Construction works for Establishment of Permanent Tasar Nursery at Bhagamunda, Keonjhar.

Amount

LAND DEVELOPMENT AND ORCHARD

Land developement with proper levelling,contouring & orchard planning.

APROACH ROAD (C.C)

Earthwork in embackment in all kind soil etc complete as per E.I.C.

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete

Granular Sub-Base (GSB) with 40 mm size metal including cost, conveyance, royality etc complete

Cement concrete (1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete

C.C work ( 1:1.5:3) with 12 mm size chips including cost, conveyance etc complete

Cutting bending and binding of M.S or Tor rod and tying the Grills etc complete

Providing Hume pipe (NP4) including erection on concrete bed.

COMPOUND WALL

Earth work excavation of foundation in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and levelling the bed and depositing the excaveted earth away from site and as per the direction of the Engineer-in-c

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in Plinth with cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in S/S with providing and finishing expansion joint 1" @ 40'0" c/c with cost, conveyance, royality etc complete

R.C.C work ( 1:1.5:3) with 12 mm size chips including cost, conveyance etc complete

Plinth Band

Cutting bending and binding of M.S or Tor rod and tying the Grills etc complete

16mm cement plaster in CM (1:6) over bricl work.

Making of front wall decorative for asthitic view as per approved design.

Weather paint 2 coats over a coat of prime coat of approved shade.

SECURITY KIOSK

Earth work excavation of foundation in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and levelling the bed and depositing the excaveted earth away from site and as per the direction of the Engineer-in-c

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in F&Pwith cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in S/Swith cost, conveyance, royality etc complete

R.C.C work ( 1:1.5:3) with 12 mm size chips including cost, conveyance etc complete

Column Footing

Column

Plinth Band

Roof Beam

Chhaja

Roof Slab

Cutting bending and binding of M.S or Tor rod and tying the Grills etc complete

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete

16mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete.

Supplying Fitting and fixingwindow grills , shutters etc complete

Door (Aluminium fitting)

Windows Aluminium sliding

Fixing Vitrified tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Painting two coats of enamel paint over a coat of priming including all costs of labour ,Paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge.

Distempering two coats with any approved shade including cost conveyance royality etc complete as per direction of EIC

Two coat Weather painting over one coat primmer with approved shade etc complete

25mm grading in C.C (1:2:2) using 4.7 mm size hbg cleaned bajri (Down graded chips) mixed with water proof compound-per 1Sqmt

MS GATE

Earth work excavation of foundation in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and levelling the bed and depositing the excaveted earth away from site and as per the direction of the Engineer-in-c

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in S/Swith cost, conveyance, royality etc complete

R.C.C work ( 1:1.5:3) with 12 mm size chips including cost, conveyance etc complete

Column Footing

Column

Plinth Band

Cutting bending and binding of M.S or Tor rod and tying the Grills etc complete

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete

Two coat Weather coating over two coats primmer with any approved shade etc complete

Making gate for decorative of asthitic view

Supply & fixing MS gate with all materials complete.

INPUT GODOWN

Earth work excavation of foundation in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and levelling the bed and depositing the excaveted earth away from site and as per the direction of the Engineer-in-c

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in F&Pwith cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in S/Swith cost, conveyance, royality etc complete

R.C.C work ( 1:1.5:3) with 12 mm size chips including cost, conveyance etc complete

Column Footing

Column

Plinth Band

Lintel

Roof Beam

Chhaja

Staircase

Roof Slab

Rat Proof (M20)

Cutting bending and binding of M.S or Tor rod and tying the Grills etc complete

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete

16mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete.

Supplying Fitting and fixingwindow grills , shutters etc complete

S/F/F of window (sliding type) made up Alluminium section 9778 as window frame,section No.4095,4096 & 9777,3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement all fitting cost of glass complete smoth.

S/F/F of GI wiremesh to the windows with MS flats & nut & boils finished smooth.

Fixing Vitrified tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Distempering two coats with any approved shade including cost conveyance royality etc complete as per direction of EIC

Two coat Weather painting over one coat primmer with approved shade etc complete

Painting two coats of enamel paint over a coat of priming including all costs of labour ,Paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge.

