CONSTRUCTION WORK OF MUNICIPALITY BUILDING AT KHAMBHAT NAGARPALIKA UNDER: SWARNIM JYANTI MUKHYA MANTRI SAHERI VIKAS YOJANA. ( YEAR: 2025-26) GRANT ( SECOND ATTEMPT).

Grand Total Rs.

Grand Total Rs.

Total Amount Rs.

SBD SECTION-7 BILL OF QUANTITIES-433

Note : 3 I/ We have read the conditions mentioned in this tender and agree to abide by the same.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the

Signature of Contractor President Chief Officer

Khambhat Nagarpalika Khambhat Nagarpalika

Khambhat Khambhat

SBD SECTION-7 BILL OF QUANTITIES-434

KHAMBHAT MUNICIPALITY, KHAMBHAT

CONSTRUCTION OF MUNICIPALITY BUILDING, AT KHAMBHAT.

Qty. Description Unit Amount

1 591.00 Excavation for Foundation upto 1.5 m. Depth including sorting

Cmt. out and stacking of useful materials and disposing of excavated

stuff upto 50 Meter lead (A) (loose or soft soil)

2 285.50 Excavation for Foundation from depth 1.5 m. to 3.0 m. including

Cmt. sorting out and stacking of useful materials and disposing of

excavated stuff upto 50 Meter lead (A) (loose or soft soil). For

column. 136.30 Cmt.

3 876.50 Filling available excavated earth (excluding Rock) in trenches.

Cmt. Plinth, sides of foundations etc. in layers not exceeding 20cm.

In depth consolidating each disposited layer by ramming and

4 74.50 Filling in foundation and plinth with murrum or selected soil in

Cmt. layers of 20cm thickness including watering, ramming and

consolidating etc. complete.

5 683.00 Applying general insecticide pest control treatment to floors,

Smt. cupboards etc including labour materials etc. complete. Using

Imidacloprid 20 EC As Per 6113 pests Consentration Weight

0.50 percent is recommended on litre chemical emulsion dilute

with 39 liter of water will give. Total dilute concrentration with

will be 40 litre inclusive of one litre chemical emulsion

application 0.5 litre chemical /Sqm of surface is recommended

6 77.50 Providing and laying cement concrete 1:3:6 (1 Cement,

Cmt coarse sand, 6 crushed stone aggregates 20mm nominal size)

and curing complete excluding cost of formwork in Foundation

and Plinth. Do For PCC. 3095.25 Cmt.

7 169.50 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

Column footings.

SBD SECTION-7 BILL OF QUANTITIES-435

8 27.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork But Excluding

the cost of reinforcement for reinforced concrete work in

Column upto Plinth Level having any cross section area.

9 60.50 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

Columns having any cross section area for all floors.

10 6.00 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in RCC

WALL having any cross section area for all floors.

11 59.50 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in Ground

Beam having any cross section area.

12 7.50 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in coping.

13 8.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in

Lintel/Chajjas for all floor.

14 109.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in Slab

having any thickness for all floors.

15 60.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in Beams

having any cross section area for all floors.

16 5.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in Stairs

for all floors. 7792.15 Cmt.

54950.00 Providing ISI Mark TMT Bar Fe-500 Reinforcment for R.C.C

Kgs. work including bending, binding and placing in position etc.

complete for all Floors. 77.29 Kg.

SBD SECTION-7 BILL OF QUANTITIES-436

18 59.50 Providing and Laying brick work using common burnt clay

Cmt. building bricks (Conventional) having crushing strength not less

than 35 Kg./Sq. Cm. in foundation and plinth in Cement Mortar.

(1:6) (1 Cement : 6 fine sand). (up to Plinth Level)

19 155.50 Providing and Laying Brick work using common burnt clay

Cmt. building bricks (Conventional) having crushing strength not less

than 35 Kg./Sq. Cm. in Super Structure Above Plinth level in

Cement Mortar (1:6) (1 Cement : 6 fine sand) etc. complete for

20 37.50 Providing, laying and constructing half brick masonry work in

Smt. super structure having crushing strength not less than

Kg./Sq. Cm. in cement mortar (1:4) (1 Cement : 4 Coarse sand)

etc. complete for All Floors.

21 32.50 Providing and fixing 35mm thick flush door shutters, solid core

Smt. construction with frame of first class hardwood with cross band

and face veneer or plywood face panels, including anodised

alluminium butt hinges with necessary screws. (A) Decorative

type and bright finished M.S. Piano hinges of Nickel plated

piano hinges in flush door shutters.

22 22.00 Providing and fixing window having extruded alluminium color

Smt. powder coated section frame main outer size 95.00mm x

24.00mm x 1.17mm (of jindal Section no: 2459 @ wt.

Kg/Rmt.), horizontal three track member size 92.0 mm x

31.75mm x 1.30mm (of jindal Section no: 8688, @ Wt.

0.1.07Kg./Mt.), vertical member of size 92mm x 31.75mm x

1.50mm (of jindal section no: 8933@ Wt. 1.06 Kg/mt.) with

sliding shutters of horizontal member size 40mm x 18mm x

1.29mm (of Jindal section no: 8947@ Wt. of 0.456 Kg./Mt)

vertical member of size 40mm x 18mm x 1.29mm (of jindal

Section No : 8949, @ Wt. 0.456 Kg/mt. with 5mm thick

transparent bronze colour tinted float glass with powder coated

alluminium fittings & fixtures and transperent silicon sealent

glass fixing to frame as per details etc. Complete for Window.

23 22.00 Providing and fixing rolling shutters of approved make made of

Smt. 80 mm wide M.S. laths inter-locked together through their entire

length and jointed together at the ends by end locks mounted

on specially designed pipe shaft with bracket plates, guide

channels and arragements for inside and outside locking with

push-pull operation including the cost of hood cover and spring

etc. complete.(A) Shutters having width below 3.5 M.

SBD SECTION-7 BILL OF QUANTITIES-437

24 2.50 Providing and fixing glazed louvered glass windows and

Smt. ventilators with teakwood frame 10cm x 7cm size including

Coats of oil painting to wood work etc. complete.

25 16.00 Providing and fixing standard extruded of alluminium section of

Smt. size 63.50 x 38.10 x 1.95mm (of jindal section no : 4605, @ Wt.

1.094 Kg/ Rmt with color powder coated alluminium frame with

5mm thick transperent bronze color tinted float glass as details

etc. complete for Fix Windows/Glazing.

26 25.00 Supplying and fitting Stainless Steel railing 3" pipe as hand rail

Rmt. with & S304 grade including required accessories or as

directed by engineer in charge etc. complete.

27 2055.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts

and nuts or by screws. (A) Plain Grills.

28 42.00 Applying Priming Coat on new steel and other metal surface by

Smt. throughly cleaning, oil, grease and scoured with brushes fine

steel wood, scrapers and sand paper with ready mixed priming

paint brushing red lead and Painting two coats with synthetic

enamel paint, brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign matter.

29 927.00 Providing 15mm thick cement plaster in single coat on

Smt. brick/concrete wall for interior plastering and finished even and

smooth in cement mortar 1:4 (1 cement : 4 sand) and finishing

with a floating coat of neat cement slurry upto floor two level.

30 617.00 Providing 10mm thick cement plaster in single coat on ceilings

Smt. and soffits of stairs for interior plastering and finished even and

smooth in. Cement Mortar 1:4 ( 1 Cement : 4 Sand) and

finishing with a floating coat of neat cement slurry for all floors.

SBD SECTION-7 BILL OF QUANTITIES-438

31 758.00 Providing 20 mm thick double coat mala cement plaster on

Smt. interior brick/ concrete work for plastering comprising of base

coat of 12 mm thick cement plaster in cement mortar (1 Cement

: 4 coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 ( 1 Cement : 2 coarse sand) finished with

trovel including scaffolding curing etc. complete. Do for Texture

Plaster. 283.95 Smt.

32 379.00 Providing and Applying Textured Plaster of approved

Smt. design/sample with all kinds of material, labor, taxation charges.

Complete. As directed on site by EIC or any concern authority.

33 1544.00 Applying two coats of putty & two coats of primer of approved

Smt. brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

34 927.00 Distempering (Three Coat) with oil bound washable distemper

Smt. of approved brand and manufacture and of required shade on

wall surfaces to give and even shade over and including a

primer coat with alkali resistance primer of approved brand after

throughly brushing the surface free from other foreign matter

and also including preparing the surface even and sand

papered smooth.

35 617.00 Distempering (Three Coat) with oil bound washable distemper

Smt. of approved brand and manufacture and of required shade on

Ceiling & Sloping Roof surfaces to give and even shade over

and including a primer coat with alkali resistance primer of

approved brand after throughly brushing the surface to give and

free from other foreign matter and also including preparing the

surface even and sand papered smooth.

36 758.00 Finishing wall with weather proof exterior emulsion paint on wall

Smt. surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains

of loose powdered materials.etc complete

37 259.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

Smt (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

SBD SECTION-7 BILL OF QUANTITIES-439

38 42.00 Providing and Laying 24" x 24" 8mm thick Antiskid Vitrified tiles

Smt flooring over 20mm (average) base of cement mortar 1:6 (1

cement : 6 coarse sand) on new surface including dismentaling

of existing flooring and jointed with color cement slurry including

finished with flush pointing and cleaning the surface etc.

39 38.00 Providing and laying 24"x24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:3 (1

Cement : 3 Coarse Sand) and jointed with colour cement slurry

including finished with flush pointing and cleaning the surface

etc. complete. For Skirting./Wall Tiles/Dedo

40 68.00 Providing and Laying coloured glazed tiles of the size 300mm x

Smt 200mm x 8mm/300mm x 450mm x 8mm in skirting, riser of

steps and dedo on 10mm thick cement plaster 1:3 (Cement :

coarse sand) and jointed with matching colour cement slurry.

41 77.00 Providing and laying polished Granite tiles 18 mm thick in risers

Smt of steps, skirting Dedo and pillars laid on 10 mm thick cement

mortar 1 : 3 (1 cement : 3 course sand) and jointed with gray

cement slurry mixed with pigment to match the shade of slab

including rubbing, polishing, Moulding etc. complete. For

Flooring, Doors & Windows Edges. 1633.17 Smt

42 308.00 Providing and fixing PVC Printed pain colour false ceiling with

Smt grid type with alluminium frame consisting of 600mm x 600mm

3mm thick plain PVC sheet used as panel insert in a frame work

made using anodized alluminium T section of size 1 x 1 (235 x

25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes

of 2 x 2 (600 x 600mm) The alluminium frame work is supported

from the cceiling with the help of G.I. hook and G.I. wire/6mm

M.S. rods of required sizes to maintain proper level etc. The

aluminium frame work is supported on side wall with the use of

alluminium L section of size 1 x 1 (25 x 25mm) angles etc.

complete as per direction of Engineer in charge. Manufactures

specification and drawing.

43 56.00 Supplying and fixing Board &Sinages with 3mm thick exterior

Smt grade ACP of Aludecore,Alstrong or Eurobond brand with Vinyl

letters [Non Reflective] including propore M.S.Structure of

45x45mm Hollow square box section of 20guage with one coat

of Anticorrossive paint and two coat of oil paint with required

anchoring fastners etc.complete as per directed.

SBD SECTION-7 BILL OF QUANTITIES-440

44 Providing,Supplying & Fixing The Terracotta Jali of the size 8.5"

X 8.5" X 2.5" INIGMA JALI & 8.5" X 8.5" X 2.5" PANAMA JALI.

Including Transportation & Loading Unloading Charges

Excluding labour Charges Etc. Complete. As directed on site by

EIC or any concern authority.

1313.00 For 8.5" X 8.5" X 2.5" INIGMA JALI 55.55 Nos.

1313.00 For 8.5" X 8.5" X 2.5" PANAMA JALI. 45.45 Nos.

SBD SECTION-7 BILL OF QUANTITIES-441

KHAMBHAT MUNICIPALITY, KHAMBHAT

CONSTRUCTION OF MUNICIPALITY BUILDING, AT KHAMBHAT.

Qty. Description Unit Amount

1 48.50 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

Columns having any cross section area.

2 4.00 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in RCC

WALL having any cross section area for all floors.

3 11.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in

Lintel/Chajjas for all floor. 7827.21 Cmt.

4 109.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in Slab

having any thickness for all floors.

5 71.50 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in

Beams having any cross section area for all floors.

6 5.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in Stairs

for all floors.

31400.00 Providing ISI Mark TMT Bar Fe-500 Reinforcment for R.C.C

Kgs. work including bending, binding and placing in position etc.

complete for all Floors.

SBD SECTION-7 BILL OF QUANTITIES-442

8 147.50 Providing and Laying Brick work using common burnt clay

Cmt. building bricks (Conventional) having crushing strength not

less than 35 Kg./Sq. Cm. in Super Structure Above Plinth level

in Cement Mortar (1:6) (1 Cement : 6 fine sand) etc. complete

for any Height. 4538.48 Cmt.

9 105.00 Providing, laying and constructing half brick masonry work in

Smt. super structure having crushing strength not less than

Kg./Sq. Cm. in cement mortar (1:4) (1 Cement : 4 Coarse

sand) etc. complete for All Floors.

10 28.50 Providing and fixing 35mm thick flush door shutters, solid core

Smt. construction with frame of first class hardwood with cross

band and face veneer or plywood face panels, including

anodised alluminium butt hinges with necessary screws. (A)

Decorative type and bright finished M.S. Piano hinges of

Nickel plated piano hinges in flush door shutters.

