PROVN OF WALL PANELLING AT VB MESS HARD STANDING NEAR NEW SHOPING COMPLEX AND SPECIAL REPAIR TO PT DWAR IN SOMNATH STADIUM AT IMA DEHRADUN

Amount

Demolition of brick or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Walling of random, rubble, stone masonary, well bonded bedded and soilidly hearted and built in cement mortar (1:6) with and including P.C.C through bond stone in cement concreate 1:3.6 type C1 using 20 mm graded stone aggregate complete all as specified and directed.

Extra over stone walling for hammer dressing to face stone with max depression on face from straight edge held against the dressed surface not exc 20mm and dressing of face and joints as specified of random rubble walling uncoursed or brought upto coursed of lime or sand stone all as specfied and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed

Rendering 15 mm thick plaster on stone masonary surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Raking out joints/pointing to random rubble or polygonal rubble uncoursed or broughtupto courses work built in cement mortar complete all as specifiedd and directed.

PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching, cills, PCC gola, holdfast and the like including weathering, slightly rounded or chamfered angles and throating, including necessary from work complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Rolling and consolidation formation surface with power roller exceeding 5 tonne and not exceeding 8 tonne complete all as specified and directed.

75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

Polished rubberised precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid, jointed and pointed in grey cement with pigment to match the shade of tile over and including 25mm thick sand cushioning layer etc complete all as specified and directed.

Granite stone of any colour (of any type) 20mm thick machine cut (table rubbed & polished), as in floors, cooking platforms steps, jambs, pillars, window cills and like bedded with and including 20 mm thick screed bed in CM (1:4) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone complete all as specified and directed..

2nd class hard wood plain fillets, sectional area 6 sq cm & not exceeding 13 Sq cm, square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified & directed.

Non anodised aluminium rectangular hollow sections of size 50.8x 25.4mm x 1.16mm thick for panelling grid, to be placed at 600mm apart in both vertical and horizontal directions. Extra members at corners/junctions are also to be provided. The frame shall be fabricated & installed in position firmly with the help of suitable aluminium cleats, screws, clamps, rawl plugs complete all as specified and directed.

12mm thick plywood grade BWR, type BB, fixed with screws to aluminium frame work as in wall panelling complete all as specified and directed.

4mm thick Veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work complete all as specified and directed

1st class soft wood fillet bull nosed, splayed, chamfered or rounded on edge or face exc 6 & n. exc 13 Sqcm in section fixed with nails complete all as specified & directed.

Preparation of new or previously untreated wooden surfaces of any description, over 10cm width or girth and apply two coats of synthetic varnishing over a coat of wood filler liquid transparent complete all as specifed and directed

MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing including dismantling existing framed work complete all as directed.

Preparation of new plastered surfaces of wall and applying two coat of weather exterior emulsion paint (Apex paint of asian paint/weather proof of Berger) on walls over a coat of primer complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Rendering 10mm thick plaster on concrete surfaces in CM 1:4, surface finished even and smooth without using extra cement as in wall/ceiling etc complete all as specified and directed.

Extra over rendering or plastering for work in isolated widhts or in width or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting, drip moulds and similar wrok not exceeding 30 cm in width or grith including cutting to edges, all mitres and stopped ends etc complete all as specified and directed

Mild steel work in stairs (framed) including stringers, treades, landing, baluster, hand rails etc including cleats, brackets etc completeall as specifed and directed.

RCC 1:1.5:3, type -A1 , using 20mm graded crushed stone aggregate as in beams, cantilever bressummers lintel over 1.5 m span etc complete all as specified and directed.

RCC 1:1.5:3, type -A1, using 20mm graded crushed stone aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like complete all as specified and directed.

RCC 1:1.5:3, type -A1, using 20mm graded crushed stone aggregate as in pillar, column , posts struts complete all as specified and directed

Use and waste of formwork to sides of square, rectangular or polygonal pillar, column, posts struts for fair finished surfaces complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed

Use and waste of formwork to sides and soffits of floors or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports etc. and similar work of fair finished flat surface of concrete complete all as specified and directed.

Use and waste of form work to edges of concrete flat slab and shelves, not exceeding 20cm Thick for fair finish surface complete all as specified and directed.

Mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M/S RAJESH KUMAR GOYAL

Aron Water Proofing and Pest Control