Provn of certain minor works and rev works under GE Dehradun.

Surface excavation not exc. 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

Material and labour for hardcore of gauge n exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

Material and labour for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) filling and mass concrete etc complete all as specified and directed.

Material and labour for prepolished rubber moulded coloured (Red/ Yellow) machine pressed/ Vibromatic precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

Material and labour for sand filling 25mm thick under floors or in foundations including watering and consolidation under interlocking tiles sand cushion all as specified and directed.

Material and labour for stone kerb of roughly squared stones (Lime or sand stone stone) of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and as directed.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour for brick work with old size bricks straight or curved on plan exc 6m radius built in cement motar CM 1:6 complete all as specified and as directed

Material and labour for brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in1:4 complete all as specified and directed

Material and labour for 15 mm thick rendering in cement mortar 1:4 on on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed

Supply and fixing of reinforced cement concrete pipes 150mm dia, class NP2, laid & jointed complete with collars complete all as specified and directed.

Excavation in post holes or similar each n exc 0.50 cum getting out, returning, filling and in ramming earth round in layer n exc 25 cm watering and removing surplus soil to a distance n exc 15 m and making good surface in soft/loose soil complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 (40 mm graded aggregate) in foundation, sub base filling and mass concrete complete all as specified and directed

Supply and fixing of mild steel work as Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) FE-410 W (gde-E-250) quality-B all complete all as specifed and directed.

Material and labour for prepartion of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing of pre painted galvalume alumninium zinc coated GI based corrugated steel sheet 0.50 mm of an colour having tensile stength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as complete all as specified and directed

Supply and fixing of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Material and labour for cement concrete 1:2:4 type B0 40 mm thick in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Supply and fixing of mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe-410W(Gde E-250) complete all as specified and as directed.

Material and labour for RCC (nominal mix) type B1 1:2:4 { using 20 mm graded stone aggregate) in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, deck slabs, foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc and mass concrete complete all as specified and directed.

Material and labour for formwork flat rough finished to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work exceeding 10cm but not exceeding 20cm wide opening complete all as specified and directed.

Material and labour for formwork to soffits of suspended slabs such as roof slab, floor slab,landing and similar work not exc 200 mm thick horizontal or sloping ,flat rough finished surfaces of concrete complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparing of new surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Material and labour for 75 mm thick cement concrete 1:4:8 type D2 40mm graded stone aggregate as in subbase complete all as specified and directed

Material and labour for 25mm thick cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate) as in levelling course etc complete all as specified and directed.

Material and labour for non skid coloured joint free ceramic tiles 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors e.t.c in floors etc set and jointed in neat cement slurry @ 3.00 Kg per square metre and pointed in coloured cement to match of coloured tiles over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

Material and labour for coloured joint free ceramic tiles size 375 mm x 250 mm x 7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 Kg per square metre and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.50 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided.

Supply and Fix factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle,steel peg stay,complete without glazing bars,dovetailed or welded complete all as specified and as directed

Supply and Fix factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle,steel peg stay,complete with glazing bars,dovetailed or welded complete all as specified and as directed

Supply and Fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and Fix 4 mm thick plain sheet glass,ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sqm in each pane and complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Material and labour for cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed

Supply and fixing of 1000 litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including supply & fix 20 mm dia GI light grade wash out pipe 450 mm long with plug and 20 mm dia GI light grade over flow pipe 600 mm long with fitting including 20mm bore brass ball valve etc complete all as specified.

Supply and fixing of 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fixing of vitreous china wash hand basin, white flat back, size 550x400mm fixed on and including cast iron cantilever bracket ,32 mm dia brass waste coupling and 32 mm dia PVC waste pipe,grating dome ,etc including fixing of tap,waste fitting etc complete all as specified and as directed

Supply and fixing of 15 mm dia swan neck pillar tap (for oval type WHB)brass chromium plated with capstan heads,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing of brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule complete all as specified and as directed

Supply and fixing of 15 mm bore bib taps,chromium plated cast copper alloy long body,screwed down,screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing of chromium plated brass soap dish fixed to wall with chromium plated brass screwed and cup washer complete all as specified and directed.

Supply and fixing of brass chromium plated towel rail,20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Supply and fixing of 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

Supply and fixing of 75 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall etc complete all as specified.

Supply and Fix 110 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall etc complete all as specified.

Supply and Fix 75 mm PVC (SWR) bends T reducer any radius with rubber ring joints,fixed to wall/floor/in trenches complete all as specified and directed.