11 38.00 Providing and fixing window having extruded alluminium color

Smt. powder coated section frame main outer size 95.00mm x

24.00mm x 1.17mm (of jindal Section no: 2459 @ wt.

Kg/Rmt.), horizontal three track member size 92.0 mm x

31.75mm x 1.30mm (of jindal Section no: 8688, @ Wt.

0.1.07Kg./Mt.), vertical member of size 92mm x 31.75mm x

1.50mm (of jindal section no: 8933@ Wt. 1.06 Kg/mt.) with

sliding shutters of horizontal member size 40mm x 18mm x

1.29mm (of Jindal section no: 8947@ Wt. of 0.456 Kg./Mt)

vertical member of size 40mm x 18mm x 1.29mm (of jindal

Section No : 8949, @ Wt. 0.456 Kg/mt. with 5mm thick

transparent bronze colour tinted float glass with powder

coated alluminium fittings & fixtures and transperent silicon

sealent glass fixing to frame as per details etc. Complete for

12 9.50 Providing and fixing FRP frame size 125 x 65 mm and 35 mm

Smt. thick FRP shutter with wood grain raised panneled design

finish shutter having extra reinforcement on side & edges in

Gel coat finish. The core of the shutter & frame is to be filed up

with injected polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & Shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkhli.

Rates are to be inclusive of S.S.hinges with fastener Sleeve &

alluminium fixtures & fastenings. 2019.98 Smt.

13 3.00 Providing and fixing glazed louvered glass windows and

Smt. ventilators with teakwood frame 10cm x 7cm size including

Coats of oil painting to wood work etc. complete.

SBD SECTION-7 BILL OF QUANTITIES-443

14 60.00 Providing and fixing standard extruded of alluminium section

Smt. of size 63.50 x 38.10 x 1.95mm (of jindal section no : 4605, @

Wt. 1.094 Kg/ Rmt with color powder coated alluminium frame

with 5mm thick transperent bronze color tinted float glass as

details etc. complete for Fix Windows/Glazing.

15 10.00 Supplying and fitting Stainless Steel railing 3" pipe as hand

Rmt. rail with & S304 grade including required accessories or as

directed by engineer in charge etc. complete.

16 945.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts

and nuts or by screws. (A) Plain Grills.

17 38.00 Applying Priming Coat on new steel and other metal surface

Smt. by throughly cleaning, oil, grease and scoured with brushes

fine steel wood, scrapers and sand paper with ready mixed

priming paint brushing red lead and Painting two coats with

synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign

matter. 105.49 Smt.

18 1503.00 Providing 15mm thick cement plaster in single coat on

Smt. brick/concrete wall for interior plastering and finished even and

smooth in cement mortar 1:4 (1 cement : 4 sand) and finishing

with a floating coat of neat cement slurry upto floor two level.

19 855.00 Providing 10mm thick cement plaster in single coat on ceilings

Smt. and soffits of stairs for interior plastering and finished even

and smooth in. Cement Mortar 1:4 ( 1 Cement : 4 Sand) and

finishing with a floating coat of neat cement slurry for all floors.

20 391.00 Providing 20 mm thick double coat mala cement plaster on

Smt. interior brick/ concrete work for plastering comprising of base

coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 ( 1 Cement : 2 coarse sand)

finished with trovel including scaffolding curing etc. complete.

Do for Texture Plaster. 283.95 Smt.

21 2358.00 Applying two coats of putty & two coats of primer of approved

Smt. brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

smooth. 40.59 Smt.

SBD SECTION-7 BILL OF QUANTITIES-444

22 1503.00 Distempering (Three Coat) with oil bound washable distemper

Smt. of approved brand and manufacture and of required shade on

wall surfaces to give and even shade over and including a

primer coat with alkali resistance primer of approved brand

after throughly brushing the surface free from other foreign

matter and also including preparing the surface even and sand

papered smooth. 104.07 Smt.

23 855.00 Distempering (Three Coat) with oil bound washable distemper

Smt. of approved brand and manufacture and of required shade on

Ceiling & Sloping Roof surfaces to give and even shade over

and including a primer coat with alkali resistance primer of

approved brand after throughly brushing the surface to give

and free from other foreign matter and also including

preparing the surface even and sand papered smooth.

24 391.00 Finishing wall with weather proof exterior emulsion paint on

Smt. wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

25 196.00 Providing and Applying Textured Plaster of approved

Smt. design/sample with all kinds of material, labor, taxation

charges. Complete. As directed on site by EIC or any concern

26 613.00 Providing and laying 24" x 24" Vitrified 8 mm to 10mm thick

Smt tiles flooring over 20 mm (average) base of cement mortar 1:6

(1 Cement : 6 Coarse Sand) and jointed with colour cement

slurry including finished with flush pointing and cleaning the

surface etc. complete. For Flooring. 1311.18 Smt

27 63.00 Providing and laying 24" x 24" Vitrified 8 mm to 10mm thick

Smt tiles flooring over 20 mm (average) base of cement mortar 1:6

(1 Cement : 6 Coarse Sand) and jointed with colour cement

slurry including finished with flush pointing and cleaning the

surface etc. complete. For Flooring (Antiskit).

28 34.00 Providing and laying 24"x24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:3 (1

Cement : 3 Coarse Sand) and jointed with colour cement

slurry including finished with flush pointing and cleaning the

surface etc. complete. For Skirting./Wall Tiles/Dedo

SBD SECTION-7 BILL OF QUANTITIES-445

29 221.00 Providing and Laying coloured glazed tiles of the size 300mm

Smt x 200mm x 8mm/300mm x 450mm x 8mm in skirting, riser of

steps and dedo on 10mm thick cement plaster 1:3 (Cement :

coarse sand) and jointed with matching colour cement slurry.

30 81.00 Providing and laying polished Granite tiles 18 mm thick in

Smt risers of steps, skirting Dedo and pillars laid on 10 mm thick

cement mortar 1 : 3 (1 cement : 3 course sand) and jointed

with gray cement slurry mixed with pigment to match the

shade of slab including rubbing, polishing, Moulding etc.

complete. For Flooring, Doors & Windows Edges.

31 680.00 Providing and fixing PVC Printed pain colour false ceiling with

Smt grid type with alluminium frame consisting of 600mm x 600mm

3mm thick plain PVC sheet used as panel insert in a frame

work made using anodized alluminium T section of size 1 x

(235 x 25mm, 19 gauge or 1 mm thick) in square pattern of

grid sizes of 2 x 2 (600 x 600mm) The alluminium frame work

is supported from the cceiling with the help of G.I. hook and

G.I. wire/6mm M.S. rods of required sizes to maintain proper

level etc. The aluminium frame work is supported on side wall

with the use of alluminium L section of size 1 x 1 (25 x 25mm)

angles etc. complete as per direction of Engineer in charge.

Manufactures specification and drawing.

SBD SECTION-7 BILL OF QUANTITIES-446

KHAMBHAT MUNICIPALITY, KHAMBHAT

CONSTRUCTION OF MUNICIPALITY BUILDING, AT KHAMBHAT.

Qty. Description Unit Amount

1 48.50 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

Columns having any cross section area.

2 4.00 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in RCC

WALL having any cross section area for all floors.

3 10.50 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding the

cost of reinforcement for reinforced concrete work in

Lintel/Chajjas for all floor. 7868.32 Cmt.

4 109.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding the

cost of reinforcement for reinforced concrete work in Slab

having any thickness for all floors.

5 71.50 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding the

cost of reinforcement for reinforced concrete work in Beams

having any cross section area for all floors.

6 5.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding the

cost of reinforcement for reinforced concrete work in Stairs for

all floors. 7874.38 Cmt.

31375.00 Providing ISI Mark TMT Bar Fe-500 Reinforcment for R.C.C

Kgs. work including bending, binding and placing in position etc.

complete for all Floors.

SBD SECTION-7 BILL OF QUANTITIES-447

8 136.00 Providing and Laying Brick work using common burnt clay

Cmt. building bricks (Conventional) having crushing strength not less

than 35 Kg./Sq. Cm. in Super Structure Above Plinth level in

Cement Mortar (1:6) (1 Cement : 6 fine sand) etc. complete for

9 43.50 Providing, laying and constructing half brick masonry work in

Smt. super structure having crushing strength not less than

Kg./Sq. Cm. in cement mortar (1:4) (1 Cement : 4 Coarse sand)

etc. complete for All Floors.

10 31.50 Providing and fixing 35mm thick flush door shutters, solid core

Smt. construction with frame of first class hardwood with cross band

and face veneer or plywood face panels, including anodised

alluminium butt hinges with necessary screws. (A) Decorative

type and bright finished M.S. Piano hinges of Nickel plated piano

hinges in flush door shutters.

11 43.50 Providing and fixing window having extruded alluminium color

Smt. powder coated section frame main outer size 95.00mm x

24.00mm x 1.17mm (of jindal Section no: 2459 @ wt.

Kg/Rmt.), horizontal three track member size 92.0 mm x

31.75mm x 1.30mm (of jindal Section no: 8688, @ Wt.

0.1.07Kg./Mt.), vertical member of size 92mm x 31.75mm x

1.50mm (of jindal section no: 8933@ Wt. 1.06 Kg/mt.) with

sliding shutters of horizontal member size 40mm x 18mm x

1.29mm (of Jindal section no: 8947@ Wt. of 0.456 Kg./Mt)

vertical member of size 40mm x 18mm x 1.29mm (of jindal

Section No : 8949, @ Wt. 0.456 Kg/mt. with 5mm thick

transparent bronze colour tinted float glass with powder coated

alluminium fittings & fixtures and transperent silicon sealent

glass fixing to frame as per details etc. Complete for Window.

12 6.50 Providing and fixing FRP frame size 125 x 65 mm and 35 mm

Smt. thick FRP shutter with wood grain raised panneled design finish

shutter having extra reinforcement on side & edges in Gel coat

finish. The core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fintures. The

whole FRP frame & Shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkhli. Rates are to be

inclusive of S.S.hinges with fastener Sleeve & alluminium

fixtures & fastenings. 2019.98 Smt.

13 2.50 Providing and fixing glazed louvered glass windows and

Smt. ventilators with teakwood frame 10cm x 7cm size including

Coats of oil painting to wood work etc. complete.

SBD SECTION-7 BILL OF QUANTITIES-448

14 60.00 Providing and fixing standard extruded of alluminium section of

Smt. size 63.50 x 38.10 x 1.95mm (of jindal section no : 4605, @ Wt.

1.094 Kg/ Rmt with color powder coated alluminium frame with

5mm thick transperent bronze color tinted float glass as details

etc. complete for Fix Windows/Glazing.

15 10.00 Supplying and fitting Stainless Steel railing 3" pipe as hand rail

Rmt. with & S304 grade including required accessories or as directed

by engineer in charge etc. complete. 555.50 Rmt.

16 1080.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts

and nuts or by screws. (B) Plain Grills. 106.23 Kg.

17 44.00 Applying Priming Coat on new steel and other metal surface by

Smt. throughly cleaning, oil, grease and scoured with brushes fine

steel wood, scrapers and sand paper with ready mixed priming

paint brushing red lead and Painting two coats with synthetic

enamel paint, brushing to give an even shade including cleaning

the surface of all dirt, dust and other foreign matter.

18 1164.00 Providing 15mm thick cement plaster in single coat on

Smt. brick/concrete wall for interior plastering and finished even and

smooth in cement mortar 1:4 (1 cement : 4 sand) and finishing

with a floating coat of neat cement slurry upto floor two level.

19 869.00 Providing 10mm thick cement plaster in single coat on ceilings

Smt. and soffits of stairs for interior plastering and finished even and

smooth in. Cement Mortar 1:4 ( 1 Cement : 4 Sand) and

finishing with a floating coat of neat cement slurry for all floors.

20 430.00 Providing 20 mm thick double coat mala cement plaster on

Smt. interior brick/ concrete work for plastering comprising of base

coat of 12 mm thick cement plaster in cement mortar (1 Cement

: 4 coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 ( 1 Cement : 2 coarse sand) finished with

trovel including scaffolding curing etc. complete. Do for Texture

Plaster. 283.95 Smt.

21 2033.00 Applying two coats of putty & two coats of primer of approved

Smt. brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

smooth. 40.59 Smt.

SBD SECTION-7 BILL OF QUANTITIES-449

22 1164.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer

coat with alkali resistance primer of approved brand after

throughly brushing the surface free from other foreign matter

and also including preparing the surface even and sand

papered smooth.

23 869.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on

Ceiling & Sloping Roof surfaces to give and even shade over

and including a primer coat with alkali resistance primer of

approved brand after throughly brushing the surface to give and

free from other foreign matter and also including preparing the

surface even and sand papered smooth.

24 430.00 Finishing wall with weather proof exterior emulsion paint on wall

Smt. surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains

of loose powdered materials.etc complete 120.26 Smt.

25 215.00 Providing and Applying Textured Plaster of approved

Smt. design/sample with all kinds of material, labor, taxation charges.

Complete. As directed on site by EIC or any concern authority.

26 675.00 Providing and laying 24" x 24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:6 (1

Cement : 6 Coarse Sand) and jointed with colour cement slurry

including finished with flush pointing and cleaning the surface

etc. complete. For Flooring.

