Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40,448.80Accepted-AOC | L1 | Accepted-AOC L1 |
Tender Value
₹42,134
EMD Value
₹1,053
Closing Date
26 Sept 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Engineer
O/o the Assistant Engineer, Karimannoor G P
Rennovation of Marambara Public well
2023_LSGD_613519_28
2023_LIDEW_AE_KMNR3
Open Tender
Civil Works - Water Works
Item Rate
180 days
Karimannoor G P
Please refer Tender documents.
8 documents required · 8 mandatory
₹335
Yes
₹1,053
Yes
2 May 2025
19 Sept 2024
27 Sept 2024
19 Sept 2024
26 Sept 2024
19 Sept 2024
Amount
Well maintenance
OD380809/2022-2023:Labour engaged for cleaning the premices
50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
50.18.9.16.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
OD409070/2022-2023:Providing and fixing precoated galvanised iron profile sheets(size,shape and pitch of corrugation as approved by Engineer -in-charge)0.35 mm(+0.05%),total coatedthickness with zinc coating 120grams per sqm as per sqm as per is:277,in 240 mpa steel grade ,5-7 microns epoxy primer on both side .of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length up to 12 metre or as desiredby Engineer -in-Charge.The sheet shall be fixed using self drilling /self tapping screws of size (5.5*55 mm) with EPDM seal,completc up to any pitch in horizontal/ verical orcurved surfaces,excluding the costof purlins,rafters and trusses and including cutting tosize and shape wherever required
13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
OD411015/2022-2023:Supplying, fabricating 25mm thick factory made solid panel PVC door with frame, locally available best quality including cost of all fittings,labour charges etc. complete.
51.18.12.6:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) <br> External work - 50 mm nominal dia
Bidder Name
TINTUMON T
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1076271.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .