 2.00 No. 20073.75

Sigma chrome Base with Knee Tilt Synchro Mechanism with Any Position back Lock,

Seat & Back - Made from High Density U - FOAM, Arms - Aluminium Die Casted

with Cushion Pad. Including all materials and labour etc. complete as per drawing

and instruction of engineer-in-charge. Size : max. Height : 1290mm to Min. 1170mm,

Seat : 530mm x 520mm, back 740mm x 500mm. HOF or Equivalent make

7 Providing and Arranging fix chair having structure of CRCA M.S. pipe 20mm dia. and 75.00 No. 5252.00

16 guage with 50 micron powder coated of approved seat and back 40 density PU

foam covered with fabric of approved shade and texture with one year replacement

warranty. Wooden armrest to be provided as per approved design. Complete chair

should be in suitable shape including all materials and labours etc. complete as per

drawing and instruction of engineer-in-charge. HOF or Equivalent make

8 Providing and Arranging three seater wooden sofa made from Indian teak wood with 4.00 No. 26030.73

melamine polish. Seat made from 100mm thick 40 density foam with 25mm thick

supersoft HD covered for softness. seat to be kept on high density nylon elastic belt

inside Framing size 50mm x 37mm support armrest, legs and outer frame having

size 80mm x 37mm with inner brace between armrest and seat frame having size

25mm x 50mm as showing the photographs. Back 80mm thick 40 density foam with

12mm thick supersoft HD covered for softness. Seat and back covered with high

quality fabric approved shade and wooden armrest Including all materials,

hardwares and labours etc. complete as per drawing / photographs & detail and as

directed by Engineer-in-charge. HOF or Equivalent make

9 Providing and arranging single seater wooden sofa made from Indian teak wood with 6.00 No. 14278.37

melamine polish. Seat made from 100mm thick 40 density foam with 25mm

supersoft HD covered for softness. Seat to be kept on high density nylon elastic belt

inside framing 50mm x 37mm support. Outer frame 80mm x 37mm. Back made from

80mm thick 40 density foam with 12mm thick supersoft HD covered for softness.

Seat and back covered with high quality fabric approved shade and wooden armrest

including all materials and labours etc. complete as per drawing / photographs &

detail and directed by Engineer-in-charge. HOF or Equivalent make

10 Providing and Arranging tea table made from 37mm x 37mm size Indian teakwood 2.00 No. 3839.01

leg and top frame made from 37mmx 75mm Indian teakwood having 18mm thick Ply

and 4mm thick Veneer with melamine polish and 0.8mm thick balancing laminate at

bottom for shelf made with surrounding Indian teakwood frame of size 37mm x

12mm. The top having 12mm thick frosted glass with edge finish to be placed

properly in groove made. Surface to be finished with melamine polish including all

materials and labours etc. complete as per drawing and instruction of engineer-in-

charge. Tea Table : size - 900mm x 600mm x 450mm

11 Providing and Arranging tea table made from 37mm x 37mm Indian teakwood leg 5.00 No. 2868.40

and top frame made from 37mmx 75mm Indian teakwood having 18mm thick Ply

and 4mm thick Veneer with melamine polish and 0.8mm thick balancing laminate at

bottom for shelf made with surrounding Indian teakwood frame of size 37 mm x

12mm the top having 12mm thick frosted glass with edge finish to be placed properly

in groove made. Surface to be finished with melamine polish Including all materials

and labours etc. complete as per drawing and instruction of engineer-in-charge. Tea

Table : size - 600mm x 450mm x 450mm

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

12 Providing, fixing and arranging material welded construction excluding leveller 45.00 No. 16665.00

construction 0.7mm thick (+/- 0.07mm) CRCA sheet for shelf, 0.8mm thick (+/-

mm) High yield strength CRCA sheet for doors and back, 0.9mm thick (+/-0.08mm)

CRCA sheet for all other components, CRCA sheet 'D' grade high yield strength as

per IS : 513. Locking and Handle Mazak handle and three way locking mechanism

with shooting bolt. Shelving height wise adjustable shelf mounting, uniformly

distributed load capacity per each shelf is 40Kg maximum, 4Nos.of adjustable full

shelf and box file A4 size (85w x 345H x 285D) can be stored vertically on three

shelves and clear space above fourth shelf is 240mm. Finished with epoxy powder

coated to the thickness of 50 microns (+/-10) including all necessary fixtures,

fastners machinary etc. complete as per photographs / Drawing and directed by

Engineer-in-charge. Godrej Make : storewell plain size - 916mm x 486mm x

13 Providing and Arranging Cabinet made from 18mm thick MR grade Plywood box with 2.00 No. 6076.16

one drawer unit having size 260mm x 500mm x 150mm fixed on Ebco made

telescopic channel with godrej make lock with two keys set and one shutter having