27 42.00 Providing and laying 24" x 24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:6 (1

Cement : 6 Coarse Sand) and jointed with colour cement slurry

including finished with flush pointing and cleaning the surface

etc. complete. For Flooring (Antiskit).

28 32.00 Providing and laying 24"x24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:3 (1

Cement : 3 Coarse Sand) and jointed with colour cement slurry

including finished with flush pointing and cleaning the surface

etc. complete. For Skirting./Wall Tiles/Dedo

SBD SECTION-7 BILL OF QUANTITIES-450

29 126.00 Providing and Laying coloured glazed tiles of the size 300mm x

Smt 200mm x 8mm/300mm x 450mm x 8mm in skirting, riser of

steps and dedo on 10mm thick cement plaster 1:3 (Cement :

coarse sand) and jointed with matching colour cement slurry.

30 81.00 Providing and laying polished Granite tiles 18 mm thick in risers

Smt of steps, skirting Dedo and pillars laid on 10 mm thick cement

mortar 1 : 3 (1 cement : 3 course sand) and jointed with gray

cement slurry mixed with pigment to match the shade of slab

including rubbing, polishing, Moulding etc. complete. For

Flooring, Doors & Windows Edges.

31 680.00 Providing and fixing PVC Printed pain colour false ceiling with

Smt grid type with alluminium frame consisting of 600mm x 600mm

3mm thick plain PVC sheet used as panel insert in a frame work

made using anodized alluminium T section of size 1 x 1 (235 x

25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes

of 2 x 2 (600 x 600mm) The alluminium frame work is supported

from the cceiling with the help of G.I. hook and G.I. wire/6mm

M.S. rods of required sizes to maintain proper level etc. The

aluminium frame work is supported on side wall with the use of

alluminium L section of size 1 x 1 (25 x 25mm) angles etc.

complete as per direction of Engineer in charge. Manufactures

specification and drawing.

SBD SECTION-7 BILL OF QUANTITIES-451

KHAMBHAT MUNICIPALITY, KHAMBHAT

CONSTRUCTION OF MUNICIPALITY BUILDING, AT KHAMBHAT.

Qty. Description Unit Amount

1 5.50 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding the

cost of reinforcement for reinforced concrete work in Columns

having any cross section area.

2 2.50 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding the

cost of reinforcement for reinforced concrete work in RCC WALL

having any cross section area for all floors.

3 2.00 Providing and laying controlled cement concrete M-250 and curing

Cmt. complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Lintel/Chajjas for all

4 8.00 Providing and laying controlled cement concrete M-250 and curing

Cmt. complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Slab having any

thickness for all floors.

5 8.50 Providing and laying controlled cement concrete M-250 and curing

Cmt. complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Beams having any

cross section area for all floors.

3600.00 Providing ISI Mark TMT Bar Fe-500 Reinforcment for R.C.C work

Kgs. including bending, binding and placing in position etc. complete

for all Floors.

7 42.00 Providing and Laying Brick work using common burnt clay building

Cmt. bricks (Conventional) having crushing strength not less than

Kg./Sq. Cm. in Super Structure Above Plinth level in Cement

Mortar (1:6) (1 Cement : 6 fine sand) etc. complete for any Height.

SBD SECTION-7 BILL OF QUANTITIES-452

8 5.50 Providing, laying and constructing half brick masonry work in

Smt. super structure having crushing strength not less than 35 Kg./Sq.

Cm. in cement mortar (1:4) (1 Cement : 4 Coarse sand) etc.

complete for All Floors.

9 5.50 Providing and fixing 35mm thick flush door shutters, solid core

Smt. construction with frame of first class hardwood with cross band

and face veneer or plywood face panels, including anodised

alluminium butt hinges with necessary screws. (A) Decorative type

and bright finished M.S. Piano hinges of Nickel plated piano

hinges in flush door shutters.

10 0.00 Providing and fixing standard extruded of alluminium section of

Smt. size 63.50 x 38.10 x 1.95mm (of jindal section no : 4605, @ Wt.

1.094 Kg/ Rmt with color powder coated alluminium frame with

5mm thick transperent bronze color tinted float glass as details

etc. complete for Fix Windows/Glazing.

11 830.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (A) Plain Grills.

12 6.00 Applying Priming Coat on new steel and other metal surface by

Smt. throughly cleaning, oil, grease and scoured with brushes fine steel

wood, scrapers and sand paper with ready mixed priming paint

brushing red lead and Painting two coats with synthetic enamel

paint, brushing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter. 105.49 Smt.

13 53.00 Providing 15mm thick cement plaster in single coat on

Smt. brick/concrete wall for interior plastering and finished even and

smooth in cement mortar 1:4 (1 cement : 4 sand) and finishing

with a floating coat of neat cement slurry upto floor two level.

14 60.00 Providing 10mm thick cement plaster in single coat on ceilings

Smt. and soffits of stairs for interior plastering and finished even and

smooth in. Cement Mortar 1:4 ( 1 Cement : 4 Sand) and finishing

with a floating coat of neat cement slurry for all floors.

15 356.00 Providing 20 mm thick double coat mala cement plaster on interior

Smt. brick/ concrete work for plastering comprising of base coat of

mm thick cement plaster in cement mortar (1 Cement : 4 coarse

sand) in rough finishing and 8 mm thick top coat of cement mortar

1:2 ( 1 Cement : 2 coarse sand) finished with trovel including

scaffolding curing etc. complete. Do for Texture Plaster.

SBD SECTION-7 BILL OF QUANTITIES-453

16 113.00 Applying two coats of putty & two coats of primer of approved

Smt. brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

17 53.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface free from other foreign matter and also

including preparing the surface even and sand papered smooth.

18 60.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on

Ceiling & Sloping Roof surfaces to give and even shade over and

including a primer coat with alkali resistance primer of approved

brand after throughly brushing the surface to give and free from

other foreign matter and also including preparing the surface even

and sand papered smooth. 115.77 Smt.

19 356.00 Finishing wall with weather proof exterior emulsion paint on wall

Smt. surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete 120.26 Smt.

20 178.00 Providing and Applying Textured Plaster of approved

Smt. design/sample with all kinds of material, labor, taxation charges.

Complete. As directed on site by EIC or any concern authority.

21 21.00 Providing and laying 24" x 24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:6 (1

Cement : 6 Coarse Sand) and jointed with colour cement slurry

including finished with flush pointing and cleaning the surface etc.

complete. For Flooring. 1467.72 Smt

22 2.00 Providing and laying 24"x24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:3 (1

Cement : 3 Coarse Sand) and jointed with colour cement slurry

including finished with flush pointing and cleaning the surface etc.

complete. For Skirting.

SBD SECTION-7 BILL OF QUANTITIES-454

23 0.00 Providing and laying polished Granite tiles 18 mm thick in risers of

Smt steps, skirting Dedo and pillars laid on 10 mm thick cement mortar

1 : 3 (1 cement : 3 course sand) and jointed with gray cement

slurry mixed with pigment to match the shade of slab including

rubbing, polishing, Moulding etc. complete. For Flooring, Doors &

Windows Edges. 1633.17 Smt

24 700.00 Providing and Laying Broken China Mosaic flooring for Terrace

Smt using 12mm Broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar

cream out up to surface using white cement including rounding off

junctions and extending them up to 15cm long the wall, clearing

with water and oxailic acid etc. as directed.

25 0.00 Providing and fixing PVC Printed pain colour false ceiling with grid

Smt type with alluminium frame consisting of 600mm x 600mm 3mm

thick plain PVC sheet used as panel insert in a frame work made

using anodized alluminium T section of size 1 x 1 (235 x 25mm,

19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x

(600 x 600mm) The alluminium frame work is supported from the

cceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods of

required sizes to maintain proper level etc. The aluminium frame

work is supported on side wall with the use of alluminium L

section of size 1 x 1 (25 x 25mm) angles etc. complete as per

direction of Engineer in charge. Manufactures specification and

SBD SECTION-7 BILL OF QUANTITIES-455

KHAMBHAT MUNICIPALITY, KHAMBHAT

CONSTRUCTION OF MUNICIPALITY BUILDING, AT KHAMBHAT.

LIFT ROOM (FOURTH FLOOR)

Item Qty. Description Total Unit Amount

1 4.00 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding the

cost of reinforcement for reinforced concrete work in Columns

having any cross section area. 6362.84 Cmt.

2 1.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding the

cost of reinforcement for reinforced concrete work in

Lintel/Chajjas for all floor.

3 5.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding the

cost of reinforcement for reinforced concrete work in Slab having

any thickness for all floors.

4 4.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding the

cost of reinforcement for reinforced concrete work in Beams

having any cross section area for all floors.

1925.00 Providing ISI Mark TMT Bar Fe-500 Reinforcment for R.C.C

Kgs. work including bending, binding and placing in position etc.

complete for all Floors.

6 11.00 Providing and Laying Brick work using common burnt clay

Cmt. building bricks (Conventional) having crushing strength not less

than 35 Kg./Sq. Cm. in Super Structure Above Plinth level in

Cement Mortar (1:6) (1 Cement : 6 fine sand) etc. complete for

7 2.00 Providing and fixing 35mm thick flush door shutters, solid core

Smt. construction with frame of first class hardwood with cross band

and face veneer or plywood face panels, including anodised

alluminium butt hinges with necessary screws. (A) Decorative

type and bright finished M.S. Piano hinges of Nickel plated piano

hinges in flush door shutters. 2753.56 Smt.

SBD SECTION-7 BILL OF QUANTITIES-456

8 2.00 Providing and fixing window having extruded alluminium color

Smt. powder coated section frame main outer size 95.00mm x

24.00mm x 1.17mm (of jindal Section no: 2459 @ wt.

Kg/Rmt.), horizontal three track member size 92.0 mm x

31.75mm x 1.30mm (of jindal Section no: 8688, @ Wt.

0.1.07Kg./Mt.), vertical member of size 92mm x 31.75mm x

1.50mm (of jindal section no: 8933@ Wt. 1.06 Kg/mt.) with

sliding shutters of horizontal member size 40mm x 18mm x

1.29mm (of Jindal section no: 8947@ Wt. of 0.456 Kg./Mt)

vertical member of size 40mm x 18mm x 1.29mm (of jindal

Section No : 8949, @ Wt. 0.456 Kg/mt. with 5mm thick

transparent bronze colour tinted float glass with powder coated

alluminium fittings & fixtures and transperent silicon sealent

glass fixing to frame as per details etc. Complete for Window.

9 45.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (B) Plain Grills.

10 2.00 Applying Priming Coat on new steel and other metal surface by

Smt. throughly cleaning, oil, grease and scoured with brushes fine

steel wood, scrapers and sand paper with ready mixed priming

paint brushing red lead and Painting two coats with synthetic

enamel paint, brushing to give an even shade including cleaning

the surface of all dirt, dust and other foreign matter. 105.49 Smt.

11 51.00 Providing 15mm thick cement plaster in single coat on

Smt. brick/concrete wall for interior plastering and finished even and

smooth in cement mortar 1:4 (1 cement : 4 sand) and finishing

with a floating coat of neat cement slurry upto floor two level.

12 25.00 Providing 10mm thick cement plaster in single coat on ceilings

Smt. and soffits of stairs for interior plastering and finished even and

smooth in. Cement Mortar 1:4 ( 1 Cement : 4 Sand) and finishing

with a floating coat of neat cement slurry for all floors.

13 74.00 Providing 20 mm thick double coat mala cement plaster on

Smt. interior brick/ concrete work for plastering comprising of base

coat of 12 mm thick cement plaster in cement mortar (1 Cement

: 4 coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 ( 1 Cement : 2 coarse sand) finished with

trovel including scaffolding curing etc. complete. Do for Texture

14 76.00 Applying two coats of putty & two coats of primer of approved

Smt. brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

SBD SECTION-7 BILL OF QUANTITIES-457

15 51.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer

coat with alkali resistance primer of approved brand after

throughly brushing the surface free from other foreign matter and

also including preparing the surface even and sand papered

16 25.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on

Ceiling & Sloping Roof surfaces to give and even shade over

and including a primer coat with alkali resistance primer of

approved brand after throughly brushing the surface to give and

free from other foreign matter and also including preparing the

surface even and sand papered smooth.

17 74.00 Finishing wall with weather proof exterior emulsion paint on wall

Smt. surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains

of loose powdered materials.etc complete

18 37.00 Providing and Applying Textured Plaster of approved

Smt. design/sample with all kinds of material, labor, taxation charges.

Complete. As directed on site by EIC or any concern authority.

19 24.00 Providing and laying 24" x 24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:6 (1

Cement : 6 Coarse Sand) and jointed with colour cement slurry

including finished with flush pointing and cleaning the surface

etc. complete. For Flooring.

20 2.00 Providing and laying 24"x24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:3 (1

Cement : 3 Coarse Sand) and jointed with colour cement slurry

including finished with flush pointing and cleaning the surface

etc. complete. For Skirting. 1467.72 Smt

21 2.00 Providing and laying polished Granite tiles 18 mm thick in risers

Smt of steps, skirting Dedo and pillars laid on 10 mm thick cement

mortar 1 : 3 (1 cement : 3 course sand) and jointed with gray

cement slurry mixed with pigment to match the shade of slab

including rubbing, polishing, Moulding etc. complete. For

Flooring, Doors & Windows Edges.

