Annual Rate of Building Works Under R&B Division Morbi

Sr.No. Description of Item Unit

Excavation for foundation upto 1.5 mt. depth including sorting out and

1 stacking of useful materials and disposing of the excavated stuff for all Cum.

Excavation for foundation upto 1.5 mt. depth including sorting out and

2 stacking of useful materials and disposing of the excavated stuff for all Cum.

Excavation for foundation upto 1.5 mt. depth including sorting out and

3 stacking of useful materials and disposing of the excavated stuff for all Cum.

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing etc. Complete

Providing and laying cement concrete 1 : 4 : 8 (1 - Cement : 4 - coarse

sand : 8 - hand broken stone aggregates 40 mm. nominal size) and curing

complete excluding cost of formwork in (A) Foundtion & Plinth.

Providing and laying cement concrete 1: 2 : 4 (1 - Cement : 2 - Coarse

sand : 4 - crushed stone aggregates 20 mm. nominal size) and curing

complete including cost of formwork in wall caps and copping.

Providing and laying cement concrete 1: 11/2 : 3 (1 - Cement : 11/2 -

Coarse sand : 3 - black stone crushed aggregates 20 mm. nominal size)

8 and curing complete including cost of formwork in (A) Foundation Footing Cum.

base of Column / Mass concrete.

Providing and laying cement concrete 1: 11/2 : 3 (1 - Cement : 11/2 -

Coarse sand : 3 - black stone crushed aggregates 20 mm. nominal size)

and curing complete including cost of form work but excluding cost of

reinforcement in (B) Slab, landing, shelves, Balconis, Lintels, Beams,

Girders and Cantilever Upto floor two level.

Providing and laying cement concrete 1: 11/2 : 3 (1 - Cement : 11/2 -

Coarse sand : 3 - black stone crushed aggregates 20 mm. nominal size)

10 and curing complete including cost of form work but excluding cost of Cum.

reinforcement in (C) Columns, Pillars posts and struts upto floor two level.

Sr.No. Description of Item Unit

Providing and laying cement concrete 1: 11/2 : 3 (1 - Cement : 11/2 -

Coarse sand : 3 - black stone crushed aggregates 20 mm. nominal size)

11 and curing complete including cost of form work but excluding cost of Cum.

reinforcement in (D) Staircase excluding landing upto floor two level.

Providing and laying reinforcement for R. C. C. work and bending, binding

and placing in position completed up to floor two level Thermo

Mechanical Treated Bars as per I. S. statndard.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.cm. in foundation and plinth in Cement

Mortar 1 : 6 (1- Cement : 6 - fine sand) (B) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.cm. in foundation and plinth in Cement

14 Mortar 1:6(1-Cement:6-fine sand) Extra for brick work in super structure Cum.

above plinth level for all floor(B) Conventional

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg. / Sq.cm. in Cement mortar 1 : 5 (1 - Cement :

15 5 - coarse sand) in foundation and plinth Extra for Half brick masonry in Sq.mt

super structure for all floor (B) Conventional.

Uncoursed Rubble Masonry with hard stone of approved quality in

foundation and plinth in cement mortar 1 : 6 (1- cement : 6 - coarse sand

) including levelling up etc. complete.

Providing wood work in frames of Doors windows cleare story windows

17 and other similar works, wrought framede & fixed in position. (A) Indian 10 Cudm.

Providing wood work in Trusses , Purlins Raffer posts, Post plates wall

18 plates and the like wrought, frameo hoisted and fixed in position. (A) Cudm.

Indian Teak Wood

Providing wood work in frames of false- ceiling, partitions etc. sawn and

19 put up in position.. (A) Indian Teak Wood Cudm.

Providing wood work in frames of Doors windows cleare story windows

20 and other similar works, wrought framede & fixed in position. (A) Indian Cum.

25 mm. thick wooden shelves supported on 40 mm. x 40 mm. x 6 mm. T

or L iron brackets fixed at suitable distances but not exceeding 75 cm.

apart with Mango wood or equivalent quality.

Providing and fixing M.S. round or square bars with M.S.flats at required

22 spacing in wooden frames of windows and clerestory windows. Kg.

Sr.No. Description of Item Unit

Providing and fixing Fly proof galvanised M.S. wire gauge of I.S.l gauge

designation 85 G. with wire of dia.0.56 mm. to windows and celevating

23 windows including 60 x 20 mm. beading of teak wood. Sq.mt

Providing and fixing 35 mm. thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm. x 7 cm.

size including anodized alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc.

complete. (i) Fully Glazed.

Providing and fixing 35 mm. thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm. x 7 cm.

size including anodized alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc.

complete. (ii) Fully Panelled.

Providing and fixing 35 mm. thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm. x 7 cm.

size including anodized alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc.

complete. (iii) Partly panelled and partly glazed.

Providing and fixing FRP Frame size 100 x 50mm and 28mm thick FRP

Depress pannel shutter having extra reinforcement on sides and edges

and in gel coat finish. The core of the shutter is to be filled up with

injected fire retardant grade polyurethane foam done insitu alongwith

embedded wooden pieces for stiffening and also for taking hinges and

27 fixtures. The whole FRP Frame and shutter is to be water proof, weather Sq.mt

proof, termite proof and resistance to mild acid/ Alkali. Rates are to be

inclusive of S.S. hinges with necessary screws and alluminium fixtures and

Providing and fixing P. V. C. False ceiling consisting of 600 MM x 600 MM,

3 MM. thick P. V. C. Sheet used as panel insert in a frame work made

using anodised alluminium "T" section of size 25 Mm x 25 MM. 19 gauge

or 1 Mm. thick in square pattern of Grid sizes of 600 x 600 mm. The

alluminium frame work is supported from the ceiling with the help of G.

I. Hook and G. I. wire 6 MM M. S. rods of required sizes to maintain

28 proper level etc. The alluminium frame work is supported supported on Sq.mt

the side wall with the use of alluminium :L: section of size 25 x 25 MM

angles etc. complete as per direction of Engineer - in - charge. (A) P. V. C.

Plain Colour False Ceiling with Grid type with alluminium frame.

Sr.No. Description of Item Unit

Providing and fixing P. V. C. Flase ceiling consisting of 600 MM x 600 MM,

3 MM. thick P. V. C. Sheet used as panel insert in a frame work made

using anodised alluminium "T" section of size 25 Mm x 25 MM. 19 gauge

or 1 Mm. thick in square pattern of Grid sizes of 600 x 600 mm. The

alluminium frame work is supported from the ceiling with the help of G.

I. Hook and G. I. wire 6 MM M. S. rods of required sizes to maintain

proper level etc. The alluminium frame work is supported supported on

the side wall with the use of alluminium :L: section of size 25 x 25 MM

angles etc. complete as per direction of Engineer - in - charge. (C) P. V. C.

Plain Colour False Ceiling with Flush type with alluminium frame.

Steel work, riveted in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of read lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

30 plates or angle cleats as in main and cross beams. Hips and jack brafters, Qtl.

purlins conneted to common rafters and the like.

Steel work, riveted in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of read lead paint.

(B) In trussses and trussed purlins, upto 25 M. span and 15 M. ovarall

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of read lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like.

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of read lead paint.

(D) In trussses and trussed purlins, upto 25 M. span and 15 M. ovarall

Providing and fixing sheet glass ordinary quality bedded in putty and fixed

with wooden beadings including the cost of wooden beadings of first-

34 class teak wood and necessary cutting of glass. (3) 3mm thick Sq.mt

Providing and fixing sheet glass ordinary quality bedded in putty and fixed

with wooden beadings including the cost of wooden beadings of first-

35 class teak wood and necessary cutting of glass. (4) 4mm thick Sq.mt

Sr.No. Description of Item Unit

Providing and fixing sheet glass ordinary quality bedded in putty and fixed

with wooden beadings including the cost of wooden beadings of first-

class teak wood and necessary cutting of glass. (3) 3mm thick. Deduct for

difference in cost of materials and labour involved in method of glazing if

changed in item No. 13 to (A) Front and back puttied and sprigged or

fixed with glazing pins.

Providing and fixing sheet glass ordinary quality bedded in putty and fixed

with wooden beadings including the cost of wooden beadings of first-

class teak wood and necessary cutting of glass. (4) 4mm thick. Deduct for

37 difference in cost of materials and labour involved in method of glazing if Sq.mt

changed in item No. 13 to (A) Front and back puttied and sprigged or

fixed with glazing pins.

Providing and laying white glazed tiles 6 mm. thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6 mm. thick in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

40 L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing Sq.mt

and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of

steps, Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement

41 : 3 coarse sand) and jointed with gray cement slury including rubbing and Sq.mt

polishing etc. complete.

Providing and laying rough chiseled dressed stone flooring over 20mm

thick base of cement mortar 1:5 (1-Cement : 5-coarse sand) or L.M. 1:1.5

42 including pointing with cement mortar 1:2 (1-cement : 2-stone dust) etc. Sq.mt

complete. (A) 25 mm. thick.

Providing and laying rough chiseled dressed stone flooring over 20mm

thick base of cement mortar 1:5 (1-Cement : 5-coarse sand) or L.M. 1:1.5

43 including pointing with cement mortar 1:2 (1-cement : 2-stone dust) etc. Sq.mt

complete. (B) 40 mm. thick.

Sr.No. Description of Item Unit

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse

sand : 4-graded stone aggregate 20mm nominal size) laid in one layer

44 finished with a floating coat of neat cement. (B) 50 mm. thick. Sq.mt

Ceramic flooring tiles 8 MM. thick in flooring treads of steps & landing

laid on a bed of 12 MM. thick cement mortar 1 : 3 (1 - cement : 3 - coarse

45 sand) finished with a flush pointiung in white cement. Sq.mt

Ceramic flooring tiles 8 MM. thick in skirting, risers of steps and dedo on

46 10 MM. thick cement plaster 1 : 3 (1 - cement : 3 - coarse sand) and Sq.mt

jointed with white cement slurry.

Providing and laying 24" x 24" Vitrified 8 MM. thick in flooring over

mm. (Average) base of cement Mortar 1 : 6 ( 1 - Cement : 6 - Coarse Sand

) on new surface or fixing on existing flooring by adhesive materials

including dismenatlling of existing flooring and jointed with colour

cement slurry including finished with flush pointing and cleaning the

surface etc. complete for Light Shade.

Providing asbestos cement sheets roofing fixed with G. I. plain and

48 bitumen washer complete excluding the cost of purlins, rafters and Sq.mt

trusses. (i) 7.5mm thick.

Providing and fixing 150 mm. wide 450 mm. over all semicircular plain G.

I. sheet class - 3 gutter with Iron brackets 40 mm. x 3 mm. size Bolts,

49 Nuts, washers etc. including making necessary connection with rain water Sq.mt

pipes. (i) 0.80 mm thick Sheet.

Providing and fixing tiles roofing with manglore tiles including teak

50 reepers of sizes 50mm x 25mm. Rmt.

Providing and fixing poy carbonate 4 mm. sheets to round shape roof

with M. S. Purlin of 25 x 25 mm. of 16 gauge this square pipe providing at

2.20 mt. center to center round shape and verticale three support

51 including all labour charges riveting, bolting, welding failing the joints with Sq.mt

silicon for water proof roof and oil painting with printer etc. complete as

per detailed drawing and as directed.