SS hinges (Auto 16 deg.), handles and Indian teakwood border patty with melamine

polish. Cabinet finish with 4mm thick approved veneer and 0.8mm thick balancing

laminate to be provided. On top of the storage 18mm thick approved mirror polished

granite with rounding edge moulding shall be provided including necessary fixtures,

fastening including all materials and labours etc. complete as per drawing and

instruction of Engineer-in charge. Storage Unit : size - 325mm x 525mm x 750mm

14 Providing and Arranging FOOT REST made up of high impact polystyrene having 4.00 No. 1262.50

over all size 450mm x 350mm with tilts of 0° to 20° for angular movement and non

slippary platform surface including all materials and labour etc. complete as per

drawing / Photographs and instruction of engineer-in-charge. EBCO or equivalent

MAKE : size 450mm x 350mm

15 Providing and fixing Telescopic CPU stand made from M.S slim stores CPU under 20.00 No. 489.85

the table with soft anti vibration pads and adjustment width of 45mm to 100mm

having height adjustment from 310mm to 530mm and safe load carrying capacity of

20.00 kg finished with powder coating of 50 micron thickness including all necessary

fixtures, fasteneres, labour and material as diretced by Engineer-in-charge. EBCO or

Equivalent MAKE CPU Trolley

16 Providing and supplying of Podium in size of 53.3 x 165.1 x 307 Centimeters in Aloy 1.00 No. 13938.00

stell in item weigth of 20kg easy to Assemble: The CCNOS podium is lightweight

and portable and installation is quick and easy. For ease and safety in shipping, you

need to assemble them when you receive them within minutes. Application: Can be

used as church pulpit, cash register, standing reception desk, podium, classroom,

seminar, home, school, wedding, lecture hall, conference room, restaurant and other

places.Shape Design: The unique transparent design blends easily into any existing

decor, suggesting a modern and elegant design. Storage Design: the perfect height

for tall and low speakers. There is also a storage board in the middle, which can

store your wine glasses, books and other daily necessities, which is practical and

convenient. CCNOS Wooden Lectern Podium Stand,Design with Storage/Standing

EBCO or equivalent MAKE Key Board Tray (705 x 284 mm size)

17 Providing and Arranging dias table having Top 40mm thick overall made from 18mm 2.00 No. 20096.98

thick MR garde plywood with 4mm thick veneer on top and 0.8mm thick backing

laminate and teakwood border having size 25mm x 12mm with melamine polished

finish. Top border to be made from 75mm x 50mm indian teak wood.Top and both

side 40mm thick finish with 4mm thick veneer having melamine polish finish. Appron

to be made from 18mm thick MR grade plywood with 4mm thick veneer having

melamine polish finish with 0.8mm thick balancing laminate. 8mm thick back painted

glass on top to be provided. All veneer surface to be melamine polish. Bookslot on

the table shall be provided as per the detail drawing including all materials and

labour etc. complete as per drawing and instruction of engineer-in-charge. (with

teakwood border with melamine polish) Dias Table : size - 2100mm x 900mm x

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

18 Providing and Arranging table having 40mm thick top overall thickness made from 6.00 No. 12114.95

18mm thick MR grade plywood, top and side finish with 4mm thick veneer. both side

(inside and outside) to be veneered and top back side 0.8mm balancing laminate

including teak wood border patty of size 40mm x 12mm. Whole table having MS

CRCA Pipe framing of 50mm x 50mm x 1.6mm size and 50mm x 25mm x 1.8mm

size finished with epoxy powder coated of 50 micron thickness as per drawing /

photograph and details including all materials and labour etc. complete as per

drawing and instruction of engineer-in-charge. (with teakwood border with melamine

polish) Advocate Table : size - 2400mm x 900mm x 750mm

19 Providing, arranging and fixing Decorative Wooden chair for advocates having 10.00 No. 5398.45

Indian Teakwood in framing seat and back rest with smooth & curved edges in

armrest 450mm long and of size 75mm x 35mm with back rest having horizontal

member at top having size 75mm x 35mm and outer side verticle member having

75mm x 35mm & inner member 5 Nos. having size 25mm x 35mm, seating outer

frame having size 75mm x 35mm and inner member 5 Nos. having Size 25mm x

35mm with CRC tube setcion of size 60mm diameter 3.6mm thickness main base

frame and 20mm diameter 2.6mm thickness vertical & horizontal frame structure &

32mm dia. 3mm thick pipe for handle support with 50mm x 12mm thick main floor

base M.S. plate with welding & anchor fastener bolts fitted with seat, back and

support. All exposed wooden members shall be melamine polished including sand

papering and making edges smooth and metal members shall be finished with epoxy

polyester powder coated of 50 micron thickness with necessary other fixtures and

fastenings etc. complete as per drawings / photograph and instruction by Engineer-in-