SBD SECTION-7 BILL OF QUANTITIES-458

22 28.00 Providing and Laying Broken China Mosaic flooring for Terrace

Smt using 12mm Broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar

cream out up to surface using white cement including rounding

off junctions and extending them up to 15cm long the wall,

clearing with water and oxailic acid etc. as directed.

SBD SECTION-7 BILL OF QUANTITIES-459

KHAMBHAT MUNICIPALITY KHAMBHAT

CONSTRUCTION OF PLUMBING & SANITARY AT MUNICIPALITY BUILDING, AT KHAMBHAT.

(PLUMBING AND SANITARY)

Item Qty. Description Total Per Amount

1 15.00 Providing and fixing wash down water closet (European type

Nos. W.C. Pan) with internal P or S trap including jointing the trap

with soil pipe in cement mortar 1:1 ( 1 cement : 1 fine sand).

Rates including providing and fixing plastic seat cover with

C.P. brass hinges and rubber buffers, Jet spray heavy duty

with S.S. braided hose 60 cm long and chromium plates

brass half turn flush cock of approved quality etc. complete

2 40.00 Providing and fixing 15mm. Dia Chromium Plated Brass

Nos. screw down bib tap of approved quality in pipeline and

testing etc. complete as directed by Engineer-in-charge.

3 15.00 Providing and fixing gun metal check or non return fullway

Nos. wheel valve of 25 mm Dia. 420.63 No.

4 15.00 Providing and fixing gun metal check or non return fullway

Nos. wheel valve of 40 mm Dia. 663.43 No.

5 40.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

Nos. 100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged

grating including the cost of cutting and making good the

6 30.00 Providing and fixing S.W. gully trap with C.I. grating brick

Nos. masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps. (A) 100mm x 100mm size P type.

SBD SECTION-7 BILL OF QUANTITIES-460

7 6.00 Constructing brick masonry chamber for underground C.I.

Nos. Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

8 4000.00 Providing erecting and fixing double coated ISI mark water

Lits. tank of required capacity with all necessary fittings &

connection etc. complete on terrace

9 20.00 Providing and fixing white viterous china flat back wash basin

Nos. of 550mm x 400mm size with single hole for pillar tape with

C.I. or M.S. brackets painted white including cutting holes

and making good the same. Rates including providing and

fixing 32mm dia C.P. Brass waste couplin, 32mm dia M.I.

Fisher unit, Brass screw down stop tap of 15mm dia pillar tap

capstan head, screw down high pressure with screws,

shanks, back nuts, PVC pipe & 32mm dia flexible waste pipe

up to Nani Trap etc. complete as directed by engineer in

charge. 2188.67 No.

10 50.00 Providing and laying (To level or slopes) and jointing with stiff

Rmt. mixture of cement mortar in proportion 1:1 salt glazed stone

ware pipes including testing of pipes and joint complete. (B)

11 8.00 Providing and fixing 600 mm x 450 mm bevelled edge mirror

Nos. of superior glass mounted on 6 mm thick A.C Sheets or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and wasers.

12 60.00 Providing and fixing concealed center point to wall ceiling &

Rmt. floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for portable water of following dia.

Nominal bore tube fitting and clamps including making good

the wall, ceiling and floor etc. complete. For 40mm Dia.

SBD SECTION-7 BILL OF QUANTITIES-461

13 75.00 Providing and fixing concealed center point to wall ceiling &

Rmt. floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for portable water of following dia.

Nominal bore tube fitting and clamps including making good

the wall, ceiling and floor etc. complete for 25mm.

14 50.00 Providing and fixing concealed center point to wall ceiling &

Rmt. floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for portable water of following dia.

Nominal bore tube fitting and clamps including making good

the wall, ceiling and floor etc. complete for 15mm dia

15 60.00 Providing and Fixing to wall ceiling and floor 110 mm Dia

Rmt. 6.kg. F/Cm2 working Pressure polythene pipes of the

following outside Dia. Low density, complete with special

flange compression type fitting, wall clips etc. including

making good the wall ceiling and floor.

16 80.00 Providing, laying and jointing in true line and level

Rmt. diameter U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length

x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including

cost of all materials.

17 9.00 Providing and fixing Urinal of approved quality including

Each connection with trap and with integral longitudinal flush

pipe.(A) Squating plate pattern white earthenware 550mm x

18 5.00 Providing and fixing washbasin with single hole for pillar tap

Each with C.I. or M.S. brackets painted white including sutting

holes and making good the same but excluding fittings.(A)

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

SBD SECTION-7 BILL OF QUANTITIES-462

KHAMBHAT NAGARPALIKA KHAMBHAT

CONSTRUCTION OF PAVER BLOCK AT MUNICIPALITY BUILDING, AT KHAMBHAT.

Item Qty. Description Total Unit Amount

1 60.00 Box Cutting the Road Surface to proper slope and camber for

Cmt. making a base for road work including removing the

excavated stuff and dipositing to road slope as directed all

lead and lift etc. complete upto 50 mt. Lead

2 60.00 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt Coarse sand, 8 Crushed stone agreegate 40 mm nominal)

and curing complete excluding cost of formwork in foundation

and plinth. (more than 10 ton)

3 400.00 Providing and fixing pre-cast Rubber Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300

pnumatic compressed / Vibrated mechanically as per

approved design confirming to IS 15658 : 2006 including

35mm sand layer for levelling and filling the joint with sand in

proper line and level etc complete as per guidelines of IRC :

4 1600.00 Providing cement vata (10cm.x10cm.size) quarter round in

Rmt cement mortar 1:1 including neat cement finishing, watering

Add :- 18% GST Rs.

Add :- 2% of Contingency Charges Rs.

Add :- 1% of Qaulity Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-463

KHAMBHAT MUNICIPALITY, KHAMBHAT

CONSTRUCTION OF COMPUND WALL AND ENTRANCE M.S. GATE

Item Qty. Description Total Unit Amount

1 227.00 Excavation for foundation up to 1:5 mt. Depth including

Cmt. sorting out and stacking of useful materials and

depositing of the excavated stuff up to 50 meter lead. 117.08 Cmt.

2 42.00 Excavation for foundation from depth 1:5 mt. to 3.0 mt.

Cmt. Depth including sorting out and stacking of useful materials

and depositing of the excavated stuff up to 50 meter lead.

(a) Loose or soft soil. 129.81 Cmt.

3 189.00 Filing available excavated earth (excluding rock) in trenches

Cmt. plinth sides of foundations etc. in layers not exceeding 20cm.

In depth consolidating each deposited layer by remming and

watering. 130.39 Cmt.

4 25.00 Providing and laying cement concrete 1:4:8 (1-Cement : 4-fine

Cmt. sand : 8-graded birck aggregates 40 mm nominal size) and

curing complete excluding cost of form work in (a) Foundation

and plinth. 2660.45 Cmt.

5 40.00 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

Column footings. 4775.28 Cmt.

6 6.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork But Excluding

the cost of reinforcement for reinforced concrete work in

Column upto Plinth Level having any cross section area.

7 6.00 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

Columns having any cross section area upto floor two level.

8 9.50 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in

Ground Beam having any cross section area. 6228.67 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-464

9 6.50 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork and excluding

the cost of reinforcement of reinforced concrete work in

6850.00 Providing and supplying TMT Fe-500 bar steel reinforcment for

Kgs. R.C.C work including bending, binding and placing in position

11 62.00 Brick work using common burnt building bricks having crushing

Cmt. strngth not less than 35 Kg./cm2 in super structure for Ground

Floor in C.M. (1:6) (1 Cement, 6 fine sand) racking out joints

curring etc. complete directed by Engineer-in-charge.

12 210.00 20 mm thick sand faced cement plaster on walls up to heinht

Smt 10 metres above ground laval cosisting of 12 mm thick backing

coat of C:M 1:3 (1-cement :3-sand) and 8mm thick finishing

coat of C:M 1:1 (1-cement :1-sand) etc complete.

13 210.00 Finishing wall with water proof exterior emulsion apex paint of

Smt on wall surfaces (two coats) to give an approved brand and

manufacture and of required slope evan shade after throughly

brushing the surface to remove all dirt and remains of loose

powered materials. etc completed.

14 3380.00 Providing and fixing M.S. grills of required pattern to wooden

Kgs. frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts

and nuts or by screws (A) Plain Grill.

15 46.00 Painting two coats (Including Priming Coat) on new steel and

Smt. other metal surface with synthetic enamel paint, brushing to

give an even shade including cleaning the surface of all dirt,

dust and other foreign matter.

SBD SECTION-7 BILL OF QUANTITIES-465

KHAMBHAT MUNICIPALITY KHMBHAT

Construction Work Of Proposed Passanger Lift At Municipality Building At Khambhat.

SR REF. NO. DESCRIPTION QTY UNIT RATE AMOUNT

GENERAL DESCRIPTION OF LIFTS,13-1

1 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF,

vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down

Contactor with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with

safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S.

finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with choice of

colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door

safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail

language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening

made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided. Also,

Emergency Light & Fan should start immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided inside

the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light beams shall be provided.[8] Automatic Rescue

Device (ARD) shall be provided accordingly of passenger capacity with Manual Rescue Operation ( Manual

Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be provided such that doors kept open till

excess load is removed.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided

by the lift agency, along with the other steel structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed by

engineer in charge.

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage

protection and THD eliminator in circuit for lift machine room and lift well with proper numbers of light points,

with fixtures, exhaust fan and plug points shall be provided by the agency. Only 3 phase Power Supply shall be

made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of

lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door openings are

not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities.

[20] acrylic transparent licence/display A4 size holder in lift car

SBD SECTION-7 BILL OF QUANTITIES-466

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor. 4.carrying

out third party lift inspection during/after lift erection and provide report by third party authorized by concern

licensing authority 5.agency has to

provide third party insurance upto completion of free maintenance period and submit the document for the

[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible

when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall Panels in Lift Car.

13-1-S 8/10 Passengers, Ground plus 3 upper floors with Rated Speed of 1.0 1.00 Each 1335269.49

m/sec.,(B) With General Specification attached herewith. Cat.II

2 13-2-1. Supplying & erecting approved make Lift Announcing solid state system 1.00 Each 17119.50

in the Passenger/ Stretcher lifts having AC2/ACVV/ACVF drives &

automatic doors only. The system comprising following features &

(i) Announcing floor message, message to close period.(ii) Announcing

‘Emergency Message’ when lift is stuck between floors due to power

failure or any other reason.

(iii) Instrumental Music between floor announcing.(iv) Announcement in

English / Hindi & Gujarati Languages..

(v) Flexible to accommodate special per-programmed message such as

name of the building /office.(vi)Volume adjustment control

3 13-2-2. Providing & erecting approved make overload non-start feature & 1.00 Each 32527.05

overload warning Indicator system in the lift with making use of sound

isolated floating platform & micro switches on SI frame to get sensation

of live load inside lift cage at any given moment, with provides new

fixtures of overload warning inside lift cage with new relay in the

existing control panel to activate ‘Overload Non-Start Function with

carrying out additional wiring including laying of new travelling cable,

include minor civil work & without changing the existing capacity speed

stops, travel & operation of the desired lift

SBD SECTION-7 BILL OF QUANTITIES-467

KHAMBHAT MUNICIPALITY KHAMBHAT

PROVIDING GENERAL TYPE RAIN WATER HARVESTING SYSTEM IN MUNICIPALITY

BUILDING ,AT KHAMBHAT.

GENERAL SUMMARY

No. Description Amount

SCH-B 10.1 General Type Rain Water Harvesting System Rs.

SCH-B 10.2 Drilling of Deep Tube Well Rs.

SCH-B 10.3 Pumping Machinery for borewell Rs.

SBD SECTION-7 BILL OF QUANTITIES-468

KHAMBHAT MUNICIPALITY KHAMBHAT

PROVIDING GENERAL TYPE RAIN WATER HARVESTING SYSTEM IN MUNICIPALITY BUILDING ,AT

Item Qty. Description Total Unit Amount

1 6.50 Excavation for pipe line trenches for water supply,

Cmt. sewerage line, manhole, etc. all with shoring and struting

if required as per required gradient and line including

safety provisions using site rails and stacking excavated

stuff including up to all required lead cleaning the site etc.

complete for all lifts and strata as specified in (A) Soft

Soils and Soft Murrum 0 to 1.5m

2 1.00 Providing and casting in situ mass cement concrete in

Cmt. grade M - 10 (approx. corresp. To prop. 1:3:6) using

granite quartzite trap metal of size 12mm to 25mm incl.

consolidation curing with form work etc. complete.

3 6.50 Providing and Laying brick work using common burnt clay

Cmt. building bricks (Conventional)having crushing strength

not less than 35 Kg./Sq.Cm in foundation and plinth in

Cement Mortar. (1:6) (1 Cement : 6 fine sand)-

(A)Conventional.

4 30.00 Providing & supplying ISI standard NP3 class R.C.C.

Rmt. Pipes (of sulphate resisting Cement) in standard lengths

of following class and diameter suitable for either collar

joints or rubbing ring joints including all taxes, insurance,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyence to departmental stores,

stacking etc. complete including lowering, laying &

jointing of RCC pipes in C:M 1:1.5 in position, grade

alignment as directed by engineer in charge including

conveyence from stores to site of work, labour, giving

hydraulic testing as per ISI code - 250mm dia NP3

SBD SECTION-7 BILL OF QUANTITIES-469

5 30.00 Providing, Supplying, Lowering and Laying in standard

Rmt. length ISI mark rigid unplasticised PVC pipes suitable for

potable water with ring fit joint including cost of rings, as

per IS Specification no. 4985/1988 including all local and

central taxes, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

the departmental stores and including cost of jointing

material etc. complete.75 MM 110.41 Rmt.

