PROVN OF DLP TRUNKING, SPL REPAIR TO CSD CANTEEN, CSD BUILDING AND OTHER CONNECTED WORKS UNDER PCDA (A) DEHRADUN

Amount

Supply and fixing DLP-U-PVC adoptable truning system as per MDS Lexic size 50 x 80 mm, 1- compartment comprising of accessories like flexible cover, end caps, cable tie base,angles, junctions and bus bars etc and any other required accessories as per site requirement and complete all as specified and directed.

Supply and fixing DLP-U-PVC adoptable truning system as per MDS Lexic size 50 x 105 mm, 1- compartment comprising of accessories like flexible cover, end caps, cable tie base, anggles, junctions and bus barsetc and any other required accessories as per site requirement and complete all as specified and directed.

Supply and fixing DLP-U-PVC adoptable truning system as per MDS Lexic size 50 x 130 mm, 2- compartment comprising of accessories like flexible cover, end caps, cable tie base, angles, junctions and bus bars etc and any other required accessories as per site requirement complete all as specified and directed.

Supply and fixing DLP-U-PVC adoptable truning system as per MDS Lexic size 32X12.5 mm, 1- compartment comprising of accessories like flexible cover, end caps, cable tie base,angles, junctions etc and any other required accessories as per site requirement complete all as specified and directed.

Supply and fixing DLP-U-PVC adoptable truning system as per MDS Lexic size 32X16 mm, 1- compartment comprising of accessories like flexible cover, end caps, cable tie base,angles, junctions etc and any other required accessories as per site requirement complete all as specified and directed.

S&F sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FR) 1100Volts grade drawn in & including rigid PVC casing caping/conduit 20mm dia or more medium grade concealed in wall along with 2.5 Sq mm PVC insulated unsheathed copper conductor cable (FR) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed.

S&F 2 Pair cable for connection from Meter to freedom unit; (Data Cable-RJ 11 ) for Type I, complete all as specified and directed.

Supply and fixing and passing through conduit CATC Co-axial cable (Electolytic Grade solid annealed copper conductor JF ,AI Foiled and AL wire Braided) RG 6 (Foam) Make:Finolex/Havells/Polycab.Note:PVC Conduit pipe and accessories shall be measured seperatel under Sch Ser item No.12

Supply Laying and Cable XLPE PVC insulated PVC sheathed, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm , 2 core complete all as specified and directed.

Supply and fixing Cable XLPE PVC insulated PVC sheathed, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm , 4 core complete all as specified and directed.

Supply and fixing Cable XLPE PVC insulated PVC sheathed, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm , 3.5 core complete all as specified and directed.

Supply and fixing PVC Conduit Pipe 20mm on wall with clamps complete all as specified and directed.

Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified

Taking down carefully ceiling fan of any sweep and refixing the same after proper cleaning all as specified and directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface, including all necessary modular accessarries like metallic flush box, white cover plate with frame etc and 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable as earth wire connected with main common earth dolly including complete all as specified and directed for the following :- (a) One light/fan/bell point controlled by one, one way Modular switch complete all as specified and directed

a) One 3 pin/ 5 pin 5 AMP socket out let on same board controlled by one, one way Modular switch complete all as specified and directed.

b) One 3 pin/ 5 pin 5 AMP socket out let on independent board controlled by one, one way Modular switch complete all as specified and directed.

All as per item No 16 above but with 2.5 Sqmm PVC insulated cable and same size of earth wire for 15 Amps power point.

All as per item No 16 above but with 4 Sqmm PVC insulated cable and same size of earth wire for 15 Amps power point.

S&F Modular switch single pole, 5/6 AMP 240 volts AC, complete all as specified and directed.

S&F Modular switch single pole, 15/16 AMP 240 volts AC, complete all as specified and directed.

Supply and fix socket out-let modular with safety shutter 5/6 Amp, 5 pin, complete all as specified and directed.

Supply and fix socket out-let modular with safety shutter 15/16 Amp, 5 pin, complete all as specified and directed.

Supply and fix modular Step type fan regulator for 230 volt AC, complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x25mm dia having three terminals all as specified

S& F in replacement wall mounted LED batten 18 watt with integrated electronic driver, aluminium housing and polycarbonate diffuser complete all as specified and directed. Make: Havells Cat No LHEDAAP7PW1WO18/ Crompton Cat No LCTL-18-CDL/ Equivalent in Philips

S & F in replacement LED recessed 2X2, glare free with integrated electronic driver. uniform illumination ceiling light 36 Watt, color Temp 5700K including driver & twin core copper wire for making connection from light to ceiling rose complete all as specified and directed. Make: Havells cat no LCTRN-36-FO-CDL/Equivalent in Havells/C&S

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single Pole MCB capacity 20 Amps.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed.

Supply and fixing MCB 5 to 30 Amp 'C' series 10 KA repturing capacity complete all as specified.

Supply and fixing MCB isolator SPN 40 Amp 240 V AC 10 KA repturing capacity all as specified.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut to facilitate demolition) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

Taking down old drapery rods/ pelmets and S&F roller window blinds made up of thermal fabric with roll up blinds mechanism, plain or printed type, of design and shade as approved by the Engineer-In-Charge complete with all connected fittings and fixtures.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M & L rendering 15mm thick on fair faces or other than fair faces of brickwork in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling and providing and fixing chicken wire mesh at plces as directed by the Engineer-In-Charge complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I) complete all as specifed and directed.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Chajjas, shelves etc including necrssary formwork complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (12.5 mm graded aggregate) 25 mm thick as in floors finished fair and even to receive other floor finish,complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles of size 300x450x7 mm thick on walls set and jointed in neat cement slurry and pointed in white or colosured cement to match the shade of tile including 10mm thick rendering in CM 1:4 finish surface rough to recieve tile and Dismantling floor, hearth or wall tiling including bedding (but not backing) rubbish off the premises complete all as specified and directed. and complete all as specified and directed.

M&L vitrified coloured tiles 10 mm thick dark shade/ double charged/ ultra charged (square/ rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed.

M&L for complete removal of existing treatment of any description of on ceiling, preparing the surfaces with 3mm thick wall care putty on plastered surfaces, preparatory to distemper surface of wall and applying two coat of oil bond distemper over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of any description of on walls, preparing the surfaces with 3mm thick wall care putty on plastered surfaces, preparatory to distemper surface of wall and applying two coat of oil bond distemper over a coat of primer complete all as specified and directed.

M&L preparation of new surfaces with 2mm thick wall putty and applying two coat of oil bond distemper over a coat of primer on walls complete all as specified and directed

M&L preparation of new surfaces with 2mm thick wall putty and applying two coat of oil bond distemper over a coat of primer on ceiling complete all as specified and directed

S & F in repair 19 mm thick BWP plywood type BB no of ply as per IS specified as in cupboard or wardrobe fixed with powder coated screws, finished edges with PVC lipping as suitable colour of decorative lamination complete with all self closing type hinges, handles, knobs and magnetic catcher etc. complete all as specified and directed. Make - Greenply, Kitply, Arcdiaply

S&F 1.5mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive in curve or flat surface as per manufacturer instructions complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames of any size n. exc 1.5 sqm each

All as per item 53 above but exc 1.5 and n.exc 4 Sqm –each, complete all as specifed and directed.

S&F Aluminium powder coated three track sliding windows (with three sliding shutters, (One with and incl stainless steel wire mess and two with and incl 5 mm thick sheet glass panes) aluminium sections weighing not less than 1.1 kg per meter for bottom track and top track and side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, side shutters o.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading channel gasket, nylon rollers Maruthi lock with handles etc complete all as specified and directed. Windows shall be provided with guard bars using 25 mm flat iron and 10 mm square bars of design including painting of guard bars, Complete all as specified and as directed.