Advocate Chair : Overall Size - 545mm x 540mm x 915mm

20 Providing and Arranging 50mm thick seat cushion for chair made from 40 density 110.00 No. 555.50

foam with 12mm supersoft HD for softness covered with high quality fabric (Basic

Rate Rs. 400 / Rmt) of approved shade including all materials and labour etc.

complete as per drawing and instruction of engineer-in-charge. Chair Cushion : size -

21 Providing, fixing & arranging Decorative Wooden Visiter 5 Seater Benches having 12.00 No. 17653.79

Indian Teakwood in framing seat and back rest with smooth & curved edges in

armrest 450mm long and of size 75mm x 35mm with back rest having horizontal

member at top having size 75mm x 35mm and outer side vertical member having

75mm x 35mm & inner member 5 Nos. having size 25mm x 35mm, seating outer

frame having size 75mm x 35mm and inner member 5 Nos. having size 25mm x

35mm with CRC tube setcion of size 60mm diameter 3.6mm thickness main base

frame and 20mm diameter 2.6mm thickness vartical & horizantal frame structure &

32mm dia. 3mm thickness pipe for handle support with 50mm x 12mm thick main

floor base M.S. plate with welding & anchor fastener bolts fitted with seat, back and

support. All exposed wooden members shall be melamine polished including sand

papering and making edges smooth and metal member shall be finished epoxy

polyster powder coated of 50 micron thickness with necessary other fixtures and

fastenings etc. complete as per drawings and instruction by Engineer-in-charge.

5 Seater WOODEN GANG SEAT : size- 2780mm x 510mm x 750mm

22 Providing and Arranging benches (bakada) made from 50mm x 25mm indian 6.00 No. 9182.92

Teakwood patti with smooth edge moulding 5 Nos. each on seat and back as per

design under structure made from CRC M.S. 50mm x 50mm x 1.6mm pipe 16 Guage

and 50mm x 12mm flat for base support with 50 micron powder coating frame. All

wooden member to be melamine polish including all materials and labour etc.

complete as per drawing and instruction of engineer-in-charge. Over all size :

2250mm L, Seat : 450mm W, back : 400mm. 5 Seater WOODEN Bench : size -

23 Providing and Arranging S.S. 3 seater airport chair having seat and back made from 16.00 No. 16362.00

CRCA capcular Tubular frame welded with perforated Die moulded CRCA sheet.

base frame made from round Tubular welded with horizontal beam Two side armrest

welded with frame including finishing metal parts with epoxy polyster powde coating

of 50 micron thickness Including all materials and labour etc. complete as per

drawing and instruction of engineer-in-charge. 3 Seater S.S. airport chair : Henking

make : (H303-3P) size- 1590mm x 480mm x 880mm (H)

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

24 Providing and Arranging Cushioned Seat & back, P.P. outer back cover, P.P. arms, 32.00 No. 5252.00

Single back lock, Push back mechanism, gas lift for seat height adjustment, five

prong Nylon base with twin wheel nylon castor including all materials and labour etc.

complete as per drawing and instruction of engineer-in-charge. Size : Max. Hight

1020mm Min. Height 930mm, Seat : 500mm x 460mm, Back : 500mm x 440mm.

Low Back Chair : HOF MAKE - Priviya-7003

25 Providing and Arranging table for Library having Top and side of overall thickness 5.00 No. 23832.97

40mm made from 18mm thick MR grade plywood finish with 4mm thick veneer

having melamine finish and 0.8mm thick balancing laminate. Appron to be made

from 18mm thick MR grade plywood and finish with 4mm thick veneer having

melamine polish. Table frame and legs to be made from 50mm x 50mmx 1.6 mm

Size & 50mm x 25mm x 1.8mm size as per detail CRC MS PIPE finished with

micron epoxy powder coating. All veneer surface to be melamine polish including all

materials and labours etc. complete as per drawing and instruction of engineer-in-

charge. (with teakwood border patti with melamine polish) Table - size : 2100mm x

600mmx 750mm(H)

26 Providing and fixing AJANTA make wall clock of the desired shape and design as 8.00 No. 879.71

seletced by Engineer-in-charge. AJANTA MAKE WALL CLOCK

27 Providing and Arranging stool made from 25mm dia 16 Gauge pipe structure 4 Nos. 8.00 No. 1731.14

vertical and 4 Nos. Horizontal at Top and at Bottom for bracing and 50 micron epoxy

powder coating and top to be made from 18mm thick MR grade plywood finish with

1mm thick laminate on top and 0.8mm thick balancing laminate on bottom side with

Teak wood edge beading with malamine polish finish including all materials and

labours etc. complete as per drawing and instruction of engineer-in-charge. Stool

size - 350mm x 350mm x 650mm (H)

28 Providing, fixing & Arranging compactor of base frame fabricated from cold formed 23.00 Cum 32825.00

channel & angle setcions of 10/14 Gauge thick HRC material and setcions Sizes of

(25 x 100 x 25)mm, (25/45 x 100 x 25/45)mm, (45 x 45)mm with guide rails

comprises of solid round shaft of 30mm (Bright bar) in ground finish, press fit in to

cold formed 'U' channel made from 14 G thick material completely grouted within the

floor with 0 – 0 levelling having 4 Nos. of Cast Iron Wheels of Size : 128mm x

28mm (moving on a pair of rails) for units of lengths less than 3540mm. All units

more than length 3540mm shall have 6 nos. of cast iron wheels of size 128mm x

28mm (moving on 3 Nos. of rails). The Driving wheel will comprise of a central hub

resting on a pair of roller bearings with 3 insertable arms engaging into the hub.

Boltless type shelves made of 22 SWG C.R.C.A, quality steel having 8 folds each

designed to carry a U.D.L. of 50 Kgs. Vertical and central panels made out of

SWG mm thick C.R.C.A.

The ‘UNI-LOCK’, or the individual unit lock is a specially designed mechanism

embedded in the hand wheel body itself with a central lock to enable locking of the

entire system with one key with stoppers on either ends of the rails to prevent the

Compactor unit from moving away from the rail including all necessary fixture,

fastners, fittings, labour, material, machinary etc. complete as seletced and diretced

by Engineer-in-charge. KOMPRESS INDIA MAKE - COMAPCTOR

29 Providing and Arranging S.S. Nickle chrome plated Dustbin having 254mm dia. & 24.00 No. 909.00

356mm height with perforated S.S. sheet having thickness 18G including all

necessary fixture, fastners, fittings, labours, materials, machinary etc. complete as

seletced and diretced by Engineer-in-charge. S.S.DUSTBIN- SINTEX

MAKE:SSHPB02-01

30 Providing and Arranging of 100 Litre capacity LLDPE solid waste bin having size at 3.00 No. 2464.40

top 500mm & bottom 350mm square, height 900mm having standard weight as per

the manufacturer's specification of 1 unit including all necessary fixture, fastners,

fittings, labour, material, machinary etc. complete as seletced and diretced by

Engineer-in-charge. Dustbin Big 100 lit : SINTEX MAKE - no: GBR 10-01

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

31 Providing and Arranging of DUSTBIN WITH CASTOR WHEEL having useful load 3.00 No. 3555.20

capacity of 100 Kg / 120 ltr made up of LLDPE solid waste bin having size at top

440mm & bottom 350mm x 285mm & height of 840mm & having standard weight of

1 unit as per manufacturer's specification including all necessary fixture, fastners,

fittings, labour, material, machinary etc. complete as seletced and diretced by

Engineer-in-charge. Approved Make: Sintex model no: GBRW 12-01. Dustbin with

castor : SINTEX MAKE - no: GBR 12-01

32 Providing and Arranging of pole mounted dustbin of 100 Litre capacity made up of 6.00 No. 8295.13

LLDPE solid waste bin having WIDTH 759mm and height should be 1924mm having

standard weight as per the manufacturer's specification of 1 unit including all

necessary fixture, fastners, fittings, labour, material, machinary etc. complete as

seletced and diretced by Engineer-in-charge. Dustbin Pole Mounted : SINTEX

MAKE: GBRSS10-01

33 Providing, fixing & Arranging boltless shelves (1 Main) having load bearing members 10.00 No. 5839.82

made of high strength CR/HR steel confirming to IS 5986 :2002 / IS 2062 : 2006 by

using steel confirming to is 5986- Fe 410 with minimum yield strength of 255 MPa

The fasterners of grade 8.8 with galvanized finish including powder coating with

thoroughly anti rust treatment the upright component of T- shaped oxford blue finish

of G 50 type having profile width of 50mm. single piece of having Min. yield

strength of 250Mpa shelves of 14 based zinc coated finish having size of 1300 mm x

450 mm x32mm mounted on shelf clips clips having profile setcion of (24 x 8 x

35)mm & 2 bends with galvanized surface finish stability beam of setcion 65mm x

30mm with galvanized surface finish back tie of 5mm dia. of tie rod, turn buckle of

90mm with galvanized surface finish all the components having powder coating with

thoroughly anti rust treatment including all necessary fixture, fastners, fittings, labour

material machinary etc. complete as seletced and diretced by Engineer-in-charge.

Boltless Rack :Godrej / HOF or Equivalent MAKE: REC-6C

34 Providing & fixing notice board having 9mm soft board as a core material 1mm 4.00 No. 4166.25

laminate sheet as back material & surface of 1.0 mm felt cloths, having profile of

heavy alluminium fluted anodized profile 10 to 12 micron of 18mm to 25mm thick

board ‘C’ channel & corner is made up of molded virgin ABS grey colour hanging

vertical & horizontal hanging facility as per sletced colour & size including all

necessary fixture, fastners, fittings , labour, material, machinary etc. complete as

seletced and diretced by Engineer-in-charge. Approved Make : alkosign / altop /

signmark DELUX SERIES. Notice Board : size - 900 mm x 1200 mm

35 Providing and Arranging acrylic work top with 10mm clear imported Acrylic sheet 4.00 No. 2525.00

with two brass rods with height adjustable of overall size 580mm x 400mm etc.

complete as diretced by engineer-in-charge. Approved Make: alkosign / OKay/

signmark. Acrylic Work Top

36 Providing and fixing Alkosign make powder coated M.S. complain box having overall 4.00 No. 3232.00

size of 302mm x 355mm x 102mm with lock and key. Complain Box : Alkosign Make

size- 302mm x 110mm x 355mm(H)

37 Providing & Arranging ladder made from 67mm x 31mm x 3.15mm HINDALCO HE- 2.00 No. 5656.00

30 high tensile alluminium 'C' setcion having top size 455mm x 250mm (18" x 10")

with steps in bottom square setcion & overall width of ladder is 400mm with rubber

shoes at the bottom of ladder. Height shall be 8 feet. Alluminium Ladder : HEERA

INDUSTRIES Make model no:HI

38 Providing & Arranging wheel chair for physically handicapped person having 2.00 No. 8617.32

dimension 790(L) x 600(W) x 70(H)mm. With foldable frame structure made of

bars made of A3 carbon steel material with setcion 25.4mm x 1.2mm., 24 inch solid

mag wheels with alloy in the rim, hand rim of setcion 16mm x 1.2mm. carbon steel

with chrome finish, front wheel of 8 inch HUB made of PA polymer & outer side of

solid rubber PU moulded arm rest & base made of ABS, leather finish calf rest &

seat with cushion alluminium foot rest with updown movement having extended base

foot press with moulded plastic including hand brakes & full structure is anti rust

chrome finish with users capacity of 100 kg including all necessary fixture, fastners,

fittings, labour, material, machinary etc. complete as seletced and diretced by

Engineer-in-charge. Wheel Chair : GODREJ / HOF / SAGE INDIA

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

39 Providing and fixing 305mm x 305mm (12 " x 12") bronze metal glossy finish indian 4.00 No. 1579.64

national emblem including all materials and labours etc. complete as per detail

drwaing and diretced by engineer-in-charge. National Emblem Bronze metal : Size

40 Providing and Arranging Conference table Top and Leg 40mm thick made from 15.00 No. 8419.36

18mm thick MR grade plywood and 4mm thick veneer with melamine polish finish.

Appron to be made from 18mm thick MR grade finish with 4mm thick veneer with

melamine polish finish. Provision for the sound system and cable manager shall be

made as per the requirement Including all materials and labour etc.complete as per

detail drawing and instruction of engineer-in-charge. Conference Table : HOF or

equivalent MAKE - CFT 6000 SIZE : 2100mm x 600mm x 750mm (H)

