Kerala

Active

Works

Civil Works - Water Works

ChenkottukonamWard - Laying MS Pipe Line in Idathara - Kannettu - Aiyyankoikkal Road

Kerala Water Authority

Kazhakoottam Section | Thiruvananthapuram, Kerala

Amount: Refer DocsCloses: 28 Sept 2026Due tomorrow

Timeline

Published19 Sept 2026
Closes28 Sept 2026
Bid Opening29 Sept 2026

Tender Value

Refer Docs

EMD Value

₹9,865

Closing Date

28 Sept 2026, 11:00 amDue tomorrow

Tender Inviting Organisation

Name

RohitSV

Address

AssistantExecutiveEngineer,WWWESTSubdivision,Pongummoodu

Work Description

OandM - Water Supply Schemes - TMC - Chenkottukonam Ward - Laying MS Pipe Line in Idathara - Kannettu - Aiyyankoikkal Road - Pipeline Work

Tender Information

Tender ID

2026_KWA_871243_1

Reference Number

17/AEE/PMD/5925/2026_26_2_1/1

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Item Rate

Location

Kazhakoottam Section

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredScanned copy of Contractor License (.pdf)

RequiredScanned copy of Preliminary Agreement (.pdf)

RequiredForm No.83 - NIT (.pdf)

RequiredDigitally signed tender schedule BoQ (.xls)

RequiredScanned copy of LD clause (.pdf)

RequiredScanned copy of PWD and KWA registration certificate (.pdf)

RequiredScanned copy of GST registration certificate (.pdf)

Fee & Financial Details

Tender Fee Amount

₹870

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹9,865

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

19 Sept 2026

Published

19 Sept 2026

Bid Opening

29 Sept 2026

Download Starts

19 Sept 2026

Download Ends

28 Sept 2026

Submission Starts

19 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (28 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Pipe laying work
1.001	15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)	0.23	cum	-	-
1.002	100.37.5.1:In situ fabrication of M.S. pipes of size 100mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.	30	metre	-	-
1.003	100.37.5.2:Fabricating M.S. flanges of diameter 100mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.	4	no	-	-
1.004	OD105067/2026-2027:In situ fabrication of M.S. Bend of size 100mm (I.D.) with various angle as site condition using 8mm thick M.S. pre-fabricated pipe including cost and conveyance charges of M.S. pipe, all fabrication charges, hire charges of power generator , cutting, welding, bending and grinding machine charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.	12	no	-	-
1.005	OD105091/2026-2027:Conveying and placing in position 100mm MS pre fabricated pipe 8mm thick ,line and level as site condition including cost of labour charges necessary support etc. complete	30	metre	-	-
1.006	100.37.5.3:Cutting 100mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	15	no	-	-
1.007	100.37.5.4:Welding 100mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	30	no	-	-
1.008	100.37.5.5:Grinding cut and weld edges of 100mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	45	no	-	-
1.009	13.65.1:Painting with black anti- corrosive bitumastic paint of approved brand and manufacture to give an even shade:Two or more coats on new work	10.93	sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

KWAGeneralConditionsforeTenderingV5.pdf

PDF • 0.69 MB

Tendernotice_1.pdf

PDF • 0.06 MB

Work Item Documents

BidDocument.pdf

Tender Documents • 2.13 MB

BOQ_1476582.xls

BOQ • 0.32 MB

SPLAgreement.pdf

Tender Documents • 0.17 MB

SPLSUPPLY.pdf

Tender Documents • 0.17 MB

SPLPerGuarantee.pdf

Tender Documents • 0.24 MB

WORKAWARDING.pdf

Additional Documents • 0.16 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Pipe laying work
1.001	15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)	0.23	cum	-	-
1.002	100.37.5.1:In situ fabrication of M.S. pipes of size 100mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.	30	metre	-	-
1.003	100.37.5.2:Fabricating M.S. flanges of diameter 100mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.	4	no	-	-
1.004	OD105067/2026-2027:In situ fabrication of M.S. Bend of size 100mm (I.D.) with various angle as site condition using 8mm thick M.S. pre-fabricated pipe including cost and conveyance charges of M.S. pipe, all fabrication charges, hire charges of power generator , cutting, welding, bending and grinding machine charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.	12	no	-	-
1.005	OD105091/2026-2027:Conveying and placing in position 100mm MS pre fabricated pipe 8mm thick ,line and level as site condition including cost of labour charges necessary support etc. complete	30	metre	-	-
1.006	100.37.5.3:Cutting 100mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	15	no	-	-
1.007	100.37.5.4:Welding 100mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	30	no	-	-
1.008	100.37.5.5:Grinding cut and weld edges of 100mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	45	no	-	-
1.009	13.65.1:Painting with black anti- corrosive bitumastic paint of approved brand and manufacture to give an even shade:Two or more coats on new work	10.93	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Pipe laying work

1.001

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

0.23

cum

1.002

100.37.5.1:In situ fabrication of M.S. pipes of size 100mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

metre

1.003

100.37.5.2:Fabricating M.S. flanges of diameter 100mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

1.004

OD105067/2026-2027:In situ fabrication of M.S. Bend of size 100mm (I.D.) with various angle as site condition using 8mm thick M.S. pre-fabricated pipe including cost and conveyance charges of M.S. pipe, all fabrication charges, hire charges of power generator , cutting, welding, bending and grinding machine charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

1.005

OD105091/2026-2027:Conveying and placing in position 100mm MS pre fabricated pipe 8mm thick ,line and level as site condition including cost of labour charges necessary support etc. complete

metre

1.006

100.37.5.3:Cutting 100mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

1.007

100.37.5.4:Welding 100mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

1.008

100.37.5.5:Grinding cut and weld edges of 100mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

1.009

13.65.1:Painting with black anti- corrosive bitumastic paint of approved brand and manufacture to give an even shade:Two or more coats on new work

10.93

sqm