Providing 10 mm. thick cement plaster in single coat on brick / concrete

walls for interior plastering for all floor level and finished even and

52 smooth in (i) Cement mortar 1:3 (1- cement : 3-sand) Sq.mt

Providing 15mm thick cement plaster in single coat on brick/concrete

walls for interior plastering for all floor level and finished even and

53 smooth in (i) Cement mortar 1:3 (1- cement : 3-sand) Sq.mt

Sr.No. Description of Item Unit

Providing 15mm thick cement plaster in single coat on brick/concrete

walls for interior plastering for all floor level and finished even and

54 smooth in (i) Cement mortar 1:4 (1- cement : 4-sand) Sq.mt

20 mm. thick sand faced cement plaster on walls for all height above

ground level consisting of 12 mm. thick backing coat of C. M. 1 : 3 (1-

55 cement : 3 - sand) & 8 mm. thick finishing coat of C. M. 1: 1 (1- cement : 1 Sq.mt

- sand) etc. complete.

Pointing on Uncoursed stone masonry with cement mortar 1:3 (1-cement

56 : 3-coarse sand). (A) Flush pointing Sq.mt

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

57 mortar 1:1 including neat cement finishing, watering etc. complete. Sq.mt

White washing with lime on wall surface (two coats) to give an even

58 shade including thoroughly booming the surface to remove all dirt, dust; Sq.mt

mortar drops and other foreign matter.

Colour washing with lime on wall surface (two coats ) over and including a

primary coat of white washing to give an even shade after through

59 brooming the surface to remove all dirt, dust, mortar drops and other Sq.mt

foreigh matter.

Removing dry or oil bound distemper by a washing and scraping and sand

60 papering the wall surface smooth including necessary repairs to scratches Sq.mt

Distempering (Two coats) with oil bound distemper of approved brand

and manufacture and of required shade on wall surfaces to give an even

shade, over and including a priming coat with distemper primer of

61 approved brand and manufacture after thoroughly brushing the surface Sq.mt

free from mortar dropping and other foreign matter and also including

preparing the surface even and sand papered smooth.

Finishing wall with water proofing cement paint of on wall surface (Two

coats) to give an approved brand & manufacture and of required shape

62 even shade after thoroughly brushing the surface to remove all dirt and Sq.mt

remains of loose powered materials..

Painting Exterior wall acrylic emulsion ACE or equivalent quality on out

side wall by applying one coat primer white cement base coat and

applying to coats of acrylic emulsion paint of approved brand and

63 manufacture even shade after throatily brushing the surface to remove Sq.mt

all dirt and remains of loose powder materials etc. complete.

Finishing Wall with Weather Proof Exterior Emulsion Paint on Wall

Surface (Two Coats) to give an required shape even shade after

64 thoroguhly brushing the surface to remove all dirt, and remains of loose Sq.mt

powdered materials etc. complete

Sr.No. Description of Item Unit

Applying Two Coats of Birla or Asian Acrylic Lappy (Putty) and two coats

of primer of approved brand and manufacture on New Wall Surface to

65 give an even shade including thoroughly brushing the surface free from Sq.mt

mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

66 including throughly brushing the surface free from mortar droppings and Sq.mt

other foreign matter and sand papered smooth.

Painting three coats (including priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even shade

67 including cleaning the surface an even shade including cleanicn the Sq.mt

surface of all dirt, dust and other foreign matter.

Painting two coats (excluding priming coat) on previously painted steel

and other metal surface with enamel paint, brushing to give an even

68 shade including cleaning the surface of all dirt, dust and other foreign Sq.mt

matter for every subsequent coat of paint.

Painting two coats (excluding priming coat) on previously painted wood

and wood based surface with enamel paint, to give an even shade

including cleaning the of all dirt, dust and other foreign matter for every

subsequent coat of paint.

Painting three coats (excluding priming coat) on new wood and wood

based surface with enamel paint, interior to give an even shade

70 including cleaning the surface of all dirt, dust and other foreign matter Sq.mt

sand papering and stopping for every subsequent coat of paint.

Polishing with french polish on new wood and wood based surface to give

an even surface including cleaning, the surface of all dirt, dust and sand

71 papering smooth and including a coat of wood filler. Sq.mt

Demolition and disposal of unserviceable materials with all lead and lift.

(ii) Unreinforced cement concrete.

Demolition of Brick work and stone masonry including stacking of

serviceable materilas and disposal of unserviceable materials with all lead

and lift. (ii) In Cement Mortar.

Demolition of terrace including stacking of serviceable materilas and

74 disposal of unserviceable materials with all lead and lift. (i) Brick tile Sq.mt

Dismentling doors, windows, venti- lators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift. (i) Not exceeding

Sr.No. Description of Item Unit

Scraping oil paint from steel and other metal surface and making the

76 surface even (with Hand Scraping.) Sq.mt

Providing and fixing 1.20 Mt. high fencing with 1.50 Mt. high 10 cmn. X

cm. C. C. 1 : 2 : 4 precast post (3.00 mm. steel br 4 Nos.) fix at 2.5 mt. C /

C with five Horizontal lines and two diagonals of galvanized steel brbed

77 wire weighting 9.38 Kg. per 100 Mt. strained and fixed to posts with G. I. Rmt.

Staples including fixing the posts in ground with 0.45 M x 0.45 M x

block in C. C. 1 : 2 : 4 etc. complete 100 mt. length.

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M. S.

angle post 40 mm. x 40 mm. x 6 mm. and oil painting 3 coats fixed at

Mt. C/C. with five Horizontan lines and two diagonals of galvanised steel

78 barbed wire weighting 9.38 Kg. per 100 Metre, strained & fixed to posts Rmt.

with G. I. staples including fixing the postsin ground with 0.5 M x 0.5 M x

0.5 M. block in C. C. 1 : 5 : 10 etc. complete.

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with I. S. I specification.

