KIIFB KIIDC Improvements To Anthakarathodu In Tripunithura Municipality Landscaping and Arboriculture ,Construction Of Kiosk And Toilet And Operation and Maintenance For One Year

Amount

Appendix A: Landscaping & Tress

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

4.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

od238734/2020_2021 : Supplying, fitting, fixing and handing over the garden benches (Victoria Bench - Product Code) or equivalent as specified in the drawings of make ARIHANT or equivalent acceptable to engineer -in - chief, with prior approval, fully complete at site with all accessories, labours, power supply etc.

50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

50.6.1.7 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

8.12 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

od242751/2020_2021 : Supplying and planting of Hedge Plants approved by Engineer-in-charge at required spacing as shown in drawing. Rate shall include cost of plants soil work, manure and fertilizers used in top dressing, chemical and mechanical pest control, replacement of dead trees and for providing a pit sizes 50x50x70 cm , staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (15)neem (1.2 m to 1.5m height )

od242752/2020_2021 : Supplying and planting of trees approved by Engineer-in-charge at required spacing as shown in drawing. Rate shall include cost of plants soil work, manure and fertilizers used in top dressing, chemical and mechanical pest control, replacement of dead trees and for providing a pit sizes 50x50x70 cm taking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (12)cassia fistula (1.2 m to1.5 m height)

od242753/2020_2021 : Supplying and planting of trees approved by Engineer-in-charge to a specified locations as shown in drawing. Rate shall include Cost of plants, soil work inclusive of red soil, sand and manure mix staking and planting of trees sapling, replacement of dead trees and for providing a pit size 50 x 50x 70 cm and maintenance till the completion of project work.(4)Red Palms ( 1.2 m to1.5m Height.)

od242755/2020_2021 : Supplying and planting of trees approved by Engineer-in-charge to a specified locations as shown in drawing. Rate shall include Cost of plants, soil work inclusive of red soil, sand and manure mix staking and planting of trees sapling, replacement of dead trees and for providing a pit size 50 x 50 x 70 cm and maintenance till the completion of project work.( 1).Plumeria Alba white(2.0m to 2.5m)

od245318/2020_2021 : Supplying and planting of trees approved by Engineer-in-charge to a specified locations as shown in drawing. Rate shall include cost of plants soil work, manure and fertilizers used in top dressing, chemical and mechanical pest control, replacement of dead trees and for providing a pit sizes 50x50x70 cm and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (9)Oleander tall pink( 1.2 m to 1.5 m height)

od245319/2020_2021 : Supplying and planting of trees approved by Engineer-in-charge to a specified locations as shown in drawing. Rate shall include cost of plants soil work, manure and fertilizers used in top dressing, chemical and mechanical pest control, replacement of dead trees and for providing a pit sizes 50x50x70 cm, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (17)Indian blackberry or Jamun ( 1.2 m to 1.5 m height)

od244526/2020_2021 : Supplying and planting of shrubs approved by Engineer-in at specified location. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (13)Tabernaemontana green

od245315/2020_2021 : Supplying and planting of shrubs approved by Engineer-in at specified ground cover at required spacing. Rate shall include cost of plants soil work, manure and fertilizers used in top dressing, chemical and mechanical pest control, staking and maintaining the planting till it is handed over from the date of planting from the date of planting operating etc.(1)Rhoeo

od245317/2020_2021 : Supplying and planting of shrubs approved by Engineer-in at specified ground cover at required spacing. Rate shall include cost of plants soil work, manure and fertilizers used in top dressing, chemical and mechanical pest control, staking and maintaining the planting till it is handed over from the date of planting from the date of planting operating etc.(2)Lily (orange or white)

od244529/2020_2021 : Supplying and planting of shrubs approved by Engineer-in at specified ground cover at required spacing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (1)Aglonema

od258564/2020_2021 : Supplying and planting of creepers approved by Engineer-in at specified ground cover at required spacing. Rate shall include cost of plants soil work, manure and fertilizers used in top dressing, chemical and mechanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. Tubergia/Alameda/ Jasmin/Butterfly Pea

od246946/2020_2021 : supplying and laying the paspullam over the leveled and prepared surface.the rate shall include the cost of grass mat input manure and fertilizers used periodically for top dressing ,chemical and mechanical pest control and all post planting maintanance procedure complete till the complection of project 1)Buffallo grass

od249385/2020_2021 : Supplying SS Dustbins(3 Bins in each set) Double Cylinder (Duo) made of 18 gauge, SS-202 grade stainless steel hairline finish of size width 400 mm external dia., length 750 mm and height 750 mm with 2 nos. 300 mm diameter round openings at top with PU coating and Neoprene gasket ring at bottom. The dustbin should have removable cover and provision for clipping poly bags complete as per design and directions of Engineer in-charge. The dustbin shall display sticker indicating type of garbage and the top shall be finished with approved shade of PU coating as per the instructions of Engineer-incharge inclusive of testing charges if any and transportation to site

od265529/2020_2021 : Engaging labour for maintaining ,cleaning and watering trees/plants/shrubs/lawn in walkway for a period of 1 years after the completion of beautification work.

od273706/2020_2021 : Engaging Gardner for trees/plants/shrubs/lawn in walkway for a period of 1 years after the completion of beautification work.

50.18.9.4.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2

18.54.2 : Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122 mm long, weighing not less than 99 gms

Appendix B: kiosk and toilet

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.25.1 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

10.6.3 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover

10.7 : Providing and fixing ball bearing for rolling shutters.

9.57.3 : Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.75x47x1.70 mm

50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop

9.63.4 : Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:100x10 mm

9.66.1 : Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm

12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

12.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

od251884/2020_2021 : Supplying and installing Portlet Toilet Western Type (EWC) Lower end cabin (L 1000mm X W1000mm X H 2100mm) including door, Ventilator, Sanitation & plumbing inclusive of testing charges if any and transportation to site P as per the instructions of Engineer-in charge

od251885/2020_2021 : Supplying and installing Bio Digester Tank with 900LTR capacity over cement concrete bed 1:3:6 (1 cement : 3 fine aggregates : 6 broken stone 40 mm size) which will be paid separately.

od258697/2020_2021 : Supplying and installing soak pit for bio digester tank

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

50.18.9.3.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 25 mm dia 12Kfg/cm2

50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

Southern Tech

T K PRABHAKARAN

Bidder Name

Southern Tech

T K PRABHAKARAN

GRIDS, Digital Surveyors and Engineering Consultants