Special Repairs And Maintenance Of Deep Bhavan Gandhi Nager, Kadavanthra, Kochi

Amount

Up rooting the vegetation on the walls of the Building including cutting and removing the plants & their roots from the walls of the building & trimming of trees with all scafolding charges etc comlete as directed.

Demolishing BRICK stone work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in cment mortar.

Dismantling C.I. pipes/ including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at sitewithin 50 metre lead as per direction of Engineer-in-charge:Up to 150 mm diameter with all charges and scaffolding etc complete.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapesand sizes in :From ground level upto floor V level Cement mortar 1:6 (1 cement : 6 coarse sand)

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length . Secnd class Teak wood

Providing and fixing panelled or panelled and glazed shutters for doors ,windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws,excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge 35 mm thick shutters including all brass fittings like aldrops, towerbolts , handles etc

Repairs to the panelling work with Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type

Providing and fixing false ceiling at all heights with GYPISUMBOARD and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge.

Supplying and fixing of roller blinds of approved quality to the transit accomdation & conference hall with roller blinds of reputed manufacturer with approved quality and colour including supply of all materials toos and plants etc as directed

Replaceing the damaged electical duct line drawn from the side of electrcal control room to water pump provided on the botton of the landing of stair case . The duct shall be fabricated out of G I sheet of 1mm thick ,the sheet to be screwed to the RCC roof as per teh Diretion of the Engineer in charge

Providing and fixing cast iron grill hand railing work made out of round verical bars pipe and per drawing and design . Painting the surface of the gate with synthatic enemel paint over a coat of zinc chromate primer ,supply of all materials ,labour , tools & plants etc compler as directed.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing in position powder coated heavy gauge Aluminum partly fixed and partly sliding window with frame and shutter with built-up standard tubular section /appropriate z section and other sections of approved make conforming to IS:733 and IS:1285, fixed with raul plug and screws or with fixing clips or with expansion hold fasteners, including necessary filling up of gaps at junction, at top, bottom and side with required pvc/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and joined mechanically wherever required including cleat angle, aluminium snap beading for glazing, paneling, stainless steel screws, Neoprene/EPDM gasket in groove ,lock and all other necessary fittings with 4 mm thick float glass for all openings provided for windows including supply of all materials, labours, tools & plants, fabrication charge and scaffolding etc, complete as directed .

Providing fly proof shutter with 30mm wooden frame and Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading including all brass fittings like aldrops, towerbolts , handles etc(3269.85+1458.60) =

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kind of soil

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1)and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after rapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Providing and fixing Ist quality ceramic glazed floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(300X300 TILES)

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5 19.19.1.1 Rectangular shape 600x450 mm internal dimensions

Painting with Acrilic emelsium paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Wall painting Finishing walls with Acrylic Smooth exterior paint of required shade :(Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint, for doors and windows having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. interior faces of Lighthouse

Painting with synthetic enamel paint for metal surface, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. interior faces of Lighthouse

French spirit polishing :Two or more coats on new works including a coat of wood filler

Provding netlon mesh to the top of the rolling shutter cover in the entrance patio to prevent the entry of piegeon

Pertty repairs to the Doors and windows including replacement of stopper etc

Overhauling the steel rolling shutters/ collpsible steel shutter of the of the office building for easy opening and closing

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked black solid plastic seat and lid

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

20 mm nominal outer dia Pipes

50 mm nominal inner dia Pipes

100 mm nominal inner dia Pipes

150 mm nominal inner dia Pipes

20mm CP Brass bid cock

20mm CP brass stop cock

20mm GM wheel valve

50mm GM weel valve

Periodical cleaning of septic tanks and petty repair to sewage line including removal of sludge with mechanised pump and disposing the sludgefor office

Bailing out water from the sump /well at deep bhavan, including removal of all debrises/mud etc, disposal of the debris with in a lead of 50m

Cleaning the top and bottom of the glass provided in the top of purgola of parking area

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm Thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing carpet grass to the sides of the water fountain and as directed incuding providing red earth base over 1 mm plastic sheet to avoid growth of veeds,watering and maintaining the grass for a period of two months by the contractor and handed over , supply of all materials, labour for laying , tools and plants etc complete as directed

Providing and laying selecetd earth in layers

Providing and Spreading plastic sheet

Providing carpet grass

Wall painting Finishing walls with Acrylic Smooth exterior paint of required shade :(Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing wooden shelf cum long seater with top cushion of 50mm thick coverd with rexin and shelf to be covered with shutter with lock and key arrangements for the use at security cabin

Provivion of heavy duty slotted angle rack of size 1.2mx1.8mx0.45m size with 5 shelves . The external faces to be painted with synthetic enamel paint two coats over a coat of zic chromate primer

Reapirs to the damaed door of Generator shed with tubular section and hinges with loacking arrangment . The steel members to be painted with synthetic enamel paint two coats over a coat of zic chromate primer

Provision of rubber mat of 0.90mx1.20m size for electrical control room

Ajayakumar.M.C

SAI WOOD CRAFTS