41 Providing and fixing full height partition with installation upto ceiling or beam bottom 65.00 Sq.m. 1885.67

as per drawing and framing the skeleton (plywood frame structure) with 18mm +

18mm thick MR grade plywood for vertical and horizontal plywood (patti) both side

cover with 6mm + 6mm MR grade plywood for grooving as per design. Fixing

properly without any air gap and finishing with seletced 1mm laminate. Before

installation, make hole/face plate for conduit pipes of eletcrical/networking cables

with openable stud from partition including all materials and labour etc. complete as

per detail drawing and instruction of engineer-in-charge. (All edges to be finish with

teakwood border & melamine polish) CABIN PARTITION

42 Providing and fixing 25mm thick PLMDF full round curvica with 1.00mm thick 18.00 Rmt. 7449.76

laminate and 2mm thick PVC edge bidding finish.Drawer Unit - (450 x 550 x 600)mm

made of all Structure 18mm thick MR grade plywood with veneer melamine polish

finish. Drawer run on Ebco make telescopic channel with Godrej/Ebco make lock

inside 0.8mm thick laminate of aproved shade including CPU trolly a key board tray,

all materials and labour etc. complete as per detail drawing and instruction of

engineer-in-charge. Running Table for Comp. Room

43 Providing and Arranging table top 37mm thick made from 18mm thick MR grade 14.00 No. 8635.50

plywood with 1mm thick laminate finish. Leg & frame to made from 50mm x 50mm x

1.6mm & 50mm x 25mm x 1.8mm size CRC pipe powder coated 50 micron finish

with levelar Appron 18mm thick MR grade plywood with 1mm thick laminate finish

with teakwood border of specified size with melamine polish. The balance laminate

0.8mm thick to be provided on inner faces including all materials and labour etc.

complete as per drawing and instruction of engineer-in-charge. Working Table: size

44 Providing and fixing Impulse Blackout Roller Blinds with fabric of 0.53mm thickness 181.00 Sq.m. 1363.50

and Top channel of non-rusting aluminium alloy with 1.25mm thickness and bottom

channel of 1.50mm thickness & 21mm diameter. Tilt channel of ABS plastic with

1.50mm polyster cord with 4.50mm balls with stop lock arrangement including all

necessary fixture, fastners, fittings, labour, material, machinary etc. complete as

seletced and diretced by Engineer-in-charge. Roller Blinds : MARVEL or Equivalent

45 Providing and fixing sign board made of acrylic sheet and fixing on door wall in first 50.00 No. 133.32

or second alphabet as instructed in radium material including all materials and labour

etc. complete as per detail drawing and instruction of engineer-in-charge. Acrylic

Name Board : 12" x 5 "

46 Providing and fixing DORMA MAKE DOOR CLOSURE MODEL NO TS 77 std. at 25.00 No. 1872.54

desired location as instructed Including all materials and labour etc. complete as per

detail drawing and instruction of engineer-in-charge. DOOR CLOSURE : DORMA

MAKE : TS

47 Providing & fixing steel back key cabinet for 40 keys having overall size of 520mm 4.00 No. 3035.05

(W) x 500mm(H) x 50mm(D) of 13mm Anodised alluminium single & double frames.

Back steel sheet is gray colour powder coated with 40 nos. punched holes for key

chain holding including plastic key chain with steel wire rings numbered 1 to

having corners of ABS in grey colour. Cabinet should be with 1 No. of lock with

Nos. of keys & top cover in 3mm thick acrylic sheet including all necessary fixture,

fastners, fittings, labour, material, machinary etc. complete as seletced and diretced

by Engineer-in-charge. Key Cabinet 40 keys : ALKOSIGN MAKE

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

48 Providing and Arranging table top made of 36mm thick BWR grade plywood with nail 27.00 No. 24965.18

curvica Laminate finish.Leg & frame to be made from 50 x 50 x 1.6mm size & 50mm

x 25mm x 1.8mm size CRC Square pipe powder coated 50 micron finish with levlar

apron 18 mm thick MR grade plywood with Laminate finish. Drawer Unit-450 x 550 x

600 mm made of all structure 18 mm thick MR grade plywood with Laminate finish.

Drawer run on Ebco make telescopic channel with Godrej / Ebco make lock inside

0.8mm thick laminate of approved shade. Side Table : side table top made of 36mm

thick MR grade plywood with nail curvica Laminate finish. side & shutter made of

mm thick MR grade plywood with Laminate finish Including all materials and labour

etc. complete as per drawing and instruction of engineer-in charge.

Table Unit Size :- 1500 mm x 600 mm x 750 mm(H)

Drawer Unit Size :- 450mm x 550mm x 600mm(H)

Storage Unit :- 900mm x 450mm x 750mm(H)

49 Providing and Arranging Mobile Drawer Unit made of all structure 18mm thick MR 4.00 No. 5911.53

grade plywood with 4mm thick veneer melamine polish finish. Drawer run on Ebco

make telescopic channel with Godrej/Ebco make lock & inside 0.8mm thick laminate

as balancing laminate as per approved shade with one Drawer and One Shutter with

teakwood border patti melamine polish including all materials and labour etc.

complete as per drawing and instruction of engineer-in-charge. Mobile Drawer Unit-

Size:1500mm x 600mm 750 mm

50 Providing and Arranging Two side argument small desk made of 18mm thick MR 8.00 No. 2733.06

grade plywood having Desk Size : 600mm x 450mm & front height 450mm back

height 400mm (i.e. slanting position) with wooden teakwood patti for frame & to hold

paper and pen. Top and side 18mm thick finish with 4mm thick veneer both side. All

veneer & teakwood surface to be melamine polish.