S&F Aluminium powder coated fixed glazing with aluminium frame of weight not less than 1.2 kg/m with and incl 8 mm thick glass (plain/ tinted) of size as directed by the Engineer-In-Charge including suitable nylon beading channel gasket, etc complete all as specified and directed. Make- Antelio glass of Saint Gobain

S&F Aluminium powder coated door with frame of suitable size with aluminium section of weight not less than 1.2 kg/m with and incl 12 mm thick BWP ply coated with mica as directed by the Engineer-In-Charge including all necessary beadings, handles (02 Nos), tower bolts (02 Nos), floor spring (01 No.), mortice lock (01 No.) etc complete all as specified and directed.

M&L 16 to 18 mm thick granite stone slab in flooring, steps, jambs, pillars, jamb pillars, window-cills, cooking plateform and the like over and including 20 mm thick screed bed in cement mortar 1:6 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, incl moulding the edges of stone complete all as specified and directed.

M&L 35 mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides, incl mortice lock (01 No.), Hinges 100 mm (04 Nos), Floor and back stoppers, 200 mm long handles (02 Nos), 200 mm long tower bolts (02 Nos) complete all as specified. Make century or equivalent. Note: All the fittings of builder's hardware shall be brass and shall be as approved by the GE.

Dismantling of CGI/PGI Sheet fixed with screws as in roof covering complete all as specified

Dismantling of unframed timber scantlings 40 Sqcm and over in section in any position.

S & F mild steel work as in trusses, rafters, purlins etc, and the like made out of MS pipe, flat, angle or hollow sections conforming to Fe-410-W (Gde-E-250) quality-A incl all necessary cleats, gusset plates etc complete all as specified and as directed.

M&L Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet .50 mm thick of any colour, AZ value 150, having tensile strength of 550 Mpa as in roof covering/Clading to wall, fixed with self tapping screws as specified (Make : Crill/Tata Blue scope/JSW)

M&L Pre-painted galvalume aluminium zink coating GI based Plain steel sheet .50 mm lthick of any colour, AZ value 150, having tensile strength of 550 Mpa as in ridge, gutters and eaves board, fixed with self tapping screws as specified (Make : Crill/Tata Blue scope/JSW)

M & L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls with the help of clamps made out of 50x5 mm flat iron and nails/ nut bolts complete all as specified and directed. Note : The work shall be carried out at a height of upto 6 storeys including all necessary arrangements for scaffolding/ security measures.

S&F PVC (SWR) pipes 40 mm bore single socketed in any length with rubber ring joints fixed to walls with the help of clamps made out of 50x5 mm flat iron and nails/ nut bolts complete all as specified and directed incl cutting holes into or through brick or concrete walls if required at site. Note : The work shall be carried out at a height of upto 6 storeys including all necessary arrangements for scaffolding/ security measures.

S&F PVC (SWR) bends any radius 75mm dia, fixed to PVC pipes on walls. Note : The work shall be carried out at a height of upto 6 storeys including all necessary arrangements for scaffolding/ security measures.

S&F PVC (SWR) bends any radius 75mm dia with oval access door, fixed to PVC pipes on walls. Note : The work shall be carried out at a height of upto 6 storeys including all necessary arrangements for scaffolding/ security measures.

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with oval access door fixed to PVC pipes on walls. Note : The work shall be carried out at a height of upto 6 storeys including all necessary arrangements for scaffolding/ security measures.

S&F PVC (SWR) reducers 75 mm x 40 mm, fixed to PVC pipes on walls. Note : The work shall be carried out at a height of upto 6 storeys including all necessary arrangements for scaffolding/ security measures.

S&F PVC (SWR) bends any radius 40 mm dia, fixed to PVC pipes on walls. Note : The work shall be carried out at a height of upto 6 storeys including all necessary arrangements for scaffolding/ security measures.

M & L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregaate in plinth courses, string courses, lacing courses, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed by the Engineer-In-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M & L for brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for providing cement concrete type C2, 1:3:6 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Add or deduct for each 25 mm girth or part thereof over or under 30cm girth in item 79 above.

M & L for providing cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, copings, apex stones, anchorage blocks and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M & L for providing precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in window or door cills, lintels, copings etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removing excavated material/ spoil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M & L for Moorum/ red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified.

M & L for providing 75 mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 15mm thick screed in CM(1:4)

M & L for RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in slabs supported on walls complete all as specified and directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exc 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified.

M & L for formwork to edges of concrete flats, sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide for rough finished surfaces of concrete complete all as specified.

M & L for precast RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in cover slabs (for manholes etc.) set in cement mortar 1:6 complete all as specified and directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as per Item No. 92 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified.

S&F,15mm bore tubes medium grade galvanized with all fittings and fixed complete to wall and ceiling or laid in floor.

S & F 15 mm bore stop valves, fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms)

Supply only 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F 15 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S & F stainless steel jet cleaner for 'E' type WC with flexible pipe, complete all as specified and directed.

S & F toilet paper holder of vitreous china, white, fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed.

S & F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S & F, 500 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F vitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, but including plastic water coset seat, black cosed pattern with flat bottom, and cover and mild steel chromimum plated hinging device.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) but incl fixing arrangement, urinal spreader and waste fitting etc complete all as specified and directed.

Supply only 10 litresPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S & F Vitreous China wash basin, white, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, including fixing taps, waste fittings and union, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.

Supply only 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed.

S & F 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified.

S & F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S.Square tube, supplying and fixing in opening as per specification and drawing.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S & F 125 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.

S & F 125 mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified.

S & F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 15mm thick screed in CM 1:6 complete all as specified and directed.

M & L, glazed ceramic coloured tiles 300X200X 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M & L rendering 5mm thick on fair faces of concrete surfaces in ceiling in CM 1:4, and surface is to be finished even and fair complete all as specified and directed.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6, and surface is to be finished even and fair complete all as specified and directed.

M & L applying three coat of white wash on new plastered or un-plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M & L applying three coat of white wash on new plastered or un-plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L for preparing new surfaces of walls and applying two coats of cement base paint over a coat of cement wash primer complete all as specified and directed.

M & L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide complete all as specified and directed.

Cutting to existing manholes for connecting new drains, making good pipe and rendering, cutting out existing benching for and forming branch channel (half round or 3/4 section ) in cement concrete 1:2:4 type B-1( using 20 mm graded stone aggregates) smooth finished and reforming benching as required for 150 mm dia pipe complete all as specified and directed.

M & L for concrete bed to drain pipe, 150 mm bore, including packing under and in haunching against the sides of pipe after they are laid and tested, using PCC 1 :3:6 type C-2 (using 40 mm graded stone aggregates) complete all as specified and directed.

M & L for 150 mm bore, grade 'A' SGSW drain pipe, laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed.

S&F Shelf of PTMT fixed with & including CP brass screws & wooden / platic cleats (min. weight 300gms) complete all as specified and directed.

S&F Towel Ring of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 90 gms) complete all as specified and directed.

Construction of new Soakage wells of size 1.2 M dia X 3.0 M effective depth, excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specifed and directed.

S&F switch piano, flush type single pole one way 05 Amp.

Supply and fixing switch piano flush type single pole one way 15 Amp.

S&F socket outlet 2 in 1, 3 pin, 5 Amp

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type.

S&F sub main wiring two single core 6 sq mm PVC insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) 20 mm dia medium grade alongwith 4 Sq mm PVC insulated unheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Supply and fix wall mounted cabin fan 400 mm sweep 230 volts single phase MS body with BEE star rated having suitable arrangements for fixing on wall complete all as specified and directed.Make Havells model D' zire and or equivalent Cromption/ Uaha

S & F PVC fresh air exhaust fan 240 volts Ac 50 Hz 250 mm sweep including louvers and cutting and makeing hole as required size and shape complete all as directed.Make: Havells model DX-White and or equivalent Cromption /Usha

S&F Tubes, galvanised, 20mm bore in medium grade with all fitting and fixed complete to walls and ceilings or laid in floors and all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

M/S Manmohan Singh Anand

KAPOOR ELECTRICALS

M/s Pradeep Kumar

P K ASSOCIATES