Providing Electrical connections for the Scient Annex Building

Amount

WIRING IN STEEL & PVC CONDUIT

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules,GI box alongwith modular base & cover platefor modular switches in recess etc. as required.

8 Module (125mmX125mm)

12 Module (200mmX150nnm)

DLP plasticTrunking wiring (Make: Legrand/MK)

DLP Pastic Trunking 105x50mm and accessories Flexible cover 85mm -1No, Joints for cover 85mm width-1No,Basejoint- 25Nos ,Clips - 15Nos , Separation partition-1No, Endcap - 2No, Internal angles-adjustable from 80 degr - 120 deg - 1No, VDI accessories for internal angles-1No, VDI accessories for external angles - 1No, Flat angles -1No, VDI accessories for flat angles-1No, Flat junctions-1No, Flat junctions for specific size- tap off to an 80mm wide branch-1No, VDI accessories for juctions -1No, Wall crossing -1No, Capacity change -1No, Capacity change-1No, partition junction -1No, Cable ties base -1No. (Make: Legrand/MK

DLP Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed as required.(Make: Finolex/Polycab/RR)

2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire

2 X 6.0 sq. mm + 1 X 6.0 sq. mm earth wire

MCCB, MCB & DB'S

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

125 A,36KA,FPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

Supplying and fixing of following ways surface/recess mounting, vertical type, 415 V, TPN MOB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note: Vertical type MOB TPDB is normally used where 3 phase outlets are required.)

8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MOB DB complete with connections, testing andcommissioning etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following rating,Three/four pole,415 volts,Isolator/MCB in the existing MCB/DB complete with connections,testing and commissioning erc.as required.

Triple Pole 40-63A MCB

Supply and fixing of rotary handle including necessary extender, drilling slots in cubical panel etc as required

DN1 160-250 Rotary Handle

EARTHING

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washerspaced at 50mm)

Providing and fixing 6 SWG dia GI. wire on surface or in recess for loop earthing as required.

Supplying and fixing cosmos earthig electrode systems.

COSMOS ROMA 40mm DIA 2 Mtrs LENGTH 7,576.00 each 7,576.00 WITH MOISTURE ENHANCER 25 Kg.

MV CABLE LAYING

Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 35 sq. mm and upto 95 sq. mm

MV CABLE JOINTING & END TERMINATION

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

312 X 70 sq. mm (38mm)

MISC. CIVIL ITEMS

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

63 mm dia (00-63 mm & ID-51 mm nominal)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Supplying of Cables

Supply of aluminium Armoured XLPE UG CABLE 1.1KV as per ISI Specification IS:7098/ (Part-I) 1988 with latest amendments.

3½ X 70 sq. mm

Supply of Light Fixtures with Lamps

Supply and fixing of industrial patten suitable for TL5 lamp 28w Available with optional reflector. (Ma k e : Bajaj ,Crompton Greaves & philips/Equivalent etc) (with 2 years manufacturer's warranty)

22W 4 Feet LED batten BN021C LED22S

Supply and fixing of chain and hook suitable for fixing high bay LED light fitting. Installation above 10 meter height

Supply and fixing of high efficiency round high bay in PDC housing, efficacy >125 lm/W and 10KV SPD & ingress protection of IP 66, (With a minimum 5 year warranty) (Make - Crompton, Phlips or equt)

CIP-320-80-57-60D-HL4-GL-NSR

FAN AND REWINDING WORKS

Supply and fixing of heavy duty 960 RPM exhaust fan of following sweep, suitable for operation on 230 Volts, single phase, 50 Hz, AC Supply including suitable size louvers etc., as required

Supplying and fixing of wall mounting fan of following 450mm sweep , suitable for operation on 230 Volts, single phase, 50 Hz, AC Supply including wall braket rod and resistance type regulator as required.

Heavy Duty

Power Flo System

MIC Engineers and Consultants