SPECIAL REPAIRS TO BADMINTON COURT BLDG NO P57 AT Y JUNCTION INCLUDING CHANGE OF COLOUR SCHEME AND LIGHTING AT DOLPHIN HILL PROVISION OF INTERLOCKING PAVER BLOCKS ALONG THE ROAD IN J SECTOR AT DOLPHIN HILL ARBORICULTURE WORKS AT VIEW POINT 1 AT DOLP

Amount

Dismantling of floor, hearth and wall tiles / stone slabs of any description or thickness as in floors, skirtings etc laid bedded and pointed in any mortar and removal of rubbish to out side MD land complete all as specified and as directed.

Demolition of Unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] and removing rubbish to out side MD land complete all as specified and as directed.

M & L for 25 mm thick, PCC 1:2:4, Type B1, using (20mm graded aggregate) as in sub base of flooring complete all as specified and as directed.

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:6, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors including screed bed or bedding layer in cement mortar 1:6, 15 mm thick complete all as specified and as directed. Make : Bharat Tiles & Marble Pvt Ltd / National Tiles & Industries Pvt Ltd / Nitco Tiles Pvt Ltd / Nimco Tiles / Metro Tiles Bombay / Vitco Tiles Bombay / Mehtab Tiles

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

S&F Glazed coloured ceramic tiles in vertical surface 450 x 300x 7 mm / 350 x 250 x 7 mm thick ,set and jointed in neat cement slurry and pointed in white or cloured cement over and including 10mm thick backing coat CM of 1:4 complete all as specified and as directed. Note : Rate includes for cutting for offsets etc Make : Johnson / Kajaria / Orient / Cera / Asian

M & L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.11 Sq. M but not exceeding 0.18 Sq. M, in skirtings/dado etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including backing coat in cement mortar 1:4, 10 mm thick, complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or plain cement concrete 1:2:4 type B1 as required n. exc. 150 Sq Cm complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed.

S&F 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. Make : Astral / Flow guard

S&F 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. Make : Astral / Flow guard

S & F Vitreous China Ware Wash hand basin white/coloured, table top model fixed on palteform complete all as specified and as directed. Make : Jaquar Model No ARS-WHT-39903 or equivalent in Parryware / Hindware

S & F Vitreous china urinal, bowl type, flat back, white of size 465 X 355 X 265mm, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe, complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F Vitreous Ware wash down water closet (couple closet), including all necessary fittings and fixtures complete all as specified and as directed. Make of WC :M/s.Jaquar Model No. LYS-WHT-38853SSM or equivalent in Parryware / Hindware

S&F 15mm bore bib taps 2 way cast copper alloy, with capstan heads, chromium plated, screwed down high pressure and fly nuts, screwed for iron pipe complete all as specified and as directed. Make : Jaguar Model No. LYR-38041 or equivalent in Parryware / Hindware

S&F 15mm bore pillar taps fancy type, Swan neck 2 way cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. Make : Jaguar Model No. LYR-38021 or equivalent in Parryware / Hindware

S& F Vitreous china Urinal partition of size 310mm x 700mm fixed to wall complete all as specified and as directed.

S& F PTMT Urinal spreader of approved colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and as directed.

S & F in repairs CP Hand Shower Health Faucet with 8mm dia, 1.00 m long flexible tube, wall hook, non return valve complete all as specified and as directed. Make: Jaquar Allied range Model No. ALD-577 / Plumber / Parko / Jal

S&F 15mm bore Stop cock / Angle cock cast copper alloy, with capstan heads, chromium plated, screwed down high pressure and fly nuts, screwed for iron pipe complete all as specified and as directed. Make : Jaquar Cat. No. LYR-38053 or equivalent in Parryware / Hindware

S & F in repairs Brass chromium plated bottle traps for wash hand basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap of size 32mm complete all as specified and as directed.

S & F Cast Iron Nahani trap of 100 mm outlet with stainless steel grating including jointing to waste pipe fixed in cement concrete Type B1 1:2:4. up to 16th storey complete all as specified and as directed.

S&F for 15mm bore, 600 mm long PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends and fixed in repairs complete all as specified and as directed. Make : Prayag / Watertec

Taking down eaves gutters and PVC rain water pipes (of any or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F PVC (SWR) pipe [ ISI MARKED ] 75 mm bore single socketed with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince

S&F PVC (SWR) pipe [ ISI MARKED ] 110 mm bore single socketed with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince

Taking down chowkats or frames not exceeding 1.5sq.m. each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4sqm each with shutters without taking off shutters from frame complete all as specified and as directed.

M & L for making good under cills or over arches, lintels, bressumers including all pinning etc., finishing with cement mortar 1:6 complete all as specified and as directed.

S&F factory made UPVC white colour three track sliding window made of extruded profiles with wall thickness of 2.3mm (+/-0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding interlock (one vertical length in each shutter) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing hardware, EPDM gasket, 1.2mm+/-0.2mm thick galvanised steel frame (30mm x 18mm) 2Nos sliding sash (30mm x 18mm) 2Nos sliding mesh sash (26mm x 10mm) profile to be inserted in required profile. Frame will be fixed to the wall with 8mm x100mm long fasteners. Hardware (touch lock of zinc alloyed (white powder coated) steel roller system, stainless stell wire cloth 0.36mm nominal dia of wire and avarage width of aperture 1.4mm and required accessories of area n.exc 3.00 sqm fixed from ground to 3rd floors complete all as specified and as directed. Make:- H2O solution/ Equivalent E-In-C approved manufacturer. (Note:- The unit rate excluded cost of glass but included all other connected accessories)

S&F 7 mm thick aluninium grills of make " Decogrill" model DG 104 including cost of surrounded aluminium channel of suitable size complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S & F 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty/in aluminium sections in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

Dismantling of water tanks exceeding 500 litres and not exceeding 1000 litres capacity complete all as specified and as directed.

S&F 500 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I and 20mm dia Ball Valves of PTMT, high pressure, with polythene float and fly nut complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S&F Looking mirror of 6mm thick bevelled edges of first quality Belgium glass fixed with SS studs complete all as specified and as directed. Make of mirror : Saint Gobian / Modi / Asahi

M&L for Powder Coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F Powder coated aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

M&L for 12 mm thick, prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination and other side with balancing white lamination fixed with screws to timber frame work complete all as specified and as directed. Make : Anchor / Novopan / Deco Board / Bhutan Board / Kitply / Eco Board / Archidlam / Asis / Greenply Industries

Supply anf Fix in opening Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap insert for top rail & bottom rail:Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed. Note for Item No. 44 & 45 : Make of PVC frame / shutter / ventilator shall be of make : Sintex / Nandi / Rajshri Plasti Wood.

S & F [ISI marked] 150 mm long Extruded Aluminium alloy handles, cast type, anodised complete all as specified and as directed.

S & F Aluminium anodised barrel Tower Bolt (ISI Marked) of size 150 mm long of extruded section complete all as specified and as directed.

S & F 100 mm long medium weight Stainless Steel Butt hinges (ISI Marked) complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including provision of 2Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed

M & L for cutting chases, pinning in, making good the facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc, cutting n.exc. 10cm girth in stone, concrete block or concrete slab for concealling the water supply pipes complete all as specified and as directed

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to out side MD land complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls with cement mortar 1:4 complete all as specified and as directed

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls with cement mortar 1:6 complete all as specified and as directed

M&L for preparing newly plastered / untreated surfaces of internal walls, application of wall care putty (any number of coats required) and sand papering etc and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty: JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper: Asian / Nerolac / Berger (All 1st quality)

M & L for preparation of newly plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer over putty [any number of coats] including sand papering on external walls / ceiling surfaces to obtain smooth finish complete all as specified and as directed. Make : (i) Weather coat paint :Apex ULTIMA from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux (ii) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Note: The quoted rate is inclusive of necessary steel double scaffolding upto 5 floors.

M & L for preparation of old plastered or unplastered surfaces including brooming down or steel wire brushing and applying one coat of white wash on ceilings complete all as specified and as directed.

M & L for complete removal of existing treatment on walls, preparation of wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer over two coats of putty including sand papering on external walls / ceiling surfaces to obtain smooth finish including necessary scaffolding and safty precations up to 5th storey complete all as specified and as directed. Make : (i) Weather coat paint :Apex from Asian Paints / All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux (ii) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M&L for preparation of old painted wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Make: M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

M&L for Preparation of old painted steel surfaces of any description, over 10cm in width or grith, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

Material and Labour for preparing old surfaces of WALLS by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and as directed.

Dismantling of Plain or Corrugated Steel sheeting of any gauge, thickness of roof in roof coverings, complete all as specified and as directed.

Supply and Fix Pre-painted galvalume aluminum zinc coating corrugated profile sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH/ JINDAL

Supply and Fix Pre-painted galvalume aluminum zinc coating plain sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH / JINDAL

S & F in repairs Double Action Floor Spring Hydraulically Regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. Make : Godrej / Ozone / Kelvin

S & F in repairs door clooser Aluminium extrude section body hydraulically regulated , designation No.1 , universal type , suitable for door shutters uoto700 mm in width and of weight upto 35 kg complete all as specified and as directed. Make : Godrej / Everite / Priya

Mild steel work as in grills and gratings,framed guard bars, barred iron doors, ladders, railings and with ends of bars shouldered and / or riveted or forged into spikes and similar work confirming to Fe 290 Gde E165 complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

M&L 18mm to 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like laid on screed bed in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M & L for prepolished Granite (of any type) work 20 mm thick machine cut (table rubbed and polished) as in skirting / dado and the like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including backing coat in cement mortar 1:4, 10 mm thick and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone complete all as specified and as directed.