6 1.00 Testing of Recharge Pit by emptying a tanker of 8000 L

Nos. and measuring the time as per the specifications and

reporting of the same 707.00 Nos.

7 5.00 Filling in foundation and plinth with murrum or selected

Cmt. soil in layers of 20cm. Thickness including watering,

ramming and consolidating etc. complete (Upto 10 ton)

8 3.00 Providing and fixing pre-cast Rubber Dye inter locking

Smt. concrete block 60mm thick with grade of concrete M300

pnumatic compressed / Vibrated mechanically as per

approved design confirming to IS 15658 : 2006 including

35mm sand layer for levelling and filling the joint with

sand in proper line and level etc complete as per

guidelines of IRC : SP 63 - 2018. 706.93 Smt

SBD SECTION-7 BILL OF QUANTITIES-470

9 1.00 For Genreal Area :- Horizontal Filtration Module is

Nos. Precast Modular Step well of M25 grade, designed to

capture sediments primarily from surface runoff water.

This Octagonal shape structure has a circumscribing

diameter of approximately 918mm and a height of

1614mm. A part of the top module of is usually kept

above the ground however same can be flushed with

ground.100 / 150 mm are the available height options in

case part of it has to be kept above the ground level. Top

module accommodates indigenously designed 2-nos

Array Filters to capture sediment effectively within the

Horizontal Filtration Module. This easily removable array

filters can be cleaned within or outside the module using

pressurized water. Total filtration area of thisfilter is

approximately 3000 cm2. Filtration capacity is 8m3 to

10m3 per hour. These module is installed prior to the

Sand Filtration Module.The inlet and outlet of is 110mm

diameter UPVC pipes connected with Sand Filtration

Module. 104030.00 Nos.

10 1.00 For Genreal Area :- Sand Filtration Module M-25 grade

Nos. cement concrete system for rainwater harvesting with SS

304 screen and natural filters. It consists of single module

with internal volume of approximately 0.8 cubic metres

that is to be fixed below ground level. The module is of an

octagonal shape with a diameter of approximately

mm below ground level. Total height of the system is

1614 mm. Filtration capacity & testing upto 8m3 to 10m3

per hour from modular systems only.The inlet and outlet

of the system is 90mm diameter UPVC pipes. Module

holds a filter media in the form of sand bed around a

continuous slot fine aperture stainless screen (420 mm

diameter and 240 or 300 mm length). Screen is fixed to

the bottom slab and is fully covered by 0.10 cubic meter

filtration sand with 40mm graded gravels. Screen creates

entry points for the filtered water. This module is used for

Surface water and the filtered water to get into is finally

connected with the Recharge well.

SBD SECTION-7 BILL OF QUANTITIES-471

11 1 Submission and approval of survey, Hydrogeological

Job investigations at number of locations in Dahod City,

working Drawings including all layout sections, typical

details, shop drawings, As‐built drawings and submission

of working drawings and implementation schedule as per

priority given by Engineer‐In‐Charge for approval, etc.

complete. Including 1) Detailed VLF profiling Survey work

in a grid pattern2) Detailed Geophysical Resistivity Test

&sub-surface micro-level VES Investigation work

SelectedVLF anomalous point for pinpointing the most

feasible location for Recharge& Roof Top Rain

waterrecharge to be constructed in premises .3) G.P.S

marking of each location by G.P.S. instrument4)

Preparation & Submission of its completely detailed draft

report showing recharge potential in theprescribed area

along with their interpretations specification & designs

feasiblelocation,Physiography,drainage,Geological,Hydrol

ogical,Climate month wise details ,rainfalldata of last

years with drilling location,lithological cross section &

submit its final reportMETHODS OF INVESTIGATION :-

(1) Geophysical Investigation Method using

Schlumberger configuration by Resistivity meter Model

No SSR-MPL-1 Micro-processor(2) VLF instrument(3)

Remote Sensing Method.(4) Geo-Electrical Resistivity

Method by newly developed latest IXID software for more

accuracy.(5) Geohydrological Micro-level Investigation.

12 1.00 Jobwork for cleaning of modules for every Premonsoon

Job. for once in years with inbuilt intergral ladder at 1125mm

with safety by water cleaning system ,labours , hand

bucket , lari & other tools i.e. Trikam , Pavda , Rassa

Battery , G.T. Salia etc.with disposing silt as shown

places. Nothing extra to be paid for any insurance or

depriciation of tools etc. 16160.00 Job.

13 12.90 Providing, fixing and fabricating of G.I. Chain Link Jali

Smt. Gauge Fencing with necessary fittings and having angle

support of 50x50x6 mm thick and c/c. distance

between two column with loading, unloading, lead and lift.

Including all labour and fitting work. 1219.07 Smt.

SBD SECTION-7 BILL OF QUANTITIES-472

KHAMBHAT MUNICIPALITY KHAMBHAT

Drilling of 250 mm dia X 60 meters deep bore by DR rig.

Item Qty. Description Total Per Amount

1 60.00 Drilling pilot bore hole of size 250 / 300 mm atabove

Mtr village site in all starata by mud flush direct rotary rig

2 60.00 Reaming of 250 / 300 mm dia pilot bore hole to size

Mtr 550 mm dia.including assembling,jointing,lowering of

housing casing screen pipes & other assembly items

with gravel packing and clay balls packing etc

3 1.00 Development of bore by air compressor of 600 cfm /150

LS psi capacity for minimum 06 hours or up to the

availability of sand free discharge

4.A 42.00 Supply of 200 mm dia PVC casing pipe 'CM' type

Mtr 1458.44 Mtr

4.B 18.00 Supply of 200 mm dia.UPVC casing pipe 'CM' type with

Mtr slotting. 1458.44 Mtr

(II) Size: 1.0 mm Regular

5 1.00 Bore clamps made from MS plate with 03 holes on

Pair either side with nuts & bolts of standard make & size

900 mm x100 mmx16 mm suitable to 250 mm dia.Pipe

6 1.00 Supply of Bore plug having 100 mm height made from

No. M.S. Plate with 3 hole sate qual distance on

circumference for nut-bolts type,locking arrangement

with nut-bolts & lock nuts of std. Make complete from

thick M.S.Plate(For Tap also) suitable for 200 mm dia

7 1.00 Supply of Bail plug UPVC of standard make suitable for

No 200 mm dia pipe. 830.27 No.

SBD SECTION-7 BILL OF QUANTITIES-473

8 6.50 Supply of gravels of selected size 4 mm to 6 mm

Cmt. 2049.29 Cmt.

9 1.00 Electrologging of pilot bore

Job 12120.00 Job

10 1.00 Geohydrological ground water investigation charges

11 2.00 Water sample chemical analysis charges.

SBD SECTION-7 BILL OF QUANTITIES-474

KHAMBHAT MUNICIPALITY KHAMBHAT

Pumping Machinery For Borewell

DESCRIPTION QTY. UNIT Total AMOUNT

Providing submersible pump setc onfirming to IS 9283 working at

phase , 400 / 440 volt , 50 cs / sec AC supply & 2900 RPM , category

8.0 with discharge : 800 LPM @ 72.0 Mtr head with 25.0 HP including

Providing21-30 HP ATS starter suitable for local & remote pump control

application consisting of MPCB , over load relay and contactors as per

type II coordinatio nincluding digital voltmeter , analogue ammeter with

selector switch , run hour meter , required protectiv erelays & control

acessories including GST.

Providing flat PVC copper submersible cable confirmaing to IS 694

Providing heavy duty UPVC Column pipe as per IS - 1239 with

couplings , threaded at both ends of size 80 mm dia. 39.00 Mtr 403.66

Lowering of submersible pump set complete with required no sandsize

of column pipe erected by means of proper chain pulley block and pipe

wrenches after checking of threads of each pipe and coupling to take

the load of the pump set and pipe assembly filled with water up to

mtrs. 1.00 Job 707.00

Providing & fitting pipe type earthing having 150 cm long and 25 mm dia

G I pipe with coupling & buch burried in specially prepared earth pit

complete with necessary 8 SWG G I earth wire inclduing using charcoal

/ coke and salt in required quantity. 1.00 Job 994.85

Supply & installation of ISI mark C I double flanged hand wheel / cap

operated sluice valve (PD type short body ) confirming to IS 14846 of

PN 1.0 of 80 mm dia. Size & for supply, 1.00 Job 3509.80

Supply & installation of non slam design CI dobule flanged single door

wing type non return / reflux valve confirming to IS 5312 of PN 1.0 of

mm size as per specifications Supply as per

SBD SECTION-7 BILL OF QUANTITIES-475

Providing & fitting M.S. clamps fabricated from M.S. plate with 03 holes

on either side with nuts & bolts of standard make and suitable size of

450 mm x 65 mm x 10 mm flat suitable to 80 mm dia M S / Gipipe 2.00 Pair 654.47

Approved make ELCB / RCCB conforming to IS 12640 and having

sensitivity of 30 mA and short circuit with stand capacity of 6 KA and

suitable for operation on three phase and neutral 415 V having

characteristic of quick action and tripping with all advance features and

do not incoroporate any electronic component for following maximum

rating 1.00 No. 2637.11

40 Amps FP Cat I

SBD SECTION-7 BILL OF QUANTITIES-476

KHAMBHAT MUNICIPALITY,KHAMBHAT

CONSTRUCTION OF PROPOSED FLAG POLE , AT KHAMBHAT.

Item Qty Description Total Unit Amount

1 4.88 Excavation for base footings upto depth 1.5 m. including

Cmt. sorting out and disposing of the excavated material upto

m lead (loose or soft soil)

2 2.38 Filling available excavated earth (excluding Rock) in

Cmt. trenches. Plinth, sides of foundations etc. in layers not

exceeding 20cm. In depth consolidating each disposited

layer by ramming and watering.

3 0.71 Providing and laying cement concrete 1:3:6 (1 Cement :

Cmt. coarse sand : 6 Crushed stone aggregates 20 mm nominal

size) and curing complete excluding cost of form work in (A)

Foundation and plinth.

4 1.25Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

5 1.32 Providing and laying controlled cement concrete M.200 and

Cmt. curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass concrete

6 169.50 T.M.T. Bars

Kg. Providing ISI Mark TMT Bar Fe-500 Reinforcment for

R.C.C work including bending, binding and placing in

position etc. complete for all Floors. 77.29 Kg.

SBD SECTION-7 BILL OF QUANTITIES-477

7 6.00 Providing 15mm thick cement plaster in single coat on

Smt. Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand) Extra

over items 58 to 64 for finishing with a floating coat of neat

8 6.50 Providing and laying polished Granite tiles 18 mm thick in

Smt. risers of steps, skirting Dedo and pillars laid on 10 mm thick

cement mortar 1 : 3 (1 cement : 3 course sand) and jointed

with gray cement slurry mixed with pigment to match the

shade of slab including rubbing, polishing, Moulding etc.

complete. For Flooring, Doors & Windows Edges.

9 1.00 providimg and fixing falg hosting pole made out of minimum

Nos dia of 4" hollow pipe with minimum height of 7.60 meter

above garound level and anchor in ground at appropriate

deptha of minimum and labour and traansport charges ets

complete as directed by engineer in charged

10 1.00 India National Flag 20' X 30' Giant Indian National Flag of

Ea size 20' X 30' in 100 % Knitted Polyester, With reinforced

super-strong nylon webbing on all 3 sides & eyelets.

SBD SECTION-7 BILL OF QUANTITIES-478

KHAMBHAT MUNICIPALITY, KHAMBHAT

ESTIMATE FOR PROPOSED GARDENING, HOLTICULTURAL & PLANTATION WORK AT KHAMBHAT

Sr No Item Description Qty Unit Rate Total Amount

Sr No Item Description Qty Unit Rate Total Amount

Development of lawn including excavation of area up to 150 to

200 mm depth as per requirement and disposal of same

outside premises, removing of weeds, cleaning, spreading

garden soil, organic fertilizer and mixing same, applying anti

termite insecticides, supplying and laying of carpet lawn,

1 watering. And maintain up to two month.(supplying of required 278.00 Smt 450.00

quantity of carpet lawn shall be in the scope of

contractor).(With Two Years of Maintenance including

Replacement of Damage Plant, lawn Etc With Required

insecticides, pesticides, Fertilizer etc Complete as Directed By

Development of shrubs and flower bed at the location directed

by officer in charge including required pit size up to 2*2*2 feet

as per required disposal of same out sidepremises ,removing

of weed cleaning , filling garden soil ,organic fertilizer mixing

the same applying anti termite treatment and planting plants

as required ,watering and maintaining the fiower beds for

period of two months.(supply required quantity of plants and

shrubs shall be in scope of contractor).variety of shrubs as per

index. (With Two Years of Maintenance including Replacement

of Damage Plant, lawn Etc With Required insecticides,

pesticides, Fertilizer etc Complete as Directed By EIC.)

Plantation of various hedge plants, saplings including

excavation trench of 9 inch depth an width, filling with garden

soil and organic fertilizer, applying anti termite insecticides as

required, plantation of different variety hedge plants at distance

of 8 inch to 2 feet between plants (supply of required hedge

plants and sapling shall be in the scope of contractor). (With

Two Years of Maintanance including Replacement of Damage

Plant,laWN Etc With Required insectisides, pestisides,

Fertilizer etc Complete as Directed By EIC.)

