CPPP

Active

Works

Civil Works - Water Works

Construction of deep tube well/bore well with 20 HP submersible pump at Bn HQ KMS Wala of 155 Bn BSF under SHQ BSF FZR

DG,BSF,MHA

KMS Wala 155 BN BSF | Firozepur, Punjab

Amount: ₹6.8 LCloses: 16 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published10 Oct 2026
Closes16 Oct 2026
Bid Opening17 Oct 2026

Tender Value

₹6.8 L

EMD Value

₹13,659

Closing Date

16 Oct 2026, 11:00 am5d left

Tender Inviting Organisation

Name

DC(WORKS) /EE(CIVIL) FTR HQ BSF PUNJAB

Address

BSF Campus FTR HQ BSF Jalandhar Punjab

Work Description

Construction of deep tube well/bore well with 20 HP submersible pump at Bn HQ KMS Wala of 155 Bn BSF under SHQ BSF FZR

Tender Information

Tender ID

2026_BSF_929627_1

Reference Number

23/ENGG/FTR-PB/NIT/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Percentage

Period of Work

75 days

Location

KMS Wala 155 BN BSF

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per NIT

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical

RequiredEnlistment order of the Contractor. (.pdf)

RequiredEarnest Money in the form of Insurance Surety Bonds, Account Payee Demand Draft, Fixed Deposit Recei (.pdf)

RequiredCopy of receipt for deposition of original EMD issued from DDO of any BSF Establishment (i.e. Comman (.pdf)

RequiredContact details of the Contractor in separate sheet mobile number email id mailing adresss (.pdf)

RequiredGST registration certificate, if already obtained by the bidder (.pdf)

RequiredCertificates of Work Experience (.pdf)

RequiredIWe undertake and confirm that eligible similar work(s) has/have not been got executed through ano (.pdf)

RequiredPAN Card (.pdf)

RequiredEPF and ESIC Registration certificate as applicable (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹13,659

Important Dates

Last Activity

10 Oct 2026

Published

10 Oct 2026

Bid Opening

17 Oct 2026

Download Starts

10 Oct 2026

Download Ends

16 Oct 2026

Submission Starts

10 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (13 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing and laying flanged C.I. standard specials such as tees, bends, collars, caps etc. suitable for flanged jointing as per IS:1538 up to 300 mm dia	0.1	quintal	8,672.49	₹867.25
2	Providing flanged joints to double flanged C.I./D.I. pipes and specials including testing of joints: 100 mm diameter	25	each	323.04	₹8,076
3	Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. 100 mm diameter Class II	2	each	4,851.23	₹9,702.46
4	Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 100 mm dia	2	each	8,652.89	₹17,305.78
5	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 350 mm dia	90	Mtr	753.15	₹67,783.5
6	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 350 mm dia	60	Mtr	892.63	₹53,557.8
7	Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge.	15	cum	1,969.84	₹29,547.6
8	Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia having minimum wall thickness 5.40 mm	90	Mtr	2,376.8	₹2,13,912
9	Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumastic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia	60	Mtr	2,501.63	₹1,50,097.8
10	Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.	18	hour	1,055.75	₹19,003.5

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.56 MB

Work Item Documents

BOQ_977078.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing and laying flanged C.I. standard specials such as tees, bends, collars, caps etc. suitable for flanged jointing as per IS:1538 up to 300 mm dia

0.1

quintal

8,672.49

₹867.25

Providing flanged joints to double flanged C.I./D.I. pipes and specials including testing of joints: 100 mm diameter

each

323.04

₹8,076

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. 100 mm diameter Class II

each

4,851.23

₹9,702.46

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 100 mm dia

each

8,652.89

₹17,305.78

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 350 mm dia

Mtr

753.15

₹67,783.5

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 350 mm dia

Mtr

892.63

₹53,557.8

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge.

cum

1,969.84

₹29,547.6

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia having minimum wall thickness 5.40 mm

Mtr

2,376.8

₹2,13,912

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumastic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Mtr

2,501.63

₹1,50,097.8

Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

hour

1,055.75

₹19,003.5