S & F Stainless Steel SS 316 L grade 50 mm bore tubular staircase railing by cutting through the existing wall of stair case and attatching the fastners of railing to the existing reinforcement by welding and making good the disturbed portion,two globes of Stainless steel of dia 50 mm including welding buffing and polishing complete all as specified and as directed.

M & L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/ dense soil complete all as specified and as directed.

M&L for hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulders complete all as specified and as directed.

M&L for 100mm thick Plain Cement Concrete 1:4:8 Type D-2 (using 40mm graded granite stone aggregates) as in subfloors, sub-bases, floors and pavings / hardstanding etc complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100mm thick, M-50 Grade finished with grey cement and pigmentcomplete all as specified and as directed. Make : Ultra, Eurocon, Duracrete, Mehatab as approved by GE.

M&L for providing precast cement concrete (1:3:6) type C-2 in kerb stones, apex stones, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match and set in cement mortar (1:4) complete all as specified and as directed.

Removing excavated soils exceeding 250m and not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Surface dressing not exceeding 15cm deep getting out soft/loose soil complete all as specified and as directed

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed

Removing excavated soils not exceeding 50 m to create a mound complete all as specified and as directed.

Supply, laying and spreading of approved red soil and manure mixture in the ratio 3:1 to a level surface complete all as specified and as directed. Note: (a) Red soil well seived 90% passing throush IS seive of 10mm size, free from stone rubbish like lurops, stones, roofs and other foreign materials suitable for gardening. the soil should be fresh from quarry. the colour of the soil generally be red and the cost including of all royality and carriage, all T&P, taxes, octroi etc. all complete all as specified and as approved bt GE (b) Supply at site manure well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. the colour of manure shall be black. the manure screened through sieve at 1.5 designation 4.75 micron including carriage at site.

S&F of the sapplings of decorative bordering plants aklifa all colours / duranthas / kuppeya / paisoneya alba / pykus pand / mirchi mini gold / ticoma orange / decorative flowers / red knight / mini almond including all trasnportation and labour charges and incl of excavation in any type of soil for planting the sappling, pac sixe 8" to 15" and height 2ft to 5ft complete all as specified and as directed.

S&F of the sapplings of decorative designery plants fish tails / fox tails / pandanas / pikas black big / almond including all trasnportation and labour charges and incl of excavation in any type of soil for planting the sappling, pac sixe 8" to 15" and height 2ft to 5ft complete all as specified and as directed.

S&F and planting of best quality date palms of height not less than 6ft complete all as specified and as directed.

Providing special plants for middle of the park pikas prestige / spikas panda / timple trees / green bush palm / palm trees / pikas black

S&F best quality carpert grass and covering with red earth organic manure, farm yard manure and neem cake etc, all as specified and as directed

Supply and fixing of cst iron garden benches 03 seater as approved by GE (06Nos approx 110kg each) complete all as specified and as directed.

Supply and drawing on surface or ceiling concealed PVC Conduit with 2 runs of single core 4 Sqmm (for phase and neutral) and one run of single core 4.0 Sqmm (earth wire) of multi stranded FRLS copper conductor cable PVC insulated unsheathed, 1100 Volts, ISI marked for sub main wiring Note: Two runs 4 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

Supply and drawing on surface or ceiling concealed PVC Conduit with 2 runs of single core 2.5 Sqmm (for phase and neutral) and one run of single core 2.5 Sqmm (earth wire) of multi stranded FRLS copper conductor cable PVC insulated unsheathed, 1100 Volts, ISI marked for sub main wiring Note: Two runs 2.5 Sq.mm. cable, one run of 2.5 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

S&F ceiling rose surface bakelite 65 X 50mm two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

S&F in replacement Distribution Board, TPN 4 Way ,Double door 415V complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S&F in replacement Distribution Board, SPN 6 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S & F MCB SPN 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. Make: Indo Asian / L&T / C&S / Schneider / Legrand

S & F MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811122 to 811129 / L&T / C&S / Schneider / Legrand

S & F MCB TPN 40A Amps 415 Volts C curve, complete all as specified and as directed. Make: Indo Asian / STANDARD / HAVELLS/Schneider

S & F in repair twin core, PVC insulated multistranded copper flexible conductor cable, 1100 Volts grade ISI marked of size 0.75 Sqmm complete all as specified and as directed.

S & F GI tubing 50mm bore medium grade (ISI Marked) conforming to IS - 1239 [Part - 1] with all fittings including fixing / mounting the same for freely hanging in air for holding 06 Nos of tube light fitting in existing truss / bar / ceiling with proper arrangement of nut bolt and clamp including welding work if required complete all as specified and as directed. Make : Prakash / Tata / Zenith / Jindal (Note : Rate shall be included for necessary scaffolding and safety measures where required at site )

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I and pouring extra clay soil of quantity not less than one cubic metre into the earth pit and also removal of soil to a distance not less than 50 m including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm c/c reinforcement both ways, watering funnel, 20 mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

Taking down of sub main wiring of any type / any capacity complete all as specified and as direced

ARCHANA ENGINEERING ENTERPRISES

K SATYANARAYANA ENTERPRISES