ESTIMATE FOR REPAIRING GATES AND GEARING SYSTEM, HOISTING STRUCTURE, PAINTING AND CIVIL WORKS OF ESCAPE OFF-TAKING AT RD 47470/L OF MANAWAN MINOR

Amount

Providing of hollow bulb seal 100 x 44 mm and fixing in position including preparation of surface complete in all respects.

Supply of Wedge type bottom rubber seal 80 x 12 mm per sample / drawing/ direction of engineer incharge complete in all respect ( As per IS code)

Removing damaged old rubber seals bulb or flat including clamp plate of all sizes and types

Supply of bolt for bottom and side seals and others ( with nuts and washers) of all sizes and length required complete in all respects.

Supply of MS flat 2" wide 8 mm thick

Supply mild steel ISA 50 X 50 X 6 mm @ 4.50 Kg per metre for railing.

Filled welding with high strength steel rods complete in all respect and to entire satisfaction of engineer incharge

Removing damaged structure steel and stacking clear from working space by gas cutting complete in all respect and to entire satisfaction of engineer incharge.

Cutting and straightening charges complete in all respects and to entire satisfaction of engineer incharge.

Supply of grease castrol Brand

Supply of mobile oil Castrol brand

Painting two coats with anti corrosive Bitumastic paint to give and even shade with special quality paint

Painting two coats with synthetic enamel paints on mettalic surface to give an even shade.

Scrapping, brushing of whole structure to remove rust, dirt and dust etc.

Applying priming coat with mettalic primer on new steel or iron work i.e, preparing of surface (CSR item No. 16.31 a)

Commissioning and testing of gates at sites complete in all respects and to entire satisfaction of engineer incharge

Removing , assembeling and fixing in position of gun metal bush complete in all respect and to entire satisfaction of engineer incharge

Crane 35 Tonnes charges for lifting purpose for dismantling loading/unloading and fitting of gates at site ( as per CSR item no. 2.13)

Advance direction sign board 1200x900mm rectangular as per IRC 67-2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2mm thick aluminium sheet with 25x25x3 mm angle iron frame supported of two mild steel angle iron post 65x6 mm firmly fixed to ground in foundation concrete 1:2:4 of size 0.60x0.60x0.75 m for vertical post complete as per technical clause 801 of Morth specifications

7 Watt LED 40 watt solar panel battery 12 volt/40 ah with T-el Battery

De linking gates and host mechanism complete in all respects and to entire satisfaction of engineer incharge

Tendering process and advertisement charges

SANNAN ENTERPRISES

ANJU INDUSTRIES