SPECIAL REPAIR TO BLDG NO P 355 SINGLE OFFRS ACCN AND OTHER SANCTIONED WORKS UNDER THE AREA OF AGE BR I OF GE ARMY CENTRAL JODHPUR (9123/E8)

Amount

Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ. Bidders are requested to quote their rates accordingly. (ii) Makes of materials will be approved by GE in writing before commencement of work.

B/R WORK Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish out side MD land complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in flooring, path, sub base, and foundations etc., complete all as specified and as directed.

M&L for 50mm thick, PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) laid in alternative bays as in plinth protection including finishing the surface even & fair without using extra cement & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight, complete all as specified and directed.

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

Demolition of stone / boulder masonry walling, built in cement mortar or cement lime motar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.

M&L for cutting into old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6, complete all as specified and as directed.

M&L for squared rubble walling, Jodhpur type, regular coursed, well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.

All as per item No 9 here-in-above, but except stone.

Precast cement concrete block masonry using PCC 1:2:4, type B-1 solid blocks, 10 cm thick and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

Extra over square rubble stone walling, Jodhpur type, regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.

M&L for 10 mm thick backing coat in CM 1:4 over stone masonary surfaces incld. finishing the surface even & rough to receive tiling etc., complete all as specified and as directed.

M&L for Joint free glazed colour ceramic tiles (premium quality) of size 300X450X7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring, incld. finishing the surface even & rough to receive tiling etc., complete all as specified and as directed.

M&L for non skid / matt finish ceramic colour tiles (premium quality) of size 300 mm x 300 mm x 7 mm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for Dark shade Vitrified Ceramic tiles (double charged), 10mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Somany/ Kajaria/ Johnson as approved by GE.

All as per item No. 18 here-in-above, but as in dado/skirting, over & including 10 mm thick backing coat in CM 1:4, complete all as specified and as directed. Make : Somany/ Kajaria/ Johnson as approved by GE.

M&L for 15mm thick, screed bed or bedding layer in CM 1:6 surface finished even & rough to receive tiling/floor finish, complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as directed.

M&L 18-20 mm thick machine cut Kota stone in shelves and other places etc., laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing, complete all as specified and as directed.

M&L for 18-20 mm thick (telephone black shade) granite stone, as in cooking plateform, & similar work, machine cut, mirror polished best quality as per sample, including & over 15 mm thick screeding in CM1:4 including rounding of the edges & providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps, cooking plateform and other similar situations, complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish to out side MD land complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3, on ceiling / facia /RCC chajja etc of concrete surfaces, finished even & smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:6, on stone wall surface, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface, complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry, Jodhpur type, regular coursed built in cement mortar, complete all as specified and as directed.

M&L for Keyed pointing to square rubble masonry, Jodhpur type, regular course in CM 1:3, complete all as specified and as directed.

M&L for Flush pointing to stone slab joints Jodhpur type regular course in CM 1:3, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of wall and applying two coats of wall care putty (in two layers) 2-3mm each layer with fair finished and even surface and applying two coat of plastic emulsion paint, complete all as specified and as directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coats of wall care putty (in two layers) 2-3mm each layer on plastered surface, complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surface of wall including preparation of surfaces, complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surface of ceiling, including preparation of surfaces, complete all as specified and as directed.

M&L for one coat of white wash on old painted surface of wall, complete all as specified and as directed.

M&L for one coat of white wash on old painted surface of ceiling, complete all as specified and as directed.

M&L for preparation of old plastered or un-plastered surfaces of wall by brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping surfaces and applying two coats of cement base paint of approved quality & tint, complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth, including & over a coat of pink primer including preparation of surfaces, complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth, including & over a coat of red oxide primer including preparation of surfaces, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

S&F pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed.

S&F pressed steel frames of size 125X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.

M&L for mild steel framed work as in brackets for coller stands, framed steps/stairs, etc., complete using MS angle iron Steel bars gusset plate etc., Fe.290.Gde-E-165, complete all as specified and as directed.

S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straight portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc., flat iron fillet for necessary drilling boltinh or riveting etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L for fabrication of 18 mm thick PVC wardrobe shutter and 100 mm width frame including both side commercial face/mica finish alongwith fancy handle etc., complete all as specified and as directed by Engr-in-charge Note : All accessories will be measured & paid separatley

S&F 35mm thick factory made, second class hardwood, glazed and skelton door shutters, open rebated and prepared to receive glass/gauze etc(without sash bar) edges of framing plain chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge in SSR Pt I-1991 section 8 clause 8.24 (b), including stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples & aluminium grill medium grade mess size 50X500mm fixed at outer edge of door, complete all as specified and as directed.

S&F factory made flush shutters 35 mm thick, solid core construction, with block board and plywood face panels, both faces is covered with decorative face veneer with lipping/frame to match with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process, complete all mortic lock and handel arremgment, complete all as specified and as directed.

S&F of 35mm thicks factory, made 2nd Class hard wood, partly glazed and partly skeleton shutters, open rebated and prepared to receive glass or wire gauze etc., edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.,size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a), complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing., complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

Taking down steel window/ventilator, complete all as directed.

S&F Factory made box type, steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer (with or without cooler opening), complete all as specified and as directed.

S&F Factory made box type, steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer (with or without cooler opening), complete all as specified and as directed.

S&F Factory made, box type steel ventilator with glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and as directed.

S&F Factory made, box type steel ventilator without glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and as directed.

S&F Supply and fabrication of Mild steel guard bars and welded to window frames, complete all as specified and as directed.

S&F of aluminium anodized,tower bolt extruded section of size 200 mm long, complete all as specified and as directed.

S&F aluminum anodised handle extruded section of size 150mm long, complete all as specified and as directed.

S&F of aluminium alloy anodised sliding door bolt with hasp and staple bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and as directed.

S&F of stainless steel butt hinges 100mm size, complete all as specified and as directed.

S &F of mild steel butt hinges 100mm size, complete all as specified and as directed.

S&F 100mm size single action door spring hinge, complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring 40mm long, complete all as specified and as directed.

Demiolition of reinforced cement concrete of staircase, landing, chajjas and similar suspended work of any description and any position not otherwise, complete all as directed.

M&L 5 cm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc not exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and as directed.

M&L for Jodhpur stone roof slabs self faced 7.5cm to 10cm thick, 25cm to 35cm wide ,hoisted and set jointed and grouted in cm 1:3, complete all as specified and as directed.

S&F of 4mm thick pinheaded sheet glass panes of size not exc 0.5 Sqm fixed with oil putty, complete all as specified and as directed.

S&F for 3mm thick plain glass ordinary quality & glazing, complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 Mix (using 20mm graded crushed stone aggregate) as in hold fast iron fixing including necessary form work, complete all as specified and as directed.

S&F flat iron for hold fast and similar work conforming to Fe-290 Gde-E-165 fixed with welding and necessary item, complete all as specified and as directed.

S&F of stainless steel decorative finial (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 25 mm dia curtain rods as per sample as in repairs including brakets knob and all fitting, complete all as specified and as directed by Engr-in-charge

M&L for powder coated Anodised aluminium frame, (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partition, shutters with one or more rebates, aluminium section weighing 0.55 kg/m, appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM including joining cleat for fixing etc., complete all as specified and as directed by Engr-in-charge.

S&F rubber beading (best quality), complete all as specified and as directed.

S&F Door closer hydraulically regulated, Aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg fixed, complete all as specified and as directed.

S&F brass body 2 levers mortice lock vertical type size 100 mm for aluminium door (as per sample), complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet including solvent cement and PVC frame, complete all as specified and as directed.

M&L powder coated anodised aluminium shutter(minimum thickness of powder coating 50 micron) for door, aluminium section weighing 0.55 kg/m, appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, screws etc., complete all as specified and as directed.

M&L for fabrication of glazed windows/louvered ventilators etc using powder coated anodised aluminium sections (minimum thickness of powder coating 50 micron) for frames, aluminium section weighing 0.55 kg/m with or without rebate for hinged/sliding windows (two track/three track), ventilators etc, appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM with louveres having suitable mechanism for tilting, 'U' shaped fillets for securing jalies etc & the likes & fixed in position, complete all as specified and as directed by Engg-in-charge. Note : Glass panes & aluminium wiremesh shall be measured & paid for seperately.

S&F powder coated anodised aluminium deco grill as per sample fixed to aluminium frame work of windows & ventilators, complete all as specified and as directed.

S&F aluminium alloy wire cloth 0.35 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with aluminium wire staples, complete all as specified and as directed.

S&F precast cement concrete post of size 60cm long 100mmx100mm, of PCC 1:2:4 Type B-1 (using 20mm graded aggregate) fixed in CM 1:4 with grooves for fixing of RCC jali, complete all as specified and as directed.

S&F precast cement concrete louvers and jallies, 35mm thick (measured solid) including all moulding, excluding frame, PCC 1:2:4 type B-0 (using12.5mm graded crushed stone aggregate) set in CM 1:4, complete all as specified and as directed.

S&F of PTMT bath cabinet with mirror fixed with and including chromium plated brass screws and wooden cleats size 355mmx455, complete all as specified and as directed.

S&F in repair MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.

S&F as in repair, stainless steel sink made of 1mm thick sheet, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarfwall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and as directed. Make : Bluestar/ Jayna/ Nirali as approved by GE.

S&F PVC connections of 15mm size with PTMT nuts of 600mm long, complete all as specified and as directed.

S&F chromium plated waste coupling size 32mm full threaded, complete all as specified and as directed.

S&F in repair health faucet 8mm dia and 1.2mtr long with wall hook and flexible tube, complete all as specified and as directed. Make : Jaquar Cat No. ALD-573 or or equivalent in Kohler/ Cera as approved by GE.

S&F in repair two piece EWC snow white with soft close seat cover, cistern, twin flush fitting including accessories set, complete all as specified and as directed. Make : Cera Cat. No. S1020101 CALIBRE, S1060101, B1510101 Carina, B1810101 special or its equivalent model in Parryware/ Hindware as approved by GE.

S&F in repair wash basin (Ivory /Superior colours) of size 510 x 400 mm with full pedestal and fixing accessories set, complete all as specified and as directed Make : Cera Cat. No: S2040101 & Pedstal cat No. S2090101 or its equivalent model in Parryware / Hindware as approved by GE.

S&F in repair chromium plated fancy type, quarter turn 15mm bore angular stop cock with wall flange, complete all as specified and as directed. Make : Jaquar Cat No. OPP-15053PM or or equivalent in Kohler/ Cera as approved by GE.

S&F in repair chromium plated fancy type, quarter turn 15mm bore bib cock with wall flange, complete all as specified and as directed. Make : Jaquar Cat No. OPP-15037PM or equivalent in Kohler/ Cera as approved by GE

S&F in repair Pillar cock with wall flange chromium plated fancy type quarter turn 15mm bore, complete all as specified and as directed. Make : Jaquar Cat No.OPP-15001PM or equivalent in Kohler/ Cera as approved by GE

S&F in repair concealed Stop cock, wall flange chromium plated, fancy type, quarter turn 15mm bore, complete all as specified and as directed. Make : Jaquar Cat No. OPP-15083KPM or equivalent in Kohler/ Cera as approved by GE

S&F in repair chromium plated towel ring, with round flange, complete all as specified and as directed. Make : Jaquar Cat No. AKP-35721P or equivalent in Kohler/ Cera as approved by GE

S&F Soap dish holder with flange chromium plated, complete all as specified and as directed. Make : Jaquar Cat No. AKP-35731P or equivalent in Kohler/ Cera as approved by GE

S&F in repair Toilet paper holder chromium plated toilet paper holder, complete all as specified and as directed. Make : Jaquar Cat No. AHS-1553 or equivalent in Kohler/ Cera as approved by GE

S&F in repair glass shelf with CP frame of size 600 x 150 mm long toughed glass, complete all as specified and as directed. Make : Jaquar Cat No. AKP-35771P or equivalent in Kohler/ Cera as approved by GE

S&F in repair chromium plated fancy type quarter turn 15mm bore 2 way bib cock with wall flange, complete all as specified and as directed. Make : Jaquar Cat No. ORP-10041PM or equivalent in Kohler/ Cera as approved by GE

S&F Cast iron nahani trap with CP grating out let diameter 75mm including jointing to waste pipe fixed in cement mortar 1:1, complete all as specified and as directed.

S&F single towel rail 600mm long fixed with chormium plated brass screws, complete all as specified and as directed. Make : Jaquar Cat No. AKP-35711PS or equivalent in Kohler/ Cera as approved by GE.

S&F CP Wal mixture 3-in-1 system with provision for both hand shower and over head shower complete with 115 mm bend pipe, connecting legs & wall flange, including tele shower with 1.50 mtr long flexible tube and overhead shower of size 150mmx150mm and shower arm of size 400 x 25 x 25 mm square shape for wall mounted showers with flange, complete all as specified and as directed. Make : Jaquar Cat No. CON-281KN, OHS-35495, HSH-1797, SHA-571 & SHA-455L400 or equivalent in Kohler/ Cera as approved by GE

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as directed.

S&F 100mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor, complete all as directed.

S&F 75mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 100mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed.

S&F 75mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed.

S&F100mm CI branch pieces single socketed 'Y' equal or unequal, complete all as specified and as directed.

S&F 75mm CI branch pieces single socketed 'Y' equal or unequal, complete all as specified and as directed.

S&F100mm CI bends any radius, complete all as specified and as directed.

S&F 75mm dia CI bend with oval acess door fixed to pipe, complete all as specified and as directed.

S&F 100mm dia CI vent cowl fixed to pipe, complete all as specified and as directed.

S&F 75mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia, complete all as specified and as directed.

S&F in repair of chromium plated shower rose 100mm dia round shape, complete all as specified and as directed.

S&F in repair 25mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia, complete all as specified and as directed.

S&F as in repairs 15mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type), complete all as specified and as directed. Make : Jaquar/ Kohler/ Cera as approved by GE.

Dismantling water tanks of capacity exc 500 ltrs but not exc 1000 ltrs and removing to store, complete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded polythene water storage tank, triple layer, white colour (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I including tank lid cover complete with fixing arrangement, complete all as specified and as directed. Make : Sintex/ Rotex as approved by GE.

S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repair Stainless steel Plate Rack of size 750 X 600 X 200mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and directed. Make : Nirali/ Jayna/ Bluestar as approved by GE.

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but not exc 4.00 sqm & depth not exc 60cm, complete all as directed.

Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, complete all as specified and as directed by Engr-in-Charge.

M&L for 18 mm thick solid PVC sheet UPVC Coated Celuka printed in one of two different colours( with wood grain printed pattern /ivory colour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc., complete all as specified and as directed.

Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as specified and as directed.

S&F '0' degree clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and as directed. Make : Hettich

S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, complete all as specified and as directed.

M&L 50 mm thick PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) for water tank plinth, complete all as specified and as directed.

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud, complete all as specified and as directed.

Providing precast RCC man hole cover (using 20mm graded aggregate) set in CM 1:6, complete all as specified and as directed.

M&L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups, complete all as specified and as directed.

Writing letters or figures (Black Roman, Italic or Indian not exc 30cm high with thick paint , complete all as specified and as directed.

Taking down or up GI steel tubing and connection including cleaning for refixing or removal to store, complete all as directed. (a) 25 mm dia

-Ditto- All as per Item No. 138 above but 20 mm dia

-Ditto- All as per Item No. 138 above but 15 mm dia

S&F GI water tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid In floors, complete all as specified and as directed. (a) 25 mm dia,

-Ditto- All as per Item No. 141 above but 20 mm dia

-Ditto- All as per Item No. 141 above but 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.

Excavating in trenches in any type of soil, not exc 1.5m wide and not exc 1.5m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exc. 10 Sqm on plan and not exc 1.5 m in depth and getting out, complete all as specified and as directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm, complete all as specified and as directed.

Removing excavated material at a level not exc 1.5 m above the starting point, complete all as specified and as directed.

M&L for cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150 mm dia pipe, complete all as specified and as directed.

Supply & laying jointing and testing 150mm bore reinfirced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and forming benching as required, complete all as specified and as directed.

Taking down existing old tar-felt from RCC roof, stone and other treatment (brick bat etc.,) carefully including cleaning roof surface by wire or coir brush and removing all grits ,stone,fungus,moss and finally washing down with water to the entire satisfaction of Engr-in-charge and removing debris and rubbish out of the premises to a distance exc. 1.0 km but not exc 2.5 Km, complete all as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as over roof for making good depression/undulation to make the existing as filling in depression of roof slab, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof kerb including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) Top layer : PCC 1:2:4 type B-1 (using 12.5mm graded crushed stone aggregate) in roof padding for maintain slop on roof finished even and smooth with using extra cement NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause No. 21.3, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.

"Supply only" Polyster triangular fibres as secondary reinforcement in all types of Concrete and Morter, complete all as specified and as directed.

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and as directed.

M&L hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed

S&F rolled mild steel sections and running rails and guides for sliding doors as in main and cross beams, hip and jack rafters, purlins where connected to common rafters, fixed with angle cleats or other connecting plate etc., conforming to Fe 410 W Gde- E- 250) quality- A, complete all as specified and as directed.

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed.

Supply and fix stop valve,15mm bore, fancy type, brass chromium plated, concealed type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed Make : Jaquar cat No. FUS-29083K (exposed part) & ALD-083 (Regular body) / Kohler/ Cera as approved by GE

S&F for Angle Cock cast copper alloy chromium plated 2 in 1, suitable for 15 mm bore, Complete all as per sample and all as specified and as directed. Make : Jaquar / Kohler/ Cera as approved by GE

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface, complete all as specified and as directed.

S&F PVC connections 450mm long, 15mm size with PTMT nuts brass fly and washers on both ends complete all as specified and as directed.

S&F vitreous ware wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and as directed. Make:- Hindware Cat No. Cat. No.: 20087 (S-10) Pastel or equivalent in / Parryware / Cera as approved by GE

S&F10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, Sleek fresh low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed. Make:- Hindware Cat No. Cat. No.: 20087 (S-10) Pastel or equivalent in / Parryware / Cera as approved by GE

S&F viterous china bowl urinal flat back, of size 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement etc complete all as specified and as directed. Make:- Hindware cat No. 60002 Pastel or its equivalent model in Parryware / Cera as approved by GE

S&F vitreous china ware wash hand basin, white, flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore (low density polythene ) LDPE flexible waste pipe, complete all as specified and as directed. Make:- Hindware cat No. 10098 Pastel or its euivalent model in Parryware / Cera as approved by GE

S&F 500 ltrs capacity rotational moulded polythene water storage tank three layered white colour (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and as directed. Make:- Sintex / Rotex as approved by GE

M&L of PVC (SWR) 75 mm bore single socketed in any length with rubber ring joints and laid in trenches or in floors complete all as specified and as directed.

M&L of PVC (SWR) 75 mm bore single socketed in any length with rubber ring joints and fixed to wall complete all as specified and as directed.

M&L of PVC (SWR) 110 mm bore single socketed in any length with rubber ring joints and fixed to wall complete all as specified and as directed.

S&F of PVC (SWR) 75 mm bore bends any radius complete all as specified and as directed.

S&F of PVC (SWR) 110 mm bore bends any radius complete all as specified and as directed.

S&F of PVC (SWR) 110mm bore vent cowl complete all as specified and as directed.

S&F 75mm dia out let, PVC ( SWR) floor trap plain with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed.

S&F 150 mm bore Salt glazed stone ware drain pipe, grade 'A', laid in trenches and cement joint in cement mortar 1:1 complete all as specified and as directed

M & L for PCC 1:3:6, type C-1 [using 20 mm graded crushed stone aggregate] in surface channels and drains including forming fair finished drain or channel using extra cement including forms, moulds, mitred / stooped ends complete all as specified and as directed.

Excavating in post holes or similar holes each not exc 0.50 cu.m, getting out soft/loose soil, returning,fillig in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing srplus soil soil to a distance not exc. 50 m, complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete, concrete block for iron strut or post complete all as specified and as directed .

Non skid ceramic coloured tiles (premium quality) of size 6 to 7 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

S&F stainless steel sink with drainage board, for kitchen or laboratory, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed. Make : Nirali/ Jayna/ Bluestar as approved by GE.

S&F stainless steel plate rack of size 1200mm X 900mm X 200mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and directed. Make : Nirali/ Jayna/ Bluestar as approved by GE.

E/M WORKS Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces, complete all as directed.

Taking down DB with MCB any type/any size & single pole and neutral enclosure with two pin and earth plug with MCB/MCCB/ including all connecting accessories, complete all as directed.

Taking down existing old sub main wiring of any size and make, complete all as directed

M&L for modular point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators complete for the following, complete all as specified and as directed :- (a) One light/fan/bell point controlled by one, one way switch.

- Ditto- All as per item No. 185 above but one 3 pin 5 or 6 Amps socket outlet on same board, complete all as specified and as directed.

-Ditto- All as per item No. 185 above but one 3 pin 5 or 6 Amps socket outlet on independent board, complete all as specified and as directed.

-Ditto- All as per item No. 185 above but with 2.5 Sqmm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board, complete all as specified and as directed.

S&F modular switch 1 way 6 Amp, 1 module, single pole complete all as specified and as directed. Make : Legrand/ ABB/ Schneider

S&F modular switch 1 way 16 Amp, single pole, 1 module, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider

S&F modular socket outlet 6 Amp, 2/3 pin combined 2 module, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider

S&F modular socket outlet 6 Amp/ 16 Amp, 6 pin combined 2 module, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider

S&F modular bell push 6 Amp, 1 module, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider

S&F bell electric multi music type type 230 volts single pole, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F modular fan step regulator, 120W, 2 module, hum free and connecting electrically, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F lamp holder insulated body polycarbonate type with back plate, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F LED lamp 9 W, complete all as specified and as directed by the Engr-in-Charge. Make : Philips/ Havells/ Bajaj

S&F ceiling rose surface bakelite 3 terminals 230 Volts AC with polycarbonate body, complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/ Legrand/ Havells

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long, complete all as specified and as directed. Make : Bajaj Cat No. BCLSB 20 WH or Equivalent in Philips/ Havells as approved by GE.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. Make : Philips/ Bajaj/ Havells

S&F bulk head fittings of Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head fitting , luminaire comprising of high brightness LEDs, IP54 protection, complete all as specified and as directed. Make : Philips/ Bajaj/ Havells.

S&F bldg security LED Light Luminaire of 35 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 32mm dia bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and as directed. Make : Philips/ Bajaj/ Havells

Taking down and refixing / Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan after Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc., complete all as directed.

M&L for making openings for exhaust fan/ventilating fan in stone wall and making good by plastering/rendering etc around the wall openings, complete all as specified and as directed.

S&F exhaust fan, heavy duty steel body, AC single phase 300 mm sweep complete with louvers including fixing/grouting of frame & connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed by Engg-in-charge. Make : Havells/ Bajaj/ CG

S&F MCB 20 Amp ‘C’ curve type, 230 volts, 10 KA single pole and neutral enclosure with two pin and earth plug socket complete with one single pole , complete all as specified and as directed. Make : Legrand/ ABB/ Schneider

S&F and testing factory made sheet metal enclosure for MCB DB SPN 8 way 240 volt with double door, IP - 43 protection duly fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type, complete all as specified and as directed by Engr-in-Charge Make : Legrand/ ABB/ Schneider

S&F MCB single pole and neutral 240 volts 63 Amps, with rupturing capacity 10 KA, 'C' curve type, with over load and short circuit protection, complete all as specified and as directed by Engg-in-charge. Make : Legrand/ ABB/ Schneider

S&F MCB single pole 230 volts rating from 6 to 32 amps, with rupturing capacity 10 KA, 'C' curve type, with over load and short circuit protection, complete all as specified and as directed by Engg-in-charge. Make : Legrand/ ABB/ Schneider

S&F Vertical Distribution Board, double Door, suitable for 'A' Frame 4 Pole MCCB 100A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, complete all as specified and as directed by Engg-in-charge. Make : Legrand/ ABB/ Schneider Note : MCCB & MCB shall be measured and paid for separately.

S&F MCCB, 'A' Frame, thermal adjustable magnectic setting, Ics = 75% 25 kA, 415V, 100 Amp, 4 Pole with over load and short circuit protection, complete all as specified and as directed by Engg-in-charge. Make : Legrand/ ABB/ Schneider

S&F for in repairs sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed by Engr-in-Charge. NOTE: Two runs of 6.00 Sqmm cable with one run of 6.00 Sqmm earth wire and PVC conduit shall be measured & paid for as one length.

S&F for in repairs sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed by Engr-in-Charge. NOTE: Two runs of 4.00 Sqmm cable with one run of 4.00 Sqmm earth wire and PVC conduit shall be measured & paid for as one length.

Taking down unserviceable electric geyser any type, applying two coats painting and refixing in same position by suitable size of fasteners, complete all as directed by Engr-in Charge.

Taking down carefully electric meter any type and capacity and depositing in MES store yard and refixing in same position, complete all as directed by Engr-in Charge.

Supply and lay in trenches/on wall/on pole/in duct /through protection pipe, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables heavy duty LT cable, 1100 volts grade with aluminium conductor cross sectional area 50 Sqmm 3.5 core size including retrieving/taking out/taking down old unserviceable cable from duct/trenches/pipes/pole/wall etc. including brick cover and protection pipe and disconnecting the connections, complete all as specified and as directed. Note:- Excavation and earth work, sand cushioning, PCC cable cover and protection pipe etc. shall be measured and paid for separately.

M&L for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 25 x 4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion, complete all as specified and as directed by Engr-in-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer, complete all as specified and as directed by Engg-in-charge. Note :- Punned thickness shall only be measured and paid.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250x150mm x40 mm, complete all as specified and as directed.

M&L for galvanised steel tubing, light grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore, complete all as specified and as directed. Make : Prakash/ Tata/ Jindal

S&F sink cock, chromium plated fancy type 15mm bore with regular swinging spout, with wall flange, complete all as specified and as directed. Make : Jaquar cat No. LYR-38347 or its equivalent model in Kohler/ Cera as approved by GE

S&F of 3mm thick pinheaded sheet glass panes of size not exc 0.5 Sqm fixed with oil putty, complete all as specified and as directed.

S&F rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars barred iron doors; chowkhat, doors with MS sheet, ladders ;framed balusters walk ways railings framed work of water tanks and similar work conforming to Fe-290Gde E-165 complete all as specified & directed by Engineer-in-charge

Supply, fixing, testing & commissioning of LED street light fitting 30/45 Watt 230 V AC, IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.5 mtr long 32mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified Make : Philips/ Bajaj/ Havells

S&F Prewired distribution board (sheet metal enclosures) with suitable rated 200 Amps bus bar for Single door IP-43 DB's of apporved gauge conforming to IS relevant, SPN 4 way, 240 volt complete all as specified and directed by Engr-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make :-Legrand/ ABB / Schneider.

S&F MCB single pole 240 volts rating from 6 to 32 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, complete all as specified and as directed by Engg-in-charge. Make : Legrand/ ABB/ Schneider

S&F MCB single pole and neutral, 240 volts rating from 40 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, complete all as specified and as directed by Engg-in-charge. Make : Legrand/ ABB/ Schneider

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia, complete all as specified and as directed by Engg-in-charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed nominal cross sectional area 10 Sqmm 2 core nominal cross sectional area, complete all as specified and as directed by Engg-in-charge.

Supply only water proofing compound, ISI Marked, complete all as specified and as directed by Engg-in-charge.

Note:- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

mahalaxmi enterprises

M/s Ajay kumar Garge

M/S SUMAN ENTERPRISES

SURESH TRADERS