51 Providing and fixing Judges Court Room Dias Railing to be made from best quality 20.00 Sq.m. 4184.43

special Indian Teak wood top horizontal rails of size 4" x 3" and bottom horizontal

rails of size 4" x 1.5", vertical posts of size 3" x 3" and end posts of size 4" x 4" &

vertical posts placed @ 9" c/c and end posts placed at four places as shown in

drawing with all necessary materials all exposed wooden/plywood member including

sand papering, making, edges round with necessary hardware such as ailen bolt,

sheet, metal screw, nail, gluing material, sliding chanels, fixtures, all exposed

wooden members shall be semi glossy PU polished including sand papering and

making edges smooth with necessary other fixtures and fastenings, including with

bhutan bord of red colour shade or approved shade 8mm to 10mm thick sheet fixed

inside the railing so that the vertcal post can be seen from front side with making

openable entry gate in railing to reach staff towards dias as per drawings approved

by judiciary department and instruction by Engineer-in-charge.

52 Providing and fixing Judges Court Room Witness Box with Railing to be made from 2.00 No. 19230.40

best quality Special Indian Teak wood top horizontal rails of size 4"X3" and bottom

horizontal rails of size 4"X1.5", vertical posts of size 3"X3" and end posts of size

4"X4" & vertical posts placed @ 9" c/c and end posts placed at four places as shown

in drawing with 6" high platform made from 20mm thick plywood sheet and

necessary vertical and horizontal wooden posts with all necessary materials all

exposed wooden/plywood member including sand papering, making, edges round

with necessary hardware such as ailen bolt, sheet, metal screw, nail, gluing material,

sliding chanels, fixtures, all exposed wooden members shall be semi glossy PU

polished including sand papering and making edges smooth with necessary other

fixtures and fastenings as per drawings approved by judiciary department and

instruction by Engineer-in-charge.

53 Providing and fixing Judges Court Room Victim Box with Railing to be made from 2.00 No. 16874.07

best quality Special Indian Teak wood top horizontal rails of size 4"X3" and bottom

horizontal rails of size 4"X1.5", vertical posts of size 3"X3" and end posts of size

4"X4" & vertical posts placed @ 9" c/c and end posts placed at four places and one

side openable gate of same railing as shown in drawing all necessary materials all

exposed wooden/plywood member including sand papering, making, edges round

with necessary hardware such as ailen bolt, sheet, metal screw, nail, gluing material,

sliding chanels, fixtures, all exposed wooden members shall be semi glossy PU

polished including sand papering and making edges smooth with necessary other

fixtures and fastenings as per drawings approved by judiciary department and

instruction by Engineer-in-charge.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

54 Providing and fixing wooden panneling made of framing the skeleton(plywood frame 74.00 Sq.m. 2127.06

structure)with 18mm mm thick BWR grade plywood for vertical and horizontal

plywood (patti) back side cover with 6mm thick BWR grade plywood for grooving as

per design.Fixing properly without any air gap and finishing with seletced 4 mm thick

veneer including pilishing with melamine. Before installation, make hole/face plate

for conduit pipes of eletcrical/networking cables/Pipe Line with openable stud from

partition Including all materials and labour etc.complete as per detail drawing and

instruction of engineer-in charge.

55 Providing and Fixing 6mm Unitex make Loop Pile Carpet Roll base dorm made out 44.00 Sq.m. 1868.50

of 100% BCF Polypropylene pile fibre with solution Dyed Yarn width(mts) 3.66 & Roll

Length approx 30(mts) with 6mm thick. The Carpet should have 650 to 850 gms/m2

Tufted Pile weight with 165,900 tufts/m2 Density. Bonding Strength should be

Newton and Tuft withdrawal strength 20 Newton of approved Colour, product model

and shade by Engineer in charge including all necessary fitiings, labour material and

man power for the desired workmanship etc. comp. Floor Carpet : UNITEX MAKE

56 Providing & fixing Wooden Wall Panelling and Cupboards having height of 2.90 Mt 76.00 Sq.m. 3917.79

covering both sides walls made out of Special Indian teakwood in framing, top /

bottom border/edges, cupboard shutters frame etc. with BWP 18 mm thick Century

make plywood laminated with 4.0 mm thick Century make veneer in panelling,

cupboards, shelves with Decorative Glass in shutters, decorative S.S. Handles and

necessary superior quality hardware's viz sliding channels, hinges etc. inculsive of

necessary fixtures & fasteneres etc. complete as per drawings and designs supplied

by the Cheif Architect and existing sample in the Dist. court and instruction by Dist.