Supply and plantation of palm and exotic plants and focus

variety for including 2*2*2 pit filling with garden soil, mix with

organic fertilizer and termite pesticides ,watering and maintain

up to two months.(supply of require quantity of palm, exotic

4 plants and focus variety in the scope of contractor).plants list 15.00 Nos 2000.00

as per Index (With Two Years of Maintenance including

Replacement of Damage Plant, lawn Etc With Required

insecticides, pesticides, Fertilizer etc Complete as Directed By

Supply and plantation of trees at various garden and places

including 2*2*2 pit filling with garden soil, mix with organic

fertilizer and termite pesticides, watering and maintain up to

two months (supply of require quantity of trees in the scope of

contractor). Trees lists as per index(Bamboo) (With Two Years

of Maintenance including Replacement of Damage Plant, lawn

Etc With Required insecticides, pesticides, Fertilizer etc

Complete as Directed By EIC.).

SBD SECTION-7 BILL OF QUANTITIES-479

SBD SECTION-7 BILL OF QUANTITIES-480

BALASINOR MUNICIPALITY BALASINOR

Electrification Work

Sr No. Description Qty Unit Total Rate Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length

, in below type of pipe erected with 6A Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules erected on / in wall

/ ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires, in below type of pipe to be erected complete with earth continuity and

necessary connection with primary light with accessories erected on Metal / PVC / wooden

box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring.

with necessary Lamp holder / ceiling rose / H.D.Connector as directed. Note:- Maximum up

to 6 mtrs length, excess will be considered as Mains for Secondary Point. (f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

4 below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

SBD SECTION-7 BILL OF QUANTITIES-480

Sr No. Description Qty Unit Total Rate Amount

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board (f) with medium class Rigid PVC pipe and accessories erected concealed in 86.00 Pt. 510.05

wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

4.1 (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling 29.00 Pt. 745.38

complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected

on PVC / Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling with following type

accessories Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires erected in below type of pipe with 6A Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete CAT. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(1)One No. SP 6 Amp. Cat.III 38.00 Ea. 151.50

7.1 (2) One No 5 pin plug Cat.III 76.00 Ea. 151.50

7.2 (3) Two Pin/RJ-11 [A] For One Gang Telephone Socket Cat.III 26.00 Ea. 160.59

7.3 (4) TV Co-axial Socket outlet Cat.III 4.00 Ea. 160.59

7.4 (8) Computer RJ-45 socket Cat.III 38.00 Ea. 160.59

7.5 (7) Blank Plate Single Cat.III 5.00 Ea. 25.25

7.6 (9) 16 Amp. SP one way switch Cat.III 5.00 Ea. 180.79

7.7 (10) 6/16Amp. Universal socket Cat.III 5.00 Ea. 199.98

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to

8 be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed 2750.00 Mtr. 33.33

with adhesive solution & Clamps with following dia of pipes, in approved manner as

directed (b) 25 mm

SBD SECTION-7 BILL OF QUANTITIES-481

Sr No. Description Qty Unit Total Rate Amount

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

9 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) With medium class Rigid PVC pipe and

(a) 2 wire 1.5 sq. mm 1750.00 Mtr. 62.62

Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or Heavy duty PVC

10 box erected flushed on wall or concealed in wall with necessary plastering & finishing as 4.00 No. 76.76

directed of following size. (b) 175 mm x 100 mm x 75 mm(d)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

11 IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used

of same company of MCB to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door

Providing & erecting Switch board for Computer or electric apparatus consisting of

following modular type accessories mounted with PVC / Metallic concealed/open box with

single mounting base frame covered with textured/metallic /white front plate,modules

12 erected with necessary connections as directed 38.00 Ea 1133.22

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories

Supplying & erecting approved make LAN cable of following size in existing pipe as per

direction [C] CAT -

Supplying & erecting Approved make call bell indicator with buzzing sound and Red light

14 indicating lamp with Red light button to attend the call suitable for 240 v 50 c/s supply to 10.00 No. 148.47

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC

15 or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing 450.00 Mtr. 20.20

pipe. of following size of conductors & nos.of pairs. With necessary connections. [A]

Conductor Size 0.5 mm (2) Two Pairs

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having

portable bell push working on D.C. & bell on 230V A.C. supply with cells / battery

SBD SECTION-7 BILL OF QUANTITIES-482

Sr No. Description Qty Unit Total Rate Amount

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on

17 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. 162.00 Ea 112.11

confirming to IS 8828/1996 with ISI Mark

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity

(a) 6 to 32 Amp. Cat.III 13.00 Ea 595.90

18.1 (b)40 Amp. Cat.III 10.00 Ea 668.62

18.2 (c)63 Amp. Cat.III 11.00 Ea 737.30

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component. for following Max. rating erected as directed

(i) 25 Amps.DP Cat. III 15.00 Ea 1969.50

19.1 (ii) 40Amps. DP Cat. III 12.00 Ea 2235.13

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel

20 duly powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals 8.00 Ea 446.42

for following type of RCCB, RCCB + MCB [b] For 4 Pole

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on

21 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all 8.00 Ea 2834.06

advance feature & do not incorporate any electronic component for following Max. rating

erected as directed. [f] 63A, 4 pole Three Phase Cat. II

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars

with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary bus bar supports /insulators,

main cable socket to each busbar,erected in existing cubical panel with necessary

connections. (D) Suitable for 400 Amp. Capacity

Providing and erecting required size Aluminium strip for earthing of H.T. , OCB / ACB /

Transformer, LT panel board, Motors etc. using copper clamp.

SBD SECTION-7 BILL OF QUANTITIES-483

Sr No. Description Qty Unit Total Rate Amount

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having

25 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 2.00 Ea. 647.41

(b)40 Amp. Cat.III

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

26 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe

of following size of cables

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 25.00 Mtr. 284.82

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper

27 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 350.00 Mtr. 510.05

at road crossing or floor of following size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper

28 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 750.00 Mtr. 676.70

at road crossing or floor of following size of cables. (A) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

29 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing 150.00 Mtr. 126.25

trench / pipe of following size of cables (B) 4 core 6 Sq. mm

SBD SECTION-7 BILL OF QUANTITIES-484

Sr No. Description Qty Unit Total Rate Amount

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

30 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 35.00 Mtr. 540.35

of following size of cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the

fault all over the run and back filling the same and making the surface as normal ground.

Providing & laying approved make Double walled corrugated pipes (DWC) of

32 polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same 100.00 Mtr. 62.62

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable (A)50 mm outer dia

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling

fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

with remote unit for Speed Control and all remaining accessories including safety pin, nut

bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge]

(B) 1200 mm Sweep (48")

Supplying & erecting single phase approved make industrial exhaust fan suitable for

34 medium duty ring mounted low noise operation suitable for medium duty having following 12.00 Ea 2054.34

dia size and maximum speed in RPM [A] 305 mm dia 900 RPM

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod

35 erected duly painted for fan complete with proper insulation without leckage and 60.00 Ea 108.07

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC

36 bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / 60.00 Ea. 108.07

Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

SBD SECTION-7 BILL OF QUANTITIES-485

Sr No. Description Qty Unit Total Rate Amount

Supplying & erecting single phase approved make industrial exhaust fan suitable for

38 medium duty ring mounted low noise operation suitable for medium duty having 12.00 Ea 2054.34

following dia size and maximum speed in RPM

39 Providing suitable M.S. louver shutter of the Exhaust fan. 12.00 Ea 368.65

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by

CNC filament winding machine using thermoset resin polyester/epoxy resin system) having

minimum 62% glass content. The pole should be in one piece and tapered round in shape,

having smooth finish and should be totally free from corrosion as well as non conductive &

shock proof Pole should be provided with FRP Anchor Base and it should be heavy duty, or

MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and

pigmented. A highly weather resistant polyurethane coating shall be applied to the pole

after applying suitable primer system that ensures proper adhesion of the paint. Minimum

40 coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more 12.00 Ea 9792.96

than 10% of the length of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability features of poles as per

standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination box

with necessary accessories . The size of pole and type of installation with foundation as per

manufacturer details and site requirement are as below .

(1) Suitable for base plate mounting single arm Bracket. [D] Overall length of 4 Mtr. Average

Thickness: 7mm.

Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx. Weight of Pole 19 kg approx.

(Without Base) Anchor Base (Size 250X250 & 12mm th.)

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation

for the pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth of 45 cm x

41 cm (or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in 12.00 Ea 809.01

approved manner.

( for 4 & 6 mtr pole)

SBD SECTION-7 BILL OF QUANTITIES-486

Sr No. Description Qty Unit Total Rate Amount

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.

(A) Tube Light with integral driver

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

43 CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

(iv) 22-24 watts, Surge-2 KV Cat-lll 71.00 Ea 758.51

43.1 (ii) 11-15 watts, Surge-2 KV Cat-lll 39.00 Ea 427.23

43.2 (i) 5-9 watts,Surge-2 KV Cat-lll 16.00 Ea 220.18

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to

43.3 housing complete.IP20 51.00 Ea 2091.71

(vii) from 45 to 48 watts, 24" x 24", Surge-2 KV Cat-lll

SBD SECTION-7 BILL OF QUANTITIES-487

Sr No. Description Qty Unit Total Rate Amount

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79

& LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block.IP 65 (ii)32-40W Cat-lll

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated

indoor type cubical panel board necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG

thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/

flats channel including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring

45 instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of 5.00 Sq.Mtr 16392.30

hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The panel shall be supplied with

following approved manufacturers with following size. (C) The standard companies switch

gear shall be used and only manufacturers as per IEC 61439 for beneficial use. (i) with

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above at 415 V . having normal current rating 250A.

46 with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all 3.00 Ea. 20946.39

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

SBD SECTION-7 BILL OF QUANTITIES-488

Sr No. Description Qty Unit Total Rate Amount

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 50 KA and above at 415 V having Normal current rating 400A.

47 with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all 2.00 Ea. 25228.79

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

Providing & Erecting full SS Body (SS 304) Split type water cooler having storage capacity

160 to 175 Ltr.(Tank SS 304) & Cooling capacity 150 ltr. Per hour @ an ambient temp of

C.The outlet temp. of the water should drop by 150C within a hour,The water cooler should

be comprising of hermetically sealed Reciprocating compressor with R134A, fan motor,

48 Copper Condensing unit with company fabricated Outdoor Unit water tank surrounded by 2.00 Ea 61115.10

evaporating coil, thermostats, relay etc.complete with necessary copper tube & Insulation,

M.S Chanel Stand with Painting for water tank & M.S. Powder Coated Stand for Outdoor

unit with Installation.

With DPELCB and 4 Way DB Box with accessory Three core Cord for connection.

Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder

coated pedestal frame, prefilter housing carbon filter suitable buster DC pump, auto low &

high pressure switches with following size of LPH capacity & erected as directed [E]

49 LPH with 1 phase / 3 phase Raw water pump of 1000LPH @ 2.5kg/cm2 (1N0 - 2.00 Ea 15707.52

Kirloskar/CRI/Lubi) , Dual media filter 10"x54" (1 No), Micron catridge filter 20" x 2.5" -

(1No), High pressure pump 1000LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi) , RO

Membrane housing with RO membrane of 40*40 - ( 1 No),RO pressure tube 4" x 1E-(1No), 0-

1200LPH Rotameter-(2 Nos). Recovery Rate 50%.

Providing & erecting open well horizontal mono block pump set with cast iron body,

complete for three phase submersible motor having [C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head

suitable for 50/65 mm dia delivery pipe Cat-ll

[D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to

310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe

Supplying and erecting Direct - On - Line Starter with 18 A. rating contactor and with

51 Amp. 18A range directly operated in totally insulated elegant enclosure for single phase 2.00 Nos 2100.80

operation up to 3 HP as per IS 13947 complete erected on P.W. Block with necessary

connection. Cat-lll

Supplying & erecting approved make Automatic liquid level controller 6A. with sensor

52 testing as per instruction of Engineer in charge on site complete with wiring connection with 2.00 Nos 2355.32

existing wires , with copper conductor from pump to upper and lower tank.

