Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.0 L
EMD Value
₹2,000
Closing Date
4 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Dy. Executive Engineer, R&B Sub Division, Patan
SR to Taluka Court Chanasma Ta- Chanasma Dist. Patan (Providing Facilities For VWDC) (2nd Attempts)
367423
19 of 2025-26
Open
Civil Works - Buildings
Works
Patan
6 documents required · 6 mandatory
₹600
Patan
₹2,000
19 Nov 2026
19 Nov 2026
19 Nov 2026
4 Dec 2026
19 Nov 2026
90 days
Name of Work :-
SR to Taluka Court Chanasma Ta- Chansma Dist. Patan(Providing Facilities For VWDC)
Bill of Quantity
Quantities Tendered Rates
It estimated Rs. In Total amount
It estimated Rs. In Total amount
Figures. according to
Item of Work Unit estimated
or less quantities
1 17.28 ALUMINIUM PARTITION
Providing and fixing aluminum partitions partly glaze and partly fixed with
extruded built up standard tubular sections/ appropriate section size :-
MM x38.10 MM wall thickness 1.95MM (of jindal section code - 20073 and
other sections of approved make conforming to IS: 733 and IS: 1285, fixing
with dash fasteners of required dia and size, including necessary filling up
the gaps at junctions, i.e. at top, bottom and sides with required EPDM
rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including cleat
angle, Aluminum snap beading for glazing / paneling and dash fasteners to
be paid for separately) : 1.95 mm thick aluminum section with followings:
• Color Anodised aluminum (anodised transparent or dyed to required shade
according to IS: 1868, Minimum anodic coating of grade AC 15)
• Providing and fixing 12 mm thick prelaminated particle board, extrior grade.
flat pressed three layer or graded wood particle board conforming to IS:
12823 Grade l Type ll, in panelling fixed in aluminum doors and partition
frames with C.P. brass / stainless steel hinges , handel, lock screws etc.
Pre-laminated particle board with decorative lamination on both sides Or •
With float glass 5.5 mm thickness & PLB panels of 12 mm thickness for
above. The cost inclusive of the partition and doors also as per the site
situation. Strictly made with jindal make section only. The quoting price
should be inclusive of packing, forwarding, loading, unloading, installaion. As
per choice of users department and Concern officers in charge as directed Rupees Three Thousand
by the Architect/Engineer. Six Hundred Eight And
Paise Seventy Three
3608.73 Only sq.mt
2 1.89 Providing and fixing anodised aluminium section door having top and bottom
rail of 110 mm x 45 mm and middle & verticle rail members of 80 mm x
mm. Door shutter shall be with partly 5mm thick tranporant glasss & partly
12mm thick Bhuttan board with all necessary fixtures and fasteners incl. Rupees Five Thousand
glazing clip rubber gasket etc with all labour charges as per directed by Sixty Three And Paise
engineer in charge. 5063.86 Eighty Six Only sq.mt
3 6.25 KIDS PLAY MAT
INTERLOCKING FLOOR MAT:
EVA Foam Interlocking Floor Mat, each 600 mm x 600 cm, 20-25 mm thick,
Interlocking Puzzle Foam, Multicolour Tiles should create a cushioned
(Shock absorbing can take repetitive shocks) and comfortable surface on
hard floors, Should create a secure puzzle connection for a seam less
appearance, Detachable edge pieces enable versatile configurations as Rupees Four Hundred
corner, border or center tiles, Expandable design, Safe for children, non- Eighty Three And Paise
toxic. 483.79 Seventy Nine Only sq.mt
4 1.00 THREE SEATER SOFA
Providing & Supplying sofa The structure will be made in solid wood and
plywood where ever required . the structure shall have copper spring base
with elastic belts with foam/jute covering on top. The seat/Back where ever
required . shall have 32 density foam of 125MM thickness with LEATHER
Tapestry designed to give comfort with quality etc. The quoting price should
be inclusive of packing, forwarding, loading, unloading, installaion. Supplied
strictly as per our technical specifications and make. Approved Make :-
GodrejBibbin / Nilkamal Novelty /Durian Fiona . As per choice of users
department and Concern officers in charge as directed by the Rupees Thirty Thousand
Architect/Engineer. Eight Hundred Thirty And
(Strictly Supply Make :- Godrej RIO / Nilkamal Novelty /Durian Fiona ) 30830.25 Paise Twenty Five Only Nos.
5 1.00 Two seated sofas
Providing and supplying sofa(2seater) made with using 19mm Thk. Plywood
(M1) structure frame with S.S. legs required necessary support fixed with
necessary fixtures and fastening (Hardware)(M14). It shall be covered with
32 Density PU foam(M22) with required Thickness as per design in seat &
back and handle portion this should be again covered with 14 mm thick PU
foam (M22) with Madarpat cover on it & upholstered fabric(M26) or leather of Rupees Twenty Three
suggested & approved by architect finished with seat, back & all visible side Thousand Nine Hundred
Complete and as per instruction of architect & engineer in charge. Fifty Nine And Paise
23959.22 Twenty Two Only Nos.
6 1.00 CENTER TABLE
Providing and supplying Table of overall 1000X500X400 size structure shall
be made of 18mm thick ply wood of IS 710 of approved brand with 4mm
thick veneer(M23). All edges shall be covered with required Teak wood
beading Patti (M4) finished with approved melamine polishing (M29) work.
Table Top covered with 8 mm Thk. toughened Glass (M27) with Polished Rupees Five Thousand
Edges. Fixed with necessary fixtures and fastening (Hardware) (M14) One Hundred Six And
Complete. 5106.56 Paise Fifty Six Only Nos.
C:\Users\User10\AppData\Local\Temp\Rar$DIa3456.20105\DTP VWDC Chanasma Dt 17-10-2026
Quantities Tendered Rates
It estimated Rs. In Total amount
It estimated Rs. In Total amount
Figures. according to
Item of Work Unit estimated
or less quantities
7 4.00 VISITOR OR GUEST CHAIR
Providing and Supplying Visitor or Guest Chair the Seat & Back are Made of
12mm thick hot-Pressed plywood upholstered with Changeable Fabric
upholstery Covers (as per Requirement) and molded PU Foam,together with
molded seat & Back Covers.The back foam should be designed with
contoured lumber support for extra Comfort.The Size of Chair 45cm X
38cm(Back Side) and 45cm X 43cm(Seat Size).The PU Foam Should be
Molded with density =45+ 2 kg/m3.The Armrest with Leg made with Powder Rupees Seven Thousand
Coated MS Structrure as per architect selection.The Seat and Back Fixed Three Hundred Fifty
with MS Structure with Required Necessary Hardware. Three And Paise Seventy
7353.70 Only Nos.
8 1512.00 S.S SIGNAGES
Providing & Fixing S. S. Plate Signages having size of 14 In. X 5 In. X
mm thick name plates with matt finish buffing process of 304 grade
mentioning officers names/designations etc. The quoting price should be
inclusive of packing, forwarding, loading, unloading, installaion. As per
choice of users department and Concern officers in charge as directed by Rupees Seventeen And
the Architect/Engineer. 17.17 Paise Seventeen Only Sq.in
9 8.64 Providing and fixing one way mirror film on glass as per direction by Rupees Five Hundred
Engineer In Charge. 505.00 Five Only Sq.mt
10 1.00 providing and supplying SS folding godiyu with free cotton cloth as per Rupees One Thousand
direction and instruction of engineer incharge. Six Hundred Fifty One
(Rate As per with out GST) And Paise Forty Three
1651.43 Only Nos
I / We am / are willing to carry out the work at……………….% Above / below percent (should be written in figure
and words) of the estimated rates mentioned above Amount of my / our tender works out as under.
Estimated Amount Estimated Amount
Put to Tender Rs. …………………. Put to Tender Rs. …………………
Deduct ……% Below Rs. …………………. Add…………% Above Rs. …………………
Net Rs. …………………. Total Rs. …………………
Signature of Contractor Dy. Executive Engineer Executive Engineer
Dy. Executive Engineer
R&B Sub Division
C:\Users\User10\AppData\Local\Temp\Rar$DIa3456.20105\DTP VWDC Chanasma Dt 17-10-2026
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BuildingSpecificationBooklet1.pdf
Tender GR Buildings.pdf
BOQ.pdf
SBD-SR to TCB (VWDC) Chanasma.pdf
Index Specification.pdf
Specification.pdf
Notes.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .