REPAIR TO SIGN BOARD ROAD FURNITURE AND PARAPET WALL UNDER AGE(I) LANSDOWNE

S&F in repair direction sign board of any size with 4 mm thick aluminum composite panel comprising both side high intensity prismatic grade retro reflective sheeting of 3M as base and with cut out message (legends borders letters / numerals/logo etc) height of letters up to 150 mm & letters up to 40 nos/sqm as directed with high intensity prismatic grade retro reflective sheeting both side of boards with epoxy powder coating, including fixed over framed work of stainless steel square hollow section including excavation and PCC (1:3:6) type C2 of size 450x450x450 mm completed all as specified and directed. Note:-Rate of pedestal (vertical stand is not included in this item and same will be paid saperately under Item No 8)

Supply and fix in repair Solar delineator LED with cage and pole height 1000 mm, size of pole delineator 50 mm outer dia height of body (top) size 70 mm x70 mm x100 mm and to be imbeded in PCC (1:2:4) type B1 of size (200x200x200)mm Power Source High-efficiency solar panel (mono or polycrystalline), battery rechargeable NiMH battery (typically 1.2V or 2.4V) LEDs Super bright LEDs (Red) Visibility Up to 1 kilometer, Operating mode automatic dusk-to-dawn operation (flashing or steady light, often customizable) Body Material, Durable, UV-resistant Polycarbonate (PC) and ABS plastic, Weather Resistance, Waterproof and weatherproof design, typically IP65 or IP67 rated, Backup Time, 36-60 hours of operation after a full charge complete all as specified.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed

M&L preparation of PCC road surfaces and applying thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat over one coat of primer to adjoin the old PCC road as in centre line, edge line, zebra crossing and stop lines etc. Width of road marking 150/100mm using 'HOT MARK' thermoplastic paint (Hot application) white or yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blender, glass beads, titanium dioxide, calcium carbonate, inter fillers etc, thermoplastic requirement for glass beads shall be conforming to BS- 6086 of MORTH specification including spraying of glass beads @ 300 Gms/Sqm etc all as per manufacturer's instructions complete all as specified and as directed.

S&F in repair Plastic Speed Bump which are highly resistant to severe impacts and harsh weather condition. Its interlocking sub units make it bind perfectly into a one firm bump.the per-colored material (Black/Yellow) and UV stabilizers keep themperpetually colorful, Studded with reflectors on either side, they are clearly visible to the motorists during night. It is made of PE plastic material. Its fixing with metallic bolts/MS stud/Anchor fashner and suitable adheshive are used for installation on road . Available in Yellow and Black colours. Dimensions: L=730mm, width 245 mm & Height= 70 mm ; to be installed as per the directions of Engineer -in-charge. Model- Dark Eye-DA 1006 / or equivalent.

S&F convex mirror 1200 mm size made of PC material & FRP material is used in making brim & back holding plates with suitable corrosion free with necessary fixing arrangement including fix the mirror at necessary height as per site requirement, meant for road turning, intersections, curves, "T" junctions, parking lots etc. ideal for surveillance, have clear and definite mirror image, complete all as specified & directed. Note:-Rate of pedestal (vertical stand is not included in this item and same will be paid saperately under Item No 8)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for preparation of old painted surface of concrete road side kerbs stone of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.