SBD SECTION-7 BILL OF QUANTITIES-489

Sr No. Description Qty Unit Total Rate Amount

Providing and erecting Inverter based approved make split air-conditioning unit consisting

of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately erected evaporating unit and

53 blower motor with its accessories by means of extra supplied proper insulated copper 10.00 Nos 63765.34

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 15A

plug top & Remote Control & MS Stand) with necessary core cutting.(2) For 4/5 Star Rating

of current year, (C) for 1.7 to 2 ton capacity

GEB Connection Charge As per GEB Receipts - Agency will not claim extra charges for GEB

54 Connection. and Quoted Rate % Above & Below not Consider in this Charges 1.00 LS

Say Total Amount

Say Total Amount

SBD SECTION-7 BILL OF QUANTITIES-490

KHAMBHAT MUNICIPALITY, KHAMBHAT

PROVIDING SUPPLYING AND FIXING FURNITURE ITEMS KHAMBHAT MUNICIPAL BUILDING AT

Item Qty. Description Rate With Labour Unit Amount

1 26.00 Providing and supplying and arranging table Top

Nos. and side of overall thickness 38 mm made from

18 mm thick MR grade plywood with 1 mm thick

decorative laminate on exposed faces and

specified thick glass on top by EIC and 0.8 mm

thick laminates as liner with TW border patti .

legs to be made from 50mm x 50mmx 1.6 mm

thick CRC Square pipe and supporting pipe

50mm x 25mm x 1.6mm with 50 micron epoxy

powder coating with levelar.appron to be made

from 18mm thick MR grade plywood and finish

with 1mm thick laminate sheet on both side.

drawer unit 450 mm X 550 mm X 600 mm (3

Nos.) & storage unit 450 mm X 550 mm X

mm (H) having all structure 18 mm thick MR

grade plywood and finish with 1mm thick

decorative laminate on exposed faces and

mm thick balancing laminate as liner of specified

size drawer slides on ebco make telescopic

channel with locking arrangement the item

includes all materials, labour, taxes &

consumable etc.Complete as per drawing and

instruction of engineer-in charge . Size 0.90 mt. X

2 2.00 Providing and supplying and arranging modified

Nos. office table Top and side of overall thickness

mm made from 18 mm thick MR grade plywood

with 1 mm thick decorative laminate on exposed

side and 0.8 mm thick laminates as liner with TW

border patti appron to be made from 18mm thick

MR grade plywood and finish with 1mm thick

laminate sheet on both side. legs to be made

from 50mm x 50mmx 1.6 mm& other framing

work of 50mm x 25mm x 1.6mm size CRC MS

PIPE with 50 micron epoxy powder coating. the

item includes all materials, labour, taxes &

consumable etc.Complete as per drawing and

instruction of engineer-in charge . Size 0.90 mt. X

SBD SECTION-7 BILL OF QUANTITIES-491

3 15.00 Providing and supplying and arranging table Top

Nos. and side of overall thickness 38 mm made from

18 mm thick MR grade plywood with 1 mm thick

decorative laminate on exposed side and 0.8 mm

thick laminates as liner with TW border patti

appron to be made from 18mm thick MR grade

plywood and finish with 1mm thick laminate sheet

on both side. legs to be made from 50mm x

50mmx 1.6 mm& other framing work of 50mm x

25mm x 1.6mm size CRC MS PIPE with

micron epoxy powder coating. the item includes

all materials, labour, taxes & consumable

etc.Complete as per drawing and instruction of

engineer-in charge . Size 0.90 mt. X 1.80mt. X

4 40.00 Providing , supplying and placing fully glazed

Nos. openable door unit of size Width 890 x Depth

x Height 1980 mm having back, sides and door to

be made from 0.7 mm(+ or - 0.07mm )made up

with Durable cold-rolled steel plate construction

and Powder-coated to resist corrosion. and 4 mm

thick float plain glass door, lever cam lock , SS

handle to be provided & having 4 nos of

adjustable full shelves of uniformly distributed

load capacity of 40.00 kg and each shelf shall be

A4 size Box File ( 85 w x 345 H X 285 D ) & clear

space above 5ht shelf shall be 220 mm. Whole

unit shall be Epoxy polyster powder coated of

micron thickness. Overall Glass book Storage

size 890 mm X 520 mm X 1980 mm(H).

5 21.00 Providing & Supplying Wooden Cub Board for

Nos. File Storage of 1750 (L) X 450 (W) X 760 (H) mm

using 19mm thick WP plywood & 25 X 12, 50 X

12mm teak wood patti, formica, magnet, stopper,

handles, fixtures & fastenings, including cost of

all material & Labours, with one coat primer & two

coats Oil Painting inside etc., complete as per

detail approved drawing & as directed by the

Purchase Authority. 20000.00 Nos.

6 5.00 Provoding and supplying tea table made from

Nos. 37mm x 37 mm Indian teakwood leg and top fram

made from 37mmx 75mm Indian teakwood

having 18mm thick Ply and 4mm thick Veneer

with melamine polish on top and 0.8m thick

balancing laminate on bottom.All teakwood

surface to be melamine polish Including all

materials and labour ect.Complete as per

drawing and instruction of engineer-in charge.

overall size 900mm x 600mm x 450mm (H) 8000.00 Nos.

SBD SECTION-7 BILL OF QUANTITIES-492

7 112.00 Providing and supplying fix chair structure CRC

Nos. M.S. pipe of 20mm dia and 16 guage with

micron powder coating frame seat and back

density PU foam covered with fabric of approved

shade and texture ( MiNi-250 RS. Mtr.)with one

year replacement warranty.Wooden armrest as

per approved design.complete chair should be in

suitable shape Including all materials and labour

ect.Complete as per drawing and instruction of

engineer-in charge. 2800.00 Nos.

8 72.00 Supplying and Arranging Low Back Chair with

Nos. SEAT/BACK ASSEMBLY: The seat and back are

made up of 1.2 cm thick hot pressed plywood,

upholstered with fabric and moulded

Polyurethane foam. The complete back is

contoured to provide the needed lumbar support

for long seating hours. The seat is made up of

moulded foam, upholstered with fabric. Foam

density 45 +/- 5 kg/m3 and Hardness = 14+/-2 on

Hampden machine at 25% compression.

ARMRESTS: The Arm rest is injection moulded in

Polypropylene fitted to the seat base SYNCHRO

MECHANISM: The mechanism installed for this

chair is a Synchro-1 mechanism. This

mechanism provides you with the utmost comfort

while leaning backwards. There is a displacement

in the ratio of 1:3 between seat and back

respectively The Synchro mechanism is designed

with 360 Degree revolving feature, Tilt tension

adjustment and Upright locking. PNEUMATIC

HEIGHT ADJUSTMENT: The pneumatic height

adjustment has an adjustment stroke of 12 cm.

TELESCOPIC BELLOW ASSEMBLY: The bellow

is 3 piece telescopic type and injection moulded

in black Polypropylene. PEDESTAL ASSEMBLY:

The pedestal is made of nylon with glass

reinforcement and fitted with 5 nos. twin wheel

castors.(castor wheel día. 5.0cm.)

TWIN WHEEL CASTORS: The twin wheel

castors are injection moulded in 30% Glass Filled

black Nylon. Back size 44cm W X 47cm H

Seat Size 52 cm W X 48 cm D Effective back ht

47 cm. as per drawing / Photograph at site of

work as required & directed etc. complete.

9 2.00 Supplying and Arranging Medium Back Chair with

Nos. SEAT/BACK ASSEMBLY: The seat and back are

made up of 12 mm thick hot pressed plywood,

upholstered with fabric and moulded

Polyurethane foam. The complete back is

contoured to provide the needed lumbar support

for long seating hours. The seat is made up of

moulded foam, upholstered with fabric. Foam

density 45 +/- 5 kg/m3 and Hardness = 14+/-2 on

Hampden machine at 25% compression.

ARMRESTS: The Arm rest is injection moulded in

SBD SECTION-7 BILL OF QUANTITIES-493

Polypropylene fitted to the seat base. SYNCHRO

MECHANISM: The mechanism installed for this

chair is a Synchro-1 mechanism. This

mechanism provides you with the utmost comfort

while leaning backwards. There is a displacement

in the ratio of 1:3 between seat and back

respectively The Synchro mechanism is designed

with 360 Degree revolving feature, Tilt tension

adjustment and Upright locking.

PNEUMATIC HEIGHT ADJUSTMENT: The

pneumatic height adjustment has an adjustment

stroke of 12 cm. TELESCOPIC BELLOW

ASSEMBLY: The bellow is 3 piece telescopic

type and injection moulded in black

Polypropylene. PEDESTAL ASSEMBLY: The

pedestal is made of nylon with glass

reinforcement and fitted with 5 nos. twin wheel

castors.(castor wheel dia. 5.0cm.)

TWIN WHEEL CASTORS: The twin wheel

castors are injection moulded in 30% Glass Filled

black Nylon. Back size 49cm W X 63cmH Seat

Size 48 cm W X 47 cm D

Effective back ht 50cm. as per drawing /

Photograph at site of work as required & directed

10 14.00 Providing and supplying three seater wooden

Nos. sofa made of Indian teak wood with melamine

polish.seat made from 4 inch thick 40 desity foam

with 1" supersoft HD covered for softness.seat to

be capt on Heavy density naylon elastic

belt.inside Framing 2"x 1.6"support.Outer frame

3" x 1.6". Back 3" thick 40 density foam with

12mm supersoft HD coverd for softness seat and

back covered with high quality fabric (Basic Rate

: 400 RS/Rmt.)as approved shade.Including all

materials and labour ect.Complete as per

drawing and instruction of engineer-in charge.

overall size : 1900 mm X 750 mm X750 mm

11 35.00 Providing and erecting Inverter based approved

Nos. make split air-conditioning unit consisting of

condensing unit with variable speed fan motor,

inverter type hermetically sealed rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower

motor with its accessories by means of extra

supplied proper insulated copper tubing,drain

PVC pipes suitable for ( cost includes Eco

Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core

(2)For 4/5 Star Rating of current year

(B) for 1.5 ton capacity- Premium Cat. 58731.50 Nos.

SBD SECTION-7 BILL OF QUANTITIES-494

12 2.00 FULL HEIGHT OPEN STORAGE UNIT FOR

Nos. RECORD/STATIONARY ROOM) Providing

storage unit of size 2.5 mt x0.30 mt x2.10

mt(LxDxH) of ¾” thick BWP Plywood with 1.0mm

thick horizontal laminate expose sides and

1.0mm thick vertical laminate. the shelves shall

be provided @ 15”c/c or equal in height with

enamel painting in recessed surfaces. The

storage unit will have all necessary hardware,

laminate band and 0.45 mt X0.45 mt

teakwood/partal wood beading / moulding.

Recessed skirting (3/4”) finished with 1.0mm

thick laminate is present etc. complete

13 291.50 Providing and fixing eco-friendly light weight

Smt. calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S.

part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the

best thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine

fissured/ Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on

true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both

side) consisting of main ‘T’ runner suitably

spaced at joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of

size 24X28mm made out of 0.33mm (Minimum)

sheet spaced 1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid

of 1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of

mm thick (Minimum) sheet to be interlocked at

middle of the 1200X600mm panel to form grid of

size 600X600mm resting on periphery

walls/partitions on a perimeter wall angle

precoated steel of size (24X24X3000mm made

of 0.40mm thick (minimum) sheet with the help of

rawl plugs at 450mm centre to centre with 25mm

long dry wall screws @ 230mm interval and

laying 15mm thick Densified edges light weight

calcium silicate ceiling tiles of approved texture

(Fine Fissured/Cosmos/Spintone) in the grid

including, cutting /making opening for services

like diffusers, grills, light fittings, fixtures, smoke

SBD SECTION-7 BILL OF QUANTITIES-495

14 19.00 Providing and fixing sign board made of acrylic

Nos. sheet and fixing on door wall in first or second

alphabet as instructed in radium material

.Including all materials and labour etc.complete

as per detail drawing and instruction of engineer-

in charge. 760.00 Nos.

15 20.00 Providing and placing S.S Nickle crome plated

Nos. Dustbin having 254 mm dia & 356 mm height with

perforated S.S sheet including all necessary

fixture, fastners, fittings , labour material

machinary etc complete as selected and directed

by Engineer Incharge. Approved Make

16 30.00 Providing fixing And arranging Multiflex

Nos. rack/Library rack of size 1830(H) x 1300 (W) x

448(D) mm made high strength CR/HR steel

confirming to IS 5986:2002/ IS 2062 :2006 by

using steel confirming to is 5986- with minimum

yield strength of 255 MPa vertical angels of size

35x35x1.6mm with holes Slotted of flanges of

pitch 19.05 mm provided for adjusting loading

levels which are made up of 5 bend pannels of

1300 x 448 x 1.25 mm size with bend border

mounted on and C bends at all end with all

Endge finished with Trigular support plate

75X75X1.25 mm and all nuts and bolts etc finish

and all the components having powder coating

with thoroughly anti rust treatment including all

necessary fixture, fastners, fittings, labour

material machinary etc complete as per

photograph as selecte and directed by Engineer

Incharge Overall size : 1830(H) x 1300 (W) x

17 1 PROJECTOR SYSTEM FOR CONFERENC

Job ROOM Providing

supplying and installing 5000 lumens projector

with full HD lase with 150'' Diahonal 16:9 Screen

(Viesonic LS 740HD) along with audio system for

conference including 1 Amplifier, 1 Chairman Unit

and 8 Delegate Units inclusive of all cable

connections, installation and training. 1 65'' TV to

project also included.

SBD SECTION-7 BILL OF QUANTITIES-496

KHAMBHAT NAGARPALIKA KHAMBHAT

ESTIMATE FOR SUPPLY, INSTALLATION, TESTING, COMMISSIONING OF 65 KW GRID CONNECTED ROOFTOP SOLAR PROJECT

WITH 05 YEAR O & M AT NEW MUNCIPALITY BUILDING AT KHAMBHAT DIST. ANAND

Item No. & Description Qty. Rate 1% L.C. Per Amount

Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power Plant with Solar Panels (ALMM approved): Frame

Material : Anodized Aluminum alloy Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered Glass (AR

Coated), High efficency and positive power tolerance Pmax: 0/+5, Module Efficiency should be approx. 19.5%-22%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with Bypass diodes, 100% Electroluminescence

test to ensure error free Modules, Thep. temp. co-efficient of the PV module shall equal or better than -0.45%/degree C. Solar PV

modules of minimum fill factor 75% to be used. Unit Production:- More than 4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product

warranty and 25 year Linear Power Warranty includes all mechanical and electrical parameters of the Solar panel. Modules must be

complied to the DCR(Domestic content requirements). The Ration of AC to DC is 5:6 for the Installation capacity which are given in AC

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m)

≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Integrated protection of Inverter are Anti-islanding

Protection, Input Reverse Polarity Protection, Insulation Resistor Detection, Ground fault protection, Residual Current Monitoring Unit,

Output Over Current Protection, Output Short Circuit Protection, Output Over Voltage Protection, PV array string fault Protection.

