CA NO. CWE BLY / GE(E) / 113 OF 2021-2022 REPAIR TO CERTAIN ROADS AND ROAD FURNITURE AND ROAD MARKING PAINT UNDER GE(E) BAREILLY

Amount

M&L for repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat with bituminous primer VG-10 @ 5 Kg per 10 Sqm, putting in premix bituminous macadam, well rammed and sealed with premixed sand seal coat (9.8 kg of binder with 0.09 Cum of stone chipping, 6.3mm size), again well rammed (including supply of premixed macadam, binder and chipping), depth of potholes exc 30 mm complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors ./ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

Scarifying or picking gravelled macadam or bituminous macadam surface, area n.exc 400 Sqm and exc 50mm & n. exc 100 mm deep complete all as specified and directed.

M&L 100mm thick (compacted thickness) WBM with sand stone coarse aggregate of grading 1 (90 to 40 mm size), lime stone, spread , rolled and consolidated to gradient and camber required using sand stone aggregates complete all as specified.

M&L for Preparing unsurfaced water bound macadam top surfces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat with bituminous primer (paving bitumin) @ 10kg per 10 sqm complete all as specified and directed.

M&L for preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer at 5 Kg per 10 Sqm VG-10 (Paving bitumen) complete all as specified and directed.

M&L for bituminous premix asphaltic semi dense asphaltic concrete, 30 mm consolidated thickness with 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted, mixed in mechanical hot mix plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tonne power roller to required compaction complete all as specified and directed. Note :(i) Design Mix for SDAC shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate. (ii) Aggregates for Bituminous works shall conform to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications). Note for item No. 07: Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 40/- per Kg of bitumen (less consumed) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula.

M&L for applying evenly a priming/ tack coat with bituminous primer at 5 Kg per 10 Sqm VG-10 (Paving bitumen) complete all as specified and directed.

M&L for Premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note :(i) Aggregates for Bituminous works shall conform to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications) Note for item No 9: Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 40/- per Kg of bitumen (less consumed) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula.

M&L for Precast Cement Concrete 1:2:4 , type B0 , ( using 12.5 mm graded crushed stone aggregate ) as in kerbs stone etc. rounded or chamfered on edges of size 300mm X 100 mm X 450 mm & set in CM (1:4) including excavation and removing complete all as specified and directed .

Removing and refixing of existing precast cement concrete kerb stone with allignment and jointed in CM 1:4 including excavation and earthwork complete all as specified and directed.

M&L for 75 mm thick PCC , (1:4:8) type D-2, (using 40mm graded stone aggregate) as in sub base for floor complete all as specified and directed.

M&L for 100 mm thick , precast cement concrete rubber moulded interlocking paver blocks of triangular / Zigzag / Haxagonal in shape or design as approved, ,with grey cement and pigment , grade M50 and conforming to IS- 15658-2006 , laid over and including a layer of 40 mm thick sand cushion including filling the joints with sand , as in floors/ paths/ pavings etc, complete all as specified and directed.

-Ditto- all as per Srl Item No 13 above but except interlocking paver blocks.

S&F in repair Cat eye,Solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No 972.0 fixed with & including MS stud of suitable size as pre manufacturers instructions complete all as specified and directed.

S&F in repair Solar cat eye,aluminium alloy shall (100% waterproofing design according to 65) of size 125mmx125mmx25mm (Shank 65mm) of high efficiency,Monorystafi,solar panel 2.4V/03 Watt one Ni-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufacturers instructions complete all as specified and directed.

S&F in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height, duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector redium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4(150x150x300mm) type B-1 complete all as specified and directed.

S&F in repair road rummble straight 300mm x 150mm made out of hard acrylic polmers of colour yellow and black with both side reflector for fixing with suitable bitumen and including filling with PCC 1:2:4 complete all as specified and directed.

S&Fin repair of road safety 1400mm dia convex mirror with frame made out of H2 polycarbonate reflective mirror having body ABS/fibre suitable for indoor/outdoor use with hood complete with mounting hardware including suitable height/dia of MS tubular pipe with painting and grouting with PCC 1:2:4 complete all as specified and directed.

M&L for preparing bituminous surface of road and marking 2.5mm thick centre lines stop line, dashes, arrows etc and the like n.exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved make complete all as specified and directed.

M&L for preparation of new or previously treated surfaces of kerb stones and applying one coat of Kerb painting with glossy paints for day and night visibility with different color combinations black/white or yellow/black over one coat of priming paint complete all as specifified and directed

Note : Tenderers may note that amount of credit Rs 2,886.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/s Agarwal Builders

M/S AGARWAL CONTRACTORS