Construction of HT, LT line, 11/0.4 KV sub station and L.T. Extension work under Gadarpur/Dineshpur Section, giving new connection in HT/LT Scheme of UERC regulation

Amount

Annexure-A (LABOUR CHARGES)

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrod with the help of G.I. wire as per construction manual.

Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel ,bracing and special type bracket etc. as per RESPO schedule and local approced drawing.

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bott om including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in LT line.

Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV Line

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand) block including cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Erection of PCC single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual.

Erection of SP-33 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual.

Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual.

Erection of PCC double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual.

Erection of SP-33 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings ,& clamps as per RESPO manual.

Erection of Sp-55 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings ,& clamps as per RESPO manual.

Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement,stone and sand etc.

Dismantling of Transformers from double pole /plinth including opening of all connections, circuts & earthing strip etc. (25 KVA)

Dismantling of Transformers from double pole /plinth including opening of all connections, circuts & earthing strip etc. (63 KVA)

Installation of 33/11 KV Metering cubical in the Metering room with grouting and making all connection.

Loading, unloading & carriage of LT PRMC from Store to pit site & Installation on the double pole with the help of Nut Bolt & Clamp and making to pass LT cable from T/F to PRMC.

Laying and erection of L.T. PVC Cable including crimping of lugs of size 1x70,120, 150 Sq.mm. (Including all cost of material).

Digging of trench of size 0.60x0.15 x 1.5 mtr. and laying of underground 11 KV XLPE cable with making of brick housing and filling of sand including filling of earth with ramming. & repairing of road including cost of cement sand and stone blast

Installation / mounting of new 100 KVA Tranformer on pole structure and fixing of channel / angle etc. and making all connections of Ht and LT side and its complete commissioning.

Installation / mounting of new 63 KVA Tranformer on pole structure and fixing of channel / angle etc. and making all connections of Ht and LT side and its complete commissioning.

Installation / mounting of new 25 KVA Tranformer on pole structure and fixing of channel / angle etc. and making all connections of Ht and LT side and its complete commissioning.

Mounting & Fixing of Fuse sets on double pole structures including making of connections complete work.

Fixing of triangular type bracket on 11 KV line

Laying, Spreading, Stringing and sagging of 11 KV / 33 KV line in 3 phase (3 Phase 3 wire) of ACSR Weasel as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and profile and sagging chart.

Laying, Spreading, Stringing and sagging of 11 KV / 33 KV line in 3 phase (3 Phase 3 wire) of ACSR Rabbit as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and profile and sagging chart.

Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(3 phase 4 wire) with G.I. earth wire complete with binding and jumpering as per RESSPO Specn

Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(2 phase 3 wire) with G.I. earth wire complete with binding and jumpering as per RESSPO Specn

Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(1 phase 2 wire) with G.I. earth wire complete with binding and jumpering as per RESSPO Specn

Route cleareance by cutting of tree branches/ proning, loping and chopping of trees for L.T., 11 & 33 KV line.

T-off Connection Complete 11 KV line.

Laying, Sagging & binding of AB cable of size 120 sqmm.(Only for cable,additional provisions to be made for matching accessories inst allation,case of any network modification i.e additionalpole etc. and for actual connection,disonnection as per site condition.

Jointing and fixing of cable jointing kit indoor/outdoor 11 KV XLPE heat shrinkable cable boxes

Cartage of PCC Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21- 50 Km)

Cartage of ST pole SP-33 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km)

Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends (distance 21-50 Km)

Cartage of the 16/25 KVA transformer from store center to construction site with loading and unloading at both points.(Distance 21-50 Km)

Cartage of the 63 KVA transformer from store center to construction site with loading and unloading at both points.(Distance 21-50 K m)

Cartage of the 100 KVA transformer from store center to construction site with loading and unloading at both points.(Distance 21-50 Km)

Headload cartage of PCC Pole from road to site(distance 0-1 Km)

Headload cartage of SP-33 Pole from road to site(distance 0-1 Km)