Protection Degree: IP65, User Interface LCD & APP, Datalogger & Communication: GPRS / Wi-Fi.

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor Detection Integrated, Residual Current Monitoring Unit

Integrated, Output Over Current Protection Integrated, Output Short Circuit Protection Integrated, Output Over Voltage Protection

Integrated, Protection Degree: IP65, User Interface LCD & APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure:

The mounting (Rectangular pipe / square pipe / circular pipe) with requisite cross bars, nuts and bolts, etc. shall be Hot deep galvanized

with minimum 80micron coating. The Rectangular / square /circular hollow pipe section used for the structure should have a minimum

thickness of 2.0 mm. other than above, the material thickness should be minimum 2.5 mm. A certificate of a structural engineer

certifying the strength and stability of the mounting structure to withstand the weight and wind speed of 150 km/hour throughout the

life span of 25 years of the system, shall be submitted by the vendors. Hot Dipped Galvanized steel coils. suitable arrangement for base

plate for foundation , solar panel mounting, the structure should be suitable for carry the load of solar panel,wiring, sprinkler system etc.

with necessary foundation work/wall mount, j bolt, anchor fastner etc. the nut bolt used for installtion of stucture should be (SS 304)

quality.The ground clearance of the bottom most edge of solar panel shall not be less than 300 mm to 1200 mm or as per site’s

technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM Balane of System with necessary Swichgears (Suitabel size and

protection of ACDB & DCDB), inter connecting wiring, earthing system as per the CEIG drawing approval, lightining arrester system as per

the CEIG drawing approval, all liasoning work with various gov. dipartment like state nodal agency,DISCOM & CEIG is included in agency

(Excluding All charges namely GEDA Application fees, Solar connectivity Charges, Meter connectivity Charges, Meter testing Charges and

(E) Grid Tied Solar Power System: 51 - 100 kW (3 - phase)

The all inclusive comprehencive annual maintance contract cost covers yearly maintanance of solar Pv Modules, Inverter,

wiring,earthing,switchgears, etc with material and labour cost including preventive maintanance.The cost covers entire installation. AMC

also includes monthly site visit and inspection of project with submission of inspection and solar generation report. All parts should be

replaced/repaired if found faulty within specified time. Agency has to provide necessory licening work for warranty,power,Bidirectional

SBD SECTION-7 BILL OF QUANTITIES-497

Item No. & Description Qty. Rate 1% L.C. Per Amount

(D) 51KW-100KW System

Total Amount Rs. ..............

Total Amount Rs. ..............

Meter connectivity Charges Rs…...…......

Add GEDA Application fees Rs…...…......

Meter testing Charges and system stability/strenthning charges. Rs…...…......

Amount Rs. ..............

Add 18% GST Charge Rs…...…......

Net Amount Rs. ..............

SBD SECTION-7 BILL OF QUANTITIES-498

KHAMBHAT MUNICIPALITY, KHAMBHAT

NAME OF WORK : FIRE FIGHTING SYSTEM WORKS FOR KHAMBHAT MUNICIPALITY BUILDING, KHAMBHAT

SR.NO Qty. DESCRIPTION Total Rate Unit TOTAL

Electric Driven Main Pump

1 1.00 supplying, Installation, Testing & Commissioning of electric driven fire

pumps suitable for automatic operation consisting Fire Fighting Pump set

with Motor KIRLOSKAR MAKE MAIN ELECTRIC PUMPSET HML MOTOR:

22KW/30HP-2P/3PH, 900 LPM@60 mtr. Make Kirloskar

2 1.00 Supplying, Installation, Testing & Commissioning of electric Jockey pumps

suitable for automatic operation consisting Fire Fighting Pump set with

Motor KDS 844++ 7.5 (5.5) MOC: CI- Impeller. 7.5 hp. Make :- Kirloskar

3 1.00 Supplying, installation, testing and commissioning of diesel engine driven

main fire pump suitable for automatic operation and consisting of

following, complete in all respects, as required: (Diesel Driven Pump)

Horizontal type, multistage, centrifugal pump of cast of iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming to IS

1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine

conforming to relevant IS standard complete with auto starting

mechanism, 12/24 volts electric starting equipment, diesel tank, exhaust

pipe extended upto 10 m outside pump house duly insulated with 50 mm

thick glass wool with 1.0 mm thick aluminium sheet cladding, residential

silencer, instruments and protection as per standard specification, stop

solenoid for auto stop in the event of fault with audio indications, painted

with post office red colour etc. as required. M.S fabricated, common base

plate, coupling, coupling guard, foundation bolts etc. as required.Suitable

cement concrete foundation duly plastered and with anti vibration pads.

(2.2) 2850 lpm at 70 m Head

4 1.00 Panel for fire Pumps Panel for fire Pumps Control Panel For Fire Hydrant

Pump Electric Panel For Auto System Jockey Pump and Main Pump

Common Auto Control Panel suitable for Auto operation of above

electrical pumps having ASD starter for main pump. DOL starter for Jockey

Pumps having incoming MCCB, Bus bar, Indicating Lamps Push Buttons etc.

With low level indicator Make J&T

5 1.00 Pressure Gauges Burdon type pressure gauges With gauges cock male

wares/ Febig 0-14 Rang SS hion dia gauge with siphon waree / Febig/H.

Guru SS 4" Dall. Make -Baumer 2,250 nos.

6 2.00 Pressure Switch: Info's rT: 100 Supply Installation of Pressure Switch

approved make & Ranhe 0-10 kg/cm2. Connection size25(*) NB & SS

casing, Pressure Switch out put Should be with interface such that fire

water/ Diesel Driven Pump and jockey pump can start automatically at set

pressures Make:- Denfose

7 Cl Double Flanged Type Non Return Valve: Supply Installation testing &

commissioning of NRV Valve Heavy duty with necessary, sutaible flanges,

gaskets, nuts/bolts laboar work etc. Make- Hammer, L.P. DRP

1.00 100 mm Dia 8,840 nos.

1.00 80 mm Dia 5,280 nos.

SBD SECTION-7 BILL OF QUANTITIES-499

8 CI Sluice Valve Non Rising Spindle Type with necessary. sutaible flanges,

gaskets, nuts/bolts etc Make- Hammer,

1.00 100 mm Dia 9,840 nos.

1.00 80 mm Dia 6,530 nos.

9 Foot Valve Ball Type with necessary, sutaible flanges, gaskets, nuts/bolts

etc Make- Hammer,

1.00 80 mm Dia 9,230 nos.

10 6.00 Gun Metal Ball Valves 25 MM GSME rising Ball valve with handle as per

specification PN: 1.6 rated. Make: Matrix 1,050 nos.

11 External Piping Work Supply, Installation, Testing & Commissioning of

above ground Gl Pipe, For Water system Complete with Class "C" Fitting

like Nut & Bolts, Gasket,. Make: Asian, Apollo

55.00 100 mm C Class 1,930 mtrs.

15.00 80 mm C Class 1,370 mtrs.

8.00 50 mm C Class 910 mtrs.

15.00 25 mm C Class 450 mtrs.

12 78.00 Pipe Line Painting Charges: one coat of primers & one coats of enamel

paint of Asian / Eq. male and fire Red cooler 135 mtrs.

13 1.00 Water Storadge Suitable Underground RCC Tank. 50,00 LTR Capacity With

Labour Works. (Underground Rcc Tank) 9,45,000 nos.

14 1.00 Tank Foundation Works. For Underground Tank. 8,300 Job.

15 Butter Fly Valve with necessary, sutaible flanges, gasket nuts/bolts etc

Make:- DRP, Punit, L.P

16 6.00 Single Head Hydrant Valve 63 mm Dia ss SS Hydrant Valve Conforming IS

5290 complete with 80NB marching Flange, Downward Pattern ISI Mark.

Make: Aashi, Armor 5,840 nos.

17 6.00 MS Hose Box (Single Door) Ms Hose Box fabricated from 20 swg cold rolled

sheet with 3 mm glass front window, painted with powder coated p.o.red

out side & white inside Make:- Standerd

18 6.00 Hose Pipe With Instantaneous Coupling Type RRL Type Hose Of 63 mm dia

15 mtrs. Long Fire Hydrant Hose Pipes RRL Type-A as per IS: 636 Size

mm dia and 15mtr long with Nn-Controll Precolated, complete with Male-

Female Instantaneous coupling and wire binding. Test Pressure 23kg/cm2,

Working Pressure 14kg/cm2 Make: Torrent, New Age

19 6.00 Small Bore 3/4 "Dia Hose Reel Drum Set: MS Drum set with 30 mtrs.

Rubber Hose GM Shutoff Nozzle Complete set. Make- India, PE, New

20 6.00 Branch - Pipe Fire Hydrant Short Branch Pipe Nozzle SS With ISI Mark.

Make: Aashi, Armor 2,400 nos.

21 200.00 M.S. Bracket For Above Ground Pipe Lines Structural steel consisting of

channel, beam, angle, rod, square tube, U clamps etc for MS support of

pipe lines. 105 kg.

22 1.00 Anchor bolt with washer, Bends Reducers 11,000 Job.

23 1.00 POWER CABLES Suitable power cable from main panel & motors Wiring

Works. Make:- R.R, Polycab 27,000 Job.

24 1.00 Inlet Valve Siamese Connection For Fire Brigade Inlet: 100 dia Two way fire

brigade connection with 63 mm dia instantaneous inlet complete with all

necessary fittings. Make:- 9,260 nos.

25 1.00 Consultancy Charges For Site Supervion, Visits Drawing Preparation, Other

Miscellaneous Items reducer, nut bolt etc, With NOC Paper Works Charges.

26 1.00 Fire NOC Mandatory Requirement Signage's signage Bord 5,000 Job.

SBD SECTION-7 BILL OF QUANTITIES-500

FIRE ALARM SYSTEM CONVENTIONAL TYPE

27 1.00 Fire Alarm System Make.- Agni, Qutak 04 Zone Main Control Panel With

LCD Display Oriel 18,000 nos.

28 6.00 Manual Call Point Make:- Agni, Qutak 750 nos.

29 40.00 Smoke Detector With Base Make Agni, Qutak 1,600 nos.

30 8.00 Hooter Make-Agni, Qutak 1,100 nos.

31 400.00 Wiring, with material & Labour, Flexible FRLS 1.5 mm 2 core Wire Make-

R.R, Polycab (Considering as per actual measurement of used Qty.)

FIRE EXTINGUISHER

32 15.00 ABC 6 kg Fire Extinguisher. ABC 6 Kg Fire Extinguisher Mono Ammonium

Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Controllable

discharge mechanism Class A Rating 1A & Class B rating 13B as per IS

15683 ISI MARK (ABC Dry Chemical Powder - MAP 50%) MAHAVIR

33 8.00 Co2 4.5 Kgs. CO2 type Fire Extinguisher of capacity 4.5 kg filled with Co2

Gas as per IS 15222 with controll discharge mechanism fitted with Hose &

Hon applicable on Class B fire rating 21B confirms to IS 15683, bearing ISI

mark. Co2 Cylinder as per IS 7285 with PESO APPROVED MAHAVIR

SPRINKLER SYSTEM (Parking Area )

34 2.00 Sprinkler Alarm valve Assly. With alarm Motor Gong. with necessary,

sutaible flanges,gaskets, nuts/bolts etc 100 mm Make- HD

35 2.00 Drain Valve 50 NB with necessary, sutaible flanges,gaskets, nuts/bolts etc

Make- Matrix, L..P, Hammer 4,500 nos.

36 Butter Fly Valve with necessary, sutaible flanges, gaskets, nuts/bolts etc

Make- Matrix, L.P, Hammer

37 24.00 Quatzoid Bulb Sprinkler Supply & Installation of Sprinkler plain SS body UL

Listed finish with suitable size Pendant type spray with Coupling Nut etc.

Make- HD 480 nos.

38 100.00 M.S. Bracket and C chenal For Above Ground and Ceiling Pipe Lines

Structural steel consisting of channel, beam, angle, rod, square tube, U

clamps etc for MS support of pipe lines. 105 kg

39 External Piping Work Gl pipe Supply of GI pipe, "C" Class Supply,

installation, testing & commissioning of heavy grade piping as per ISI Mark.

Make-, Apollo, Asian, Tata

12.00 100 mm C Class 1,930 Mtrs.

36.00 80 mm C Class 1,370 Mtrs.

24.00 50 mm C Class 910 Mtrs.

96.00 25 mm C Class 450 Mtrs.

40 100.00 Pipe Line Painting Charges one coat of primers & 2 coats of enamel paint

of Asian / Eq. male and fire Red cooler. Make- Sunlac, Asian 135 Mtrs.

41 20.00 Tie Road with Washer for Pipe Support

42 20.00 Universal Clamp with Washer for Pipe Support 150 nos.

SBD SECTION-7 BILL OF QUANTITIES-501