Supply and Fix 110 mm PVC (SWR) bends T reducer any radius with rubber ring joints,fixed to wall/floor/in trenches complete all as specified and directed.

Material and labour for construction of 25 users Septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab in M-25 concrete covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. (Ref TD/217 of CE Bareilly Zone) all as shown on drawings etc complete all as specified and directed.

Material and labour for construction of soakage wells excavation, in any type soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, of size 1.2 M dia X 3.0M deep (Ref CE Bareilly Zone TD) all as shown on drawings etc complete all as specified and directed.

Material and labour for construction of soakage wells excavation, in any type soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, of size 1.8 M dia X 3.0M deep (Ref CE Bareilly Zone TD) all as shown on drawings etc complete all as specified and directed.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and as directed .

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Material and labour for RCC Type B-1, 1:2:4 nominal mix (using 20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

Material and labour for providing precast cement concrete 1:2:4 nominal mix type B1 (using 20 mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified.

Supply and fixing of mild steel, TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fixing of mild steel, TMT bars 06 to 08 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Discription all as per item No 61 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Material and labour for preparing of new surfaces of ceilings and applying three coats of white wash on ceiling complete all as specified and directed.

Material and labour for coloured digital ceramic tiles in vertical surface as in walls, dado, etc. 450 x 300 x 7 mm thick set and jointed in neat cement slurry @ 3 Kg / Sqm and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:3) complete all as specified.

Supply and Fixing of powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below and making good of wall surface to match with existing surface complete all as specified and directed : - Frame : 44.5 x 44.5 mm x 1.80 mm thick Middle rail : 44.5 x 44.5 mm x 1.80 mm thick Glazing: 5 mm thick frosted glass fixed with rubber gasket and aluminium beading. Wire gauge: stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium beading.

Supply and Fix powder coated aluminium grill with frame fixed to by means stainless steel screws complete all as specified and directed.

Supply and Fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed .

Supply and Fix 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed .

Supply and Fix 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

Supply and fixing of 150 mm long aluminium anodised handles of fabricated type complete all as specified and as directed.

Supply and fixing of Butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed .

Supply and fixing of 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy & fixed and compete all as specified and directed.

Supply and fixing of mild steel framed work such as door frames, grills, gratings, etc, with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 including necessary welding, drilling hole complete all as specified and directed

Supply and fixing of Vitreous China Urinals, full stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in CM 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, CP waste coupling, waste pipe, automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete. complete all as specified and as directed .

Supply and Fix vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, including 600 mm long CI P-trap, connection to trap and to flushing pipe, anti syphonage pipe etc, and making good to floor complete all as specified and as directed.

Supply and Fix 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

Supply only PVC connection 15 mm dia 450 to 600 mm long with brass fly nut at both ends complete all as specified and as directed.

Supply and Fix 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including supply & fix 20 mm dia GI light grade wash out pipe 450 mm long with plug and 20 mm dia GI light grade over flow pipe 600 mm long with fitting complete all as specified.

Supply and fixing of ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size complete all as specified and as directed.

Supply and Fix in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

Supply and Fix 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed.

Supply and Fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W(Gde E-250) quality-A complete all as specified and as directed.

Material and labour for pre-polished pavement coloured chequred tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti skid properties laid over 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) with WPC & with finished surfaces even and smooth complete all as specified and as directed. Note: WPC will be measured separately under respective item of this schedule.

Supply only integral waterproofing compound complete

Material and labour for 150 mm Salt-glazed stoneware drain pipes laid in trenches and jointed as specified complete all as specified.

Material and labour for Concrete bed in 1:3:6 type C2 to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed

Supply and Fix Modular switch single pole one way 6 Amp ..

One light point/ Exhaust fan point controlled by one-one way switch.

One three pin 5 Amp socket on independent board

Description all as per item No 91 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.

Supply and Fix switch piano flush, button type 5 Amp SP 250 V AC complete all as specified & directed.

Supply and Fix switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

Supply and Fix socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

Supply and Fix socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete al as specified.

Supply and Fix ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 220 V AC.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix in replacement Exhaust fan 300 mm sweep, 900 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed.

2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed.

Material and labour for laying, jointing and testing in replacement underground XLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs complete for the following cables of cross sectional area all as directed: Notes: (a) Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately. (b) Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses. (c) Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor.

16.0 Sqmm, 2 core, complete all as specified and directed.

50.0 Sqmm, 4 core, complete all as specified and directed.

Material and labour for sand cushioning & covering of UG cable using crushed metal sand in trenches for cable protection complete all as specified and directed.

Material and labour for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed.

Material and labour for GI tubing medium grade (ISI marked) with all fitting/acessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc all as specified and directed of size 40mm dia complete all as specified & directed

Supply and Fix MCB double pole 240 Volt 10 KA 40 Amp 'B' series conforming to ISI marked including connection with suitable size copper lugs etc complete all as specified and directed.

Supply and Fix MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked including connection with suitable size copper lugs etc complete all as specified and directed.

Supply and Fix sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 4 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 02 MCB SP as out going complete all as specified and directed

Supply and Fix of wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

Supply and fixing of exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep complete and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

Supply and Fixing Integral LED Bldg security Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours,including bracket complete all as specified and directed.

Supply and install Tower AC complete with cordless remote control unit capacity 2 TR with highest star rating available in market, operating at 230 V 50 HZ supply. (a) Fixing the cooling unit with grouting nuts,cutting grooves to wall for gas pipe and water drain pipe complete. (b) Suppply and fixing,cutting bent to shape copper pipe of appropriate size from outdoor unit to indoor unit by cutting wall including brazing copper pipe fixing union all as required at site. (c) Supply and fixing PVC pipe 20 mm dia transpaent heavy duty for drainage pipe. (d) Insulation of both copper pipe with insulating material and covering the complete pipe with PVC casing pipe complete. (e) Charging of correct quantity of refrigerant R410A/R32 or compatible refrigerant for Towe AC after necessary brazing/fixing of both the outdoor/indoor unit and testing complete on load to obtain 18 degree celsius. NOTE-Supply and fix copper tubing,connecting cable,outdoor unit bracket,drain pipe with insulation requires apart from standard company packing shall be deemed to be included in unit rate

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.

Supply and Fix Distribution Box MCB protected socket with plastic enclosure (surface monuting) socket complete with one single pole MCB 25 Amp 240 Volts protected complete all as specified and directed.

Supply, fixing and testing of DB VTPN 8 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including mounting arrangement for DPX3 MCCB 250 Amps four pole 415 volts as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 etc complete including connection with suitable size coper lugs/thimble/glands etc complete all as specified and directed.

Supply and Fixing of MCCB 160 Amps four pole 415 volts thermal magnetic release ICU=100% ICS having breaking capacity 36 KA including connection terminal strip complete including connection with suitable size coper lugs/thimble/glands etc complete all as specified and directed.

Supply and fixing of MCB SP 6 to 32 Amp 'C' series 10 KA repturing capacity including connection with suitable size copper lugs etc complete all as specified and directed.

Material and labour and installation Bus bar, factory fabricated bus bar chamber out door pedestal type made out of 2.0 mm thick CRCA sheet size 750x500x400mm duly painted with powder coating, simens grey / RAL fitted with four Nos aluminium bus bar of capacity 400 Amps duly mounted epoxy insulator, cable connections of incoming and outgoing cables duly insulated PVC heat shrinkable sleeve 1.1 KV grade including one No MCCB 250 Amps, 04 pole, 50 KA, with adjustable thermal setting Ics = 100% Icu, including glands c/p lugs etc including 50x50x6mm angle iron frame 450mm height above ground level and 450mm below ground level, angle iron frame shall be embedded in PCC (1:2:4) type B1 block of size 200x200x200mm complete all as specified and directed

Material and labour for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal to a distance not exc. 50m, testing on completion complete all as specified & directed . NOTE: (i) Earth lead strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth copper from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

Supply and fix air termination,single pointed aluminium rod 12mm dia and 300mm long, complete all as specified and as directed.

Supply and fixing earth continuity conductor or main earthing lead of Aluminium strip of 25x3.15mm with saddles and fixing screws for roof conductor and down conductors above ground, complete all as specified and as directed.

Supply and fixing earth continuity conductor or main earthing lead GI strip of 32x6mm thick fixed to wall or batten or recess or buried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc, complete all as specified and as directed.

Supply and fixing of test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw, complete all as specified and as directed.

Material and labour for earthing complete with copper plate 60×60cm ×3.15mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with 20×3mm copper strip earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test point etc. in and including light grade GI protection pipe 40mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal to a distance not exc. 50m, testing on completion complete all as specified & directed . NOTE: (i) Earth lead strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth copper from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

Note :- Amount of credit of NIL for retrieved materials is mentioned in Schedule of Credit Page No NIL of tender documents in pdf form which will be deducted offline while acceptance of tender.

Please Enable Macros to View BoQ information