Repair/ maintenance to misc wooden furniture of OTM and Md Accn at under GE Dehradun

Amount

Repair/ Recushioning of Sofa Set 5 Seats / 4 Seats.

(a) Removing the existing unserviceable covers from detachable foam cushion and S&F new cover made out of superior quality tapestry cloth of approved quality (locally available), not less than Rs. 550/-per meter) duly stitched as per size of seat & one side be stitched with zip chain of approved quality complete all as specified & shown on drgs & approved by GE

(b) S&F foam cushion 100mm thick and 40density, size 22”x21”x4” duly covered with new tapestry cloth cover made out of superior quality tapestry cloth of approved quality (locally available), not less than Rs. 550/-per meter) duly stitched as per size of seat & one side be stitched with zip chain of approved quality complete all as specified & shown on drgs & approved by GE

(c) Removing the existing unserviceable front legs from Sofa set 04 / 05 seater and S&F new front leg made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed

(d) Removing the existing unserviceable Rear legs from Sofa set 04 / 05 seater and S&F new Rear legs made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed

(e) Removing the existing unserviceable Batterns from Sofa set 04 / 05 seater and S&F new Battern made out of Teak Wood duly finished and complete to match the original as shown on Drg as directed

(f) Removing the existing unserviceable Long Rails from Sofa set 05 seater and S&F new Long Rail made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed

(g) Removing the existing unserviceable Hand Rest from Sofa set 05 seater and S&F new Hand Rest made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed

(h) Removing the existing unserviceable Short Rail from Sofa Single seater and S&F new Short Rail made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed

(j) M&L for French Polishing to Sofa Set 05 Seater

(k) M&L for French Polishing to Sofa Set 04 Seater

REPAIR TO TABLE BED SIDE

(a) Removing and S&F new top of table bed side made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed.

(b) Removing of old unsv sides of table bed side and S&F new sides made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed.

(c) Removing of unserviceable ply wood back and S&F new back made out of 6mm thick commercial plywood of table bed side of required size

(d) Removing of unserviceable shelf / base of table bed side made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed.

(e) M&L for French Polishing to table bed side

REPAIRS TO BED PLY TOP/BED NEWAR

(a) Removing of old unserviceable head board and S&F new head board made out of teak wood frame of size 900x600mm including leg and 04mm thick both side teak face ply ISI marked for both sides & complete teak wood beading shall be provided all over complete all as directed

(b) Removing of old unserviceable foot board and S/F new foot board made out of teak wood frame of size 900x450mm including 04mm thick both side teak face ply ISI marked and complete 04mm thick teak wood beading shall be provided all over complete all as directed

(c) Removing of old broken long rails and S&F new long rails of shisham wood of size 1800x90x35mm long as per drg duly finished and complete all as directed.

(d) Removing of old unserviceable worn out ply wood top and S&F new ply wood top of size 1800x900mm of 12mm thick commercial BWR , ISI mark complete as approved by GE & rest all as per drg.

(e) Removing of old broken short rail/center stiffner and S&F new short rails/center stiffner of shisham wood of size 900x90x35mm long as per drg duly finished and complete all as directed

(f) M&L for French Polishing to Bed with plywood Top/Bed Newar

REPAIR TO TABLE CENTRE:

(a) Removing of old unserviceable existing top from table and S&F new top made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed..

(b) Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg complete to match the existing surfaces of the item

(c) Removing the existing unserviceable long rail from Table centre and S&F new long rail made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed by Engr-in-charge

(d) Removing the existing unserviceable Short Rails from Table centre and S&F new short rails, made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed

(e) Removing the existing unserviceable Stiffners from Table centre and S&F new Stiffners made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed by Engr-in-charge

(f) M&L for French Polishing to Table Center

REPAIRS TO TABLE PEG:

(a) Removing of old unserviceable existing top from table and S&F new top made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed.

(b) Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg complete to match the existing surfaces of the item.

(c) Removing the existing unserviceable long rails from Table peg and S&F new long rails made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed by Engr-in-charge

(d) Removing the existing unserviceable Short Rails from Table peg and S&F new short rail made out of Teak Wood duly finished complete to match the original as shown on Drg as directed by Engr-in-charge

(e) Removing the existing unserviceable Stiffners from Table peg and S&F new Stiffners made out of Teak Wood duly finished complete to match the original as shown on Drg as directed by Engr-in-charge

(f) M&L for French Polishing to Table peg

REPAIRS TO TEAPOY WOODEN/FD:

(a) Removing of old unserviceable existing top from table and S&F new top made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed.

(b) Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg complete to match the existing surfaces of the item.

(c) Removing the existing unserviceable long rail from Teapoy wooden and S&F new long rail made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed

(d) Removing the existing unserviceable Short Rail from Teapoy wooden and S&F new short rail made out of Teak Wood duly finished complete to match the original as shown on Drg as directed

(e) Removing the existing unserviceable Stiffners from Teapoy wooden and S&F new Stiffners made out of Teak Wood duly finished & complete to match the original as shown on Drg & as directed

(f) M&L for French Polishing to Table peg

REPAIRS TO TABLE DRESSING LADIES

(a) Removing of old unserviceable mirror from table dressing ladies and S&F new mirror of size 1220 x 365 x 5 mm thick, duly fixed with frame as per drg.

(b) Removing of old unserviceable plastic laminated sheet from the top of table and providing new plastic laminated sheet 1.00mm thick duly fixed with synthetic adhesive as per drg

(c) Removing of old unserviceable glass shutters and aluminium channels and providing new sliding glass shutters duly fixed with new aluminium channels as per drg.

(d) Removing of old unservicable drawer and knobs and providing of new drawers of existing shape and size made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size with 4mm thick teak wood edging on open edges for sides and 6 mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg. complete all as specified and directed. All exposed faces of timber shall be treated with french polish all as directed.

(e) M&L for French Polishing to Table Dressing Ladies

REPAIRS TO TABLE DRESSING GENTS.

(a) Taking down unserviceable broken mirror and S&F new mirror 760x365x5mm thick, duly fixed with frame as per drg

(b) Removing of unserviceable laminated sheet from top of table and providing new plastic laminated sheet 1.00 mm thick of on top duly fixed with synthetic adhesive as per drg

(d) Removing of old unservicable drawer and knobs and providing of new drawers of existing shape and size made of 12mm prelaminated MDF board or 12mm Ply wood of shade bavarian beech exterior Grade ISI marked of existing size with 4mm thick teak wood edging on open edges for sides and 6 mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg. complete all as specified and directed. All exposed faces of timber shall be treated with french polish all as directed.

(e) M&L for French Polishing to Table Dressing Gents

REPAIRS TO HAT STAND WITH MIRROR SMALL/LARGE

(a) Removing of old unserviceable ply wood of hat stand and S&F new ply wood 3.5mm thick one side Teak Face all as directed by Engineer-in-Charge and as per drg. 4mm thick teak wood edging shall be provided ISI marked

(b) Removing of old unserviceable pegs of hat stand and S&F new metal pegs (CP) all as directed by Engineer-in-Charge and as per drg.

(c) Removing of old unserviceable broken mirror of hat stand and S&F 04mm thick new mirror all as directed by Engr-in-Charge and as per drg.

(d) Removing of old unserviceable ply wood from back of hat stand and S&F new ply wood 6 mm thick commercial ISI marked duly French polished all as per drg

(e) M&L for French polishing with high class finish, including preparation by proper sand papering. All as specified & directed by Engineer-in-Charge and all as per drg.

REPAIRS TO TABLE DINING 8 PERSONS:

(a) Removing of old unserviceable existing top from table and S&F new top made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed..

(b) Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg duly finished and completed to match the existing surfaces of the item.

(c) Removing the existing unserviceable long rail from Table Dining 08 Pers and S&F new long rail made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed

(d) Removing the existing unserviceable Short Rail from Table Dining 08Pers and S&F new short rail made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed

(e) Removing the existing unserviceable Stiffners fromTable Dining 08Pers and S&F new Stiffners made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed

(f) M&L for French Polishing to Table Dining 08 Pers

REPAIRS TO TABLE DINING 6 PERSONS:

(a) Removing of old unserviceable existing top from table and S&F new top made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed..

(b) Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item

(c) Removing the existing unserviceable long rail from Table Dining 06 Pers and S&F new long rail made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed

(d) Removing the existing unserviceable Short Rail from Table Dining 06 Pers and S&F new short rail made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed

(e) Removing the existing unserviceable Stiffners fromTable Dining 06 Pers and S&F new Stiffners made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed by Engr-in- charge/ GE

(f) M&L for French Polishing to Table Dining 06 Pers

REPAIRS TO TABLE 900X900X760MM:

(a) Removing of old unserviceable existing top from table and S&F new top made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed..

(b) Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg duly finished and completed to match the existing surfaces of the item

(c) Removing the existing unserviceable long rail/Short Rail from Table 900X900X760mm and S&F new long rail made out of Teak Wood duly finished and completed to match the original as shown on Drg as directed by Engr-in- charge/ GE

(e) Removing the existing unserviceable Stiffners from Table 900X900X760mm and S&F new Stiffners made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed by Engr-in- charge/ GE

(f) M&L for French Polishing to Table 900X900X760mm

Table 4'x3' (1200x900)

(a) Removing of old unserviceable existing top surface and S&F new top made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed..

(b) Removing of old unserviceable leg and S&F new leg made out of Teak Wood complete as shown on drg

(c) Removing of old unserviceable long rail and S&F new long rail made out of Teak Wood size & other details complete as shown on drawing.

(d) Removing of old unserviceable short rail and S&F new short rail made out of Teak Wood size & other details complete as shown on drawing.

(e) Removing the existing unserviceable Stiffners from Table 1200x900mm and S&F new Stiffners made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed by Engr-in- charge/ GE

(f) M&L for French Polishing to Table 1200x900mm

REPAIRS TO TABLE 900X600X760MM (WITH AND WITHOUT DRAWER)

(a) Removing of old unserviceable existing top from Table 900x600x760mm (With & without drawer) and S&F new top made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed..

(b) Removing of old unserviceable leg from Table 900x600x760mm (With & without drawer) and S&F new leg made out of Teak Wood as per drg, duly finished & completed to match the existing surfaces of the item

(c) Removing the existing unserviceable long rail from Table 900X600X760mm (With and without drawer) and S&F new long rail made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed by Engr-in- charge/ GE

(c) Removing the existing unserviceable Short Rail from Table 900X600X760mm (With and without drawer) and S&F new long rail made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed by Engr-in- charge/ GE

(e) Removing the existing unserviceable Stiffners from from Table 900X600X760mm (With and without drawer) and S&F new Stiffners made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed by Engr-in- charge/ GE

(f) Removing of old unservicable drawer and knobs and providing of new drawers of existing shape and size made of 12mm prelaminated MDF board or 12mm Ply wood of shade bavarian beech exterior Grade ISI marked of existing size with 4mm thick teak wood edging on open edges for sides and 6 mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg. complete all as specified and directed. All exposed faces of timber shall be treated with french polish all as directed.

(g) M&L for French Polishing to Table 900X900X760mm

Supply and Fixing 15mm Dia PVC Bush on the legs of Table with 10mm long S/S Screw (various types and Drgs) small sizes

Supply and Fixing 20mm Dia PVC Bush on the legs of Table with 15mm long S/S Screw (various types and Drgs) Large sizes

M R Taders

Avtarsinghchaddhaandcompany

M/SDoon furnishers