S/F/F of S.Steel railing in 3 rows (top 2" dia one row niddle 3/4" dia in row) with required balustrade & newel post)

25mm grading in C.C (1:2:2) using 4.7 mm size hbg cleaned bajri (Down graded chips) mixed with water proof compound-per 1Sqmt

INTERNAL ELECTRIFICATION

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard )

Group A

Group B

Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire: finolex/ Anchor/Havels/L&T/KDK) Average Length: 3 mtr

Recessed wiring to Twin control light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard )Group C

Recessed wiring to ceiling fan point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire: finolex/ Anchor/ Havels/L&T/KDK) Group B

Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer in Charge.

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard )Group C

Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge.

Recessed wiring for 3 x 6 amp socket outlet controlled by 1nos 16Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge.

SUBMAIN.

Recessed wiring to submain in 4 x 16 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 50 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. ( For PDB )

Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. ( For LDB & 32A IND SOCKET )

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From DB to Switch Board .COMPUTER & PROJECTOR POINTS and 15A SOCKETs )

Supply and fixing of following way three/single pole and neutral, sheet steel, MCB distribution, 415/240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS and blank module plates as required.

6way TPN Horizontal Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with Incommer 1 No-40A 4P RCCB (100mA) Outgoings-6-32 A SP MCB-18Nos,(L&T/ Schneider) .LDB

4wayTPN Horizontal Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with Incommer 1 No-63A 4P RCCB (100mA) Outgoings-6-32 A SP MCB-12Nos,(L&T/ Schneider) .PDB

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4way SPN Distribution Boards suitable for 240 V, Single phase, 2 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-25A DP MCB (10KA) Outgoings-6-32 A SP MCB- 2 Nos,(L&T/ Schneider) . LMR DB

CABLE .

Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4 core 16 sq.mm directon surface as required.

EARTHING

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.

FIXTURE

12 W LED Tube. to PHILIPS or any approved make as directed by EIC.

12 W LED lifgt post inside of compound wall with all fitting & fixture. to PHILIPS or any approved make as directed by EIC.

Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required of any approved make as directed by EIC.

BORWELL

Labour charges for drilling a vertical bore hold of a specified dia for specified depth below GL.through consolidated on unconsolidated rock with down the hold hammer drilling rigs or combination drilling rigs as required to suit the site condition as per the direction of EIC.including supply of rigs with it's accessories T&P for lowering of 200mm to 150mm pipe for housing fitted with socket with or without well screens as per the necessity.

Drilling of 200 mm dia bore

Drilling of 150 mm dia bore

Supply of 200 mm dia ASTM 80 Sch. PVC pipe

L/C for lowering of 200 mm dia casing pipe

Cleaning & developing the bore well using own compressor continuously till clar & adequate discharge of water-Each

S/F/F of 1.5 HP Kilosker make cubmesible pump with its accessories & control pannel board,2.5m flat cable,steel wire etc.

Supply of ASTM 80 sch.HDPE pipe of 40 mm dia.

TOILET BLOCK

Earth work excavation of foundation in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and levelling the bed and depositing the excaveted earth away from site and as per the direction of the Engineer-in-c

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in F&Pwith cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in S/Swith cost, conveyance, royality etc complete

R.C.C work ( 1:1.5:3) with 12 mm size chips including cost, conveyance etc complete

Column Footing

Column

Plinth Band

Lintel

Roof Beam

Chhaja

Roof Slab

Cutting bending and binding of M.S or Tor rod and tying the Grills etc complete

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete

16mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete.

Supplying Fitting and fixingwindow grills , shutters etc complete

Door and window

PVC Door

S/F/F of window (sliding type) made up Alluminium section 9778 as window frame,section No.4095,4096 & 9777,3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement all fitting cost of glass complete smoth.

Fixing Vitrified tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Distempering two coats with any approved shade including cost conveyance royality etc complete as per direction of EIC

Two coat Weather painting over one coat primmer with approved shade etc complete

Painting two coats of enamel paint over a coat of priming including all costs of labour ,Paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge.

25mm grading in C.C (1:2:2) using 4.7 mm size hbg cleaned bajri (Down graded chips) mixed with water proof compound-per 1Sqmt

INTERNAL ELECTRIFICATION

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard )

Group A

Recessed wiring to submain in 4 x 16 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 50 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. ( For PDB )

4wayTPN Horizontal Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with Incommer 1 No-63A 4P RCCB (100mA) Outgoings-6-32 A SP MCB-12Nos,(L&T/ Schneider) .PDB

12W LED to PHILIPS or any approved make as directed by EIC.

