Design Supply and Installation of IRC Compliant Gantry Mounted Place Identification Multi direction, Kumbh branding digital printed Welcome and Thankyou Sign Boards and Replacement, Repair of Existing Damaged Sign Board on different road.

Providing and erecting a 10 to 12 m span Gantry-mounted sign board with a height of 7.89 m, consisting of two vertical poles and a 12 m horizontal MS tube. The sign face both side shall be executed with promotional colourful branding and printing work on corrosion-resistant Type XI DG Retro-reflective sheeting. This shall be fixed over an Aluminium Composite Material (ACM) sheet with an overall thickness of 4 mm (including 0.25 mm thick aluminium coil) clamp with flat 50X5 mm as per dwg ,Vertical faces of all side concrete piller paint with Kataline (or equivalent) Grade-1 water-based acrylic retro-reflective paint for night visibility.The work includes a designed support system of Mild Steel tube as per structural design requirements and IRC:67, utilizing MS Tube of 300 mm NB (323.9 mm OD) with 6.3 mm thickness and 25 mm thick base plates. Clearances must comply with Clauses 802.2 and 802.3, and installation must be performed as per Clause 802.7. The scope covers all excavation, PCC, RCC M-25, TMT reinforcement, and painting. The quoted rate is fully inclusive of all materials, labour, printing costs, T&P, and the deployment of heavy machinery (Crane, Hydra) required for proper completion as per the attached drawing. (Measurement for payment purposes will be based on the Board Area only).

Providing and erecting a 14 to 15m span Gantry-mounted sign board with a height of 7.89 m, consisting of two vertical poles and a 12 m horizontal MS tube. The sign face both side shall be executed with promotional colourful branding and printing work on corrosion-resistant Type XI DG Retro-reflective sheeting. This shall be fixed over an Aluminium Composite Material (ACM) sheet with an overall thickness of 4 mm (including 0.25 mm thick aluminium coil) clamp with flat 50X5 mm as per dwg ,Vertical faces of all side concrete piller paint with Kataline (or equivalent) Grade-1 water-based acrylic retro-reflective paint for night visibility.The work includes a designed support system of Mild Steel tube as per structural design requirements and IRC:67, utilizing MS Tube of 300 mm NB (323.9 mm OD) with 6.3 mm thickness and 25 mm thick base plates. Clearances must comply with Clauses 802.2 and 802.3, and installation must be performed as per Clause 802.7. The scope covers all excavation, PCC, RCC M-25, TMT reinforcement, and painting. The quoted rate is fully inclusive of all materials, labour, printing costs, T&P, and the deployment of heavy machinery (Crane, Hydra) required for proper completion as per the attached drawing. (Measurement for payment purposes will be based on the Board Area only).

Dismantling of existing broken down structure and poles of existing cautionary / mandatory / informatory / overhead sign board/Nagar Nigam Hording using complete Tools and Machinery and dismantling of sign plate of existing unserviceable material using proper machines, tools etc, in such a manner that new sign board can be installed.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Providing and erecting overhead signs with a corrosion resistant Type XI retro-reflective sheeting fixed over Aluminium composite material sheet with overall thickness of 4 mm, with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7

Supply of Retro Reflective Sign Board made up of 4 mm thick Aluminum Composite Panel fully Covered with Prismatic Diamond Grade Sheeting (Type XI) Matter, Symbol, Letter, Logo etc. in both side as per IRC:67 shall be cut by CNC machine of same type of Sheeting or ECF or Latex Printed as per Engineer in Charge. Board shall be supported by 40 mm dia. SS pipe (Grade 304) frame riveted on SS flat 20x5 mm welded inner side of the frame with two posts of 65mm dia SS Pipe with holdfast and the posts of sign board shall be embedded in 450x450x600 mm foundation with concrete (M 25 grade cement) complete in all respect. ( sign board both side )

Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of Type XI retro- reflective sheeting, vide clause 801.3, fixed over Aluminium composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB, 3.2 mm thickness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

Providing, fabricating, supplying and fixing in position temporary signage boards of approved design and layout during Kumbh Mela, comprising MS iron frame made of angle iron sections of size 25×25×3 mm (minimum), supported on a single vertical post made of MS angle section of size 40×40×5 mm, having overall height of 1.80 metre above ground level, properly embedded in ground to a depth of 0.45 m to 0.60 m and fixed in cement concrete (1:3:6 or M-10 nominal mix) of suitable size to ensure adequate stability, including excavation and disposal of surplus earth, complete as per site conditions. The signage board shall be covered with flexi film/vinyl of minimum 300–440 GSM, digitally printed with approved matter including logos, directions and safety instructions using eco-solvent printing. The flex shall be properly stretched and fixed over the frame using suitable clamps/fasteners ensuring smooth and wrinkle-free finish. The item includes painting of MS frame and post with one coat of approved primer and two coats of synthetic enamel paint of approved shade, complete including provision of QR code in all respects. The width of signage board shall vary from 0.90 m to 2.00 m or as directed by the Engineer-in-Charge.

Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Reflective Kerb Painting Kerb stone / vertical surface painting with Kataline make Grade 1 (as per IS 164 ) water based acrylic paint,preferably mechnical application for one coat priming coat and 1 uniform Retro reflective finish coat in required colour. Yellow Retroreflecive coat shall be Bright Yellow during night with minimum Rl(dry) > 375 mcd / m2 / lux and Rl (wet) > 200 mcd / m2 /lux andWhite Retroreflective Coat shall be Bright White during night with minium Rl(dry) > 450 mcd / m2 / lux and Rl(wet) > 250 mcd / m2 / lux .Cleaning of the surface thoroughly by removing flakes,dust deposits, vegetation growth,pasted paper etc., using coir / coil brush, so as to enable the application of respective primer etc. ketaline or Equivalent