Court Authority and Engineer-in-charge.

57 Providing and fixing Godrej Type steel cupboard in wall with steel frames and 63.00 Sq.m. 3355.22

shutters using 18 gauge M.S. sheet including necessary fixtures, fastening like locks

handles, hinges with approved shade of sparay painting etc. complete as directed.

58 Providing and Arranging Library table Top and Leg 40mm thick made from 18mm 12.00 Rmt. 9146.56

thick MR grade plywood and 4mm thick veneer with melamine polish finish. Appron

to be made from 18mm thick MR grade finish with 4mm thick veneer with melamine

polish finish. Provision for the sound system and cable manager shall be made as

per the requirement Including all materials and labour etc.complete as per detail

drawing and instruction of engineer-in-charge.

59 Supplying & Arranging Dining table of overall size 2300mm x 900mm x 730mm as 3.00 No. 12688.63

per drawing and to make from following materials at site of work as required &

directed etc. complete.

60 Providing and fixing composite panel cladding work at front with using 4mm thick 61.00 Sq.m. 6504.40

exterior grade 30 micron PVDF coating with foil thickness of 0.25 mm composite

panel and aluminum flat of 38 x 25 x 1.4mm with 15 micron colour anodized with

silicon grade 995 and 789 and G.P where it is necessary at pressure tape Baker Rod

size depend upon gap between two panel with all internal hardware accessories and

fitting including scaffolding & labour charges etc. complete with all floors.

61 Providing & fixing FRP mural of 'Statue of Justice' having height of 2.50 mt. base 1.00 No. 214877.50

foundation of 1.20 x 1.20 mt. with Copper finish as approved and fixing it with

appropriate S.S./brass screw and joining with adequate sealant etc. complete as per

direction of the Engineer in charge.

62 Providing & fixing FRP mural of 'Statue of national emblem having height of 1 mt. 1.00 No. 168417.50

base foundation of 1.20 x 1.20 mt. with Copper finish as approved and fixing it with

appropriate S.S/brass screw and joining with adequate sealant etc. complete as per

direction of the Engineer in charge.

63 Providing and fixing 12 mm thick toughened glass partition wall with ss fitting with 22.00 Sq.m. 4936.38

ss 304 fitting 1.5 m high frosted film of all heights and 6" SS Legs as per design

provided by the architect including all required accessories and fixtures such as

fasteners, screws etc. fix as per required IS code and as per the direction.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

64 Providing and placing MS cupboard type Locker having 12 locker per cabinet 1.00 No. 20326.25

having all over dimension 2000 x 915 x 480mm, body made from 24 gauge steel and

door made from 22 gauge steel, individual locker dimension is 300 x 300 x 450mm

with pad lock and two set of keys, all surface having power coating finish.

65 Providing and placing MS Cash Box with locking having all over dimension 600 x 1.00 No. 21487.75

450 x 400mm, body made from 18 gauge steel and shutter made from 18 gauge

steel, individual locker dimension is 550 x 400mm with pad lock and two set of keys,

all surface having power coating finish.

66 Supplying Computer Table (1200mm x 750mm x 750mm) to be made from 20.00 No. 13357.25

glass on top, 18mm plywood ISI brand with decorative Teakwood finish Veneer Top,

side and front using, all necessary materials all exposed wooden / plywood member

including sand papering, making, edges round with necessary hardware such as

alien bolt, sheet, metal screw, nail, gluing material, sliding channels, fixtures, all

exposed wooden members shall be semi glossy PU polished including sand

papering and making edges smooth with necessary other fixtures and fastenings etc.

complete as per drawings approved by Judiciary department and instruction by

Engineer in charge.

Total Rs.

i.e. Rs. Seventy Five Lakhs, Eight Thousand, One Hundred Seventy Four and Fourty Seven Paisa Only

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed and to

be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Chhotaudepur (R & B) Sub Division, Chhotaudepur (R & B) Division, Chhotaudepur (R & B) Division,

Chhotaudepur Chhotaudepur Chhotaudepur