INTERNAL PH AND SANITARY WORKS

Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china floor mounted water closet (European pattern) 'P' or 'S' type of approved make, As per IS-2556 with ISI mark, including supply of sutaible PVC wall plug and Brass screws etc. all complete including cost of PVC seat cover (solid) with hinges & rubber buffers etc with low level pvc cistern. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA/PARRYWARE

Ladies urinal

Gents urinal

Providing all materials, labour, and T&P for fitting and fixing of 10 liter capacity PVC low level cistern complete with all internal fittings of approved make as per IS-7231 with ISI mark and Providing of necessary PVC wall plug, screws and 15mm dia PVC connection pipe with union at both end ,including testing etc. all complete as per specification & direction of Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA/PARRYWARE

PVC low level cistem

Supply all materials and labour for fitting and fixing of 560x410mm white glazed vitreous china oval wash hand basin of approved make with supply & fixing of 32mm CP waste,15mm dia PVC water connection pipe, basin bolts & Nuts of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4) etc. with all taxes, duties, transportation etc. all complete as per direction of EIC. (Make:JAQUAR/HINDWARE/CERA/PARRYWARE)

Providing and fixing 15mm dia CP angular stop cock

Providing and fixing 15mm dia CP two way bib cock

Providing and fixing Hand Faucet

Providing and fixing15mm dia pillar cock

Providing and fixing32mm CP Bottle Trap

Providing and fixingStainless steel jali grating with hole of floor / trap

Providing and fixing on wall face unplasticised Rigid PVC soil, waste water pipes conforming to IS:13592 Type-B, including jointing with seal-ring conforming to IS:5382, Make : SUPREME/ASTRAL/ASHIRVAD

110mm dia

160 mm dia PVC waste pipe

Supplying all materials, labour, T&P, fitting and fixing of following dia UPVC SWR fittings of approved make confirming to IS-14735 with all taxes, duties, transportation & requisite testing as per specification & direction of Engineer-in-charge. Make : SUPREME/ASTRAL/ASHIRVAD

110mm x110mm P trap/S trap

110mm WC Connector/ Bend with lip ring

110mm dia Plain Bend 87.5 deg

110 mm dia PVC floor trap

110mm dia single y with out door

110mm dia sweept tee with door

110mm dia Bend 87.5 deg with door

Providing and fixing Clorinated Polyvinyl Chloride (CPVC) pipes SDR-13.5 conforming to IS: 15778, having thermal stbility for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. The includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Make : SUPREME/ASTRAL/ASHIRVAD

20mm Dia

Cutting holes in 250mm thick brick masonry wall for taking PVC pipes through and mending good the damages

Providing anf fixing on wall face unplastic sizes rigid PVC Soil, waste water pipes confiorng to IS-13592 type "B" or as approved make including jointing with seal ring confirming to IS-5382 mak Supreme / Astral / Ashirbad etc.completed

110mm dia

Supplying all materials, labour, / T&P . Firring & fixinmg of follwing dua UPVC SWR fittings of approved make confirming to IS-14735 with all taxes, duties, transportation and requisite testing as per specifications and direction of EIC etc. complete.Make--Supreme / Astral / Asirbad.

110 mm dia plain bend 87.5 deg

110 mm dia bend 45 deg

Supplying, fixing, testing uPVC (lead free), UV protected pipes conforming to ASTM-D-1785 (sch-40) of approved make for water supply (Roof Ring line & Vertical Shaft ) jointing with solvent cement solution as per ASTM-D-2564

32mm Dia

25mm Dia

Supplying all materials, labour,T&P fitting and fixing of different size upvc sch-80 ball valve

50mm Dia

32mm Dia

25mm Dia

Supplying all materials ,joining materials,labour and T &P and laying UPVC Foam core pipe as per IS:16098 sn-4 for sewrage

160 mm dia pipe

Providing and fixing square mouth S.W gully trap, brick masonry chamber of size 250mmx250mm with sfrc cover complete as per approved specification and direction of the Engineer in charge

Providing and fixing square Mirrior complete as per approved specification and direction of the Engineer in charge

Providing, Fixing, testing & commissioning of ABS Rinsing spray (Health Faucet) with regulator of approved quality with flexible pipe 1.5 m long, wall hooked complete as required.Model Jaquar ALD-CHR-579 OR As Approved by EIC

INTERNAL PATHWAYS

Earthwork in embackment in all kind soil etc complete as per E.I.C.

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete

Granular Sub-Base (GSB) with 40 mm size metal including cost, conveyance, royality etc complete

Cement concrete (1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete

FIRE SAFETY

Provision for 5 kg Powder (Co2)Cease Fire fighting system with necessary fixtures required all complete smooth.

GAJENDRA KUMAR SAHOO