Carring out timber treatment to all wood work including drilling holes and

spraying oil based chemical solution on surface of timber work for termite

control including labour and material etc. complete.

Applying general insecticide pest control treatment to floors, cup -boards

etc including labour material etc. complete.

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

(Medium grade) of the following nominal bore, tube fitting and clamps

82 including making good the wall ceiling and floor. (A) 15 mm. Rmt.

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

(Medium grade) of the following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor. (C) 25 mm.

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

(Medium grade) of the following nominal bore, tube fitting and clamps

84 including making good the wall ceiling and floor. (E) 40 mm. Rmt.

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

(Medium grade) of the following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor. (F) 50 mm.

Providing and laying in trenches galvanised mild steel tubes (Midium

grade) of the following nominal bore, and tube fitting (Earthwork in

trenches to be measured and paid for separately) (C) 25 mm.

Sr.No. Description of Item Unit

Providing and laying in trenches galvanised mild steel tubes (Midium

grade) of the following nominal bore, and tube fitting (Earthwork in

trenches to be measured and paid for separately) (D) 40 mm.

Providing and laying in trenches galvanised mild steel tubes (Midium

grade) of the following nominal bore, and tube fitting (Earthwork in

trenches to be measured and paid for separately) (E) 65 mm.

Providing and laying in trenches galvanised mild steel tubes (Midium

grade) of the following nominal bore, and tube fitting (Earthwork in

trenches to be measured and paid for separately) (F) 80 mm.

Providing and fixing plastic seat and cover for wash down water closer

with C. P. brass hinges and rubber buffers.

Providing and fixing C. P. brass waste for wash basin or sink. (A) 32 mm.

Providing & fixing C. P. brass shower rose with 15 mm. or 20 mm. inlet.

(A) 100 mm dia. Each

Providing and fixing 600 mm. x 450 mm. bevelled edge mirrror of superior

glass mounted on 6 mm. thick A. C. sheet or plywood sheet and fixing to

wooden pluge with C. P. brass screws and washers.

Providing and fixing screw down bib taps of following size. (B) Brass

94 chromium plated screws down Bib Tap. (i) 15 mm. dia. No.

Providing & fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15 mm. dia.

Providing and fixing brass screw down stop tap. (i) 15 mm. dia.

Providing and fixing Gun metal check or non-return fullway wheel valve.

97 (C) 25 mm. dia. No.

Providing and fixing Gun metal check or non-return fullway wheel valve.

98 (E) 40 mm. dia. No.

Providing and fixing chromium plated brass half trun flush cock of

99 approved quality including fixing in pipe line etc. complete.(iii) 32mm dia. No.

Providing and fixing coloured Anodised Aluminium section sliding window

with two track frame size 82.50 x 44.00 mm. and 1.7 mm. average thick

and fully glazed transparent glass shutters with coloured anodised

aluminium section framing 43.25 and 1.7 mm. average thick 8.00 mm.

thick aluminium glazing clips and rubber bidding and including anodised

aluminium fixture and fastening and hold fasting with coach bolt etc.

Sr.No. Description of Item Unit

Providing and fixing PVC Square water tank of Sintex company on wall

with necessary angle required with necessry G. I. Fitting over flow pipe

bol valve, clamp nipple as directed.

Providing and laying inter locking precast tiles of 60 mm. x to 65 mm. in

floors and laying 20mm thick bed of cement mortar 1:6 (1-cement : 6-

102 coarse sand) or L.M. 1:1.5 jointed with neat cement slurry with pigment Sqm.

to match the shade of tiles complete

Providing and fixing 25 mm. thick polished Kota Stone bothside polished

103 selves in wall clip bound includfing groove in wall fixing polishing both Sq.mt

side etc. complete.

Providing and fixing Cup board using Indian Teak wood frame of 70 x

104 mm. and fixing 19 mm. thick commercial ply wood shutter including Sq.mt

fixtures, oil painting etc. complete.

Providing and fixing Pre laminated particle board shutter of 18 mm. thick

including fixtures and fastening including non teak wood frame size of

105 x 30 mm. fixing in Kota stone by drilling and screw as directed. Sq.mt

Providing and replacing existing damaged C. B. shutter using both side -

mm. thick commercial plywood non teak wood including fixtures and

106 fastening and oil paint etc. complete with all labour and materials. Sq.mt

Providing cooking platform of 60 cm. width and 70 cm. height including

25 mm. thick side polished Kota Stone vertical and horizontal support and

107 including fixing of steel sink cutting in plateform as per design including Sq.mt

cost of cement (Using granite stone over Kota slab top)

Providing cooking platform of 60 cm. width and 70 cm. height including

25 mm. thick side polished Kota Stone vertical and horizontal support and

108 including fixing of steel sink cutting in plateform as per design including Sq.mt

cost of cement (Using Marble stone over Kota slab top)

Providing cooking platform of 60 cm. width and 70 cm. height including

25 mm. thick side polished Kota Stone vertical and horizontal support and

109 including fixing of steel sink cutting in plateform as per design including Sq.mt

cost of cement (Curing Single stone )

Sr.No. Description of Item Unit

Constructing brick masonry chamber for underground C. I. Inspection

chamber & bends with bricks having crushing strength not less than

35Kg./ Sq.Cm in C.M. 1 : 5 C. I. cover with frame (Light duty) 455 mm. x

610 mm. intenal dimensions, total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg. and Wt. of frame 15Kg. ) R.C.C. top

slabe with 1 : 2 : 4 mix (1 - cement : 2 - coarse sand : 4 - graded stone

aggregate 20 mm. size) foundation concrete 1 : 5 : 10 inside plaster

110 mm. thick with cement mortar 1 : 3 finished smooth with a floating coat No.

of neat cement on walls & bed concrete etc.complete. Including precast

cement concrete 1 : 2 : 4 cover with frame of 5.00 mt. capacity inside

dimension 455 mm. x 610 mm. and 450 mm. deep for single pipe line.

Providing and fixing Aluminium sliding three track window and top fix

vewnt having size 92 mm. x 31.75 mm. including shutter frame size

mm. x 40 mm. sliding type on for S. S. wire gauge shutter including rubber

111 bidding PVC virgin, "P" Smoke Gray " 4" thick glass maruti type handle, Sq.mt

bearing, fixtures and fastening etc. including all labour and materials etc.

Providing and fixing Aluminium sliding four track window having frame

size 122 mm. x 31.75 mm. including shutter frame size 18 mm. x 40 mm.

sliding type on track for S. S. wire gauge shutter and top for vent having

frame size 101.60 x 44.45 mm. size extra angle at bottom of 25.00 x

mm. including rubber bidding PVC virgin, "P" Smoke Gray " 4" thick glass

maruti type handle, bearing, fixtures and fastening etc. including all

labour and materials etc. complete.

Providing and fixing Aluminium sliding three track window having frame

size 92 mm. x 31.75 mm. including shutter frame size 18 mm. x 40 mm.

sliding type on track for S. S. wire gauge shutter and top for vent having

frame size 63.50 x 38.10 mm. size extra angle at bottom of 30.00 x

mm. including rubber bidding PVC virgin, "P" Smoke Gray " 4" thick glass

maruti type handle, bearing, fixtures and fastening etc. including all

labour and materials etc. complete.

Providing and fixing Aluminium frame doors and shutters with fixed

window frame size 63.55 mm. x 38.10 mm. having weight 1.094 Kg./ Mt.

shutter frame vertical size 44.45 mmm. x 47.62 mm having weight

Kg. / Mt. and horizontal size 63.50 x 38.10 mm. having weight 1.608 Kg. /

Mt. with 5 mm. thick plain glass & 12 mm. thickBison panel with

necessary door closer, fixtures and fastening rubber biding clips etc.

Sr.No. Description of Item Unit

Providing and fixing Aluminium section partition with frame size

mm x 38.10 mm. having wt. 1.094 for fixed partition including 5 mm.

115 thick transparent glass and 12 mm. thick Bison panel and Top of partition Sq.mt

3" x 3" aluminium 6 mm. dia jali including jumbo rubber biding clips etc.

Providing and fixing suspended Flase ceiling of fiber reinforced plster of

paris board of 12 to 19 mm. thick as required work as per details and

drawing supported by frame work as press formed elements made from

24 gauge thick G. I. sheet consisting "C" section runners of size 30 x 50 x

30 mm. at 90 mt. center to center or closer at necessary to drive required

116 shape of ceiling cross furring channel of size 70 x 10 mm. fixed to 'C' Sq.mt

runner at 0.45 mt. center to center or closer as necessary by C. I. 'L' angle

of size 19 x 19 mm. of 6 mm. dia M. S. bars to the ceiling at 0.90 mt. etc.

or closer as necessary the whole work cvarried out as directed.

Providing and fixing suspended gilto of fiber reinforced plster of paris

board of 12 to 19 mm. thick as required work as per details and drawing

supported by frame work as press formed elements made from 24 gauge

thick G. I. sheet consisting "C" section runners of size 30 x 50 x 30 mm. at

90 mt. center to center or closer at necessary to drive required shape of

117 ceiling cross furring channel of size 70 x 10 mm. fixed to 'C' runner at 0.45 R.mt.

mt. center to center or closer as necessary by C. I. 'L' angle of size 19 x

mm. of 6 mm. dia M. S. bars to the ceiling at 0.90 mt. etc. or closer as

necessary the whole work cvarried out as directed.

Providing and fixing PVC Flash tank including all labour and materials etc.

118 complete. No.

Providing and fixing 35 mm. thick shutters for doors, window and cear

story windows including black enamaled M. S. butt hinges with necessary

screws. (A) Indian Teak wood (i) Fully Panelled (Aluminium fitting and

Providing and fixing 35 mm. thick shutters for doors, window and cear

story windows including black enamaled M. S. butt hinges with necessary

screws. (A) Indian Teak wood (iii) Partly Panelled and Partly glazed.

Providing and fixing 35 mm. thick shutters for doors, window and cear

story windows including black enamaled M. S. butt hinges with necessary

screws. (A) Indian Teak wood (ii) Fully glazed.

Providing and fixing 30 mm wire gauge shutters using galvanised M.S.

wire of I.S. gauge designation of 85 G. with wire of 0.56 mm dia, for

Doors, windows and clearstory windows including bright finished or / and

black enamellede M.S. butt hinges with necessary Mango wood or

equivalent quality.

Sr.No. Description of Item Unit

Providing and fixing 30 mm wire gauge shutters using galvanised M. S.

wire of I.S. gauge designation of 85 G. with wire of 0.56 mm dia, for

Doors, windows and clearstory windows including anodised alluminium

butt hinges with necessary screws.

Providing and fixing Non teak wood 30 mm. thick fly proof shutter with

Non teak wood frame 50 x 40 mm. size including two coats of oil paint

and 1 coat of primer and aluminium fitting and fastening etc. complete.

Providing and fixing Teak wood 30 mm. thick fly proof shutter with Teak

wood frame 50 x 40 mm. size including two coats of oil paint and 1 coat

of primer and aluminium fitting and fastening etc. complete.

Reapirs to doors and window shutters by providing necessry teak wood

member and necessry hardware fitting and including touching the new

126 memmber by matching existing oil painting shed etc. complete as Sq.mt

directed including all cost of labour and materials.

Reapirs to doors and window shutters by providing necessry non teak

wood member and necessry hardware fitting and including touching the

127 new memmber by matching existing oil painting shed etc. complete as Sq.mt

directed including all cost of labour and materials.

Providing and fixing flush door shutters, solid core construction with

frame of first class hard wood with cross band and face veneer or

plywood face panels, including anodised aluminium but hinges with

128 necessary screws, (B) Non decorative type and block board core anodised Sq.mt

aluminium butt hinges in flush door shutters (2) 35 mm. thick.

Repairs to flush door, cupboard shutter nd furniture by replacing

damaged plywood and providing new 4 mm. thick plywood including

129 fixing necessary fixtures and fastening and oil painting and french Sq.mt

polishing etc. complete as directed including all cost of labour and

Providing and fixing new Acrylic sheet, 4 mm. thick glass instead of

damage Acrylic sheet, glass of window and door shutter with necessary

putty, pins, nails etc. complete as directed including all cost of labour and

Repairs to rolling shutters including clening, oiling, greasing, servicing and

131 fitting in original position as directed including all cost of labour and Sq.mt

Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S. laths inter-locked together through their entire length and

jointed together at the ends by end locks mounted on specially designed

pipe shaft with bracket plates, guide channels and arragements for inside

Sr.No. Description of Item Unit

Providing and fixing in position callapsible steel shutters with vertical

channels 20 x 10 x 2 mm. braced with flat iron diagonals 20 x 5 mm. size

with top and bottom rails of T- iron 40 x 40 x 6 mm. with 38 mm. dia,

133 steel pulleys complete with bolts, nuts, locking arrangements, stoppers Sq.mt

handles including applying a priming coat of read lead paint.

Reapirs callapsible gate including cutting the corrosive channels bearing,

railing, welding, locking arrangements, with transporting and fitting in

original position as directed including cost of labour and materials.

Reapirs to A. C. sheet roof by providing new 6 mm. A. C. sheet instead of

damage sheet and providing Lodhia vata etc. complete as directed

including all cost of labour and materials.

Reapirs to Terrece by using water proofing agent including cleaning the

136 terrace as directed including all cost of labour and materials. Sq.mt

Reapirs to M. T. roof including replacing old damage Manglore tiles

providing new M. T. repairs to batten patti, Lodhiya vata as directed

including all cost of labour and materials (Excxluding cost of rafter.)

Providing 22 gauge aluminium sheet in existing door, window shutter as

138 directed including cost of labour and materials. Sq.mt

Providing and fixing Orrissa Pan 580 mm. size including necessary

connection P - Trap, chromium plated brass flush cock 25 mm. dia etc.

complete as directed including all cost of labour and materials.

Providing and fixing flat back wash basin with C. I. or M. S. brackets

including providing C. P. brass waste 32 mm. dia, pillar code 15 mm. dia,

140 plastic waste pipe P.V. C. connection brass stop cock 15 mm. dia etc. No.

complete as directed including all cost and labour and materials.

Providing and fixing cast iron spigot and socket soil, waste and ventilating

141 pipes of the following nominal size. (B) 75 mm. dia. R.mt.

Providing and fixing cast iron spigot and socket soil, waste and ventilating

142 pipes of the following nominal size. (C) 100 mm. dia. R.mt.

Providing and laying (to level or slopes) & jointing with stiff mixture of

Cement Mortar in proportion 1 : 1 salt glazed stoneware pipes including

testing of pipes and joints complete. (A) 100 mm. dia.

Providing and laying (to level or slopes) & jointing with stiff mixture of

Cement Mortar in proportion 1 : 1 salt glazed stoneware pipes including

testing of pipes and joints complete. (B) 150 mm. dia.

Sr.No. Description of Item Unit

Cleaning the septic tank including digging the sludge and disposing away

Providing sock pit of 2.00 Cu.M. Volume including excavating and filling

brickbats with dry masonry work at top for 45cm. height including

146 covering the top with stone including providing vatas in C.M. 1:3 with Cum.

finishing, curing etc. complete as directed.

Providing and fixing Pre cast R. C. C. 8 Cm. thick manhole cover with

handle size 60 x 45 cm. as directed etc. complete.

Providing and fixing Pre cast R. C. C. 8 cm. thick manhole cover with

handle size 90 x 60 cm. as directed etc. complete.

Cleaning the over head tank R. C. C. tank, msonry tank, steel tank, P. V. C.

tank and asbestos tank of Government Non Residential Building and

Residential Building icamps with brush and cotton cloth as directed.

Cleaning the chock up drinage line of 100 mm. and 150 mm. dia S. W.

pipe as directed only labour work.

Cleaning and cutting the small grss of ground and disposing as direced.

Loading and unloading the debris from ground and disposing away from

152 Nagar Palika limit by own vehicle as directed Trip

Providing and fixing Urinal 430 mm. x 260 mm. x 350 mm. size white

colour flat back including waste pipe, waste coupling, and necessary

fitting as directed including of all cost labour and materials.

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside dia, low densidy,

154 complete with special falnge compression type fittings, wall clips etc. Rmt.

including making good the wall ceiling and floor. (B) 25 mm.

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside dia, low densidy,

155 complete with special falnge compression type fittings, wall clips etc. Rmt.

including making good the wall ceiling and floor. (C) 32 mm.

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside dia, low densidy,

156 complete with special falnge compression type fittings, wall clips etc. Rmt.

including making good the wall ceiling and floor. (D) 40 mm.

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside dia, low densidy,

157 complete with special falnge compression type fittings, wall clips etc. Rmt.

including making good the wall ceiling and floor. (E) 50 mm.

Sr.No. Description of Item Unit

Providing and fixing PVC pipe of 6 Kg./Sq.cm. pressure pipe 63 mm. dia

158 including necessary fitting directed. Rmt.

Providing and fixing PVC pipe of 6 Kg./Sq.cm. pressure pipe 75 mm. dia

including necessary fitting directed.

Providing and fixing PVC pipe of 6 Kg./Sq.cm. pressure pipe 90 mm. dia

including necessary fitting directed.

Providing and fixing PVC pipe of 6 Kg./Sq.cm. pressure pipe 110 mm. dia

including necessary fitting directed.

Providing erecting fixing double coated Syntex of Equivalent PVC (ISI)

162 Mark Water Tank of Required Capaicty each with all necessary fittings & Liter

connection etc.complete on Terrace.

Providing and fixing Railway type push cock 15 mm. dia as directed

including all cost of labour and materials.

Repairs to Deepwell andHand pump pipe line including lifting out and

164 providing necessary fitting and refitting in bore as directed with all cost of No.

labour and materials.

Providing and fixing standard quality door closer heavy duty as directed

165 including all cost of labour and materials. No.

Providing and fixing standard quality magnetic door catcher as directed

including all cost of labour and materials.

Providing and fixing standard quality Martiz lock as directed including all

cost of labour and materials.

Supplying and stacking of soft murrum on site including filling the

168 standard size boxes (No deduction of voids) with average 5.00 to 10.00 Cum.

Km. lead as directed.

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. (i) Murrum

Supplying and stacking of standard quality brunt clay building bricks on

170 site with an average 40 Km. lead. as directed (Conventional brick size = Nos.

Preparing the ground including plugging and bricking of cold, removal of

rubbish, dressing and supplying carpet lone grass roots and planting at

cm. apart including supplying of farm yard manner at a rate rate of

Providing and fixing tree guard 0.60 mt. round 2.00 mt. height fabricted

with M. S. angle iron 30 x 30 x 3 mm. and steel wire 3 mm. dia welded

and fabricated as per design in to valves bolted to gather.

Cleaning open ground / ground by removing bushes, grasses, shrub

stumps and other waste materials on ground deposited / laying by land

user including disposing of this waste materials within municipal limit.

Sr.No. Description of Item Unit

Providing and fixing gypsum board suspended ceiling system, to be used

in stepped / Angle / covered any other design form, as per details

drawing, all section shall be manufactured from galvanized steel as per

company specification, suspension points and clips can be loaded to take

be minimum safe load of 50 Kg. / Sq. cm. the system consist of range of

metal component supporting one or two layers of 12.5 mm. jeep board

screw fixed to the under side of suspend from soffits clits by ceiling angle

at 1220 mm. M/F ceiling fixed at 457 mm. centers at right angle to the

under side of intermediate channels using connected clips the jointing

174 beetween sheets are to be covered with paper liner complete assembling Sq.mt.

to be provide and fixed as per design drawings. Product specification and

instruction from the consultant. Rate shall be inclusive of amking of

cutouts, for light fixtures AC grill, Hatches etc. rate shall be inclusive of all

major / minor civil and repair work required to be carried out in order to

execute the afroesaid item to the satisfaction of the engineer in charge as

Planting of adzed with selected adzed plnt like golden, duranta, red bhaji

175 or selected plant at 45 cm. apart and maintance up to six month (without Rmt.

clay fertilizer)

Planting of selected shurb tree like tikoma, nrium or other selected plant

including preparing pit of size 30 x 30 x 30 cm. and filling with selected

176 garden soil including manure, fertilizer and maintance up to six month No.

(without clay fertilizer)

Supplying and stacking of selected garden soil including leveling and

dressing with all lead and lift.

Preaparing the land by filling fertile / selected garden soil, including

178 levelling and fine dressing and mixing / bio tack fertilizer / fertilizer and Sq.mt.

termite as per required.

Preaparing the existing land / soil and remove of unserviceable soil,

179 stone, unwanted vegetation and disposing of the same as direced. Sq.mt.

White Stone Bela mesonry block in course in super structure with stone

180 of approved quality in Lime Mortar 1:6 (1-Cement : 6- course sand) Cum

including packing the joints etc. complete.

White Stone Bela mesonry work in partition walls upto 15 cm. thick

181 thickness in Cement Mortar 1:4 (1-Cement : 4- course sand). Cum

Providing and laying grnite 18 mm. thick in riser of steps, Dedo and pillars

laid on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry including rounding and moulding etc.

Providing and fixing brass screw down stop tap. (i) 15 mm. dia.

Sr.No. Description of Item Unit

Providing and fixing 600 mm. x 450 mm. bevelled edge mirrror of superior

glass mounted on 6 mm. thick A. C. sheet or plywood sheet and fixing to

wooden pluge with C. P. brass screws and washers.

Providing and fixing C. P. brass towel rail complete with C. P. brass

185 brackets fixed to wooden plugs with C.P. brass scews. (B) 600 mm. x 20 No.

Providing and fixing screw down bib taps of following size. (B) Brass

186 chromium plated down Bib Tap screws (i) 15 mm. dia. No.

Providing & fixing pillar tap, capstan head, screw down high pressure

187 with screws, shanks and back nuts. (i) 15 mm. dia. No.

Providing and fixing Gun metal check or non-return fullway wheel valve.

(A) 15 mm. dia. No.

(B) 25 mm. dia. No.

(E) 40 mm. dia. No.

Supplying of potable water in own tanker on road site or helipad sit as

189 (I) 3000 Liter Trip

(II) 4000 Liter Trip

(III) 5000 Liter Trip

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

190 compressed / vibrated mechanically and as per approved design Sq.Mt.

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

191 concret as per approved design and including excavation for fixing in Sq.Mt.

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

Providing and laying broken China Mosaic flooringvfor terrace using

mm. to 20 mm. broken piece of glazed tiles to be laid over cement mortar

1 : 3 to plain or slope and to be tempered to bring mortar crème out upto

192 sirface using white cement including rounding off junctions and extending Sq.Mt.

them up to 15 cm. along the wall, clearing with water and oxalic acid etc.

Removing and scraping of old deteriorated Plaster of any thickness from

wall / RCC member including stacking of serviceable material and disposal

of unserviceable from site of work with all lead.

Sr.No. Description of Item Unit

Reapirs to doors, windows shutters and partition by providing necessry

alluminium section channels, frames and necessry hardware fitting and

194 including replacing damaged panel by new matching panel etc. complete Sq.mt.

as directed including all cost of labour and materials.

Demolition including stacking of serviceable materilas and disposal of

195 unserviceable materials with all lead and lift. (i) RCC Work Cum

Dismentaling tiled or stone floors laid in mortar including stacking of

196 serviceable materilas and disposal of unserviceable materials with all lead Sq.mt.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

197 potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

(A) 15 mm. dia. Rmt.

(B) 20 mm. dia. Rmt.

(B) 25 mm. dia. Rmt.

(D) 32 mm. dia. Rmt.

(E) 40 mm. dia. Rmt.

(F) 50 mm. dia. Rmt.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

(A) 15 mm. dia. Rmt.

(B) 25 mm. dia. Rmt.

(C) 32 mm. dia. Rmt.

(D) 40 mm. dia. Rmt.

(E) 50 mm. dia. Rmt.

Sr.No. Description of Item Unit

Providing, laying and jointing in true line and level 160 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

199 every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

(A) 160 mm. dia. Rmt.

(B) 110 mm. dia. Rmt.

Providing, laying and jointing in true line and level U.P.V.C. SWR Type B-

Pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to IS : 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 200mm diameter x 210mm length x 196mm high at

every 2000mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pies and joints and jointed with adhesive solvent cement including cost of

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jali of

the following nominal diameter of self cleansing design with C.I. Scrwed

down or hinged grating including the cost of cutting and making good the

(A) 100 mm. dia. Rmt.

(B) 75 mm. dia. Rmt.

Repairs to steel EZ section windows including dismentaling damage parts

and providing new parts with welding including priming coat and two coat

of oil paint etc complete with all materials and labour etc.

Repairs to valve of all size including petches on spindal welding, terning

203 work and fitting in original position with all materials and labour etc. Nos.

Providing and fixing Gun metal check or non-return fullway wheel valve.

Providing and fixing Gun metal check or non-return fullway wheel valve.

Sr.No. Description of Item Unit

Providing and fixing cupboard framing and shutters of CRC Sheet of

mm including cutting welding fixing well with wall or Kotah stone with

one coat of primer and Two coat of oil painting etc. complete

Providing and fixing in position 300 mm high, 150 mm wide English letters

made from 1.0 mm thick stainless steel sheet as directed by Engineer-in-

charge with all necessary tools & plants etc. complete.

Providing and fixing in position 150 mm high, English letters made from

1.0 mm thick stainless steel sheet as directed by Engineer-in-charge with

all necessary tools & plants etc. complete. Market Rate

Providing and Fixing 5mm th.acralic Name Palte including Drilling, fixing

209 with studes with nacessary radium font etc. complete Sq.Inch

Providing and oil Painting to existing/ new wall Surface, and other surface

including removing of existing colour, surface remains free from dirt, dust

210 and other foreign metters, including primer coat with nacessary font Sq.mt.

(English/ Hindi/ Gujarati) with all material and Labour etc. complete

Engaging Male/Female Mazdoor on daily wagees basic on site and works

like shifting of Material,Swiping,cleaning offices and House Keeping Work

etc…. as per instruction of Engineer in Charge

Engaging Plumber/Fitter on daily wagees basic on site and works like all

212 type of Plumbing and Fitting Work etc…. as per instruction of Engineer in Day

Engaging Mistry on daily wagees basic on site and works like all type of

213 Carpentry Work etc…. as per instruction of Engineer in Charge Day

Engaging Welder on daily wagees basic on site and works like all type of

214 eracting and Fabrication Work etc…. as per instruction of Engineer in Day

Providing and fixing plain asbestos sheet lining with butt jointing and

215 wood screws ,Including frame work and cover fillets (ii) Class B-5 5mm Sq.mt.

thick (upto 10 ton)

Providing and laying for water proof torch APP/ABS modified bituminous

based members for water proffing of roofs and basement (like Dr.Fixit or

equaliant) with all kind of labour and materials

Supplying OPC 53 grade Fresh Cement on site with all lead.and lift as

directed incuding all taxes without star rate

Supplying of Good Quality River Fine Sand on site with all lead.and lift as

directed incuding all taxes

Supplying of Machine Crushed Stone Aggregate hard Quality 10 mm size

219 on site with all lead.and lift as directed incuding all taxes cumt

Sr.No. Description of Item Unit

Supplying of Machine Crushed Stone Aggregate hard Quality 20 mm size

220 on site with all lead.and lift as directed incuding all taxes cumt

Supplying of Machine Crushed Stone Aggregate hard Quality 40 mm size

221 on site with all lead.and lift as directed incuding all taxes cumt

Providing and fixing U.P.V.C Roofing sheets fixed with G. I. plain and

222 bitumen washer complete excluding the cost of purlins, rafters and Sq.mt.

trusses. (i) 2 mm thick.

Providing and fixing PVC foam Board shutter of 22 to 30 mm . thick

including fixtures and fastening including non teak wood/cement frame

223 size of 90. x 30 mm. fixing in Wall/ Kota stone by drilling and screw as Sq.mt.

Providing and fixing Stainless steel kitchen sink - without drain board

bowl depth 200 mm

I / we am/ are willing to carryout the rate at __ %(in figures) ‌_________the estimated rates mentioned above

1 Testing of materials Charge paid by Contractor

2 Samples to be sent by contractor to GERI.

Executive Engineer

Road & Building Division