CA NO.CWE BLY/ GE (W) /30 OF 2025-26REPAIR TO ROAD IN CERTAIN AREA UNDER AGE BR-I AT GE (WEST) BAREILLY

Amount

M&L for repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area exc 400 sqm include raking over and grading the broken up surfaces exc 50 mm and n exc 100 mm deep to the proper camber etc. as required.and removing complete all as specified and directed.

M & L for Preparing , black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 Sqm, complete all as specified and directed.

Supplying, laying, spreading upto 75mm or less consolidated thickness of premix bituminous macadam carpet filling in depression (using 20mm graded stone aggregate) in single layer using mechanical paver using bituminous binder (VG-30) at the rate 4% by weight of total mix, laid/rolled and compacted/consolidated to required camber and gradient with 8 to 10 tone power roller to a uniform smooth surface complete all as specified and directed.

M&L for Preparing of black top bituminous surfaces by brushing with brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air pressure through air jet using air compressor to remove all loose dirt etc incl removing mud etc to a distance minimum 1.50m from edge of road and applying evenly a tack coat of bituminous primer using paving bitumen (VG-10) at the rate of 5 Kg per 10 Sqm of road surface by sprayer operated hot pressure mechanisum, supplying, laying, spreading 30mm consolidated thickness of semi dense asphaltic bituminous concrete carpet (VG-30) with 0.406 cum crushed and graded coarse aggregates with design mix formula with bitumen not less than 5.5% using paver with mechanical paver all as specified in clause device for automatic leveling and profile control within the specified tolerance as mentioned in SSR Part-I , rolled with 8 to 10 tone power Roller to uniform smooth surface and consolidated to required camber and gradient with power roller for uniform smooth surface complete all as specified and directed.

Material and labour for painting lines, dashes, arrows letter, marking etc of 3mm thick film on new surface or previously treated road surface with hot applied retro-reflective thermoplastic exc 10 cm wide n exc 15cm wide road marking paint (white/golden/yellow) conforming to MORTH (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160°C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed.

S&F in repairs, delineator 1200mm long made of 2 mm thick steel sheet rectangular OD size 100 x 100mm. Bottom plate 2mm thick of size 150 x 150 mm for firm grip welded to base. Top end closed with 2mm steel sheet. At top on both sides diamond grade cube corner micro white reflector of size 75 x 125mm laminated in 2mm deep cavity to make it scratch resistant. Post to have two bands all around of white/yellow/red reflective sheet of width 225mm by keeping black coat as bands for greater night visibility. All coated with heat process and baked to 120°C or powder coated to make all weather resistant and fixing in PCC(1:2:4) with size of block 150mm x 150mm x300mm deep including required excavation and earthwork complete all as specified and directed. eye. Note: The rate of PCC and earth work deemed to be included in this item and nothing shall be paid extra.

S&F in repair Cat eye,Solar reflective type of metal body alloy of size 100mmx100mmx20mm of red / yellow / white with PAMA striplens reflector of Model -DA 971 fixed with 100 gm epoxy mixture and placing the cats eye without applying excessive pressure and fixed as per manufacturers instructions complete all as specified and directed.

S&F Solar Cat eye aluminium alloy shall (100% water proofing design according to IP-65) of dimensions 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono-crystalline solar panel 2.4V/0.30 Watt, one Ni-Mh of Ni-cd rechargeable battery (1.2V /1600MA), six super bright LEDs with 10000 to 18000 mcd (Millicandela) complete as per manufacturers instructions etccomplete all as specified and directed.

S&F rubber speed breaker made from heavy duty rubber and polythylene with high resistance wear and tear property, height 3" for speed restriction, colours black and yellow combination , high reflective mark showing arrows in white marked on both side of yellow and black pieces, each side having each cap of size 250x1000x75mm and middle size of the speed breaker as 500x500 mm with four holes fixed with epoxy and heardner and bolt with epoxy and hardener as per manufacturers instructions complete all as specified & as directed

M & L for painting to surface of stone, concrete surfaces of any description over 10 cm girth or width not otherwise described with two coats of synthetic enamel paint over a coat of primer including prepration of old painted surfaces all as specified or as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded aggregate) as in sub base of flooring complete all as specified and directed

M&L for Machine pressed precast concrete with grey cement and pigments interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with 25mm thick river sand spreading and levelling in layers n exc 25 cm thick complete all as specified and directed.

M&L providing cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M/S Shree Sai Builders (BID ID -3351641)

The new hut furnitures (BID ID -3351842)

Builders Harpal (BID ID -3359979)

TEAM ACC INFRABUILD PRIVATE LIMITED (BID ID -3344755)