Headload cartage of SP-55 Pole from road to site(distance 0-1 Km)

Head load cartage of small material(distance 0-1 Km)

Headload cartage of 25 KVA transformer from road to site(distance 0-1 Km)

Headload cartage of 63 KVA transformer from road to site(distance 0-1 Km)

Headload cartage of 100 KVA transformer from road to site(distance 0-1 Km)

DIGGING OF PIT FOR MAKING TRENCH 0.6X0.15X1.5 MTR FT DEPTH, INCLUDING BRICK AND SAND WORK INCLUDING BACK FILLING AS PER RESPO.

Laying Sagging of LT XLPE AB CABLE 3X95+1X70 Sq.mm

Digging of Pit through Hammer at CC, DAMAR Road

Carrage of 11 KV PRMC

ON Site Maintenance of 25 KVA DTR INCLUDES REPLACEMENT OF BUSHING ROD/BALL/ PACKING OF DTR AND REFILLING OF OIL PROVIDED BY UPCL.

ON Site Maintenance of 63 KVA DTR INCLUDES REPLACEMENT OF BUSHING ROD/BALL/ PACKING OF DTR AND REFILLING OF OIL PROVIDED BY UPCL.

Annexure-B (SUPPLY ITEMS)

Supply of X-arm clamp for PCC Pole made of MS flat of size 50x6 mm with suitable size bolt, nut & washers duly painted by red oxide primer . The clamp should be free from any crack, welding & burrs complete in all respects as per sample.

Supply of X-arm clamp for ST SP-55 Pole made of MS flat of size 50x6 mm with suitable size bolt, nut & washers duly painted by red oxide primer . The clamp should be free from any crack, welding & burrs complete in all respects as per sample.

Supply of F-clamps made of MS flat of size 50x6 mm with suitable size bolt, nut & washers duly painted by red oxide primer . The clamp should be free from any crack, welding & burrs complete in all respects as per sample.

Supply of LT clamp for PCC Pole made of MS flat of size 50x6 mm with suitable size bolt, nut & washers duly painted by red oxide primer . The clamp should be free from any crack, welding & burrs complete in all respects as per sample.

Supply of Stay clamp for PCC Pole made of MS flat of size 50x6 mm with suitable size bolt, nut & washers duly painted by red oxide primer . The clamp should be free from any crack, welding & burrs complete in all respects as per sample.

Supply of LT clamp for ST SP-55 Pole made of MS flat of size 50x6 mm with suitable size bolt, nut & washers duly painted by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respects as per sample.

Supply of Stay clamp for ST SP-55 Pole with Stay insulator made of MS flat of size 50x6 mm with suitable size bolt, nut & washers duly painted by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respects as per sample.

Supply of M.S. Half Clamps for fixing of Fuse set

Supply of double pole clamp for PCC Pole made of MS flat of size 50x6 mm with suitable size bolt, nut & washers duly painted by red oxide primer . The clamp should be free from any crack, welding & burrs complete in all respects as per sample.

Supply of double pole clamp for ST SP-55 Pole made of MS flat of size 50x6 mm with suitable size bolt, nut & washers duly painted by red oxide primer . The clamp should be free from any crack, welding & burrs complete in all respects as per sample.

Supply of LT Shackle insulator 75x90 mm size with Bolt,Nut & washers

Supply of Stay Insulator

Supply of Share head type Insulated piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120sq.mm to 120sq.mm jumpering for Line to line taping (Tyco/RPG/3M. make) as per UPCL Specification.

Supply of Share head type Insulated piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95sq.mm to 95sq.mm jumpering for Line to DB taping (Tyco/RPG/3M. make) as per UPCL Specification.

Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer (Sintex make or other ISI mark reputed company ) with Panel Lock with key) (As per drawing attached)

Supply of Alluminium Lug 120 sq. mm for Transformer.

M/S J K ELECTRICALS

MANRAJ ELECTRICAL & INFRASTRUCTURE