Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAdmitted-Fee/PreQual/Technical/Finance | ₹1.9 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹1.9 L+₹519.88 (0.28%)Admitted-Fee/PreQual/Technical/Finance | ₹1.9 L+₹519.88 (0.28%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | palasseril L2 | Jithin V L1 |
|---|---|---|---|---|---|
| 1.00Detailed Estimate | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.02 | cum | 360 ₹368.64 | 359.72 ₹368.35 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.02 | cum | 9,235 ₹9,456.64 Lowest | 9,235.97 ₹9,457.63 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 570.86 | kg | 188 ₹1,07,321.68 | 187.05 ₹1,06,779.36 Lowest |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 68.54 | sqm | 165 ₹11,309.76 | 164.86 ₹11,300.16 Lowest |
| 1.00 | 50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop | 4 | no | 172 ₹688 | 171.97 ₹687.88 Lowest |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 160 | per Letter per cm height | 6.3 ₹1,008 Lowest | 6.34 ₹1,014.4 |
| 1.01 | OD23870/2026-2027:DIAMOND MESH OF 5mmx5mm SQUARE WITH SIZE 5mm | 46 | sqm | 872 ₹40,112 Lowest | 872.46 ₹40,133.16 |
| 1.01 | OD24246/2026-2027:Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18
microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and purloins, rafters and trusses and including cutting
to size and shape wherever required.should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge.
The sheet
shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM
seal,
complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost
of | 26 | sqm | 635 ₹16,510 Lowest | 635.15 ₹16,513.9 |
Tender Value
₹1.9 L
EMD Value
₹4,656
Closing Date
18 Aug 2026, 6:00 pmClosed
Sreejith G. Nair
Office of the Assistant Engineer, LID EW Section, Ranni-Perunad Grama Panchayat, Ranni- Perunad PO, Pathanamthitta PIN - 689711
(RE TENDER )Annual Plan-310/2025-26 RPGP-Construction of Mini MCF for all Transferred Institutions
2026_LSGD_864076_8
02/ET/2026-27/AE/LIDEW/RPGP
Open Tender
Civil Works - Others
Item Rate
120 days
Ranni-Perunad Grama Panchayat
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,656
Yes
14 Sept 2026
6 Aug 2026
20 Aug 2026
6 Aug 2026
18 Aug 2026
6 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Detailed Estimate | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.004 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 0.6 | sqm | - | - |
| 1.005 | 50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop | - | no | - | - |
| 1.006 | 13.71:Lettering with black Japan pint of approved brand and manufacture | - | per Letter per cm height | - | - |
| 1.007 | OD23870/2026-2027:DIAMOND MESH OF 5mmx5mm SQUARE WITH SIZE 5mm | - | sqm | - | - |
| 1.008 | OD24246/2026-2027:Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18
microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and purloins, rafters and trusses and including cutting
to size and shape wherever required.should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge.
The sheet
shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM
seal,
complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost
of | - | sqm | - | - |
stage.html
html • 0.02 MB
finance_1462601.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Tendernotice_2.pdf
PDF • 0.03 MB
Tendernotice_3.pdf
PDF • 0.03 MB
PAG.pdf
Tender Documents • 0.08 MB
FOT.pdf
Tender Documents • 0.02 MB
viewsbd.pdf
Tender Documents • 1.72 MB
AFFIDAVIT.pdf
Tender Documents • 0.06 MB
BOQ_1462601.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .