Providing New shutters at Chittumala chira in Kizakke Kallada Grama panchayath

Amount

Ring bund & balling out water

OD17123/2024-2025:RING BUND Type-I-Putting up ring bund as per approved shape 3.5m bottom width, 1.5m topwidth using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay covering with polythene sheets for leak proofing,conveyance and royalty charges of earth to form bund for an average height 2.00m including labour for dismantling the bund after completion of the work, etc. complete

OD24816/2024-2025:Taking out the mud debris and cleaning the bay, removing the plastic and bio waste and disposing at a suitable place 50m away from site

OD13869/2024-2025:60.2.3 Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection, cost of fuel, lubrication oil, and other stores pay of staff, etc complete

Dismantling

OD13867/2024-2025:Dismantling of canal shutter (up to 2 Tonne weight)/hoisting bridge/embedded parts etc and stacking at a distance of a 100m including hire charge of machinery, labour etc complete as directed by departmental officer at site.(weight of unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting unit as 80%)

Concrete works

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

OD13884/2024-2025:Supply of MS Round bar

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Supply and Fabrication of gates

OD13881/2024-2025:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges

OD13882/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.

OD13883/2024-2025:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platfurm and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

Supply, fabrication and erection of Embedded parts

OD13876/2024-2025:Supply of MS round bar including cost of conveyance

OD13877/2024-2025:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges.

OD13878/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.

OD13879/2024-2025:Fabrication and errection of Embedded parts for canal shutters ( up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

Supplying and fixing in correct poisition with specified initial interface the rubber seal

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supply & Fabrication of hoisting bridge

OD13870/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.

OD13871/2024-2025:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges.

OD13872/2024-2025:Supply of MS round bar (above 12mm dia) including cost of conveyance

OD13873/2024-2025:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platfurm and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

Providing hoisting mechanism

OD13874/2024-2025:Supply of screw shaft 63mm outer dia , head pitch of 12.7 mm root dia 50.3 mm using EN -8 shaft Including cost of all material, labour,tools etc. complete.

OD13875/2024-2025:Providing ofworm and pinion having a lifting speed of around 5.00 cm/min for hand operation including cost of all materials, labour, hire charges and conveyance etc complete

Erection of the gates,hoisting bridge,handrail,ladder etc

OD13880/2024-2025:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including handrails, ladder, etc. for the same including. alignment correcting and setting complete including the cost of all labor, machinery, incidental and conveyance, lead and lift charges etc complete but excluding the cost of materials already supplied

Painting

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD13896/2024-2025:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE

OD13897/2024-2025:Supply and fixing of Bush type CS Roller having OD 130mm x ID 55mm x thread width 50mm with Al Bronzel bush OD 55xID40xwidth50 and SS shaft Dia 40 x 100L including cost of all materials, labour , incidental and conveyance charges etc. complete

OD13899/2024-2025:Trail run the gates with its hoisting mechanism etc. including cost of all materials, machinery ,labour, all lift and lead, incidental and conveyance charges etc. As per instruction of departmental officers in charge

SAI ENGINEERING (BID ID -2010613)

Bidder Name

SAI ENGINEERING

JOBIN JOSEPH